rack 3.0.0 → 3.2.7

data/lib/rack/multipart/parser.rb

@@ -3,51 +3,90 @@
 require 'strscan'
 
 require_relative '../utils'
+require_relative '../bad_request'
 
 module Rack
   module Multipart
-    class MultipartPartLimitError < Errno::EMFILE; end
+    class MultipartPartLimitError < Errno::EMFILE
+      include BadRequest
+    end
+
+    class MultipartTotalPartLimitError < StandardError
+      include BadRequest
+    end
 
     # Use specific error class when parsing multipart request
     # that ends early.
-    class EmptyContentError < ::EOFError; end
+    class EmptyContentError < ::EOFError
+      include BadRequest
+    end
 
     # Base class for multipart exceptions that do not subclass from
     # other exception classes for backwards compatibility.
-    class Error < StandardError; end
+    class BoundaryTooLongError < StandardError
+      include BadRequest
+    end
 
-    EOL = "\r\n"
-    MULTIPART = %r|\Amultipart/.*boundary=\"?([^\";,]+)\"?|ni
-    TOKEN = /[^\s()<>,;:\\"\/\[\]?=]+/
-    CONDISP = /Content-Disposition:\s*#{TOKEN}\s*/i
-    VALUE = /"(?:\\"|[^"])*"|#{TOKEN}/
-    BROKEN = /^#{CONDISP}.*;\s*filename=(#{VALUE})/i
-    MULTIPART_CONTENT_TYPE = /Content-Type: (.*)#{EOL}/ni
-    MULTIPART_CONTENT_DISPOSITION = /Content-Disposition:.*;\s*name=(#{VALUE})/ni
-    MULTIPART_CONTENT_ID = /Content-ID:\s*([^#{EOL}]*)/ni
-    # Updated definitions from RFC 2231
-    ATTRIBUTE_CHAR = %r{[^ \t\v\n\r)(><@,;:\\"/\[\]?='*%]}
-    ATTRIBUTE = /#{ATTRIBUTE_CHAR}+/
-    SECTION = /\*[0-9]+/
-    REGULAR_PARAMETER_NAME = /#{ATTRIBUTE}#{SECTION}?/
-    REGULAR_PARAMETER = /(#{REGULAR_PARAMETER_NAME})=(#{VALUE})/
-    EXTENDED_OTHER_NAME = /#{ATTRIBUTE}\*[1-9][0-9]*\*/
-    EXTENDED_OTHER_VALUE = /%[0-9a-fA-F]{2}|#{ATTRIBUTE_CHAR}/
-    EXTENDED_OTHER_PARAMETER = /(#{EXTENDED_OTHER_NAME})=(#{EXTENDED_OTHER_VALUE}*)/
-    EXTENDED_INITIAL_NAME = /#{ATTRIBUTE}(?:\*0)?\*/
-    EXTENDED_INITIAL_VALUE = /[a-zA-Z0-9\-]*'[a-zA-Z0-9\-]*'#{EXTENDED_OTHER_VALUE}*/
-    EXTENDED_INITIAL_PARAMETER = /(#{EXTENDED_INITIAL_NAME})=(#{EXTENDED_INITIAL_VALUE})/
-    EXTENDED_PARAMETER = /#{EXTENDED_INITIAL_PARAMETER}|#{EXTENDED_OTHER_PARAMETER}/
-    DISPPARM = /;\s*(?:#{REGULAR_PARAMETER}|#{EXTENDED_PARAMETER})\s*/
-    RFC2183 = /^#{CONDISP}(#{DISPPARM})+$/i
+    # Prefer to use the BoundaryTooLongError class or Rack::BadRequest.
+    Error = BoundaryTooLongError
 
