raffle_v1 0.0.5 → 1.0.4

data/lib/generators/raffle_v1/install/templates/config/initializers/date_format.rb

@@ -0,0 +1,27 @@
+# Date
+# ----------------------------
+#Date::DATE_FORMATS[:default] = "%Y-%m-%d"  # 2013-11-03
+Date::DATE_FORMATS[:default] = "%B %e, %Y"  # November 3, 2013
+#Date::DATE_FORMATS[:default] = "%e %b %Y"  # 3 Nov 2013
+#Date::DATE_FORMATS[:default] = "%Y%m%d"    # 20131103
+#Date::DATE_FORMATS[:default] = "%e %b"     # 3 Nov
+#Date::DATE_FORMATS[:default] = ""          # custom
+
+# DateTime
+# ----------------------------
+#DateTime::DATE_FORMATS[:default] = "%Y-%m-%d"  # 2013-11-03 14:22:18
+DateTime::DATE_FORMATS[:default] = "%B %e, %Y"  # November 3, 2013 14:22
+#DateTime::DATE_FORMATS[:default] = "%e %b %Y"  # Sun, 3 Nov 2013 14:22:18 -0700
+#DateTime::DATE_FORMATS[:default] = "%Y%m%d"    # 20131103142218
+#DateTime::DATE_FORMATS[:default] = "%e %b"     # 3 Nov 14:22
+#DateTime::DATE_FORMATS[:default] = ""          # custom
+
+# Time
+# ----------------------------
+#Time::DATE_FORMATS[:default] = "%Y-%m-%d %H:%M:%S"         # 2013-11-03 14:22:18
+#Time::DATE_FORMATS[:default] = "%B %d, %Y %H:%M"           # November 3, 2013 14:22
+#Time::DATE_FORMATS[:default] = "%a, %d %b %Y %H:%M:%S %z"  # Sun, 3 Nov 2013 14:22:18 -0700
+#Time::DATE_FORMATS[:default] = "%d %b %H:%M"               # 3 Nov 14:22
+#Time::DATE_FORMATS[:default] = "%Y%m%d%H%M%S"              # 20131103142218
+Time::DATE_FORMATS[:default] = "%H:%M"                      # 14:22
+#Time::DATE_FORMATS[:default] = ""                          # custom

data/lib/generators/raffle_v1/install/templates/config/initializers/devise.rb

@@ -0,0 +1,269 @@
+require 'devise'
+
+def secure_token
+  token_file = Rails.root.join('.secret')
+  if File.exist?(token_file)
+    # Use the existing token.
+    File.read(token_file).chomp
+  else
+    # Generate a new token and store it in token_file.
+    token = SecureRandom.hex(64)
+    File.write(token_file, token)
+    token
+  end
+end
+
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  config.secret_key = secure_token
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = ENV["SENDER_EMAIL"]
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  config.authentication_keys = [ :username ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :username ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :username ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing :skip => :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = '4e83d8cfef78f96087479e52152ed93d77780507d4399b6e58eb93c5106adb6ca68a82743ad67fc23feae9de4d1f69c18e3b87ad6143f8b1927a470e030358b9'
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming his account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming his account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming his account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed new email is stored in
+  # unconfirmed email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  config.confirmation_keys = [ :username ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  config.remember_for = 6.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  config.extend_remember_period = true
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 8..128.
+  config.password_length = 4..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = false
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+end

data/lib/generators/raffle_v1/install/templates/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/lib/generators/raffle_v1/install/templates/config/initializers/friendly_id.rb

