rails-units 1.3.1

data/lib/ruby_units/unit.rb

@@ -0,0 +1,1272 @@
+require 'date'
+if RUBY_VERSION < "1.9"
+  require 'parsedate'
+  require 'rational'
+end
+# = Ruby Units
+#
+# Copyright 2006-2011 by Kevin C. Olbrich, Ph.D.
+# 
+# See http://rubyforge.org/ruby-units/
+#
+# http://www.sciwerks.org
+#
+# mailto://kevin.olbrich+ruby-units@gmail.com
+#
+# See README for detailed usage instructions and examples
+#
+# ==Unit Definition Format
+#
+#  '<name>'  => [%w{prefered_name synonyms}, conversion_to_base, :classification, %w{<base> <units> <in> <numerator>} , %w{<base> <units> <in> <denominator>} ],
+#
+# Prefixes (e.g., a :prefix classification) get special handling
+# Note: The accuracy of unit conversions depends on the precision of the conversion factor.
+# If you have more accurate estimates for particular conversion factors, please send them 
+# to me and I will incorporate them into the next release.  It is also incumbent on the end-user
+# to ensure that the accuracy of any conversions is sufficient for their intended application.
+#
+# While there are a large number of unit specified in the base package, 
+# there are also a large number of units that are not included.
+# This package covers nearly all SI, Imperial, and units commonly used
+# in the United States. If your favorite units are not listed here, send me an email
+#
+# To add / override a unit definition, add a code block like this..
+#
+#  class Unit < Numeric
+#   @@USER_DEFINITIONS = {
+#    <name>'  => [%w{prefered_name synonyms}, conversion_to_base, :classification, %w{<base> <units> <in> <numerator>} , %w{<base> <units> <in> <denominator>} ]
+#    }
+#  end
+#  Unit.setup
+class Unit < Numeric
+  # pre-generate hashes from unit definitions for performance.  
+  VERSION = Unit::Version::STRING
+  @@USER_DEFINITIONS = {}
+  @@PREFIX_VALUES = {}
+  @@PREFIX_MAP = {}
+  @@UNIT_MAP = {}
+  @@UNIT_VALUES = {}
+  @@OUTPUT_MAP = {}
+  @@BASE_UNITS = ['<meter>','<kilogram>','<second>','<mole>', '<farad>', '<ampere>','<radian>','<kelvin>','<temp-K>','<byte>','<dollar>','<candela>','<each>','<steradian>','<decibel>']
+  UNITY = '<1>'
+  UNITY_ARRAY= [UNITY]
+  FEET_INCH_REGEX = /(\d+)\s*(?:'|ft|feet)\s*(\d+)\s*(?:"|in|inches)/
+  TIME_REGEX = /(\d+)*:(\d+)*:*(\d+)*[:,]*(\d+)*/
+  LBS_OZ_REGEX = /(\d+)\s*(?:#|lbs|pounds|pound-mass)+[\s,]*(\d+)\s*(?:oz|ounces)/
+  SCI_NUMBER = %r{([+-]?\d*[.]?\d+(?:[Ee][+-]?)?\d*)}
+  RATIONAL_NUMBER = /([+-]?\d+)\/(\d+)/
+  COMPLEX_NUMBER = /#{SCI_NUMBER}?#{SCI_NUMBER}i\b/
+  NUMBER_REGEX = /#{SCI_NUMBER}*\s*(.+)?/
+  UNIT_STRING_REGEX = /#{SCI_NUMBER}*\s*([^\/]*)\/*(.+)*/
+  TOP_REGEX = /([^ \*]+)(?:\^|\*\*)([\d-]+)/
+  BOTTOM_REGEX = /([^* ]+)(?:\^|\*\*)(\d+)/
+  UNCERTAIN_REGEX = /#{SCI_NUMBER}\s*\+\/-\s*#{SCI_NUMBER}\s(.+)/
+  COMPLEX_REGEX = /#{COMPLEX_NUMBER}\s?(.+)?/
+  RATIONAL_REGEX = /#{RATIONAL_NUMBER}\s?(.+)?/
+  KELVIN = ['<kelvin>']
+  FAHRENHEIT = ['<fahrenheit>']
+  RANKINE = ['<rankine>']
+  CELSIUS = ['<celsius>']
+  TEMP_REGEX = /(?:temp|deg)[CFRK]/
+
+  SIGNATURE_VECTOR = [:length, :time, :temperature, :mass, :current, :substance, :luminosity, :currency, :memory, :angle, :capacitance]
+  @@KINDS = {
+    -312058=>:resistance, 
+    -312038=>:inductance, 
+    -152040=>:magnetism, 
+    -152038=>:magnetism, 
+    -152058=>:potential, 
+    -39=>:acceleration,
+    -38=>:radiation, 
+    -20=>:frequency, 
+    -19=>:speed, 
+    -18=>:viscosity, 
+    0=>:unitless, 
+    1=>:length, 
+    2=>:area, 
+    3=>:volume, 
+    20=>:time, 
+    400=>:temperature, 
+    7942=>:power, 
+    7959=>:pressure, 
+    7962=>:energy, 
+    7979=>:viscosity, 
+    7961=>:force, 
+    7997=>:mass_concentration,
+    8000=>:mass, 
+    159999=>:magnetism, 
+    160000=>:current, 
+    160020=>:charge, 
+    312058=>:resistance, 
+    3199980=>:activity, 
+    3199997=>:molar_concentration, 
+    3200000=>:substance, 
+    63999998=>:illuminance, 
+    64000000=>:luminous_power, 
+    1280000000=>:currency, 
+    25600000000=>:memory,
+    511999999980=>:angular_velocity, 
+    512000000000=>:angle, 
+    10240000000000=>:capacitance, 
+    }
+  
+  @@cached_units = {}
+  @@base_unit_cache = {}
+  
+  def self.setup
+    @@ALL_UNIT_DEFINITIONS = UNIT_DEFINITIONS.merge!(@@USER_DEFINITIONS)
+    for unit in (@@ALL_UNIT_DEFINITIONS) do
+      key, value = unit
+      if value[2] == :prefix then
+        @@PREFIX_VALUES[key]=value[1]
+        for name in value[0] do
+          @@PREFIX_MAP[name]=key
+        end    
+      else
+        @@UNIT_VALUES[key]={}
+        @@UNIT_VALUES[key][:scalar]=value[1]
+        @@UNIT_VALUES[key][:numerator]=value[3] if value[3]
+        @@UNIT_VALUES[key][:denominator]=value[4] if value[4]
+        for name in value[0] do
+          @@UNIT_MAP[name]=key
+        end
+      end
+      @@OUTPUT_MAP[key]=value[0][0]        
+    end
+    @@PREFIX_REGEX = @@PREFIX_MAP.keys.sort_by {|prefix| [prefix.length, prefix]}.reverse.join('|')
+    @@UNIT_REGEX = @@UNIT_MAP.keys.sort_by {|unit_name| [unit_name.length, unit]}.reverse.join('|')
+    @@UNIT_MATCH_REGEX = /(#{@@PREFIX_REGEX})*?(#{@@UNIT_REGEX})\b/    
+    Unit.new(1)
+  end
+  
+  include Comparable
+  attr_accessor :scalar, :numerator, :denominator, :signature, :base_scalar, :base_numerator, :base_denominator, :output, :unit_name
+
+  def to_yaml_properties
+    %w{@scalar @numerator @denominator @signature @base_scalar}
+  end
+  
+  # needed to make complex units play nice -- otherwise not detected as a complex_generic
+ 
+  def kind_of?(klass)
+    self.scalar.kind_of?(klass)
+  end
+ 
+  def copy(from)
+    @scalar = from.scalar
+    @numerator = from.numerator
+    @denominator = from.denominator
+    @is_base = from.is_base?
