There is a possible shell escape sequence injection vulnerability in the Lint and CommonLogger components of Rack. This vulnerability has been assigned the CVE identifier CVE-2022-30123.

Versions Affected: All. Not affected: None Fixed Versions: 2.0.9.1, 2.1.4.1, 2.2.3.1

Impact

Carefully crafted requests can cause shell escape sequences to be written to the terminal via Rack's Lint middleware and CommonLogger middleware. These escape sequences can be leveraged to possibly execute commands in the victim's terminal.

Impacted applications will have either of these middleware installed, and vulnerable apps may have something like this:

use Rack::Lint

Or

use Rack::CommonLogger

All users running an affected release should either upgrade or use one of the workarounds immediately.

Workarounds

Remove these middleware from your application

Summary

Rack::Request#POST reads the entire request body into memory for Content-Type: application/x-www-form-urlencoded, calling rack.input.read(nil) without enforcing a length or cap. Large request bodies can therefore be buffered completely into process memory before parsing, leading to denial of service (DoS) through memory exhaustion.

Details

When handling non-multipart form submissions, Rack’s request parser performs:

form_vars = get_header(RACK_INPUT).read

Since read is called with no argument, the entire request body is loaded into a Ruby String. This occurs before query parameter parsing or enforcement of any params_limit. As a result, Rack applications without an upstream body-size limit can experience unbounded memory allocation proportional to request size.

Impact

Attackers can send large application/x-www-form-urlencoded bodies to consume process memory, causing slowdowns or termination by the operating system (OOM). The effect scales linearly with request size and concurrency. Even with parsing limits configured, the issue occurs before those limits are enforced.

Mitigation

• Update to a patched version of Rack that enforces form parameter limits using query_parser.bytesize_limit, preventing unbounded reads of application/x-www-form-urlencoded bodies.
• Enforce strict maximum body size at the proxy or web server layer (e.g., Nginx client_max_body_size, Apache LimitRequestBody).

Summary

Rack::Multipart::Parser can accumulate unbounded data when a multipart part’s header block never terminates with the required blank line (CRLFCRLF). The parser keeps appending incoming bytes to memory without a size cap, allowing a remote attacker to exhaust memory and cause a denial of service (DoS).

Details

While reading multipart headers, the parser waits for CRLFCRLF using:

@sbuf.scan_until(/(.*?\r
)\r
/m)

If the terminator never appears, it continues appending data (@sbuf.concat(content)) indefinitely. There is no limit on accumulated header bytes, so a single malformed part can consume memory proportional to the request body size.

Impact

Attackers can send incomplete multipart headers to trigger high memory use, leading to process termination (OOM) or severe slowdown. The effect scales with request size limits and concurrency. All applications handling multipart uploads may be affected.

Mitigation

• Upgrade to a patched Rack version that caps per-part header size (e.g., 64 KiB).

• Until then, restrict maximum request sizes at the proxy or web server layer (e.g., Nginx client_max_body_size).

Summary

Rack::Multipart::Parser stores non-file form fields (parts without a filename) entirely in memory as Ruby String objects. A single large text field in a multipart/form-data request (hundreds of megabytes or more) can consume equivalent process memory, potentially leading to out-of-memory (OOM) conditions and denial of service (DoS).

Details

During multipart parsing, file parts are streamed to temporary files, but non-file parts are buffered into memory:

body = String.new  # non-file → in-RAM buffer
@mime_parts[mime_index].body << content

There is no size limit on these in-memory buffers. As a result, any large text field—while technically valid—will be loaded fully into process memory before being added to params.

Impact

Attackers can send large non-file fields to trigger excessive memory usage. Impact scales with request size and concurrency, potentially leading to worker crashes or severe garbage-collection overhead. All Rack applications processing multipart form submissions are affected.

Mitigation

• Upgrade: Use a patched version of Rack that enforces a reasonable size cap for non-file fields (e.g., 2 MiB).

• Workarounds:

  • Restrict maximum request body size at the web-server or proxy layer (e.g., Nginx client_max_body_size).
  • Validate and reject unusually large form fields at the application level.

Summary

Rack::Multipart::Parser buffers the entire multipart preamble (bytes before the first boundary) in memory without any size limit. A client can send a large preamble followed by a valid boundary, causing significant memory use and potential process termination due to out-of-memory (OOM) conditions.

Details

While searching for the first boundary, the parser appends incoming data into a shared buffer (@sbuf.concat(content)) and scans for the boundary pattern:

@sbuf.scan_until(@body_regex)

If the boundary is not yet found, the parser continues buffering data indefinitely. There is no trimming or size cap on the preamble, allowing attackers to send arbitrary amounts of data before the first boundary.

Impact

Remote attackers can trigger large transient memory spikes by including a long preamble in multipart/form-data requests. The impact scales with allowed request sizes and concurrency, potentially causing worker crashes or severe slowdown due to garbage collection.

Mitigation

• Upgrade: Use a patched version of Rack that enforces a preamble size limit (e.g., 16 KiB) or discards preamble data entirely per RFC 2046 § 5.1.1.

• Workarounds:

  • Limit total request body size at the proxy or web server level.
  • Monitor memory and set per-process limits to prevent OOM conditions.

Summary

Rack::QueryParser in version < 2.2.18 enforces its params_limit only for parameters separated by &, while still splitting on both & and ;. As a result, attackers could use ; separators to bypass the parameter count limit and submit more parameters than intended.

Details

The issue arises because Rack::QueryParser#check_query_string counts only & characters when determining the number of parameters, but the default separator regex DEFAULT_SEP = /[&;] */n splits on both & and ;. This mismatch means that queries using ; separators were not included in the parameter count, allowing params_limit to be bypassed.

Other safeguards (bytesize_limit and key_space_limit) still applied, but did not prevent this particular bypass.

