qiita_org 0.1.31 → 0.1.37

data/.bandle/ruby/2.7.0/gems/rspec-core-3.9.2/lib/rspec/core/formatters/snippet_extractor.rb

@@ -1,134 +0,0 @@
-module RSpec
-  module Core
-    module Formatters
-      # @private
-      class SnippetExtractor
-        NoSuchFileError = Class.new(StandardError)
-        NoSuchLineError = Class.new(StandardError)
-
-        def self.extract_line_at(file_path, line_number)
-          source = source_from_file(file_path)
-          line = source.lines[line_number - 1]
-          raise NoSuchLineError unless line
-          line
-        end
-
-        def self.source_from_file(path)
-          raise NoSuchFileError unless File.exist?(path)
-          RSpec.world.source_from_file(path)
-        end
-
-        if RSpec::Support::RubyFeatures.ripper_supported?
-          NoExpressionAtLineError = Class.new(StandardError)
-
-          attr_reader :source, :beginning_line_number, :max_line_count
-
-          def self.extract_expression_lines_at(file_path, beginning_line_number, max_line_count=nil)
-            if max_line_count == 1
-              [extract_line_at(file_path, beginning_line_number)]
-            else
-              source = source_from_file(file_path)
-              new(source, beginning_line_number, max_line_count).expression_lines
-            end
-          end
-
-          def initialize(source, beginning_line_number, max_line_count=nil)
-            @source = source
-            @beginning_line_number = beginning_line_number
-            @max_line_count = max_line_count
-          end
-
-          def expression_lines
-            line_range = line_range_of_expression
-
-            if max_line_count && line_range.count > max_line_count
-              line_range = (line_range.begin)..(line_range.begin + max_line_count - 1)
-            end
-
-            source.lines[(line_range.begin - 1)..(line_range.end - 1)]
-          rescue SyntaxError, NoExpressionAtLineError
-            [self.class.extract_line_at(source.path, beginning_line_number)]
-          end
-
-          private
-
-          def line_range_of_expression
-            @line_range_of_expression ||= begin
-              line_range = line_range_of_location_nodes_in_expression
-              initial_unclosed_tokens = unclosed_tokens_in_line_range(line_range)
-              unclosed_tokens = initial_unclosed_tokens
-
-              until (initial_unclosed_tokens & unclosed_tokens).empty?
-                line_range = (line_range.begin)..(line_range.end + 1)
-                unclosed_tokens = unclosed_tokens_in_line_range(line_range)
-              end
-
-              line_range
-            end
-          end
-
-          def unclosed_tokens_in_line_range(line_range)
-            tokens = FlatMap.flat_map(line_range) do |line_number|
-              source.tokens_by_line_number[line_number]
-            end
-
-            tokens.each_with_object([]) do |token, unclosed_tokens|
-              if token.opening?
-                unclosed_tokens << token
-              else
-                index = unclosed_tokens.rindex do |unclosed_token|
-                  unclosed_token.closed_by?(token)
-                end
-                unclosed_tokens.delete_at(index) if index
-              end
-            end
-          end
-
-          def line_range_of_location_nodes_in_expression
-            line_numbers = expression_node.each_with_object(Set.new) do |node, set|
-              set << node.location.line if node.location
-            end
-
-            line_numbers.min..line_numbers.max
-          end
-
-          def expression_node
-            raise NoExpressionAtLineError if location_nodes_at_beginning_line.empty?
-
-            @expression_node ||= begin
-              common_ancestor_nodes = location_nodes_at_beginning_line.map do |node|
-                node.each_ancestor.to_a
-              end.reduce(:&)
-
-              common_ancestor_nodes.find { |node| expression_outmost_node?(node) }
-            end
-          end
-
-          def expression_outmost_node?(node)
-            return true unless node.parent
-            return false if node.type.to_s.start_with?('@')
-            ![node, node.parent].all? do |n|
-              # See `Ripper::PARSER_EVENTS` for the complete list of sexp types.