+    @signature = from.signature
+    @base_scalar = from.base_scalar
+    @unit_name = from.unit_name rescue nil
+  end
+  
+  # basically a copy of the basic to_yaml.  Needed because otherwise it ends up coercing the object to a string
+  # before YAML'izing it.
+  if RUBY_VERSION < "1.9"
+    def to_yaml( opts = {} )
+      YAML::quick_emit( object_id, opts ) do |out|
+        out.map( taguri, to_yaml_style ) do |map|
+          for m in to_yaml_properties do 
+            map.add( m[1..-1], instance_variable_get( m ) )
+          end
+        end
+      end
+    end
+  end
+  
+  # Create a new Unit object.  Can be initialized using a String, a Hash, an Array, Time, DateTime
+  # Valid formats include:
+  #  "5.6 kg*m/s^2"
+  #  "5.6 kg*m*s^-2"
+  #  "5.6 kilogram*meter*second^-2"
+  #  "2.2 kPa"
+  #  "37 degC"
+  #  "1"  -- creates a unitless constant with value 1
+  #  "GPa"  -- creates a unit with scalar 1 with units 'GPa'
+  #  6'4"  -- recognized as 6 feet + 4 inches 
+  #  8 lbs 8 oz -- recognized as 8 lbs + 8 ounces
+  #
+  def initialize(*options)
+    @scalar = nil
+    @base_scalar = nil
+    @unit_name = nil
+    @signature = nil
+    @output = {}
+    if options.size == 2
+      # options[0] is the scalar
+      # options[1] is a unit string
+      begin
+        cached = @@cached_units[options[1]] * options[0]
+        copy(cached)
+      rescue 
+        initialize("#{options[0]} #{(options[1].units rescue options[1])}")
+      end
+      return
+    end
+    if options.size == 3
+      options[1] = options[1].join if options[1].kind_of?(Array)
+      options[2] = options[2].join if options[2].kind_of?(Array)
+      begin
+        cached = @@cached_units["#{options[1]}/#{options[2]}"] * options[0] 
+        copy(cached)
+      rescue 
+        initialize("#{options[0]} #{options[1]}/#{options[2]}")
+      end
+      return
+    end
+    
+    case options[0]
+    when Hash
+      @scalar = options[0][:scalar] || 1
+      @numerator = options[0][:numerator] || UNITY_ARRAY
+      @denominator = options[0][:denominator] || UNITY_ARRAY
+      @signature = options[0][:signature]
+    when Array
+      initialize(*options[0])
+      return
+    when Numeric
+      @scalar = options[0]
+      @numerator = @denominator = UNITY_ARRAY
+    when Time
+      @scalar = options[0].to_f
+      @numerator = ['<second>']
+      @denominator = UNITY_ARRAY
+    when DateTime, Date
+      @scalar = options[0].ajd
+      @numerator = ['<day>']
+      @denominator = UNITY_ARRAY
+    when /^\s*$/
+      raise ArgumentError, "No Unit Specified"
+    when String
+      parse(options[0])
+    else
+      raise ArgumentError, "Invalid Unit Format"
+    end
+    self.update_base_scalar
+    raise ArgumentError, "Temperatures must not be less than absolute zero" if self.is_temperature? &&  self.base_scalar < 0
+  
+    unary_unit = self.units || ""
+    if options.first.instance_of?(String)
+      opt_scalar, opt_units = Unit.parse_into_numbers_and_units(options[0])
+      unless @@cached_units.keys.include?(opt_units) || (opt_units =~ /(#{TEMP_REGEX})|(pounds|lbs[ ,]\d+ ounces|oz)|('\d+")|(ft|feet[ ,]\d+ in|inch|inches)|%|(#{TIME_REGEX})|i\s?(.+)?|&plusmn;|\+\/-/)
+        @@cached_units[opt_units] = (self.scalar == 1 ? self : opt_units.unit) if opt_units && !opt_units.empty?
+      end
+    end
+
+      unless @@cached_units.keys.include?(unary_unit) || (unary_unit =~ /#{TEMP_REGEX}/) then
+        @@cached_units[unary_unit] = (self.scalar == 1 ? self : unary_unit.unit)
+      end
+
+    [@scalar, @numerator, @denominator, @base_scalar, @signature, @is_base].each {|x| x.freeze}
+    self
+  end
+
+  def kind
+    return @@KINDS[self.signature]
+  end
+  
+  def self.cached
+    return @@cached_units
+  end
+  
+  def self.clear_cache
+    @@cached_units = {}
+    @@base_unit_cache = {}
+    Unit.new(1)
+  end
+    
+  def self.base_unit_cache
+    return @@base_unit_cache
+  end
+  
+  #
+  # parse strings like "1 minute in seconds"
+  #
+  def self.parse(input)
+    first, second = input.scan(/(.+)\s(?:in|to|as)\s(.+)/i).first
+    second.nil? ? first.unit : first.unit.to(second)
+  end
+  
+  def to_unit
+    self
+  end
+  alias :unit :to_unit
+  
+  # Returns 'true' if the Unit is represented in base units
+  def is_base?
