RubyGems - radiantcms-couchrest_model - Versions diffs - 0.1.3 → 0.1.4 - Mend

radiantcms-couchrest_model 0.1.3 → 0.1.4

Files changed (726) hide show

data/vendor/plugins/haml/TODO CHANGED Viewed

@@ -1,24 +1,25 @@
-y# -*- mode: org -*-
+# -*- mode: org -*-
 #+STARTUP: nofold
 * Documentation
   Redo tutorial?
+  Contribution information
+    Will be code reviewed
+    [Haml]/[Sass], punctuation
+    Don't forget docs
   Using helpers
     haml_concat and haml_tag in particular
-  Syntax highlighting?
+  [2.4] Syntax highlighting?
 * Code
-  Keep track of error offsets everywhere
-    Use this to show error location in messages
-    Just clean up SassScript syntax errors in general
-    Lexer errors in particular are icky
-    See in particular error changes made in c07b5c8
 ** Haml
-   Support finer-grained HTML-escaping in filters
-   Speed
-     Make tags with dynamic attributes pre-render as much as possible
-     Including the attribute name where doable
-   :ugly + :html improvements
+   Interpolation shouldn't make non-interpolated strings escaped under :escape_html
+     I think we can just wrap interpolated code with (),
+     since it's already interpolated.
+   Can also use () to wrap contents of _haml_temp so that commas throw errors when not in :ugly
+   [2.4] Allow "!!! HTML5" to set :format => :html5 ?
+     How do we deal with partials?
+   [2.4] :ugly + :html improvements
      Ignore closing tags where we can
        http://code.google.com/speed/articles/optimizing-html.html
        Requires Haml parsing refactor
@@ -26,19 +27,16 @@ y# -*- mode: org -*-
        http://www.w3.org/TR/REC-html40/intro/sgmltut.html#h-3.2.2
        http://www.w3.org/TR/html5/syntax.html#attributes
 ** Sass
-   Benchmark the effects of storing the raw template in sassc
-     If it's expensive, overload RootNode dumping/loading to dup and set @template to nil
-     Then fall back on reading from actual file
-   Make Rack middleware the default for Rails and Merb versions that support it
-   CSS superset
-   Classes are mixins
+   [2.4] CSS superset
+   [2.4] Classes are mixins
      Can refer to specific property values? Syntax?
-   Pull in Compass watcher stuff
-   Internationalization
+   [2.4] Pre-parse everything possible: never call Node#interpolate
+   [2.4] Do all parsing in to_tree
+   [2.4] Pull in Compass watcher stuff
+   [2.4] Internationalization
      Particularly word constituents in Regexps
-   Optimization
+   [2.4] Optimization
      http://csstidy.sourceforge.net/
-     http://developer.yahoo.com/yui/compressor/
      Also comma-folding identical rules where possible
      Multiple levels
        0: No optimization
@@ -47,7 +45,3 @@ y# -*- mode: org -*-
        2: Anything that keeps functionality identical to O2 (default)
        3: Assume order of rules doesn't matter
        Comma-fold even if there are intervening rules that might interfere
-   CSS3
-     Add (optional) support for http://www.w3.org/TR/css3-values/#calc
-       Cross-unit arithmetic should compile into this
-       Should we use "mod" in Sass for consistency?

data/vendor/plugins/haml/VERSION CHANGED Viewed

	@@ -1 +1 @@
1	- 3.0.23
1	+ 2.2.24

data/vendor/plugins/haml/VERSION_NAME CHANGED Viewed

	@@ -1 +1 @@
1	- ~~Classy~~ ~~Cassidy~~
1	+ Powerful Penny

data/vendor/plugins/haml/bin/css2sass CHANGED Viewed

@@ -3,11 +3,5 @@
 require File.dirname(__FILE__) + '/../lib/haml'
 require 'haml/exec'
-warn <<END
-DEPRECATION WARNING:
-The css2sass tool is deprecated and will be removed in Sass 3.2.
-Use the sass-convert tool instead.
-END
-opts = Haml::Exec::SassConvert.new(%w[--from css --to sass] + ARGV)
+opts = Haml::Exec::CSS2Sass.new(ARGV)
 opts.parse!