-              type = n.type.to_s
-              type.end_with?('call') || type.start_with?('method_add_')
-            end
-          end
-
-          def location_nodes_at_beginning_line
-            source.nodes_by_line_number[beginning_line_number]
-          end
-        else
-          # :nocov:
-          def self.extract_expression_lines_at(file_path, beginning_line_number, *)
-            [extract_line_at(file_path, beginning_line_number)]
-          end
-          # :nocov:
-        end
-
-        def self.least_indentation_from(lines)
-          lines.map { |line| line[/^[ \t]*/] }.min
-        end
-      end
-    end
-  end
-end

data/.bandle/ruby/2.7.0/gems/rspec-core-3.9.2/lib/rspec/core/formatters/syntax_highlighter.rb

@@ -1,91 +0,0 @@
-module RSpec
-  module Core
-    module Formatters
-      # @private
-      # Provides terminal syntax highlighting of code snippets
-      # when coderay is available.
-      class SyntaxHighlighter
-        def initialize(configuration)
-          @configuration = configuration
-        end
-
-        def highlight(lines)
-          implementation.highlight_syntax(lines)
-        end
-
-        # rubocop:disable Lint/RescueException
-        # rubocop:disable Lint/HandleExceptions
-        def self.attempt_to_add_rspec_terms_to_coderay_keywords
-          CodeRay::Scanners::Ruby::Patterns::IDENT_KIND.add(%w[
-            describe context
-            it specify
-            before after around
-            let subject
-            expect allow
-          ], :keyword)
-        rescue Exception
-          # Mutating CodeRay's contants like this is not a public API
-          # and might not always work. If we cannot add our keywords
-          # to CodeRay it is not a big deal and not worth raising an
-          # error over, so we ignore it.
-        end
-      # rubocop:enable Lint/HandleExceptions
-      # rubocop:enable Lint/RescueException
-
-      private
-
-        if RSpec::Support::OS.windows?
-          # :nocov:
-          def implementation
-            WindowsImplementation
-          end
-          # :nocov:
-        else
-          def implementation
-            return color_enabled_implementation if @configuration.color_enabled?
-            NoSyntaxHighlightingImplementation
-          end
-        end
-
-        def color_enabled_implementation
-          @color_enabled_implementation ||= begin
-            require 'coderay'
-            self.class.attempt_to_add_rspec_terms_to_coderay_keywords
-            CodeRayImplementation
-          rescue LoadError
-            NoSyntaxHighlightingImplementation
-          end
-        end
-
-        # @private
-        module CodeRayImplementation
-          RESET_CODE = "\e[0m"
-
-          def self.highlight_syntax(lines)
-            highlighted = begin
-              CodeRay.encode(lines.join("\n"), :ruby, :terminal)
-            rescue Support::AllExceptionsExceptOnesWeMustNotRescue
-              return lines
-            end
-
-            highlighted.split("\n").map do |line|
-              line.sub(/\S/) { |char| char.insert(0, RESET_CODE) }
-            end
-          end
-        end
-
-        # @private
-        module NoSyntaxHighlightingImplementation
-          def self.highlight_syntax(lines)
-            lines
-          end
-        end
-
-        # @private
-        # Not sure why, but our code above (and/or coderay itself) does not work
-        # on Windows, so we disable the feature on Windows.
-        WindowsImplementation = NoSyntaxHighlightingImplementation
-      end
-    end
-  end
-end

data/.bandle/ruby/2.7.0/gems/rspec-core-3.9.2/lib/rspec/core/hooks.rb

@@ -1,641 +0,0 @@
-module RSpec
-  module Core
-    # Provides `before`, `after` and `around` hooks as a means of
-    # supporting common setup and teardown. This module is extended
-    # onto {ExampleGroup}, making the methods available from any `describe`
-    # or `context` block and included in {Configuration}, making them
-    # available off of the configuration object to define global setup
-    # or teardown logic.