+    return @is_base if defined? @is_base
+    return @is_base=true if self.degree? && self.numerator.size == 1 && self.denominator == UNITY_ARRAY && self.units =~ /(?:deg|temp)K/
+    n = @numerator + @denominator
+    for x in n.compact do 
+      return @is_base=false unless x == UNITY || (@@BASE_UNITS.include?((x)))
+    end
+    return @is_base = true
+  end  
+  alias :base? :is_base?
+  
+  # convert to base SI units
+  # results of the conversion are cached so subsequent calls to this will be fast
+  def to_base
+    return self if self.is_base?
+    if self.units =~ /\A(?:temp|deg)[CRF]\Z/
+      if RUBY_VERSION < "1.9"
+        @signature = @@KINDS.index(:temperature)
+      else
+        #:nocov:
+        @signature = @@KINDS.key(:temperature)
+        #:nocov:
+      end
+      base = case 
+      when self.is_temperature?
+        self.to('tempK')
+      when self.is_degree?
+        self.to('degK')
+      end
+      return base
+    end
+
+    cached = ((@@base_unit_cache[self.units] * self.scalar) rescue nil)
+    return cached if cached
+
+    num = []
+    den = []
+    q = 1
+    for unit in @numerator.compact do
+      if @@PREFIX_VALUES[unit]
+        q *= @@PREFIX_VALUES[unit]
+      else
+        q *= @@UNIT_VALUES[unit][:scalar] if @@UNIT_VALUES[unit]
+        num << @@UNIT_VALUES[unit][:numerator] if @@UNIT_VALUES[unit] && @@UNIT_VALUES[unit][:numerator]
+        den << @@UNIT_VALUES[unit][:denominator] if @@UNIT_VALUES[unit] && @@UNIT_VALUES[unit][:denominator]
+      end
+    end
+    for unit in @denominator.compact do
+      if @@PREFIX_VALUES[unit]
+        q /= @@PREFIX_VALUES[unit]
+      else
+        q /= @@UNIT_VALUES[unit][:scalar] if @@UNIT_VALUES[unit]
+        den << @@UNIT_VALUES[unit][:numerator] if @@UNIT_VALUES[unit] && @@UNIT_VALUES[unit][:numerator]
+        num << @@UNIT_VALUES[unit][:denominator] if @@UNIT_VALUES[unit] && @@UNIT_VALUES[unit][:denominator]
+      end
+    end
+
+    num = num.flatten.compact
+    den = den.flatten.compact
+    num = UNITY_ARRAY if num.empty?
+    base= Unit.new(Unit.eliminate_terms(q,num,den))
+    @@base_unit_cache[self.units]=base
+    return base * @scalar
+  end
+  alias :base :to_base
+  
+  # Generate human readable output.
+  # If the name of a unit is passed, the unit will first be converted to the target unit before output.
+  # some named conversions are available
+  #
+  #  :ft - outputs in feet and inches (e.g., 6'4")
+  #  :lbs - outputs in pounds and ounces (e.g, 8 lbs, 8 oz)
+  #  
+  # You can also pass a standard format string (i.e., '%0.2f')
+  # or a strftime format string.
+  #
+  # output is cached so subsequent calls for the same format will be fast
+  #
+  def to_s(target_units=nil)
+    out = @output[target_units]
+    if out
+      return out
+    else
+      case target_units
+      when :ft
+        inches = self.to("in").scalar.to_int
+        out = "#{(inches / 12).truncate}\'#{(inches % 12).round}\""
+      when :lbs
+        ounces = self.to("oz").scalar.to_int
+        out = "#{(ounces / 16).truncate} lbs, #{(ounces % 16).round} oz"
+      when String
+        out = case target_units
+        when /(%[\-+\.\w#]+)\s*(.+)*/       #format string like '%0.2f in'
+          begin
+            if $2 #unit specified, need to convert
+              self.to($2).to_s($1)
+            else 
+              "#{$1 % @scalar} #{$2 || self.units}".strip
+            end
+          rescue
+            (DateTime.new(0) + self).strftime(target_units)  
+          end
+        when /(\S+)/ #unit only 'mm' or '1/mm'
+          "#{self.to($1).to_s}"
+        else
+          raise "unhandled case"
+        end
+      else
+        out = case @scalar
+        when Rational
+          "#{@scalar} #{self.units}"
+        else
+          "#{'%g' % @scalar} #{self.units}"
+        end.strip
+      end
+      @output[target_units] = out
+      return out
+    end    
+  end
+  
+  # Normally pretty prints the unit, but if you really want to see the guts of it, pass ':dump'
+  def inspect(option=nil)
+    return super() if option == :dump
+    self.to_s
+  end
+  
+  # true if unit is a 'temperature', false if a 'degree' or anything else
+  def is_temperature?
+    self.is_degree? && (!(self.units =~ /temp[CFRK]/).nil?)
+  end
+  alias :temperature? :is_temperature?
+  
+  # true if a degree unit or equivalent.
+  def is_degree?
+    self.kind == :temperature
+  end
+  alias :degree? :is_degree?
+  
+  # returns the 'degree' unit associated with a temperature unit
+  # '100 tempC'.unit.temperature_scale #=> 'degC'
+  def temperature_scale
+    return nil unless self.is_temperature?
+    self.units =~ /temp([CFRK])/
+    "deg#{$1}"
+  end
+  
+  # returns true if no associated units
+  # false, even if the units are "unitless" like 'radians, each, etc'
+  def unitless?
+    (@numerator == UNITY_ARRAY && @denominator == UNITY_ARRAY)
+  end
+  
+  # Compare two Unit objects. Throws an exception if they are not of compatible types.
+  # Comparisons are done based on the value of the unit in base SI units.
+  def <=>(other)
+    case
+    when !self.base_scalar.respond_to?(:<=>)
+      raise NoMethodError, "undefined method `<=>' for #{self.base_scalar.inspect}"
+    when !self.is_temperature? && other.zero?
+      return self.base_scalar <=> 0
+    when other.instance_of?(Unit)
+      raise ArgumentError, "Incompatible Units (#{self.units} !~ #{other.units})" unless self =~ other
+      return self.base_scalar <=> other.base_scalar
+    else
+      x,y = coerce(other)
+      return x <=> y
+    end
+  end
+  
+  # Compare Units for equality
+  # this is necessary mostly for Complex units.  Complex units do not have a <=> operator
+  # so we define this one here so that we can properly check complex units for equality.