data/vendor/plugins/haml/doc-src/FAQ.md CHANGED Viewed

@@ -103,17 +103,6 @@ For example:
         really_move.it.into(    |
           :a => @helper)        |
-Note that sometimes it is valid to include lots of Ruby in a template
-when that Ruby is a helper call that passes in a lot of template information.
-Thus when a function has lots of arguments,
-it's possible to wrap it across multiple lines
-as long as each line ends in a comma.
-For example:
-    = link_to_remote "Add to cart",
-        :url => { :action => "add", :id => product.id },
-        :update => { :success => "cart", :failure => "error" }
 ### `form_for` is printing the form tag twice!
 Make sure you're calling it with `-`, not `=`.
@@ -132,9 +121,8 @@ in Haml, you have to do
 {#q-blank-page}
 There are several reasons these things might be happening.
-First of all, make sure that Haml really is installed;
-either you've loaded the gem (via `config.gem` in Rails 2.3 or in the Gemfile in Rails 3),
-or `vendor/plugins/haml` exists and contains files.
+First of all, make sure `vendor/plugins/haml` really exists
+and has an `init.rb` file in there.
 Then try restarting Mongrel or WEBrick or whatever you might be using.
 Finally, if none of these work,
@@ -180,8 +168,8 @@ from your Sass functions.
 ## You still haven't answered my question!
-Sorry! Try looking at the [Haml](http://haml-lang.com/docs/yardoc/HAML_REFERENCE.md.html)
-or [Sass](http://sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html) references,
+Sorry! Try looking at the Haml or Sass references,
+in the doucmentation for the haml and Sass modules, respectively.
 If you can't find an answer there,
 feel free to ask in `#haml` on irc.freenode.net
 or send an email to the [mailing list](http://groups.google.com/group/haml?hl=en).