-    module Hooks
-      # @api public
-      #
-      # @overload before(&block)
-      # @overload before(scope, &block)
-      #   @param scope [Symbol] `:example`, `:context`, or `:suite`
-      #     (defaults to `:example`)
-      # @overload before(scope, *conditions, &block)
-      #   @param scope [Symbol] `:example`, `:context`, or `:suite`
-      #     (defaults to `:example`)
-      #   @param conditions [Array<Symbol>, Hash] constrains this hook to
-      #     examples matching these conditions e.g.
-      #     `before(:example, :ui => true) { ... }` will only run with examples
-      #     or groups declared with `:ui => true`. Symbols will be transformed
-      #     into hash entries with `true` values.
-      # @overload before(conditions, &block)
-      #   @param conditions [Hash]
-      #     constrains this hook to examples matching these conditions e.g.
-      #     `before(:example, :ui => true) { ... }` will only run with examples
-      #     or groups declared with `:ui => true`.
-      #
-      # @see #after
-      # @see #around
-      # @see ExampleGroup
-      # @see SharedContext
-      # @see SharedExampleGroup
-      # @see Configuration
-      #
-      # Declare a block of code to be run before each example (using `:example`)
-      # or once before any example (using `:context`). These are usually
-      # declared directly in the {ExampleGroup} to which they apply, but they
-      # can also be shared across multiple groups.
-      #
-      # You can also use `before(:suite)` to run a block of code before any
-      # example groups are run. This should be declared in {RSpec.configure}.
-      #
-      # Instance variables declared in `before(:example)` or `before(:context)`
-      # are accessible within each example.
-      #
-      # ### Order
-      #
-      # `before` hooks are stored in three scopes, which are run in order:
-      # `:suite`, `:context`, and `:example`. They can also be declared in
-      # several different places: `RSpec.configure`, a parent group, the current
-      # group. They are run in the following order:
-      #
-      #     before(:suite)    # Declared in RSpec.configure.
-      #     before(:context)  # Declared in RSpec.configure.
-      #     before(:context)  # Declared in a parent group.
-      #     before(:context)  # Declared in the current group.
-      #     before(:example)  # Declared in RSpec.configure.
-      #     before(:example)  # Declared in a parent group.
-      #     before(:example)  # Declared in the current group.
-      #
-      # If more than one `before` is declared within any one scope, they are run
-      # in the order in which they are declared. Any `around` hooks will execute
-      # later than any `before` hook regardless of scope.
-      #
-      # ### Conditions
-      #
-      # When you add a conditions hash to `before(:example)` or
-      # `before(:context)`, RSpec will only apply that hook to groups or
-      # examples that match the conditions. e.g.
-      #
-      #     RSpec.configure do |config|
-      #       config.before(:example, :authorized => true) do
-      #         log_in_as :authorized_user
-      #       end
-      #     end
-      #
-      #     RSpec.describe Something, :authorized => true do
-      #       # The before hook will run in before each example in this group.
-      #     end
-      #
-      #     RSpec.describe SomethingElse do
-      #       it "does something", :authorized => true do
-      #         # The before hook will run before this example.
-      #       end
-      #
-      #       it "does something else" do
-      #         # The hook will not run before this example.
-      #       end
-      #     end
-      #
-      # Note that filtered config `:context` hooks can still be applied
-      # to individual examples that have matching metadata. Just like
-      # Ruby's object model is that every object has a singleton class
-      # which has only a single instance, RSpec's model is that every
-      # example has a singleton example group containing just the one
-      # example.
-      #
-      # ### Warning: `before(:suite, :with => :conditions)`
-      #
-      # The conditions hash is used to match against specific examples. Since
-      # `before(:suite)` is not run in relation to any specific example or
-      # group, conditions passed along with `:suite` are effectively ignored.
-      #
-      # ### Exceptions
-      #
-      # When an exception is raised in a `before` block, RSpec skips any
-      # subsequent `before` blocks and the example, but runs all of the
-      # `after(:example)` and `after(:context)` hooks.