+    EOL = "\r\n"
+    FWS = /[ \t]+(?:\r\n[ \t]+)?/ # whitespace with optional folding
+    HEADER_VALUE = "(?:[^\r\n]|\r\n[ \t])*" # anything but a non-folding CRLF
+    MULTIPART = %r|\Amultipart/.*?boundary(\s*)=\"?([^\";,]+)\"?|ni
+    MULTIPART_CONTENT_TYPE = /^Content-Type:#{FWS}?(#{HEADER_VALUE})/ni
+    MULTIPART_CONTENT_DISPOSITION = /^Content-Disposition:#{FWS}?(#{HEADER_VALUE})/ni
+    MULTIPART_CONTENT_ID = /^Content-ID:#{FWS}?(#{HEADER_VALUE})/ni
+
+    # Rack::Multipart::Parser handles parsing of multipart/form-data requests.
+    #
+    # File Parameter Contents
+    #
+    # When processing file uploads, the parser returns a hash containing
+    # information about uploaded files. For +file+ parameters, the hash includes:
+    #
+    # * +:filename+ - The original filename, already URL decoded by the parser
+    # * +:type+ - The content type of the uploaded file  
+    # * +:name+ - The parameter name from the form
+    # * +:tempfile+ - A Tempfile object containing the uploaded data
+    # * +:head+ - The raw header content for this part
     class Parser
       BUFSIZE = 1_048_576
       TEXT_PLAIN = "text/plain"
       TEMPFILE_FACTORY = lambda { |filename, content_type|
-        Tempfile.new(["RackMultipart", ::File.extname(filename.gsub("\0", '%00'))])
+        extension = ::File.extname(filename.gsub("\0", '%00'))[0, 129]
+
+        Tempfile.new(["RackMultipart", extension])
       }
 
+      BOUNDARY_START_LIMIT = 16 * 1024
+      private_constant :BOUNDARY_START_LIMIT
+
+      MIME_HEADER_BYTESIZE_LIMIT = 64 * 1024
+      private_constant :MIME_HEADER_BYTESIZE_LIMIT
+
+      env_int = lambda do |key, val|
+        if str_val = ENV[key]
+          begin
+            val = Integer(str_val, 10)
+          rescue ArgumentError
+            raise ArgumentError, "non-integer value provided for environment variable #{key}"
+          end
+        end
+
+        val
+      end
+
+      BUFFERED_UPLOAD_BYTESIZE_LIMIT = env_int.call("RACK_MULTIPART_BUFFERED_UPLOAD_BYTESIZE_LIMIT", 16 * 1024 * 1024)
+      private_constant :BUFFERED_UPLOAD_BYTESIZE_LIMIT
+
+      bytesize_limit = env_int.call("RACK_MULTIPART_PARSER_BYTESIZE_LIMIT", 10 * 1024 * 1024 * 1024)
+      PARSER_BYTESIZE_LIMIT = bytesize_limit > 0 ? bytesize_limit : nil
+      private_constant :PARSER_BYTESIZE_LIMIT
+
+      CONTENT_DISPOSITION_QUOTED_ESCAPES_LIMIT = env_int.call("RACK_MULTIPART_CONTENT_DISPOSITION_QUOTED_ESCAPES_LIMIT", 8 * 1024)
+      private_constant :CONTENT_DISPOSITION_QUOTED_ESCAPES_LIMIT
+
       class BoundedIO # :nodoc:
         def initialize(io, content_length)
           @io             = io
@@ -84,7 +123,15 @@ module Rack
         return unless content_type
         data = content_type.match(MULTIPART)
         return unless data
-        data[1]
+
+        unless data[1].empty?
+          raise Error, "whitespace between boundary parameter name and equal sign"
+        end
+        if data.post_match.match?(/boundary\s*=/i)
+          raise BoundaryTooLongError, "multiple boundary parameters found in multipart content type"
+        end
+
+        data[2]
       end
 
       def self.parse(io, content_length, content_type, tmpfile, bufsize, qp)
@@ -93,10 +140,14 @@ module Rack
         boundary = parse_boundary content_type
         return EMPTY unless boundary
 
+        if PARSER_BYTESIZE_LIMIT && content_length && content_length > PARSER_BYTESIZE_LIMIT
+          raise Error, "multipart Content-Length #{content_length} exceeds limit of #{PARSER_BYTESIZE_LIMIT} bytes"
+        end
+
         if boundary.length > 70
           # RFC 1521 Section 7.2.1 imposes a 70 character maximum for the boundary.
           # Most clients use no more than 55 characters.
-          raise Error, "multipart boundary size too large (#{boundary.length} characters)"
+          raise BoundaryTooLongError, "multipart boundary size too large (#{boundary.length} characters)"
         end
 
         io = BoundedIO.new(io, content_length) if content_length
@@ -166,7 +217,7 @@ module Rack
 
           @mime_parts[mime_index] = klass.new(body, head, filename, content_type, name)
 