@@ -0,0 +1,89 @@
+require 'friendly_id'
+# FriendlyId Global Configuration
+#
+# Use this to set up shared configuration options for your entire application.
+# Any of the configuration options shown here can also be applied to single
+# models by passing arguments to the `friendly_id` class method or defining
+# methods in your model.
+#
+# To learn more, check out the guide:
+#
+# http://norman.github.io/friendly_id/file.Guide.html
+
+FriendlyId.defaults do |config|
+  # ## Reserved Words
+  #
+  # Some words could conflict with Rails's routes when used as slugs, or are
+  # undesirable to allow as slugs. Edit this list as needed for your app.
+  config.use :reserved
+
+  config.reserved_words = %w(new edit index session login logout users admin
+    stylesheets assets javascripts images)
+
+  #  ## Friendly Finders
+  #
+  # Uncomment this to use friendly finders in all models. By default, if
+  # you wish to find a record by its friendly id, you must do:
+  #
+  #    MyModel.friendly.find('foo')
+  #
+  # If you uncomment this, you can do:
+  #
+  #    MyModel.find('foo')
+  #
+  # This is significantly more convenient but may not be appropriate for
+  # all applications, so you must explicity opt-in to this behavior. You can
+  # always also configure it on a per-model basis if you prefer.
+  #
+  # Something else to consider is that using the :finders addon boosts
+  # performance because it will avoid Rails-internal code that makes runtime
+  # calls to `Module.extend`.
+  #
+  # config.use :finders
+  #
+  # ## Slugs
+  #
+  # Most applications will use the :slugged module everywhere. If you wish
+  # to do so, uncomment the following line.
+  #
+  # config.use :slugged
+  #
+  # By default, FriendlyId's :slugged addon expects the slug column to be named
+  # 'slug', but you can change it if you wish.
+  #
+  # config.slug_column = 'slug'
+  #
+  # When FriendlyId can not generate a unique ID from your base method, it appends
+  # a UUID, separated by a single dash. You can configure the character used as the
+  # separator. If you're upgrading from FriendlyId 4, you may wish to replace this
+  # with two dashes.
+  #
+  # config.sequence_separator = '-'
+  #
+  #  ## Tips and Tricks
+  #
+  #  ### Controlling when slugs are generated
+  #
+  # As of FriendlyId 5.0, new slugs are generated only when the slug field is
+  # nil, but you if you're using a column as your base method can change this
+  # behavior by overriding the `should_generate_new_friendly_id` method that
+  # FriendlyId adds to your model. The change below makes FriendlyId 5.0 behave
+  # more like 4.0.
+  #
+  # config.use Module.new {
+  #   def should_generate_new_friendly_id?
+  #     slug.blank? || <your_column_name_here>_changed?
+  #   end
+  # }
+  #
+  # FriendlyId uses Rails's `parameterize` method to generate slugs, but for
+  # languages that don't use the Roman alphabet, that's not usually suffient. Here
+  # we use the Babosa library to transliterate Russian Cyrillic slugs to ASCII. If
+  # you use this, don't forget to add "babosa" to your Gemfile.
+  #
+  # config.use Module.new {
+  #   def normalize_friendly_id(text)
+  #     text.to_slug.normalize! :transliterations => [:russian, :latin]
+  #   end
+  # }
+end

data/lib/generators/raffle_v1/install/templates/config/initializers/kaminari_config.rb

@@ -0,0 +1,11 @@
+require 'kaminari'
+Kaminari.configure do |config|
+  # config.default_per_page = 25
+  # config.max_per_page = nil
+  # config.window = 4
+  # config.outer_window = 0
+  # config.left = 0
+  # config.right = 0
+  # config.page_method_name = :page
+  # config.param_name = :page
+end

data/lib/generators/raffle_v1/install/templates/config/initializers/rafflev1.rb

@@ -0,0 +1,4 @@
+# RaffleV1.config do |config|
+# 	# Uncomment to stop tracking the winners in the application.
+# 	# config.track_winners = false
+# end

data/lib/generators/raffle_v1/install/templates/db/seeds.rb

@@ -0,0 +1,28 @@
+# This file should contain all the record creation needed to seed the database with its default values.
+# The data can then be loaded with the rake db:seed (or created alongside the db with db:setup).
+#
+# uncomment after Role migration has been create
+u = RaffleV1::User.new(
+    username: "admin",
+    email: "admin@example.com",
+    password: "1234",
+    password_confirmation: "1234",
+    admin: true
+)
+u.skip_confirmation!
+u.save!
+
+# Test user accounts
+(1..5).each do |i|
+  u = RaffleV1::User.new(
+      username: "user#{i}",
+      email: "user#{i}@example.com",
+      password: "1234",
+      password_confirmation: "1234"
+  )
+  u.skip_confirmation!
+  u.save!
+
+  puts "#{i} test users created..." if (i % 5 == 0)
+
+end

data/lib/raffle_v1/version.rb

@@ -1,3 +1,3 @@
 module RaffleV1
-  VERSION = "0.0.5"
-end
+	VERSION = "1.0.4"
+end

data/test/controllers/raffle_v1/locales_controller_test.rb

@@ -0,0 +1,51 @@
+require 'test_helper'
+
+module RaffleV1
+  class LocalesControllerTest < ActionController::TestCase
+    setup do
+      @locale = locales(:one)
+    end
+
+    test "should get index" do
+      get :index
+      assert_response :success
+      assert_not_nil assigns(:locales)
+    end
+
+    test "should get new" do
+      get :new
+      assert_response :success
+    end
+
+    test "should create locale" do
+      assert_difference('Locale.count') do
+        post :create, locale: { description: @locale.description, short_name: @locale.short_name }
+      end
+
+      assert_redirected_to locale_path(assigns(:locale))
+    end
+
+    test "should show locale" do
+      get :show, id: @locale
+      assert_response :success
+    end
+
+    test "should get edit" do
+      get :edit, id: @locale
+      assert_response :success
+    end
+
+    test "should update locale" do
+      patch :update, id: @locale, locale: { description: @locale.description, short_name: @locale.short_name }
+      assert_redirected_to locale_path(assigns(:locale))
+    end
+
+    test "should destroy locale" do
+      assert_difference('Locale.count', -1) do
+        delete :destroy, id: @locale
+      end
+
+      assert_redirected_to locales_path
+    end
+  end
+end