-      #
-      # ### Warning: implicit before blocks
-      #
-      # `before` hooks can also be declared in shared contexts which get
-      # included implicitly either by you or by extension libraries. Since
-      # RSpec runs these in the order in which they are declared within each
-      # scope, load order matters, and can lead to confusing results when one
-      # before block depends on state that is prepared in another before block
-      # that gets run later.
-      #
-      # ### Warning: `before(:context)`
-      #
-      # It is very tempting to use `before(:context)` to speed things up, but we
-      # recommend that you avoid this as there are a number of gotchas, as well
-      # as things that simply don't work.
-      #
-      # #### Context
-      #
-      # `before(:context)` is run in an example that is generated to provide
-      # group context for the block.
-      #
-      # #### Instance variables
-      #
-      # Instance variables declared in `before(:context)` are shared across all
-      # the examples in the group. This means that each example can change the
-      # state of a shared object, resulting in an ordering dependency that can
-      # make it difficult to reason about failures.
-      #
-      # #### Unsupported RSpec constructs
-      #
-      # RSpec has several constructs that reset state between each example
-      # automatically. These are not intended for use from within
-      # `before(:context)`:
-      #
-      #   * `let` declarations
-      #   * `subject` declarations
-      #   * Any mocking, stubbing or test double declaration
-      #
-      # ### other frameworks
-      #
-      # Mock object frameworks and database transaction managers (like
-      # ActiveRecord) are typically designed around the idea of setting up
-      # before an example, running that one example, and then tearing down. This
-      # means that mocks and stubs can (sometimes) be declared in
-      # `before(:context)`, but get torn down before the first real example is
-      # ever run.
-      #
-      # You _can_ create database-backed model objects in a `before(:context)`
-      # in rspec-rails, but it will not be wrapped in a transaction for you, so
-      # you are on your own to clean up in an `after(:context)` block.
-      #
-      # @example before(:example) declared in an {ExampleGroup}
-      #
-      #     RSpec.describe Thing do
-      #       before(:example) do
-      #         @thing = Thing.new
-      #       end
-      #
-      #       it "does something" do
-      #         # Here you can access @thing.
-      #       end
-      #     end
-      #
-      # @example before(:context) declared in an {ExampleGroup}
-      #
-      #     RSpec.describe Parser do
-      #       before(:context) do
-      #         File.open(file_to_parse, 'w') do |f|
-      #           f.write <<-CONTENT
-      #             stuff in the file
-      #           CONTENT
-      #         end
-      #       end
-      #
-      #       it "parses the file" do
-      #         Parser.parse(file_to_parse)
-      #       end
-      #
-      #       after(:context) do
-      #         File.delete(file_to_parse)
-      #       end
-      #     end
-      #
-      # @note The `:example` and `:context` scopes are also available as
-      #       `:each` and `:all`, respectively. Use whichever you prefer.
-      # @note The `:suite` scope is only supported for hooks registered on
-      #       `RSpec.configuration` since they exist independently of any
-      #       example or example group.
-      def before(*args, &block)
-        hooks.register :append, :before, *args, &block
-      end
-
-      alias_method :append_before, :before
-
-      # Adds `block` to the front of the list of `before` blocks in the same
-      # scope (`:example`, `:context`, or `:suite`).
-      #
-      # See {#before} for scoping semantics.
-      def prepend_before(*args, &block)
-        hooks.register :prepend, :before, *args, &block
-      end
-
-      # @api public
-      # @overload after(&block)
-      # @overload after(scope, &block)
-      #   @param scope [Symbol] `:example`, `:context`, or `:suite` (defaults to
-      #     `:example`)
-      # @overload after(scope, *conditions, &block)
-      #   @param scope [Symbol] `:example`, `:context`, or `:suite` (defaults to
-      #     `:example`)
-      #   @param conditions [Array<Symbol>, Hash] constrains this hook to
-      #     examples matching these conditions e.g.
-      #     `after(:example, :ui => true) { ... }` will only run with examples
-      #     or groups declared with `:ui => true`. Symbols will be transformed
-      #     into hash entries with `true` values.
