rack-mail_exception 0.0.1

data/vendor/mail/spec/mail/body_spec.rb

@@ -0,0 +1,385 @@
+# encoding: utf-8
+require 'spec_helper'
+
+describe Mail::Body do
+
+  # 3.5 Overall message syntax
+  #
+  # A message consists of header fields, optionally followed by a message
+  # body.  Lines in a message MUST be a maximum of 998 characters
+  # excluding the CRLF, but it is RECOMMENDED that lines be limited to 78
+  # characters excluding the CRLF.  (See section 2.1.1 for explanation.)
+  # In a message body, though all of the characters listed in the text
+  # rule MAY be used, the use of US-ASCII control characters (values 1
+  # through 8, 11, 12, and 14 through 31) is discouraged since their
+  # interpretation by receivers for display is not guaranteed.
+  #
+  #  message         =       (fields / obs-fields)
+  #                          [CRLF body]
+  #
+  #  body            =       *(*998text CRLF) *998text
+  #
+  # The header fields carry most of the semantic information and are
+  # defined in section 3.6.  The body is simply a series of lines of text
+  # which are uninterpreted for the purposes of this standard.
+  #
+  describe "initialization" do
+    
+    it "should be instantiated" do
+      doing { Mail::Body.new }.should_not raise_error
+    end
+    
+    it "should initialize on a nil value" do
+      doing { Mail::Body.new(nil) }.should_not raise_error
+    end
+    
+    it "should accept text as raw source data" do
+      body = Mail::Body.new('this is some text')
+      body.to_s.should == 'this is some text'
+    end
+    
+    it "should accept nil as a value and return an empty body" do
+      body = Mail::Body.new
+      body.to_s.should == ''
+    end
+
+    it "should accept an array as the body and join it" do
+      doing { Mail::Body.new(["line one\n", "line two\n"]) }.should_not raise_error
+    end
+
+    it "should accept an array as the body and join it" do
+      body = Mail::Body.new(["line one\n", "line two\n"])
+      body.encoded.should == "line one\r\nline two\r\n"
+    end
+
+  end
+
+  describe "encoding" do
+
+    it "should accept text as raw source data" do
+      body = Mail::Body.new('this is some text')
+      body.encoded.should == 'this is some text'
+    end
+    
+    it "should set it's own encoding to us_ascii if it is ascii only body" do
+      body = Mail::Body.new('This is some text')
+      body.charset.should == 'US-ASCII'
+    end
+    
+    it "should allow you to set it's encoding" do
+      body = Mail::Body.new('')
+      body.charset = 'UTF-8'
+      body.charset.should == 'UTF-8'
+    end
+
+    it "should allow you to specify an encoding" do
+      body = Mail::Body.new('')
+      body.encoding = 'base64'
+      body.encoding.should == 'base64'
+    end
+    
+    it "should convert all new lines to crlf" do
+      body = Mail::Body.new("This has \n various \r new \r\n lines")
+      body.encoded.should == "This has \r\n various \r\n new \r\n lines"
+    end
+
+  end
+
+  describe "decoding" do
+    
+    it "should convert all new lines to crlf" do
+      body = Mail::Body.new("This has \n various \r new \r\n lines")
+      body.decoded.should == "This has \n various \n new \n lines"
+    end
+    
+    it "should not change a body on decode if not given an encoding type to decode" do
+      body = Mail::Body.new("The=3Dbody")
+      body.decoded.should == "The=3Dbody"
+    end
+
+    it "should change return the raw text if it does not recognise the encoding" do
+      body = Mail::Body.new("The=3Dbody")
+      body.encoding = '7bit'
+      body.decoded.should == "The=3Dbody"
+    end
+
+    it "should change a body on decode if given an encoding type to decode" do
+      body = Mail::Body.new("The=3Dbody")
+      body.encoding = 'quoted-printable'
+      body.decoded.should == "The=body"
+    end
+
+    it "should change a body on decode if given an encoding type to decode" do
+      body = Mail::Body.new("VGhlIGJvZHk=\n")
+      body.encoding = 'base64'
+      body.decoded.should == "The body"
+    end
+
+  end
+
+  describe "splitting up a multipart document" do
+    