-          check_open_files
+          check_part_limits
         end
 
         def on_mime_body(mime_index, content)
@@ -178,13 +229,23 @@ module Rack
 
         private
 
-        def check_open_files
-          if Utils.multipart_part_limit > 0
-            if @open_files >= Utils.multipart_part_limit
+        def check_part_limits
+          file_limit = Utils.multipart_file_limit
+          part_limit = Utils.multipart_total_part_limit
+
+          if file_limit && file_limit > 0
+            if @open_files >= file_limit
               @mime_parts.each(&:close)
               raise MultipartPartLimitError, 'Maximum file multiparts in content reached'
             end
           end
+
+          if part_limit && part_limit > 0
+            if @mime_parts.size >= part_limit
+              @mime_parts.each(&:close)
+              raise MultipartTotalPartLimitError, 'Maximum total multiparts in content reached'
+            end
+          end
         end
       end
 
@@ -197,15 +258,22 @@ module Rack
 
         @state = :FAST_FORWARD
         @mime_index = 0
+        @body_retained = nil
+        @retained_size = 0
+        @total_bytes_read = (0 if PARSER_BYTESIZE_LIMIT)
+        @content_disposition_quoted_escapes = 0
         @collector = Collector.new tempfile
 
         @sbuf = StringScanner.new("".dup)
         @body_regex = /(?:#{EOL}|\A)--#{Regexp.quote(boundary)}(?:#{EOL}|--)/m
+        @body_regex_at_end = /#{@body_regex}\z/m
+        @end_boundary_size = boundary.bytesize + 4 # (-- at start, -- at finish)
         @rx_max_size = boundary.bytesize + 6 # (\r\n-- at start, either \r\n or -- at finish)
         @head_regex = /(.*?#{EOL})#{EOL}/m
       end
 
       def parse(io)
+        @total_bytes_read &&= nil if io.is_a?(BoundedIO)
         outbuf = String.new
         read_data(io, outbuf)
 
@@ -232,7 +300,8 @@ module Rack
         @collector.each do |part|
           part.get_data do |data|
             tag_multipart_encoding(part.filename, part.content_type, part.name, data)
-            @query_parser.normalize_params(@params, part.name, data)
+            name, data = handle_dummy_encoding(part.name, data)
+            @query_parser.normalize_params(@params, name, data)
           end
         end
         MultipartInfo.new @params.to_params_hash, @collector.find_all(&:file?).map(&:body)
@@ -240,15 +309,15 @@ module Rack
 
       private
 
-      def dequote(str) # From WEBrick::HTTPUtils
-        ret = (/\A"(.*)"\Z/ =~ str) ? $1 : str.dup
-        ret.gsub!(/\\(.)/, "\\1")
-        ret
-      end
-
       def read_data(io, outbuf)
         content = io.read(@bufsize, outbuf)
         handle_empty_content!(content)
+        if @total_bytes_read
+          @total_bytes_read += content.bytesize
+          if @total_bytes_read > PARSER_BYTESIZE_LIMIT
+            raise Error, "multipart upload exceeds limit of #{PARSER_BYTESIZE_LIMIT} bytes"
+          end
+        end
         @sbuf.concat(content)
       end
 
@@ -267,8 +336,19 @@ module Rack
             @state = :MIME_HEAD
             return
           when :END_BOUNDARY
-            # invalid multipart upload, but retry for opening boundary
+            # invalid multipart upload
+            if @sbuf.pos == @end_boundary_size && @sbuf.rest == EOL
+              # stop parsing a buffer if a buffer is only an end boundary.
+              @state = :DONE
+              return
+            end
+
+            # retry for opening boundary
           else
+            # We raise if we don't find the multipart boundary, to avoid unbounded memory
+            # buffering. Note that the actual limit is the higher of 16KB and the buffer size (1MB by default)
+            raise Error, "multipart boundary not found within limit" if @sbuf.string.bytesize > BOUNDARY_START_LIMIT
+
             # no boundary found, keep reading data
             return :want_read
           end
@@ -285,32 +365,143 @@ module Rack
         end
       end
 
