rabl 0.13.1 → 0.14.4

data/fixtures/rails5/config/environments/development.rb

@@ -1,54 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports.
-  config.consider_all_requests_local = true
-
-  # Enable/disable caching. By default caching is disabled.
-  if Rails.root.join('tmp/caching-dev.txt').exist?
-    config.action_controller.perform_caching = true
-
-    config.cache_store = :memory_store
-    config.public_file_server.headers = {
-      'Cache-Control' => 'public, max-age=172800'
-    }
-  else
-    config.action_controller.perform_caching = false
-
-    config.cache_store = :null_store
-  end
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  config.action_mailer.perform_caching = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Suppress logger output for asset requests.
-  config.assets.quiet = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # Use an evented file watcher to asynchronously detect changes in source code,
-  # routes, locales, etc. This feature depends on the listen gem.
-  config.file_watcher = ActiveSupport::EventedFileUpdateChecker
-end

data/fixtures/rails5/config/environments/production.rb

@@ -1,86 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Mount Action Cable outside main process or domain
-  # config.action_cable.mount_path = nil
-  # config.action_cable.url = 'wss://example.com/cable'
-  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  config.log_tags = [ :request_id ]
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Use a real queuing backend for Active Job (and separate queues per environment)
-  # config.active_job.queue_adapter     = :resque
-  # config.active_job.queue_name_prefix = "rails5_#{Rails.env}"
-  config.action_mailer.perform_caching = false
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new(STDOUT)
-    logger.formatter = config.log_formatter
-    config.logger = ActiveSupport::TaggedLogging.new(logger)
-  end
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/fixtures/rails5/config/environments/test.rb

@@ -1,42 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure public file server for tests with Cache-Control for performance.
-  config.public_file_server.enabled = true
-  config.public_file_server.headers = {
-    'Cache-Control' => 'public, max-age=3600'
-  }
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-  config.action_mailer.perform_caching = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/fixtures/rails5/config/initializers/application_controller_renderer.rb

@@ -1,6 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# ApplicationController.renderer.defaults.merge!(
-#   http_host: 'example.org',
-#   https: false
-# )

data/fixtures/rails5/config/initializers/assets.rb

@@ -1,11 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Add additional assets to the asset load path
-# Rails.application.config.assets.paths << Emoji.images_path
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/fixtures/rails5/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/fixtures/rails5/config/initializers/cookies_serializer.rb

@@ -1,5 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Specify a serializer for the signed and encrypted cookie jars.
-# Valid options are :json, :marshal, and :hybrid.
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/fixtures/rails5/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/fixtures/rails5/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/fixtures/rails5/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/fixtures/rails5/config/initializers/new_framework_defaults.rb

@@ -1,24 +0,0 @@
-# Be sure to restart your server when you modify this file.
-#
-# This file contains migration options to ease your Rails 5.0 upgrade.
-#
-# Read the Rails 5.0 release notes for more info on each option.
-
-# Enable per-form CSRF tokens. Previous versions had false.
-Rails.application.config.action_controller.per_form_csrf_tokens = true
-
-# Enable origin-checking CSRF mitigation. Previous versions had false.
-Rails.application.config.action_controller.forgery_protection_origin_check = true
-
-# Make Ruby 2.4 preserve the timezone of the receiver when calling `to_time`.
-# Previous versions had false.
-ActiveSupport.to_time_preserves_timezone = true
-
-# Require `belongs_to` associations by default. Previous versions had false.
-Rails.application.config.active_record.belongs_to_required_by_default = true
-
-# Do not halt callback chains when a callback returns false. Previous versions had true.
-ActiveSupport.halt_callback_chains_on_return_false = false
-
-# Configure SSL options to enable HSTS with subdomains. Previous versions had false.
-Rails.application.config.ssl_options = { hsts: { subdomains: true } }

data/fixtures/rails5/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_rails5_session'

data/fixtures/rails5/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json]
-end
-
-# To enable root element in JSON for ActiveRecord objects.
-# ActiveSupport.on_load(:active_record) do
-#   self.include_root_in_json = true
-# end

data/fixtures/rails5/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/fixtures/rails5/config/puma.rb