+  # Units of incompatible types are not equal, except when they are both zero and neither is a temperature
+  # Equality checks can be tricky since round off errors may make essentially equivalent units
+  # appear to be different.
+  def ==(other)
+    case
+    when other.respond_to?(:zero?) && other.zero?
+      return self.zero?
+    when other.instance_of?(Unit)
+      return false unless self =~ other
+      return self.base_scalar == other.base_scalar
+    else
+      x,y = coerce(other)
+      return x == y
+    end      
+  end
+  
+  # check to see if units are compatible, but not the scalar part
+  # this check is done by comparing signatures for performance reasons
+  # if passed a string, it will create a unit object with the string and then do the comparison
+  # this permits a syntax like:  
+  #  unit =~ "mm"
+  # if you want to do a regexp on the unit string do this ...
+  #  unit.units =~ /regexp/
+  def =~(other)
+    case other
+    when Unit
+      self.signature == other.signature
+    else
+      x,y = coerce(other)
+      x =~ y
+    end 
+  end
+  
+  alias :compatible? :=~
+  alias :compatible_with? :=~
+  
+  # Compare two units.  Returns true if quantities and units match
+  #
+  # Unit("100 cm") === Unit("100 cm")   # => true
+  # Unit("100 cm") === Unit("1 m")      # => false
+  def ===(other)
+    case other
+    when Unit
+      (self.scalar == other.scalar) && (self.units == other.units)
+    else
+      x,y = coerce(other)
+      x === y
+    end
+  end
+  
+  alias :same? :===
+  alias :same_as? :===
+  
+  # Add two units together.  Result is same units as receiver and scalar and base_scalar are updated appropriately
+  # throws an exception if the units are not compatible.
+  # It is possible to add Time objects to units of time
+  def +(other)
+    case other
+    when Unit
+      case
+      when self.zero?
+        other.dup
+      when self =~ other
+        raise ArgumentError, "Cannot add two temperatures" if ([self, other].all? {|x| x.is_temperature?})
+        if [self, other].any? {|x| x.is_temperature?}
+          if self.is_temperature?
+            Unit.new(:scalar => (self.scalar + other.to(self.temperature_scale).scalar), :numerator => @numerator, :denominator=>@denominator, :signature => @signature)
+          else
+            Unit.new(:scalar => (other.scalar + self.to(other.temperature_scale).scalar), :numerator => other.numerator, :denominator=>other.denominator, :signature => other.signature)
+          end
+        else
+          @q ||= ((@@cached_units[self.units].scalar / @@cached_units[self.units].base_scalar) rescue (self.units.unit.to_base.scalar))
+          Unit.new(:scalar=>(self.base_scalar + other.base_scalar)*@q, :numerator=>@numerator, :denominator=>@denominator, :signature => @signature)
+        end
+      else
+        raise ArgumentError,  "Incompatible Units ('#{self}' not compatible with '#{other}')"
+      end
+    when Date, Time
+      raise ArgumentError, "Date and Time objects represent fixed points in time and cannot be added to a Unit"
+    else
+      x,y = coerce(other)
+      y + x
+    end
+  end
+  
+  # Subtract two units. Result is same units as receiver and scalar and base_scalar are updated appropriately
+  # throws an exception if the units are not compatible.
+  def -(other)
+    case other
+      when Unit
+        case
+        when self.zero?
+          -other.dup
+        when self =~ other
+          case
+            when [self, other].all? {|x| x.is_temperature?}
+              Unit.new(:scalar => (self.base_scalar - other.base_scalar), :numerator  => KELVIN, :denominator => UNITY_ARRAY, :signature => @signature).to(self.temperature_scale) 
+            when self.is_temperature?
+              Unit.new(:scalar => (self.base_scalar - other.base_scalar), :numerator  => ['<temp-K>'], :denominator => UNITY_ARRAY, :signature => @signature).to(self) 
+            when other.is_temperature?
+              raise ArgumentError, "Cannot subtract a temperature from a differential degree unit"
+            else
+              @q ||= ((@@cached_units[self.units].scalar / @@cached_units[self.units].base_scalar) rescue (self.units.unit.scalar/self.units.unit.to_base.scalar))
+              Unit.new(:scalar=>(self.base_scalar - other.base_scalar)*@q, :numerator=>@numerator, :denominator=>@denominator, :signature=>@signature)            
+          end
+        else
+           raise ArgumentError,  "Incompatible Units ('#{self}' not compatible with '#{other}')"
+        end
+    when Time
+      raise ArgumentError, "Date and Time objects represent fixed points in time and cannot be subtracted from to a Unit, which can only represent time spans"
+    else
+        x,y = coerce(other)
+        y-x
+    end
+  end
+  
+  # Multiply two units.
+  def *(other)
+    case other
+    when Unit
+      raise ArgumentError, "Cannot multiply by temperatures" if [other,self].any? {|x| x.is_temperature?}
+      opts = Unit.eliminate_terms(@scalar*other.scalar, @numerator + other.numerator ,@denominator + other.denominator)
+      opts.merge!(:signature => @signature + other.signature)
+      Unit.new(opts)      
+    when Numeric
+      Unit.new(:scalar=>@scalar*other, :numerator=>@numerator, :denominator=>@denominator, :signature => @signature)
+    else
+      x,y = coerce(other)
+      x * y
+    end
+  end
+  
+  # Divide two units.
+  # Throws an exception if divisor is 0
+  def /(other)
+    case other
+    when Unit 
+      raise ZeroDivisionError if other.zero?
+      raise ArgumentError, "Cannot divide with temperatures" if [other,self].any? {|x| x.is_temperature?}
+      opts = Unit.eliminate_terms(@scalar/other.scalar, @numerator + other.denominator ,@denominator + other.numerator)
+      opts.merge!(:signature=> @signature - other.signature)
+      Unit.new(opts)      
+    when Numeric
+      raise ZeroDivisionError if other.zero?
+      Unit.new(:scalar=>@scalar/other, :numerator=>@numerator, :denominator=>@denominator, :signature => @signature)      
+    else
+      x,y = coerce(other)
+      y / x
+    end
+  end
+
+  # divide two units and return quotient and remainder
+  # when both units are in the same units we just use divmod on the raw scalars
+  # otherwise we use the scalar of the base unit which will be a float
+  def divmod(other)
+    raise ArgumentError, "Incompatible Units" unless self =~ other
+    if self.units == other.units
+      return self.scalar.divmod(other.scalar)
+    else
+      return self.to_base.scalar.divmod(other.to_base.scalar)
+    end
+  end
+
+  # perform a modulo on a unit, will raise an exception if the units are not compatible
+  def %(other)
+    self.divmod(other).last
+  end
+    
+  # Exponentiate.  Only takes integer powers. 