+      CONTENT_DISPOSITION_MAX_PARAMS = 16
+      CONTENT_DISPOSITION_MAX_BYTES = 1536
+      OBS_UNFOLD = /\r\n([ \t])/
+      private_constant :OBS_UNFOLD
+
       def handle_mime_head
         if @sbuf.scan_until(@head_regex)
           head = @sbuf[1]
           content_type = head[MULTIPART_CONTENT_TYPE, 1]
-          if name = head[MULTIPART_CONTENT_DISPOSITION, 1]
-            name = dequote(name)
+          content_type.gsub!(OBS_UNFOLD, '\1') if content_type
+
+          if (disposition = head[MULTIPART_CONTENT_DISPOSITION, 1]) &&
+              disposition.bytesize <= CONTENT_DISPOSITION_MAX_BYTES
+
+            # Implement OBS unfolding (RFC 5322 Section 2.2.3)
+            disposition.gsub!(OBS_UNFOLD, '\1')
+
+            # ignore actual content-disposition value (should always be form-data)
+            i = disposition.index(';')
+            disposition.slice!(0, i+1)
+            param = nil
+            num_params = 0
+
+            # Parse parameter list
+            while i = disposition.index('=')
+              # Only parse up to max parameters, to avoid potential denial of service
+              num_params += 1
+              break if num_params > CONTENT_DISPOSITION_MAX_PARAMS
+
+              # Found end of parameter name, ensure forward progress in loop
+              param = disposition.slice!(0, i+1)
+
+              # Remove ending equals and preceding whitespace from parameter name
+              param.chomp!('=')
+              param.lstrip!
+
+              if disposition[0] == '"'
+                # Parameter value is quoted, parse it, handling backslash escapes
+                disposition.slice!(0, 1)
+                value = String.new
+
+                while i = disposition.index(/(["\\])/)
+                  c = $1
+
+                  # Append all content until ending quote or escape
+                  value << disposition.slice!(0, i)
+
+                  # Remove either backslash or ending quote,
+                  # ensures forward progress in loop
+                  disposition.slice!(0, 1)
+
+                  # stop parsing parameter value if found ending quote
+                  break if c == '"'
+
+                  @content_disposition_quoted_escapes += 1
+                  if @content_disposition_quoted_escapes > CONTENT_DISPOSITION_QUOTED_ESCAPES_LIMIT
+                    raise Error, "number of quoted escapes during content disposition parsing exceeds limit"
+                  end
+
+                  escaped_char = disposition.slice!(0, 1)
+                  if param == 'filename' && escaped_char != '"'
+                    # Possible IE uploaded filename, append both escape backslash and value
+                    value << c << escaped_char
+                  else
+                    # Other only append escaped value
+                    value << escaped_char
+                  end
+                end
+              else
+                if i = disposition.index(';')
+                  # Parameter value unquoted (which may be invalid), value ends at semicolon
+                  value = disposition.slice!(0, i)
+                else
+                  # If no ending semicolon, assume remainder of line is value and stop
+                  # parsing
+                  disposition.strip!
+                  value = disposition
+                  disposition = ''
+                end
+              end
+
+              case param
+              when 'name'
+                name = value
+              when 'filename'
+                filename = value
+              when 'filename*'
+                filename_star = value
+              # else
+              # ignore other parameters
+              end
+
+              # skip trailing semicolon, to proceed to next parameter
+              if i = disposition.index(';')
+                disposition.slice!(0, i+1)
+              end
+            end
           else
             name = head[MULTIPART_CONTENT_ID, 1]
           end
 
-          filename = get_filename(head)
+          if filename_star
+            encoding, _, filename = filename_star.split("'", 3)
+            filename = normalize_filename(filename || '')
+            filename.force_encoding(find_encoding(encoding))
+          elsif filename
+            filename = normalize_filename(filename)
+          end
 
           if name.nil? || name.empty?
             name = filename || "#{content_type || TEXT_PLAIN}[]".dup
           end
 
+          # Mime part head data is retained for both TempfilePart and BufferPart
+          # for the entireity of the parse, even though it isn't used for BufferPart.
+          update_retained_size(head.bytesize)
+
+          # If a filename is given, a TempfilePart will be used, so the body will
+          # not be buffered in memory. However, if a filename is not given, a BufferPart
+          # will be used, and the body will be buffered in memory.
+          @body_retained = !filename
+
           @collector.on_mime_head @mime_index, head, filename, content_type, name
           @state = :MIME_BODY
         else
-          :want_read
+          # We raise if the mime part header is too large, to avoid unbounded memory
+          # buffering. Note that the actual limit is the higher of 64KB and the buffer size (1MB by default)
+          raise Error, "multipart mime part header too large" if @sbuf.rest.bytesize > MIME_HEADER_BYTESIZE_LIMIT
+
+          return :want_read
         end
       end
 