+    it "should store the boundary passed in" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.boundary.should == '----=_Part_2192_32400445'
+    end
+
+    it "should split at the boundry string given returning two message bodies" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445').parts.length.should == 2
+    end
+
+    it "should keep the preamble text as it's own preamble" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.preamble.should == "this is some text"
+    end
+    
+    it "should return the parts as their own messages" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.parts[0].class.should == Mail::Part
+      body.parts[1].class.should == Mail::Part
+    end
+    
+    it "should return the first part as it's own message" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.parts[0].content_type.should == "text/plain; charset=ISO-8859-1"
+    end
+    
+    it "should return the first part as it's own message" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.parts[1].content_type.should == "text/html"
+    end
+
+    it "should separate out it's parts" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.should be_multipart
+    end
+
+    it "should keep track of it's parts" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.parts.length.should == 2
+    end
+
+    it "should round trip it's parts" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.preamble = "Really! this is some text"
+      body.epilogue = "And this is the end"
+      new_body = Mail::Body.new(body.encoded)
+      new_body.split!('----=_Part_2192_32400445')
+      new_body.parts.length.should == 2
+      new_body.preamble.should == "Really! this is some text"
+      new_body.epilogue.should == "And this is the end"
+    end
+
+    it "should allow you to change the boundary" do
+      multipart_body = "this is some text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/plain; charset=ISO-8859-1\r\n\r\nThis is a plain text\r\n\r\n------=_Part_2192_32400445\r\nContent-Type: text/html\r\n\r\n<p>This is HTML</p>\r\nn------=_Part_2192_32400445--\r\n"
+      body = Mail::Body.new(multipart_body)
+      body.split!('----=_Part_2192_32400445')
+      body.boundary = '------=_MIMEPART'
+      new_body = Mail::Body.new(body.encoded)
+      new_body.split!('------=_MIMEPART')
+      new_body.parts.length.should == 2
+      new_body.preamble.should == "this is some text"
+    end
+
+  end
+
+  describe "detecting non ascii" do
+    it "should say an empty string is all ascii" do
+      body = Mail::Body.new
+      body.should be_only_us_ascii
+    end
+
+    it "should say if a body is ascii" do
+      body = Mail::Body.new('This is ASCII')
+      body.should be_only_us_ascii
+    end
+
+    it "should say if a body is not ascii" do
+      body = Mail::Body.new("This is NOT plain text ASCII　− かきくけこ")
+      body.should_not be_only_us_ascii
+    end
+  end
+
+  describe "adding parts" do
+    it "should allow you to add a part" do
+      body = Mail::Body.new('')
+      body << Mail::Part.new('')
+      body.parts.length.should == 1
+      body.should be_multipart
+    end
+    
+    it "should allow you to sort the parts" do
+      body = Mail::Body.new('')
+      body << Mail::Part.new("content-type: text/html\r\nsubject: HTML")
+      body << Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text")
+      body << Mail::Part.new("content-type: text/enriched\r\nsubject: Enriched")
+      body.parts.length.should == 3
+      body.should be_multipart
+      body.sort_parts!
+      body.parts[0].content_type.should == "text/plain"
+      body.parts[1].content_type.should == "text/enriched"
+      body.parts[2].content_type.should == "text/html"
+    end
+    
+    it "should allow you to sort the parts with an arbitrary sort order" do
+      body = Mail::Body.new('')
+      body.set_sort_order([ "text/plain", "text/html", "text/enriched" ])
+      body << Mail::Part.new("content-type: text/html\r\nsubject: HTML")
+      body << Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text")
+      body << Mail::Part.new("content-type: text/enriched\r\nsubject: Enriched")
+      body.parts.length.should == 3
+      body.should be_multipart
+      body.sort_parts!