+  # Note that anything raised to the power of 0 results in a Unit object with a scalar of 1, and no units.
+  # Throws an exception if exponent is not an integer.
+  # Ideally this routine should accept a float for the exponent
+  # It should then convert the float to a rational and raise the unit by the numerator and root it by the denominator
+  # but, sadly, floats can't be converted to rationals.
+  #
+  # For now, if a rational is passed in, it will be used, otherwise we are stuck with integers and certain floats < 1
+  def **(other)
+    raise ArgumentError, "Cannot raise a temperature to a power" if self.is_temperature?
+    if other.kind_of?(Numeric)
+      return self.inverse if other == -1
+      return self if other == 1
+      return 1 if other.zero?
+    end
+    case other
+    when Rational
+      self.power(other.numerator).root(other.denominator)
+    when Integer
+      self.power(other)
+    when Float
+      return self**(other.to_i) if other == other.to_i
+      valid = (1..9).map {|x| 1/x}
+      raise ArgumentError, "Not a n-th root (1..9), use 1/n" unless valid.include? other.abs
+      self.root((1/other).to_int)
+    when Complex
+      raise ArgumentError, "exponentiation of complex numbers is not yet supported."
+    else
+      raise ArgumentError, "Invalid Exponent"
+    end
+  end
+
+  # returns the unit raised to the n-th power.  Integers only
+  def power(n)
+    raise ArgumentError, "Cannot raise a temperature to a power" if self.is_temperature?
+    raise ArgumentError, "Exponent must an Integer" unless n.kind_of?(Integer)
+    return self.inverse if n == -1
+    return 1 if n.zero?
+    return self if n == 1
+    if n > 0 then 
+      (1..(n-1).to_i).inject(self) {|product, x| product * self}
+    else
+      (1..-(n-1).to_i).inject(self) {|product, x| product / self}
+    end
+  end
+  
+  # Calculates the n-th root of a unit, where n = (1..9)
+  # if n < 0, returns 1/unit^(1/n)
+  def root(n)
+    raise ArgumentError, "Cannot take the root of a temperature" if self.is_temperature?
+    raise ArgumentError, "Exponent must an Integer" unless n.kind_of?(Integer)
+    raise ArgumentError, "0th root undefined" if n.zero?
+    return self if n == 1
+    return self.root(n.abs).inverse if n < 0
+    
+    vec = self.unit_signature_vector
+    vec=vec.map {|x| x % n}      
+    raise ArgumentError, "Illegal root" unless vec.max == 0
+    num = @numerator.dup
+    den = @denominator.dup
+      
+    for item in @numerator.uniq do
+      x = num.find_all {|i| i==item}.size
+      r = ((x/n)*(n-1)).to_int
+      r.times {|y| num.delete_at(num.index(item))}
+    end
+    
+    for item in @denominator.uniq do 
+      x = den.find_all {|i| i==item}.size
+      r = ((x/n)*(n-1)).to_int
+      r.times {|y| den.delete_at(den.index(item))}
+    end
+    q = @scalar < 0 ? (-1)**Rational(1,n) * (@scalar.abs)**Rational(1,n) : @scalar**Rational(1,n)
+    Unit.new(:scalar=>q,:numerator=>num,:denominator=>den)    
+  end
+  
+  # returns inverse of Unit (1/unit)
+  def inverse
+    Unit("1") / self
+  end
+  
+  # convert to a specified unit string or to the same units as another Unit
+  # 
+  #  unit >> "kg"  will covert to kilograms
+  #  unit1 >> unit2 converts to same units as unit2 object
+  # 
+  # To convert a Unit object to match another Unit object, use:
+  #  unit1 >>= unit2
+  # Throws an exception if the requested target units are incompatible with current Unit.
+  #
+  # Special handling for temperature conversions is supported.  If the Unit object is converted
+  # from one temperature unit to another, the proper temperature offsets will be used.
+  # Supports Kelvin, Celsius, fahrenheit, and Rankine scales.
+  #
+  # Note that if temperature is part of a compound unit, the temperature will be treated as a differential
+  # and the units will be scaled appropriately.
+  def to(other)
+    return self if other.nil? 
+    return self if TrueClass === other
+    return self if FalseClass === other
+    if (Unit === other && other.is_temperature?) || (String === other && other =~ /temp[CFRK]/) 
+      raise ArgumentError, "Receiver is not a temperature unit" unless self.degree?
+      start_unit = self.units
+      target_unit = other.units rescue other
+      unless @base_scalar
+        @base_scalar = case start_unit
+        when 'tempC'
+          @scalar + 273.15
+        when 'tempK'
+          @scalar
+        when 'tempF'
+          (@scalar+459.67)*Rational(5,9)
+        when 'tempR'
+          @scalar*Rational(5,9)
+        end
+      end
+      q=  case target_unit
+      when 'tempC'
+        @base_scalar - 273.15
+      when 'tempK'
+        @base_scalar 
+      when 'tempF'
+        @base_scalar * Rational(9,5) - 459.67
+      when 'tempR'
+        @base_scalar * Rational(9,5)
+      end
+      Unit.new("#{q} #{target_unit}")
+    else
+      case other
+      when Unit
+        return self if other.units == self.units
+        target = other
+      when String
+        target = Unit.new(other)
+      else
+        raise ArgumentError, "Unknown target units"
+      end
+      raise ArgumentError,  "Incompatible Units" unless self =~ target
+      _numerator1 = @numerator.map {|x| @@PREFIX_VALUES[x] ? @@PREFIX_VALUES[x] : x}.map {|i| i.kind_of?(Numeric) ? i : @@UNIT_VALUES[i][:scalar] }.compact
+      _denominator1 = @denominator.map {|x| @@PREFIX_VALUES[x] ? @@PREFIX_VALUES[x] : x}.map {|i| i.kind_of?(Numeric) ? i : @@UNIT_VALUES[i][:scalar] }.compact
+      _numerator2 = target.numerator.map {|x| @@PREFIX_VALUES[x] ? @@PREFIX_VALUES[x] : x}.map {|x| x.kind_of?(Numeric) ? x : @@UNIT_VALUES[x][:scalar] }.compact
+      _denominator2 = target.denominator.map {|x| @@PREFIX_VALUES[x] ? @@PREFIX_VALUES[x] : x}.map {|x| x.kind_of?(Numeric) ? x : @@UNIT_VALUES[x][:scalar] }.compact
+      
+      # eliminate common terms
+      
+      (_numerator1 & _denominator2).each do |common|
+        _numerator1.delete(common)
+        _denominator2.delete(common)
+      end
+      
+      (_numerator2 & _denominator1).each do |common|
+        _numerator1.delete(common)
+        _denominator2.delete(common)
+      end
+            
+      q = @scalar * ( (_numerator1 + _denominator2).inject(1) {|product,n| product*n} ) / 
+          ( (_numerator2 + _denominator1).inject(1) {|product,n| product*n} ) 
+      
+      
+      Unit.new(:scalar=>q, :numerator=>target.numerator, :denominator=>target.denominator, :signature => target.signature)
+    end
+  end  
+  alias :>> :to
+  alias :convert_to :to
+    
+  # converts the unit back to a float if it is unitless.  Otherwise raises an exception
+  def to_f
+    return @scalar.to_f if self.unitless?