data/vendor/plugins/haml/doc-src/HAML_CHANGELOG.md CHANGED Viewed

@@ -3,541 +3,6 @@
 * Table of contents
 {:toc}
-## 3.0.23
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.23).
-* Fix the error message for unloadable modules when running the executables under Ruby 1.9.2.
-* Fix an error when combining old-style and new-style attributes.
-## 3.0.22
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.22).
-* Allow an empty line after `case` but before `when`.
-* Remove `vendor/sass`, which snuck into the gem by mistake
-  and was causing trouble for Heroku users (thanks to [Jacques Crocker](http://railsjedi.com/)).
-* Support the Rails 3.1 template handler API.
-## 3.0.21
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.21).
-* Fix the permissions errors for good.
-## 3.0.20
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.20).
-* Fix some permissions errors.
-## 3.0.19
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.19).
-* Fix the `:encoding` option under Ruby 1.9.2.
-* Fix interpolated if statement when HTML escaping is enabled.
-* Allow the `--unix-newlines` flag to work on Unix, where it's a no-op.
-## 3.0.18
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.18).
-* Don't require `rake` in the gemspec, for bundler compatibility under
-  JRuby. Thanks to [Gordon McCreight](http://www.gmccreight.com/blog).
-* Get rid of the annoying RDoc errors on install.
-* Disambiguate references to the `Rails` module when `haml-rails` is installed.
-* Fix a bug in `haml_tag` that would allow duplicate attributes to be added
-  and make `data-` attributes not work.
-* Compatibility with Rails 3 final.
-## 3.0.17
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.17).
-* Understand that mingw counts as Windows.
-## 3.0.16
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.16).
-* Fix an html2haml ERB-parsing bug where ERB blocks were occasionally
-  left without indentation in Haml.
-* Fix parsing of `if` and `case` statements whose values were assigned to variables.
-  This is still bad style, though.
-* Fix `form_for` and `form_tag` when they're passed a block that
-  returns a string in a helper.
-## 3.0.15
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.15).
-There were no changes made to Haml between versions 3.0.14 and 3.0.15.
-## 3.0.14
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.14).
-* Allow CSS-style classes and ids to contain colons.
-* Fix an obscure bug with if statements.
-### Rails 3 Support
-* Don't use the `#returning` method, which Rails 3 no longer provides.
-## 3.0.13
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.13).
-## Rails 3 Support
-Support for Rails 3 versions prior to beta 4 has been removed.
-Upgrade to Rails 3.0.0.beta4 if you haven't already.
-### Minor Improvements
-* Properly process frozen strings with encoding declarations.
-## 3.0.12
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.12).
-## Rails 3 Support
-Apparently the last version broke in new and exciting ways under Rails 3,
-due to the inconsistent load order caused by certain combinations of gems.
-3.0.12 hacks around that inconsistency, and *should* be fully Rails 3-compatible.
-### Deprecated: Rails 3 Beta 3
-Haml's support for Rails 3.0.0.beta.3 has been deprecated.
-Haml 3.0.13 will only support 3.0.0.beta.4.
-## 3.0.11
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.11).
-## 3.0.10
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.10).
-### Appengine-JRuby Support
-The way we determine the location of the Haml installation
-no longer breaks the version of JRuby
-used by [`appengine-jruby`](http://code.google.com/p/appengine-jruby/).
-### Bug Fixes
-* Single-line comments are now handled properly by `html2haml`.
-## 3.0.9
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.9).
-There were no changes made to Haml between versions 3.0.8 and 3.0.9.
-A bug in Gemcutter caused the gem to be uploaded improperly.
-## 3.0.8
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.8).
-* Fix a bug with Rails versions prior to Rails 3.
-## 3.0.7
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.7).
-### Encoding Support
-Haml 3.0.7 adds support for Ruby-style `-# coding:` comments
-for declaring the encoding of a template.
-For details see {file:HAML_REFERENCE.md#encodings the reference}.
-This also slightly changes the behavior of Haml when the
-{file:HAML_REFERENCE.md#encoding-option `:encoding` option} is not set.
-Rather than defaulting to `"utf-8"`,
-it defaults to the encoding of the source document,
-and only falls back to `"utf-8"` if this encoding is `"us-ascii"`.
-The `haml` executable also now takes an `-E` option for specifying encoding,
-which works the same way as Ruby's `-E` option.
-### Other Changes
-* Default to the {file:HAML_REFERENCE.md#format-option `:html5` format}
-  when running under Rails 3,
-  since it defaults to HTML5 as well.
-### Bug Fixes
-* When generating Haml for something like `<span>foo</span>,`,
-  use `= succeed` rather than `- succeed` (which doesn't work).
-## 3.0.6
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.6).
-### Rails 2.3.7 Support
-This release fully supports Rails 2.3.7.
-### Rails 2.3.6 Support Removed
-Rails 2.3.6 was released with various bugs related to XSS-protection
-and interfacing with Haml.
-Rails 2.3.7 was released shortly after with fixes for these bugs.