Impact

Applications or middleware that directly invoke Rack::QueryParser with its default configuration (no explicit delimiter) could be exposed to increased CPU and memory consumption. This can be abused as a limited denial-of-service vector.

Rack::Request, the primary entry point for typical Rack applications, uses QueryParser in a safe way and does not appear vulnerable by default. As such, the severity is considered low, with the impact limited to edge cases where QueryParser is used directly.

Mitigation

• Upgrade to a patched version of Rack where both & and ; are counted consistently toward params_limit.
• If upgrading is not immediately possible, configure QueryParser with an explicit delimiter (e.g., &) to avoid the mismatch.
• As a general precaution, enforce query string and request size limits at the web server or proxy layer (e.g., Nginx, Apache, or a CDN) to mitigate excessive parsing overhead.

Summary

Rack::QueryParser parses query strings and application/x-www-form-urlencoded bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters.

Details

The vulnerability arises because Rack::QueryParser iterates over each &-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing.

Impact

An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted.

Mitigation

• Update to a version of Rack that limits the number of parameters parsed, or
• Use middleware to enforce a maximum query string size or parameter count, or
• Employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies.

Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

Summary

Rack::Static can serve files under the specified root: even if urls: are provided, which may expose other files under the specified root: unexpectedly.

Details

The vulnerability occurs because Rack::Static does not properly sanitize user-supplied paths before serving files. Specifically, encoded path traversal sequences are not correctly validated, allowing attackers to access files outside the designated static file directory.

Impact

By exploiting this vulnerability, an attacker can gain access to all files under the specified root: directory, provided they are able to determine then path of the file.

Mitigation

• Update to the latest version of Rack, or
• Remove usage of Rack::Static, or
• Ensure that root: points at a directory path which only contains files which should be accessed publicly.

It is likely that a CDN or similar static file server would also mitigate the issue.

There is a possible DoS vulnerability in the Multipart MIME parsing code in Rack. This vulnerability has been assigned the CVE identifier CVE-2023-27530.

Versions Affected: All. Not affected: None Fixed Versions: 3.0.4.2, 2.2.6.3, 2.1.4.3, 2.0.9.3

Impact

The Multipart MIME parsing code in Rack limits the number of file parts, but does not limit the total number of parts that can be uploaded. Carefully crafted requests can abuse this and cause multipart parsing to take longer than expected.

All users running an affected release should either upgrade or use one of the workarounds immediately.

Workarounds

A proxy can be configured to limit the POST body size which will mitigate this issue.

There is a possible denial of service vulnerability in the Range header parsing component of Rack. This vulnerability has been assigned the CVE identifier CVE-2022-44570.

Versions Affected: >= 1.5.0 Not affected: None. Fixed Versions: 2.0.9.2, 2.1.4.2, 2.2.6.2, 3.0.4.1

Impact

Carefully crafted input can cause the Range header parsing component in Rack to take an unexpected amount of time, possibly resulting in a denial of service attack vector. Any applications that deal with Range requests (such as streaming applications, or applications that serve files) may be impacted.

Workarounds

There are no feasible workarounds for this issue.

There is a possible denial of service vulnerability in the multipart parsing component of Rack. This vulnerability has been assigned the CVE identifier CVE-2022-30122.

Versions Affected: >= 1.2 Not affected: < 1.2 Fixed Versions: 2.0.9.1, 2.1.4.1, 2.2.3.1

Impact

Carefully crafted multipart POST requests can cause Rack's multipart parser to take much longer than expected, leading to a possible denial of service vulnerability.

Impacted code will use Rack's multipart parser to parse multipart posts. This includes directly using the multipart parser like this:

params = Rack::Multipart.parse_multipart(env)

But it also includes reading POST data from a Rack request object like this:

p request.POST # read POST data
p request.params # reads both query params and POST data

All users running an affected release should either upgrade or use one of the workarounds immediately.

Workarounds

There are no feasible workarounds for this issue.

It is possible to forge a secure or host-only cookie prefix in Rack using an arbitrary cookie write by using URL encoding (percent-encoding) on the name of the cookie. This could result in an application that is dependent on this prefix to determine if a cookie is safe to process being manipulated into processing an insecure or cross-origin request. This vulnerability has been assigned the CVE identifier CVE-2020-8184.

Versions Affected: rack < 2.2.3, rack < 2.1.4 Not affected: Applications which do not rely on __Host- and __Secure- prefixes to determine if a cookie is safe to process Fixed Versions: rack >= 2.2.3, rack >= 2.1.4

Impact

An attacker may be able to trick a vulnerable application into processing an insecure (non-SSL) or cross-origin request if they can gain the ability to write arbitrary cookies that are sent to the application.

Workarounds

If your application is impacted but you cannot upgrade to the released versions or apply the provided patch, this issue can be temporarily addressed by adding the following workaround:

module Rack
  module Utils
    module_function def parse_cookies_header(header)
      return {} unless header
      header.split(/[;] */n).each_with_object({}) do |cookie, cookies|
        next if cookie.empty?
        key, value = cookie.split('=', 2)
        cookies[key] = (unescape(value) rescue value) unless cookies.key?(key)
      end
    end
  end
end

There was a possible directory traversal vulnerability in the Rack::Directory app that is bundled with Rack.

Versions Affected: rack < 2.2.0 Not affected: Applications that do not use Rack::Directory. Fixed Versions: 2.1.3, >= 2.2.0

Impact

If certain directories exist in a director that is managed by Rack::Directory, an attacker could, using this vulnerability, read the contents of files on the server that were outside of the root specified in the Rack::Directory initializer.

Workarounds

Until such time as the patch is applied or their Rack version is upgraded, we recommend that developers do not use Rack::Directory in their applications.