+    raise RuntimeError, "Cannot convert '#{self.to_s}' to Float unless unitless.  Use Unit#scalar"
+  end
+  
+  # converts the unit back to a complex if it is unitless.  Otherwise raises an exception
+  def to_c
+    return Complex(@scalar) if self.unitless?
+    raise RuntimeError, "Cannot convert '#{self.to_s}' to Complex unless unitless.  Use Unit#scalar"
+  end
+
+  # if unitless, returns an int, otherwise raises an error
+  def to_i
+    return @scalar.to_int if self.unitless?
+    raise RuntimeError, "Cannot convert '#{self.to_s}' to Integer unless unitless.  Use Unit#scalar"
+  end
+  alias :to_int :to_i
+  
+  # if unitless, returns a Rational, otherwise raises an error
+  def to_r
+    return @scalar.to_r if self.unitless?
+    raise RuntimeError, "Cannot convert '#{self.to_s}' to Rational unless unitless.  Use Unit#scalar"
+  end
+  
+  # returns the 'unit' part of the Unit object without the scalar
+  def units
+    return "" if @numerator == UNITY_ARRAY && @denominator == UNITY_ARRAY
+    return @unit_name unless @unit_name.nil?
+    output_n = []
+    output_d =[] 
+    num = @numerator.clone.compact
+    den = @denominator.clone.compact
+    if @numerator == UNITY_ARRAY
+      output_n << "1"
+    else
+      num.each_with_index do |token,index|
+        if token && @@PREFIX_VALUES[token] then
+          output_n << "#{@@OUTPUT_MAP[token]}#{@@OUTPUT_MAP[num[index+1]]}"
+          num[index+1]=nil
+        else
+          output_n << "#{@@OUTPUT_MAP[token]}" if token
+        end
+      end
+    end
+    if @denominator == UNITY_ARRAY
+      output_d = ['1']
+    else
+      den.each_with_index do |token,index|
+        if token && @@PREFIX_VALUES[token] then
+          output_d << "#{@@OUTPUT_MAP[token]}#{@@OUTPUT_MAP[den[index+1]]}"
+          den[index+1]=nil
+        else
+          output_d << "#{@@OUTPUT_MAP[token]}" if token
+        end
+      end
+    end
+    on = output_n.reject {|x| x.empty?}.map {|x| [x, output_n.find_all {|z| z==x}.size]}.uniq.map {|x| ("#{x[0]}".strip+ (x[1] > 1 ? "^#{x[1]}" : ''))}
+    od = output_d.reject {|x| x.empty?}.map {|x| [x, output_d.find_all {|z| z==x}.size]}.uniq.map {|x| ("#{x[0]}".strip+ (x[1] > 1 ? "^#{x[1]}" : ''))}
+    out = "#{on.join('*')}#{od == ['1'] ? '': '/'+od.join('*')}".strip    
+    @unit_name = out unless self.kind == :temperature
+    return out
+  end
+  
+  # negates the scalar of the Unit
+  def -@
+    return -@scalar if self.unitless?
+    self.dup * -1
+  end
+  
+  def abs
+    return @scalar.abs if self.unitless?
+    Unit.new(@scalar.abs, @numerator, @denominator)
+  end
+  
+  def ceil
+    return @scalar.ceil if self.unitless?
+    Unit.new(@scalar.ceil, @numerator, @denominator)    
+  end
+  
+  def floor
+    return @scalar.floor if self.unitless?
+    Unit.new(@scalar.floor, @numerator, @denominator)    
+  end
+
+  def round
+    return @scalar.round if self.unitless?
+    Unit.new(@scalar.round, @numerator, @denominator)    
+  end
+
+  def truncate
+    return @scalar.truncate if self.unitless?
+    Unit.new(@scalar.truncate, @numerator, @denominator)    
+  end
+
+  # returns next unit in a range.  '1 mm'.unit.succ #=> '2 mm'.unit
+  # only works when the scalar is an integer    
+  def succ
+    raise ArgumentError, "Non Integer Scalar" unless @scalar == @scalar.to_i
+    Unit.new(@scalar.to_i.succ, @numerator, @denominator)
+  end
+  alias :next :succ
+  
+  # returns next unit in a range.  '1 mm'.unit.succ #=> '2 mm'.unit
+  # only works when the scalar is an integer    
+  def pred
+    raise ArgumentError, "Non Integer Scalar" unless @scalar == @scalar.to_i
+    Unit.new(@scalar.to_i.pred, @numerator, @denominator)
+  end
+  
+  
+  # Tries to make a Time object from current unit.  Assumes the current unit hold the duration in seconds from the epoch.
+  def to_time
+    Time.at(self)
+  end
+  alias :time :to_time
+
+
+  # convert a duration to a DateTime.  This will work so long as the duration is the duration from the zero date
+  # defined by DateTime
+  def to_datetime
+    DateTime.new!(self.to('d').scalar)
+  end
+  
+  def to_date
+    Date.new0(self.to('d').scalar)
+  end
+  
+   
+  # true if scalar is zero
+  def zero?
+    return self.base_scalar.zero?