       def handle_mime_body
         if (body_with_boundary = @sbuf.check_until(@body_regex)) # check but do not advance the pointer yet
-          body = body_with_boundary.sub(/#{@body_regex}\z/m, '') # remove the boundary from the string
+          body = body_with_boundary.sub(@body_regex_at_end, '') # remove the boundary from the string
+          update_retained_size(body.bytesize) if @body_retained
           @collector.on_mime_body @mime_index, body
           @sbuf.pos += body.length + 2 # skip \r\n after the content
           @state = :CONSUME_TOKEN
@@ -319,7 +510,9 @@ module Rack
           # Save what we have so far
           if @rx_max_size < @sbuf.rest_size
             delta = @sbuf.rest_size - @rx_max_size
-            @collector.on_mime_body @mime_index, @sbuf.peek(delta)
+            body = @sbuf.peek(delta)
+            update_retained_size(body.bytesize) if @body_retained
+            @collector.on_mime_body @mime_index, body
             @sbuf.pos += delta
             @sbuf.string = @sbuf.rest
           end
@@ -327,6 +520,13 @@ module Rack
         end
       end
 
+      def update_retained_size(size)
+        @retained_size += size
+        if @retained_size > BUFFERED_UPLOAD_BYTESIZE_LIMIT
+          raise Error, "multipart data over retained size limit"
+        end
+      end
+
       # Scan until the we find the start or end of the boundary.
       # If we find it, return the appropriate symbol for the start or
       # end of the boundary.  If we don't find the start or end of the
@@ -340,39 +540,14 @@ module Rack
         end
       end
 
-      def get_filename(head)
-        filename = nil
-        case head
-        when RFC2183
-          params = Hash[*head.scan(DISPPARM).flat_map(&:compact)]
-
-          if filename = params['filename*']
-            encoding, _, filename = filename.split("'", 3)
-          elsif filename = params['filename']
-            filename = $1 if filename =~ /^"(.*)"$/
-          end
-        when BROKEN
-          filename = $1
-          filename = $1 if filename =~ /^"(.*)"$/
-        end
-
-        return unless filename
-
+      def normalize_filename(filename)
         if filename.scan(/%.?.?/).all? { |s| /%[0-9a-fA-F]{2}/.match?(s) }
           filename = Utils.unescape_path(filename)
         end
 
         filename.scrub!
 
-        if filename !~ /\\[^\\"]/
-          filename = filename.gsub(/\\(.)/, '\1')
-        end
-
-        if encoding
-          filename.force_encoding ::Encoding.find(encoding)
-        end
-
-        filename
+        filename.split(/[\/\\]/).last || String.new
       end
 
       CHARSET = "charset"
@@ -398,11 +573,7 @@ module Rack
               v.strip!
               v = v[1..-2] if v.start_with?('"') && v.end_with?('"')
               if k == "charset"
-                encoding = begin
-                  Encoding.find v
-                rescue ArgumentError
-                  Encoding::BINARY
-                end
+                encoding = find_encoding(v)
               end
             end
           end
@@ -412,6 +583,34 @@ module Rack
         body.force_encoding(encoding)
       end
 
+      # Return the related Encoding object. However, because
+      # enc is submitted by the user, it may be invalid, so
+      # use a binary encoding in that case.
+      def find_encoding(enc)
+        Encoding.find enc
+      rescue ArgumentError
+        Encoding::BINARY
+      end
+
+      REENCODE_DUMMY_ENCODINGS = {
+        # ISO-2022-JP is a legacy but still widely used encoding in Japan
+        # Here we convert ISO-2022-JP to UTF-8 so that it can be handled.
+        Encoding::ISO_2022_JP => true
+
+        # Other dummy encodings are rarely used and have not been supported yet.
+        # Adding support for them will require careful considerations.
+      }
+
+      def handle_dummy_encoding(name, body)
+        # A string object with a 'dummy' encoding does not have full functionality and can cause errors.
+        # So here we covert it to UTF-8 so that it can be handled properly.
+        if name.encoding.dummy? && REENCODE_DUMMY_ENCODINGS[name.encoding]
+          name = name.encode(Encoding::UTF_8)
+          body = body.encode(Encoding::UTF_8)
+        end
+        return name, body
+      end
+
       def handle_empty_content!(content)
         if content.nil? || content.empty?
           raise EmptyContentError