-      # @overload after(conditions, &block)
-      #   @param conditions [Hash]
-      #     constrains this hook to examples matching these conditions e.g.
-      #     `after(:example, :ui => true) { ... }` will only run with examples
-      #     or groups declared with `:ui => true`.
-      #
-      # @see #before
-      # @see #around
-      # @see ExampleGroup
-      # @see SharedContext
-      # @see SharedExampleGroup
-      # @see Configuration
-      #
-      # Declare a block of code to be run after each example (using `:example`)
-      # or once after all examples n the context (using `:context`). See
-      # {#before} for more information about ordering.
-      #
-      # ### Exceptions
-      #
-      # `after` hooks are guaranteed to run even when there are exceptions in
-      # `before` hooks or examples. When an exception is raised in an after
-      # block, the exception is captured for later reporting, and subsequent
-      # `after` blocks are run.
-      #
-      # ### Order
-      #
-      # `after` hooks are stored in three scopes, which are run in order:
-      # `:example`, `:context`, and `:suite`. They can also be declared in
-      # several different places: `RSpec.configure`, a parent group, the current
-      # group. They are run in the following order:
-      #
-      #     after(:example) # Declared in the current group.
-      #     after(:example) # Declared in a parent group.
-      #     after(:example) # Declared in RSpec.configure.
-      #     after(:context) # Declared in the current group.
-      #     after(:context) # Declared in a parent group.
-      #     after(:context) # Declared in RSpec.configure.
-      #     after(:suite)   # Declared in RSpec.configure.
-      #
-      # This is the reverse of the order in which `before` hooks are run.
-      # Similarly, if more than one `after` is declared within any one scope,
-      # they are run in reverse order of that in which they are declared. Also
-      # `around` hooks will all have run before any after hooks are invoked.
-      #
-      # @note The `:example` and `:context` scopes are also available as
-      #       `:each` and `:all`, respectively. Use whichever you prefer.
-      # @note The `:suite` scope is only supported for hooks registered on
-      #       `RSpec.configuration` since they exist independently of any
-      #       example or example group.
-      def after(*args, &block)
-        hooks.register :prepend, :after, *args, &block
-      end
-
-      alias_method :prepend_after, :after
-
-      # Adds `block` to the back of the list of `after` blocks in the same
-      # scope (`:example`, `:context`, or `:suite`).
-      #
-      # See {#after} for scoping semantics.
-      def append_after(*args, &block)
-        hooks.register :append, :after, *args, &block
-      end
-
-      # @api public
-      # @overload around(&block)
-      # @overload around(scope, &block)
-      #   @param scope [Symbol] `:example` (defaults to `:example`)
-      #     present for syntax parity with `before` and `after`, but
-      #     `:example`/`:each` is the only supported value.
-      # @overload around(scope, *conditions, &block)
-      #   @param scope [Symbol] `:example` (defaults to `:example`)
-      #     present for syntax parity with `before` and `after`, but
-      #     `:example`/`:each` is the only supported value.
-      #   @param conditions [Array<Symbol>, Hash] constrains this hook to
-      #     examples matching these conditions e.g.
-      #     `around(:example, :ui => true) { ... }` will only run with examples
-      #     or groups declared with `:ui => true`. Symbols will be transformed
-      #     into hash entries with `true` values.
-      # @overload around(conditions, &block)
-      #   @param conditions [Hash] constrains this hook to examples matching
-      #     these conditions e.g. `around(:example, :ui => true) { ... }` will
-      #     only run with examples or groups declared with `:ui => true`.
-      #
-      # @yield [Example] the example to run
-      #
-      # @note the syntax of `around` is similar to that of `before` and `after`
-      #   but the semantics are quite different. `before` and `after` hooks are
-      #   run in the context of of the examples with which they are associated,
-      #   whereas `around` hooks are actually responsible for running the
-      #   examples. Consequently, `around` hooks do not have direct access to
-      #   resources that are made available within the examples and their
-      #   associated `before` and `after` hooks.