@@ -1,47 +0,0 @@
-# Puma can serve each request in a thread from an internal thread pool.
-# The `threads` method setting takes two numbers a minimum and maximum.
-# Any libraries that use thread pools should be configured to match
-# the maximum value specified for Puma. Default is set to 5 threads for minimum
-# and maximum, this matches the default thread size of Active Record.
-#
-threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }.to_i
-threads threads_count, threads_count
-
-# Specifies the `port` that Puma will listen on to receive requests, default is 3000.
-#
-port        ENV.fetch("PORT") { 3000 }
-
-# Specifies the `environment` that Puma will run in.
-#
-environment ENV.fetch("RAILS_ENV") { "development" }
-
-# Specifies the number of `workers` to boot in clustered mode.
-# Workers are forked webserver processes. If using threads and workers together
-# the concurrency of the application would be max `threads` * `workers`.
-# Workers do not work on JRuby or Windows (both of which do not support
-# processes).
-#
-# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
-
-# Use the `preload_app!` method when specifying a `workers` number.
-# This directive tells Puma to first boot the application and load code
-# before forking the application. This takes advantage of Copy On Write
-# process behavior so workers use less memory. If you use this option
-# you need to make sure to reconnect any threads in the `on_worker_boot`
-# block.
-#
-# preload_app!
-
-# The code in the `on_worker_boot` will be called if you are using
-# clustered mode by specifying a number of `workers`. After each worker
-# process is booted this block will be run, if you are using `preload_app!`
-# option you will want to use this block to reconnect to any threads
-# or connections that may have been created at application boot, Ruby
-# cannot share connections between processes.
-#
-# on_worker_boot do
-#   ActiveRecord::Base.establish_connection if defined?(ActiveRecord)
-# end
-
-# Allow puma to be restarted by `rails restart` command.
-plugin :tmp_restart

data/fixtures/rails5/config/routes.rb

@@ -1,8 +0,0 @@
-Rails.application.routes.draw do
-  resources :users
-  resources :posts do
-    member do
-      get 'renderer'
-    end
-  end
-end

data/fixtures/rails5/config/secrets.yml

@@ -1,22 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rails secret` to generate a secure secret key.
-
-# Make sure the secrets in this file are kept private
-# if you're sharing your code publicly.
-
-development:
-  secret_key_base: 30ff78db787c4ed0bb6cd6c12108dadd9adc955263a563ad43a0d1308aa03b1a541b96bdd09f4461c7c4d75e14f54df506f4bb0dac9ca45c4ef95f133e031185
-
-test:
-  secret_key_base: 6bca541a67e4fec74dbdf0f83055ca79b2bc628240957763dd0f5cf3dd191736bf1e04bcd2a545a5bc6a2902a0643c88de0fb88ddf4c5d56cb877f2557074d79
-
-# Do not keep production secrets in the repository,
-# instead read values from the environment.
-production:
-  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/fixtures/rails5/config/spring.rb

@@ -1,6 +0,0 @@
-%w(
-  .ruby-version
-  .rbenv-vars
-  tmp/restart.txt
-  tmp/caching-dev.txt
-).each { |path| Spring.watch(path) }

data/fixtures/rails5/db/migrate

@@ -1 +0,0 @@
-fixtures/rails5/db/../../ashared/migrate

data/fixtures/rails5/db/schema.rb

@@ -1,41 +0,0 @@
-# This file is auto-generated from the current state of the database. Instead
-# of editing this file, please use the migrations feature of Active Record to
-# incrementally modify your database, and then regenerate this schema definition.
-#
-# Note that this schema.rb definition is the authoritative source for your
-# database schema. If you need to create the application database on another
-# system, you should be using db:schema:load, not running all the migrations
-# from scratch. The latter is a flawed and unsustainable approach (the more migrations
-# you'll amass, the slower it'll run and the greater likelihood for issues).
-#
-# It's strongly recommended that you check this file into your version control system.
-
-ActiveRecord::Schema.define(version: 20111002092024) do
-
-  create_table "phone_numbers", force: :cascade do |t|
-    t.integer "user_id"
-    t.boolean "is_primary"
-    t.string  "area_code"
-    t.string  "prefix"
-    t.string  "suffix"
-    t.string  "name"
-  end
-
-  create_table "posts", force: :cascade do |t|
-    t.integer  "user_id"
-    t.string   "title"
-    t.text     "body"
-    t.datetime "created_at"
-    t.datetime "updated_at"
-  end
-
-  create_table "users", force: :cascade do |t|
-    t.string   "username"
-    t.string   "email"
-    t.string   "location"
-    t.boolean  "is_admin"
-    t.datetime "created_at"
-    t.datetime "updated_at"
-  end
-
-end