data/lib/rack/multipart/uploaded_file.rb

@@ -5,14 +5,47 @@ require 'fileutils'
 
 module Rack
   module Multipart
+    # Despite the misleading name, UploadedFile is designed for use for
+    # preparing multipart file upload bodies, generally for use in tests.
+    # It is not designed for and should not be used for handling uploaded
+    # files (there is no need for that, since Rack's multipart parser
+    # already creates Tempfiles for that). Using this with non-trusted
+    # filenames can create a security vulnerability.
+    #
+    # You should only use this class if you plan on passing the instances
+    # to Rack::MockRequest for use in creating multipart request bodies.
+    #
+    # UploadedFile delegates most methods to the tempfile it contains.
     class UploadedFile
-
-      # The filename, *not* including the path, of the "uploaded" file
+      # The provided name of the file. This generally is the basename of
+      # path provided during initialization, but it can contain slashes if they
+      # were present in the filename argument when the instance was created.
       attr_reader :original_filename
 
-      # The content type of the "uploaded" file
+      # The content type of the instance.
       attr_accessor :content_type
 
+      # Create a new UploadedFile.  For backwards compatibility, this accepts
+      # both positional and keyword versions of the same arguments:
+      #
+      # filepath/path :: The path to the file
+      # ct/content_type :: The content_type of the file
+      # bin/binary :: Whether to set binmode on the file before copying data into it.
+      #
+      # If both positional and keyword arguments are present, the keyword arguments
+      # take precedence.
+      #
+      # The following keyword-only arguments are also accepted:
+      #
+      # filename :: Override the filename to use for the file.  This is so the
+      #             filename for the upload does not need to match the basename of
+      #             the file path.  This should not contain slashes, unless you are
+      #             trying to test how an application handles invalid filenames in
+      #             multipart upload bodies.
+      # io :: Use the given IO-like instance as the tempfile, instead of creating
+      #       a Tempfile instance.  This is useful for building multipart file
+      #       upload bodies without a file being present on the filesystem. If you are
+      #       providing this, you should also provide the filename argument.
       def initialize(filepath = nil, ct = "text/plain", bin = false,
                      path: filepath, content_type: ct, binary: bin, filename: nil, io: nil)
         if io
@@ -28,15 +61,19 @@ module Rack
         @content_type = content_type
       end
 
+      # The path of the tempfile for the instance, if the tempfile has a path.
+      # nil if the tempfile does not have a path.
       def path
         @tempfile.path if @tempfile.respond_to?(:path)
       end
       alias_method :local_path, :path
 
-      def respond_to?(*args)
-        super or @tempfile.respond_to?(*args)
+      # Return true if the tempfile responds to the method.
+      def respond_to_missing?(*args)
+        @tempfile.respond_to?(*args)
       end
 
+      # Delegate method missing calls to the tempfile.
       def method_missing(method_name, *args, &block) #:nodoc:
         @tempfile.__send__(method_name, *args, &block)
       end

data/lib/rack/multipart.rb

@@ -6,6 +6,8 @@ require_relative 'utils'
 require_relative 'multipart/parser'
 require_relative 'multipart/generator'
 
+require_relative 'bad_request'
+
 module Rack
   # A multipart form data parser, adapted from IOWA.
   #
@@ -13,9 +15,40 @@ module Rack
   module Multipart
     MULTIPART_BOUNDARY = "AaB03x"
 
+    class MissingInputError < StandardError
+      include BadRequest
+    end
+
+    # Accumulator for multipart form data, conforming to the QueryParser API.
+    # In future, the Parser could return the pair list directly, but that would
+    # change its API.
+    class ParamList # :nodoc:
+      def self.make_params
+        new
+      end
+
+      def self.normalize_params(params, key, value)
+        params << [key, value]
+      end
+
+      def initialize
+        @pairs = []
+      end
+
+      def <<(pair)
+        @pairs << pair
+      end
+
+      def to_params_hash
+        @pairs
+      end
+    end
+
     class << self
       def parse_multipart(env, params = Rack::Utils.default_query_parser)
-        io = env[RACK_INPUT]
+        unless io = env[RACK_INPUT]
+          raise MissingInputError, "Missing input stream!"
+        end
 
         if content_length = env['CONTENT_LENGTH']
           content_length = content_length.to_i