+      body.parts[0].content_type.should == "text/plain"
+      body.parts[1].content_type.should == "text/html"
+      body.parts[2].content_type.should == "text/enriched"
+    end
+    
+    it "should allow you to sort the parts with an arbitrary sort order" do
+      body = Mail::Body.new('')
+      body.set_sort_order(["application/x-yaml", "text/plain"])
+      body << Mail::Part.new("content-type: text/plain\r\nsubject: HTML")
+      body << Mail::Part.new("content-type: text/html\r\nsubject: Plain Text")
+      body << Mail::Part.new("content-type: application/x-yaml\r\nsubject: Enriched")
+      body.parts.length.should == 3
+      body.should be_multipart
+      body.sort_parts!
+      body.parts[0].content_type.should == "application/x-yaml"
+      body.parts[1].content_type.should == "text/plain"
+      body.parts[2].content_type.should == "text/html"
+    end
+    
+    it "should sort the parts on encode" do
+      body = Mail::Body.new('')
+      body << Mail::Part.new("content-type: text/html\r\nsubject: HTML")
+      body << Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text")
+      body << Mail::Part.new("content-type: text/enriched\r\nsubject: Enriched")
+      body.parts.length.should == 3
+      body.should be_multipart
+      body.encoded
+      body.parts[0].content_type.should == "text/plain"
+      body.parts[1].content_type.should == "text/enriched"
+      body.parts[2].content_type.should == "text/html"
+    end
+    
+    it "should put the part types it doesn't know about at the end" do
+      body = Mail::Body.new('')
+      body << Mail::Part.new("content-type: text/html\r\nsubject: HTML")
+      body << Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text")
+      body << Mail::Part.new("content-type: image/jpeg\r\n")
+      body.parts.length.should == 3
+      body.should be_multipart
+      body.encoded
+      body.parts[0].content_type.should == "text/plain"
+      body.parts[1].content_type.should == "text/html"
+      body.parts[2].content_type.should == "image/jpeg"
+    end
+    
+    it "should allow you to sort the parts recursively" do
+      part = Mail::Part.new('Content-Type: multipart/alternate')
+      part.add_part(Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text"))
+      part.add_part(Mail::Part.new("content-type: text/html\r\nsubject: HTML"))
+      part.add_part(Mail::Part.new("content-type: text/enriched\r\nsubject: Enriched"))
+      body = Mail::Body.new('')
+      body << part
+      body << Mail::Part.new("content-type: image/jpeg\r\nsubject: JPGEG\r\n\r\nsdkjskjdksjdkjsd")
+      body.parts.length.should == 2
+      body.should be_multipart
+      body.sort_parts!
+      body.parts[0].content_type.should match %r{\Amultipart/alternate(;|\Z)} 
+      body.parts[1].content_type.should == "image/jpeg"
+      body.parts[0].parts[0].content_type.should == "text/plain"
+      body.parts[0].parts[1].content_type.should == "text/enriched"
+      body.parts[0].parts[2].content_type.should == "text/html"
+    end
+    
+    it "should allow you to sort the parts recursively" do
+      part = Mail::Part.new('Content-Type: multipart/alternate')
+      part.add_part(Mail::Part.new("content-type: text/enriched\r\nsubject: Enriched"))
+      part.add_part(Mail::Part.new("content-type: text/plain\r\nsubject: Plain Text"))
+      part.add_part(Mail::Part.new("content-type: text/html\r\nsubject: HTML"))
+      body = Mail::Body.new('')
+      body << part
+      body << Mail::Part.new("content-type: image/jpeg\r\nsubject: JPGEG\r\n\r\nsdkjskjdksjdkjsd")
+      body.parts.length.should == 2
+      body.should be_multipart
+      body.sort_parts!