-      #
-      # @note `:example`/`:each` is the only supported scope.
-      #
-      # Declare a block of code, parts of which will be run before and parts
-      # after the example. It is your responsibility to run the example:
-      #
-      #     around(:example) do |ex|
-      #       # Do some stuff before.
-      #       ex.run
-      #       # Do some stuff after.
-      #     end
-      #
-      # The yielded example aliases `run` with `call`, which lets you treat it
-      # like a `Proc`. This is especially handy when working with libraries
-      # that manage their own setup and teardown using a block or proc syntax,
-      # e.g.
-      #
-      #     around(:example) {|ex| Database.transaction(&ex)}
-      #     around(:example) {|ex| FakeFS(&ex)}
-      #
-      # ### Order
-      #
-      # All `around` hooks execute immediately surrounding an example, this means
-      # that all `before` hooks will have run and no `after` hooks will have run yet.
-      #
-      # They are not a synonym for `before`/`after`.
-      def around(*args, &block)
-        hooks.register :prepend, :around, *args, &block
-      end
-
-      # @private
-      # Holds the various registered hooks.
-      def hooks
-        @hooks ||= HookCollections.new(self, FilterableItemRepository::UpdateOptimized)
-      end
-
-      # @private
-      Hook = Struct.new(:block, :options)
-
-      # @private
-      class BeforeHook < Hook
-        def run(example)
-          example.instance_exec(example, &block)
-        end
-      end
-
-      # @private
-      class AfterHook < Hook
-        def run(example)
-          example.instance_exec(example, &block)
-        rescue Support::AllExceptionsExceptOnesWeMustNotRescue => ex
-          example.set_exception(ex)
-        end
-      end
-
-      # @private
-      class AfterContextHook < Hook
-        def run(example)
-          example.instance_exec(example, &block)
-        rescue Support::AllExceptionsExceptOnesWeMustNotRescue => e
-          RSpec.configuration.reporter.notify_non_example_exception(e, "An error occurred in an `after(:context)` hook.")
-        end
-      end
-
-      # @private
-      class AroundHook < Hook
-        def execute_with(example, procsy)
-          example.instance_exec(procsy, &block)
-          return if procsy.executed?
-          Pending.mark_skipped!(example,
-                                "#{hook_description} did not execute the example")
-        end
-
-        if Proc.method_defined?(:source_location)
-          def hook_description
-            "around hook at #{Metadata.relative_path(block.source_location.join(':'))}"
-          end
-        else # for 1.8.7
-          # :nocov:
-          def hook_description
-            "around hook"
-          end
-          # :nocov:
-        end
-      end
-
-      # @private
-      #
-      # This provides the primary API used by other parts of rspec-core. By hiding all
-      # implementation details behind this facade, it's allowed us to heavily optimize
-      # this, so that, for example, hook collection objects are only instantiated when
-      # a hook is added. This allows us to avoid many object allocations for the common
-      # case of a group having no hooks.
-      #
-      # This is only possible because this interface provides a "tell, don't ask"-style
-      # API, so that callers _tell_ this class what to do with the hooks, rather than
-      # asking this class for a list of hooks, and then doing something with them.
-      class HookCollections
-        def initialize(owner, filterable_item_repo_class)
-          @owner                      = owner
-          @filterable_item_repo_class = filterable_item_repo_class
-          @before_example_hooks       = nil
-          @after_example_hooks        = nil
-          @before_context_hooks       = nil
-          @after_context_hooks        = nil
-          @around_example_hooks       = nil
-        end
-
-        def register_globals(host, globals)
-          parent_groups = host.parent_groups
-
-          process(host, parent_groups, globals, :before, :example, &:options)
-          process(host, parent_groups, globals, :after,  :example, &:options)
-          process(host, parent_groups, globals, :around, :example, &:options)
-
-          process(host, parent_groups, globals, :before, :context, &:options)
-          process(host, parent_groups, globals, :after,  :context, &:options)
-        end
-
-        def register_global_singleton_context_hooks(example, globals)
-          parent_groups = example.example_group.parent_groups
-
-          process(example, parent_groups, globals, :before, :context) { {} }
-          process(example, parent_groups, globals, :after,  :context) { {} }
-        end
-
-        def register(prepend_or_append, position, *args, &block)
-          scope, options = scope_and_options_from(*args)
-
-          if scope == :suite
-            # TODO: consider making this an error in RSpec 4. For SemVer reasons,
-            # we are only warning in RSpec 3.