-Thus, Haml no longer supports Rails 2.3.6,
-and anyone using it should upgrade to 2.3.7.
-Attempting to use Haml with Rails 2.3.6 will cause an error.
-## 3.0.5
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.5).
-### Rails 2.3.6 Support
-This release hacks around various bugs in Rails 2.3.6,
-bringing Haml up to full compatibility.
-### Rails 3 Support
-Make sure the `#capture` helper in Rails 3
-doesn't print its value directly to the template.
-## 3.0.4
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.4).
-There were no changes made to Haml between versions 3.0.3 and 3.0.4.
-## 3.0.3
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.3).
-### Rails 3 Support
-In order to make some Rails loading errors easier to debug,
-Sass will now raise an error if `Rails.root` is `nil` when Sass is loading.
-Previously, this would just cause the paths to be mis-set.
-## 3.0.2
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.2).
-There were no changes made to Haml between versions 3.0.1 and 3.0.2.
-## 3.0.1
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.1).
-### Installation in Rails
-`haml --rails` is no longer necessary for installing Haml in Rails.
-Now all you need to do is add `gem "haml"` to the Gemfile for Rails 3,
-or add `config.gem "haml"` to `config/environment.rb` for previous versions.
-`haml --rails` will still work,
-but it has been deprecated and will print an error message.
-It will not work in the next version of Haml.
-### Rails Test Speed
-The {file:HAML_REFERENCE.md#ugly-option `:ugly` option} is now on by default
-in the testing environment in Rails to help tests run faster.
-## 3.0.0
-{#3-0-0}
-[Tagged on GitHub](http://github.com/nex3/haml/commit/3.0.0).
-### Backwards Incompatibilities: Must Read!
-* The `puts` helper has been removed.
-  Use {Haml::Helpers#haml\_concat} instead.
-### More Useful Multiline
-Ruby code can now be wrapped across multiple lines
-as long as each line but the last ends in a comma.
-For example:
-    = link_to_remote "Add to cart",
-        :url => { :action => "add", :id => product.id },
-        :update => { :success => "cart", :failure => "error" }
-### `haml_tag` and `haml_concat` Improvements
-#### `haml_tag` with CSS Selectors
-The {Haml::Helpers#haml_tag haml\_tag} helper can now take a string
-using the same class/id shorthand as in standard Haml code.
-Manually-specified class and id attributes are merged,
-again as in standard Haml code.
-For example:
-    haml_tag('#foo') #=> <div id='foo' />
-    haml_tag('.bar') #=> <div class='bar' />
-    haml_tag('span#foo.bar') #=> <span class='bar' id='foo' />
-    haml_tag('span#foo.bar', :class => 'abc') #=> <span class='abc bar' id='foo' />
-    haml_tag('span#foo.bar', :id => 'abc') #=> <span class='bar' id='abc_foo' />
-Cheers, [S. Burkhard](http://github.com/hasclass/).
-#### `haml_tag` with Multiple Lines of Content
-The {Haml::Helpers#haml_tag haml\_tag} helper also does a better job
-of formatting tags with multiple lines of content.
-If a tag has multiple levels of content,
-that content is indented beneath the tag.
-For example:
-    haml_tag(:p, "foo\nbar") #=>
-      # <p>
-      #   foo
-      #   bar
-      # </p>
-#### `haml_tag` with Multiple Lines of Content
-Similarly, the {Haml::Helpers#haml_concat haml\_concat} helper
-will properly indent multiple lines of content.
-For example:
-    haml_tag(:p) {haml_concat "foo\nbar"} #=>
-      # <p>
-      #   foo
-      #   bar
-      # </p>
-#### `haml_tag` and `haml_concat` with `:ugly`
-When the {file:HAML_REFERENCE.md#ugly-option `:ugly` option} is enabled,
-{Haml::Helpers#haml_tag haml\_tag} and {Haml::Helpers#haml_concat haml\_concat}
-won't do any indentation of their arguments.
-### Basic Tag Improvements
-* It's now possible to customize the name used for {file:HAML_REFERENCE.md#object_reference_ object reference}
-  for a given object by implementing the `haml_object_ref` method on that object.
-  This method should return a string that will be used in place of the class name of the object
-  in the generated class and id.
-  Thanks to [Tim Carey-Smith](http://twitter.com/halorgium).
-* All attribute values may be non-String types.
-  Their `#to_s` method will be called to convert them to strings.
-  Previously, this only worked for attributes other than `class`.
-### `:class` and `:id` Attributes Accept Ruby Arrays
-In an attribute hash, the `:class` attribute now accepts an Array
-whose elements will be converted to strings and joined with <nobr>`" "`</nobr>.
-Likewise, the `:id` attribute now accepts an Array
-whose elements will be converted to strings and joined with `"_"`.
-The array will first be flattened and any elements that do not test as true
-will be stripped out. For example:
-    .column{:class => [@item.type, @item == @sortcol && [:sort, @sortdir]] }
-could render as any of:
-    class="column numeric sort ascending"
-    class="column numeric"
-    class="column sort descending"
-    class="column"
-depending on whether `@item.type` is `"numeric"` or `nil`,
-whether `@item == @sortcol`,
-and whether `@sortdir` is `"ascending"` or `"descending"`.
-A single value can still be specified.
-If that value evaluates to false it is ignored;
-otherwise it gets converted to a string.
-For example:
-    .item{:class => @item.is_empty? && "empty"}
-could render as either of:
-    class="item"