+      body.parts[0].content_type.should match %r{\Amultipart/alternate(;|\Z)} 
+      body.parts[1].content_type.should == "image/jpeg"
+      body.parts[0].parts[0].content_type.should == "text/plain"
+      body.parts[0].parts[1].content_type.should == "text/enriched"
+      body.parts[0].parts[2].content_type.should == "text/html"
+    end
+    
+  end
+
+  describe "matching" do
+
+    it "should still equal itself" do
+      body = Mail::Body.new('The body')
+      body.should == body
+    end
+
+    it "should match on the body part decoded if given a string to ==" do
+      body = Mail::Body.new('The body')
+      (body == 'The body').should be_true
+    end
+
+    it "should match on the body part decoded if given a string to ==" do
+      body = Mail::Body.new("VGhlIGJvZHk=\n")
+      body.encoding = 'base64'
+      (body == "The body").should be_true
+    end
+
+    it "should match on the body part decoded if given a string to =~" do
+      body = Mail::Body.new('The body')
+      (body =~ /The/).should == 0
+    end
+
+    it "should match on the body part decoded if given a string to ==" do
+      body = Mail::Body.new("VGhlIGJvZHk=\n")
+      body.encoding = 'base64'
+      (body =~ /The/).should == 0
+    end
+
+    it "should match on the body part decoded if given a string to match" do
+      body = Mail::Body.new('The body')
+      (body.match(/The/))[0].should == 'The'
+    end
+
+    it "should match on the body part decoded if given a string to match" do
+      body = Mail::Body.new("VGhlIGJvZHk=\n")
+      body.encoding = 'base64'
+      (body.match(/The/))[0].should == 'The'
+    end
+    
+    it "should match on the body part decoded if given a string to include?" do
+      body = Mail::Body.new('The Body')
+      body.should include('The')
+    end
+    
+    it "should match on the body part decoded if given a string to include?" do
+      body = Mail::Body.new("VGhlIGJvZHk=\n")
+      body.encoding = 'base64'
+      body.should include('The')
+    end
+  end
+end

data/vendor/mail/spec/mail/configuration_spec.rb

@@ -0,0 +1,19 @@
+require 'spec_helper'
+
+describe Mail::Configuration do
+
+  describe "network configurations" do
+    
+    it "should be available from the Mail.defaults method" do
+      Mail.defaults { delivery_method :smtp, { :address => 'some.host' } }
+      Mail.delivery_method.settings[:address].should == 'some.host'
+    end
+
+    it "should configure sendmail" do
+      Mail.defaults { delivery_method :sendmail, :location => "/usr/bin/sendmail" }
+      Mail.delivery_method.class.should == Mail::Sendmail
+      Mail.delivery_method.settings[:location].should == "/usr/bin/sendmail"
+    end
+    
+  end
+end

data/vendor/mail/spec/mail/core_extensions/string_spec.rb

@@ -0,0 +1,62 @@
+require File.dirname(__FILE__) + '/../../spec_helper'
+
+describe 'core_extensions/string' do
+  
+  describe "to_crlf" do
+    
+    it "should change a single LF to CRLF" do
+      "\n".to_crlf.should == "\r\n"
+    end
+    
+    it "should change multiple LF to CRLF" do
+      "\n\n".to_crlf.should == "\r\n\r\n"
+    end
+    
+    it "should change a single CR to CRLF" do
+      "\r".to_crlf.should == "\r\n"
+    end
+    
+    it "should not change CRLF" do
+      "\r\n".to_crlf.should == "\r\n"
+    end
+    
+    it "should not change multiple CRLF" do
+      "\r\n\r\n".to_crlf.should == "\r\n\r\n"
+    end
+    
+    it "should handle a mix" do
+      "\r \n\r\n".to_crlf.should == "\r\n \r\n\r\n"
+    end
+  end
+  
+  describe "to_lf" do
+    it "should change a single CR to LF" do
+      "\r".to_lf.should == "\n"
+    end
+    
+    it "should change multiple LF to CRLF" do
+      "\r\r".to_lf.should == "\n\n"
+    end
+    
+    it "should change a single CRLF to LF" do
+      "\r\n".to_lf.should == "\n"
+    end
+    
+    it "should change multiple CR to LF" do
+      "\r\n\r\n".to_lf.should == "\n\n"
+    end
+    
+    it "should not change LF" do
+      "\n".to_lf.should == "\n"
+    end
+    
+    it "should not change multiple CRLF" do
+      "\n\n".to_lf.should == "\n\n"
+    end
+    
+    it "should handle a mix" do
+      "\r \n\r\n".to_lf.should == "\n \n\n"
+    end
+  end
+
+end