+  end
+  
+  # '5 min'.unit.ago 
+  def ago
+    self.before
+  end
+  
+  # '5 min'.before(time)
+  def before(time_point = ::Time.now)
+    raise ArgumentError, "Must specify a Time" unless time_point
+    if String === time_point
+      time_point.time - self rescue time_point.datetime - self
+    else
+      time_point - self rescue time_point.to_datetime - self
+    end
+  end
+  alias :before_now :before
+  
+  # 'min'.since(time)
+  def since(time_point = ::Time.now)
+    case time_point
+    when Time
+      (Time.now - time_point).unit('s').to(self)
+    when DateTime, Date
+      (DateTime.now - time_point).unit('d').to(self)
+    when String    
+      (DateTime.now - time_point.to_datetime(:context=>:past)).unit('d').to(self)
+    else
+      raise ArgumentError, "Must specify a Time, DateTime, or String" 
+    end
+  end
+  
+  # 'min'.until(time)
+  def until(time_point = ::Time.now)
+    case time_point
+    when Time
+      (time_point - Time.now).unit('s').to(self)
+    when DateTime, Date
+      (time_point - DateTime.now).unit('d').to(self)
+    when String
+      (time_point.to_datetime(:context=>:future) - DateTime.now).unit('d').to(self)
+    else
+      raise ArgumentError, "Must specify a Time, DateTime, or String" 
+    end
+  end
+  
+  # '5 min'.from(time)
+  def from(time_point = ::Time.now)
+    raise ArgumentError, "Must specify a Time" unless time_point
+    if String === time_point
+      time_point.time + self rescue time_point.datetime + self
+    else
+      time_point + self rescue time_point.to_datetime + self
+    end
+  end
+  alias :after :from
+  alias :from_now :from
+  
+ 
+
+  # automatically coerce objects to units when possible
+  # if an object defines a 'to_unit' method, it will be coerced using that method
+  def coerce(other)
+    if other.respond_to? :to_unit
+      return [other.to_unit, self]
+    end
+    case other
+    when Unit
+      [other, self]
+    else 
+      [Unit.new(other), self]
+    end
+  end
+      
+  # Protected and Private Functions that should only be called from this class
+  protected
+  
+  
+  def update_base_scalar
+    return @base_scalar unless @base_scalar.nil?
+    if self.is_base?
+      @base_scalar = @scalar
+      @signature = unit_signature
+    else
+      base = self.to_base
+      @base_scalar = base.scalar
+      @signature = base.signature
+    end
+  end
+  
+  # calculates the unit signature vector used by unit_signature
+  def unit_signature_vector
+    return self.to_base.unit_signature_vector unless self.is_base?
+    vector = Array.new(SIGNATURE_VECTOR.size,0)
+    for element in @numerator
+      if r=@@ALL_UNIT_DEFINITIONS[element]
+        n = SIGNATURE_VECTOR.index(r[2])
+        vector[n] = vector[n] + 1 if n
+      end
+    end
+    for element in @denominator
+      if r=@@ALL_UNIT_DEFINITIONS[element]
+        n = SIGNATURE_VECTOR.index(r[2])
+        vector[n] = vector[n] - 1 if n
+      end
+    end
+    raise ArgumentError, "Power out of range (-20 < net power of a unit < 20)" if vector.any? {|x| x.abs >=20}
+    vector
+  end
+    
+  private
+  
+  def initialize_copy(other)
+    @numerator = other.numerator.dup
+    @denominator = other.denominator.dup    
+  end
+  
+  # calculates the unit signature id for use in comparing compatible units and simplification
+  # the signature is based on a simple classification of units and is based on the following publication
+  #  
+  #  Novak, G.S., Jr. "Conversion of units of measurement", IEEE Transactions on Software Engineering,
+  #  21(8), Aug 1995, pp.651-661
+  #  doi://10.1109/32.403789
+  #  http://ieeexplore.ieee.org/Xplore/login.jsp?url=/iel1/32/9079/00403789.pdf?isnumber=9079&prod=JNL&arnumber=403789&arSt=651&ared=661&arAuthor=Novak%2C+G.S.%2C+Jr.
+  #
+  def unit_signature
+    return @signature unless @signature.nil?
+    vector = unit_signature_vector
+    vector.each_with_index {|item,index| vector[index] = item * 20**index}
+    @signature=vector.inject(0) {|sum,n| sum+n}
+  end
+  
+  def self.eliminate_terms(q, n, d)
+    num = n.dup
+    den = d.dup
+    
+    num.delete_if {|v| v == UNITY}
+    den.delete_if {|v| v == UNITY}
+    combined = Hash.new(0)
+ 
+    i = 0
+    loop do 
+      break if i > num.size
+      if @@PREFIX_VALUES.has_key? num[i]
+        k = [num[i],num[i+1]]
+        i += 2
+      else
+        k = num[i]
+        i += 1
+      end
+      combined[k] += 1 unless k.nil? || k == UNITY
+    end
+    
+    j = 0
+    loop do
+      break if j > den.size
+        if @@PREFIX_VALUES.has_key? den[j]
+          k = [den[j],den[j+1]]
+          j += 2
+        else
+          k = den[j]
+          j += 1
+        end
+      combined[k] -= 1 unless k.nil? || k == UNITY
+    end
+ 
+    num = []
+    den = []
+    for key, value in combined do 
+      case 
+      when value > 0
+        value.times {num << key}
+      when value < 0
+        value.abs.times {den << key}
+      end
+    end
+    num = UNITY_ARRAY if num.empty?
+    den = UNITY_ARRAY if den.empty?
+    {:scalar=>q, :numerator=>num.flatten.compact, :denominator=>den.flatten.compact}
+  end
+      
+  
+  # parse a string into a unit object.