-    class="item empty"
-Thanks to [Ronen Barzel](http://www.ronenbarzel.org/).
-### HTML5 Custom Data Attributes
-Creating an attribute named `:data` with a Hash value
-will generate [HTML5 custom data attributes](http://www.whatwg.org/specs/web-apps/current-work/multipage/elements.html#embedding-custom-non-visible-data).
-For example:
-    %div{:data => {:author_id => 123, :post_id => 234}}
-Will compile to:
-    <div data-author_id='123' data-post_id='234'></div>
-Thanks to [John Reilly](http://twitter.com/johnreilly).
-### More Powerful `:autoclose` Option
-The {file:HAML_REFERENCE.md#attributes_option `:attributes`} option
-can now take regular expressions that specify which tags to make self-closing.
-### `--double-quote-attributes` Option
-The Haml executable now has a `--double-quote-attributes` option (short form: `-q`)
-that causes attributes to use a double-quote mark rather than single-quote.
-Thanks to [Charles Roper](http://charlesroper.com/).
-### `:css` Filter
-Haml now supports a {file:HAML_REFERENCE.md#css-filter `:css` filter}
-that surrounds the filtered text with `<style>` and CDATA tags.
-### `haml-spec` Integration
-We've added the cross-implementation tests from the [haml-spec](http://github.com/norman/haml-spec) project
-to the standard Haml test suite, to be sure we remain compatible with the base functionality
-of the many and varied [Haml implementations](http://en.wikipedia.org/wiki/Haml#Implementations).
-### Ruby 1.9 Support
-* Haml and `html2haml` now produce more descriptive errors
-  when given a template with invalid byte sequences for that template's encoding,
-  including the line number and the offending character.
-* Haml and `html2haml` now accept Unicode documents with a
-  [byte-order-mark](http://en.wikipedia.org/wiki/Byte_order_mark).
-### Rails Support
-* When `form_for` is used with `=`, or `form_tag` is used with `=` and a block,
-  they will now raise errors explaining that they should be used with `-`.
-  This is similar to how {Haml::Helpers#haml\_concat} behaves,
-  and will hopefully clear up some difficult bugs for some users.
-### Rip Support
-Haml is now compatible with the [Rip](http://hellorip.com/) package management system.
-Thanks to [Josh Peek](http://joshpeek.com/).
-### `html2haml` Improvements
-* Ruby blocks within ERB are now supported.
-  The Haml code is properly indented and the `end`s are removed.
-  This includes methods with blocks and all language constructs
-  such as `if`, `begin`, and `case`.
-  For example:
-      <% content_for :footer do %>
-        <p>Hi there!</p>
-      <% end %>
-  is now transformed into:
-      - content_for :footer do
-        %p Hi there!
-  Thanks to [Jack Chen](http://chendo.net) and [Dr. Nic Williams](http://drnicwilliams)
-  for inspiring this and creating the first draft of the code.
-* Inline HTML text nodes are now transformed into inline Haml text.
-  For example, `<p>foo</p>` now becomes `%p foo`, whereas before it became:
-      %p
-        foo
-  The same is true for inline comments,
-  and inline ERB when running in ERB mode:
-  `<p><%= foo %></p>` will now become `%p= foo`.
-* ERB included within text is now transformed into Ruby interpolation.
-  For example:
-      <p>
-        Foo <%= bar %> baz!
-        Flip <%= bang %>.
-      </p>
-  is now transformed into:
-      %p
-        Foo #{bar} baz!
-        Flip #{bang}.
-* `<script>` tags are now transformed into `:javascript` filters,
-  and `<style>` tags into `:css` filters.
-  and indentation is preserved.
-  For example:
-      <script type="text/javascript">
-        function foo() {
-          return 12;
-        }
-      </script>
-  is now transformed into:
-      :javascript
-        function foo() {
-          return 12;
-        }
-* `<pre>` and `<textarea>` tags are now transformed into the `:preserve` filter.
-  For example:
-      <pre>Foo
-        bar
-          baz</pre>
-  is now transformed into:
-      %pre
-        :preserve
-          Foo
-            bar
-              baz
-* Self-closing tags (such as `<br />`) are now transformed into
-  self-closing Haml tags (like `%br/`).
-* IE conditional comments are now properly parsed.
-* Attributes are now output in a more-standard format,
-  without spaces within the curly braces
-  (e.g. `%p{:foo => "bar"}` as opposed to `%p{ :foo => "bar" }`).
-* IDs and classes containing `#` and `.` are now output as string attributes
-  (e.g. `%p{:class => "foo.bar"}`).
-* Attributes are now sorted, to maintain a deterministic order.
-* `>` or {Haml::Helpers#succeed #succeed} are inserted where necessary
-  when inline formatting is used.
-* Multi-line ERB statements are now properly indented,
-  and those without any content are removed.
-### Minor Improvements
-* {Haml::Helpers#capture_haml capture\_haml} is now faster when using `:ugly`.
-  Thanks to [Alf Mikula](http://alfmikula.blogspot.com/).
-* Add an `RDFa` doctype shortcut.
 ## 2.2.24
 [Tagged on GitHub](http://github.com/nex3/haml/commit/2.2.24).
@@ -1008,7 +473,7 @@ encoding errors when dealing with non-ASCII input data.
 This helper is being deprecated for the obvious reason
 that it conflicts with the `Kernel#puts` method.
 I'm ashamed I ever chose this name.
-Use `haml_concat` instead and spare me the embarrassment.
+Use `haml_tag` instead and spare me the embarrassment.
 #### `= haml_tag`