+  # Typical formats like : 
+  #  "5.6 kg*m/s^2"
+  #  "5.6 kg*m*s^-2"
+  #  "5.6 kilogram*meter*second^-2"
+  #  "2.2 kPa"
+  #  "37 degC"
+  #  "1"  -- creates a unitless constant with value 1
+  #  "GPa"  -- creates a unit with scalar 1 with units 'GPa'
+  #  6'4"  -- recognized as 6 feet + 4 inches
+  #  8 lbs 8 oz -- recognized as 8 lbs + 8 ounces 
+  def parse(passed_unit_string="0")
+    unit_string = passed_unit_string.dup
+    if unit_string =~ /\$\s*(#{NUMBER_REGEX})/
+      unit_string = "#{$1} USD"
+    end
+    unit_string.gsub!(/%/,'percent')
+    unit_string.gsub!(/'/,'feet')
+    unit_string.gsub!(/"/,'inch')
+    unit_string.gsub!(/#/,'pound')
+    
+    #:nocov:
+    if defined?(Uncertain) && unit_string =~ /(\+\/-|&plusmn;)/
+      value, uncertainty, unit_s = unit_string.scan(UNCERTAIN_REGEX)[0]
+      result = unit_s.unit * Uncertain.new(value.to_f,uncertainty.to_f)
+      copy(result)
+      return  
+    end
+    #:nocov:
+    
+    if defined?(Complex) && unit_string =~ COMPLEX_NUMBER
+      real, imaginary, unit_s = unit_string.scan(COMPLEX_REGEX)[0]
+      result = Unit(unit_s || '1') * Complex(real.to_f,imaginary.to_f)
+      copy(result)
+      return 
+    end
+    
+    if defined?(Rational) && unit_string =~ RATIONAL_NUMBER
+        numerator, denominator, unit_s = unit_string.scan(RATIONAL_REGEX)[0]
+        result = Unit(unit_s || '1') * Rational(numerator.to_i,denominator.to_i)
+        copy(result)
+        return 
+    end
+    
+    unit_string =~ NUMBER_REGEX
+    unit = @@cached_units[$2] 
+    mult = ($1.empty? ? 1.0 : $1.to_f) rescue 1.0
+    mult = mult.to_int if (mult.to_int == mult)
+    if unit
+      copy(unit)
+      @scalar *= mult
+      @base_scalar *= mult
+      return self
+    end
+    unit_string.gsub!(/<(#{@@UNIT_REGEX})><(#{@@UNIT_REGEX})>/, '\1*\2')
+    unit_string.gsub!(/[<>]/,"")
+    
+    if unit_string =~ /:/
+      hours, minutes, seconds, microseconds = unit_string.scan(TIME_REGEX)[0]
+      raise ArgumentError, "Invalid Duration" if [hours, minutes, seconds, microseconds].all? {|x| x.nil?}
+      result = "#{hours || 0} h".unit + 
+               "#{minutes || 0} minutes".unit + 
+               "#{seconds || 0} seconds".unit +
+               "#{microseconds || 0} usec".unit
+      copy(result)
+      return
+    end
+    
+    
+    # Special processing for unusual unit strings
+    # feet -- 6'5"
+    feet, inches = unit_string.scan(FEET_INCH_REGEX)[0]
+    if (feet && inches)
+      result = Unit.new("#{feet} ft") + Unit.new("#{inches} inches")
+      copy(result)
+      return 
+    end
+
+    # weight -- 8 lbs 12 oz    
+    pounds, oz = unit_string.scan(LBS_OZ_REGEX)[0]
+    if (pounds && oz)
+      result = Unit.new("#{pounds} lbs") + Unit.new("#{oz} oz")
+      copy(result)
+      return 
+    end
+    
+    raise( ArgumentError, "'#{passed_unit_string}' Unit not recognized") if unit_string.count('/') > 1
+    raise( ArgumentError, "'#{passed_unit_string}' Unit not recognized") if unit_string.scan(/\s[02-9]/).size > 0
+    @scalar, top, bottom = unit_string.scan(UNIT_STRING_REGEX)[0]  #parse the string into parts
+    top.scan(TOP_REGEX).each do |item|
+      n = item[1].to_i
+      x = "#{item[0]} "
+      case 
+        when n>=0
+          top.gsub!(/#{item[0]}(\^|\*\*)#{n}/) {|s| x * n}
+        when n<0
+          bottom = "#{bottom} #{x * -n}"; top.gsub!(/#{item[0]}(\^|\*\*)#{n}/,"")
+      end
+    end 
+    bottom.gsub!(BOTTOM_REGEX) {|s| "#{$1} " * $2.to_i} if bottom
+    @scalar = @scalar.to_f unless @scalar.nil? || @scalar.empty?
+    @scalar = 1 unless @scalar.kind_of? Numeric 
+    @scalar = @scalar.to_int if (@scalar.to_int == @scalar)
+        
+    @numerator ||= UNITY_ARRAY
+    @denominator ||= UNITY_ARRAY
+    @numerator = top.scan(@@UNIT_MATCH_REGEX).delete_if {|x| x.empty?}.compact if top
+    @denominator = bottom.scan(@@UNIT_MATCH_REGEX).delete_if {|x| x.empty?}.compact if bottom
+    
+    
+    us = "#{(top || '' + bottom || '')}".to_s.gsub(@@UNIT_MATCH_REGEX,'').gsub(/[\d\*, "'_^\/\$]/,'')
+    raise( ArgumentError, "'#{passed_unit_string}' Unit not recognized") unless us.empty?
+
+    @numerator = @numerator.map do |item|
+       @@PREFIX_MAP[item[0]] ? [@@PREFIX_MAP[item[0]], @@UNIT_MAP[item[1]]] : [@@UNIT_MAP[item[1]]]
+    end.flatten.compact.delete_if {|x| x.empty?}
+
+    @denominator = @denominator.map do |item|
+       @@PREFIX_MAP[item[0]] ? [@@PREFIX_MAP[item[0]], @@UNIT_MAP[item[1]]] : [@@UNIT_MAP[item[1]]]
+    end.flatten.compact.delete_if {|x| x.empty?}
+
+    @numerator = UNITY_ARRAY if @numerator.empty? 
+    @denominator = UNITY_ARRAY if @denominator.empty?
+    self
+  end 
+  
+  private
+
+  # parse a string consisting of a number and a unit string
+  def self.parse_into_numbers_and_units(string)
+    # scientific notation.... 123.234E22, -123.456e-10
+    sci = %r{[+-]?\d*[.]?\d+(?:[Ee][+-]?)?\d*}
+    # rational numbers.... -1/3, 1/5, 20/100
+    rational = %r{[+-]?\d+\/\d+}
+    # complex numbers... -1.2+3i, +1.2-3.3i
+    complex = %r{#{sci}{2,2}i}
+    anynumber = %r{(?:(#{complex}|#{rational}|#{sci})\b)?\s?([\D].*)?}
+    num, unit = string.scan(anynumber).first
+    [case num
+      when NilClass
+        1
+      when complex
+        if num.respond_to?(:to_c)
+          num.to_c
+        else
+          Complex(*num.scan(/(#{sci})(#{sci})i/).flatten.map {|n| n.to_i})
+        end
+      when rational
+        Rational(*num.split("/").map {|x| x.to_i})
+      else
+        num.to_f
+    end, unit.to_s.strip]
+  end
+end
+
+Unit.setup