-            RSpec.warn_with "WARNING: `#{position}(:suite)` hooks are only supported on " \
-                            "the RSpec configuration object. This " \
-                            "`#{position}(:suite)` hook, registered on an example " \
-                            "group, will be ignored."
-            return
-          elsif scope == :context && position == :around
-            # TODO: consider making this an error in RSpec 4. For SemVer reasons,
-            # we are only warning in RSpec 3.
-            RSpec.warn_with "WARNING: `around(:context)` hooks are not supported and " \
-                            "behave like `around(:example)."
-          end
-
-          hook = HOOK_TYPES[position][scope].new(block, options)
-          ensure_hooks_initialized_for(position, scope).__send__(prepend_or_append, hook, options)
-        end
-
-        # @private
-        #
-        # Runs all of the blocks stored with the hook in the context of the
-        # example. If no example is provided, just calls the hook directly.
-        def run(position, scope, example_or_group)
-          return if RSpec.configuration.dry_run?
-
-          if scope == :context
-            unless example_or_group.class.metadata[:skip]
-              run_owned_hooks_for(position, :context, example_or_group)
-            end
-          else
-            case position
-            when :before then run_example_hooks_for(example_or_group, :before, :reverse_each)
-            when :after  then run_example_hooks_for(example_or_group, :after,  :each)
-            when :around then run_around_example_hooks_for(example_or_group) { yield }
-            end
-          end
-        end
-
-        SCOPES = [:example, :context]
-
-        SCOPE_ALIASES = { :each => :example, :all => :context }
-
-        HOOK_TYPES = {
-          :before => Hash.new { BeforeHook },
-          :after  => Hash.new { AfterHook  },
-          :around => Hash.new { AroundHook }
-        }
-
-        HOOK_TYPES[:after][:context] = AfterContextHook
-
-      protected
-
-        EMPTY_HOOK_ARRAY = [].freeze
-
-        def matching_hooks_for(position, scope, example_or_group)
-          repository = hooks_for(position, scope) { return EMPTY_HOOK_ARRAY }
-
-          # It would be nice to not have to switch on type here, but
-          # we don't want to define `ExampleGroup#metadata` because then
-          # `metadata` from within an individual example would return the
-          # group's metadata but the user would probably expect it to be
-          # the example's metadata.
-          metadata = case example_or_group
-                     when ExampleGroup then example_or_group.class.metadata
-                     else example_or_group.metadata
-                     end
-
-          repository.items_for(metadata)
-        end
-
-        def all_hooks_for(position, scope)
-          hooks_for(position, scope) { return EMPTY_HOOK_ARRAY }.items_and_filters.map(&:first)
-        end
-
-        def run_owned_hooks_for(position, scope, example_or_group)
-          matching_hooks_for(position, scope, example_or_group).each do |hook|
-            hook.run(example_or_group)
-          end
-        end
-
-        def processable_hooks_for(position, scope, host)
-          if scope == :example
-            all_hooks_for(position, scope)
-          else
-            matching_hooks_for(position, scope, host)
-          end
-        end
-
-      private
-
-        def hooks_for(position, scope)
-          if position == :before
-            scope == :example ? @before_example_hooks : @before_context_hooks
-          elsif position == :after
-            scope == :example ? @after_example_hooks : @after_context_hooks
-          else # around
-            @around_example_hooks
-          end || yield
-        end
-
-        def ensure_hooks_initialized_for(position, scope)
-          if position == :before
-            if scope == :example
-              @before_example_hooks ||= @filterable_item_repo_class.new(:all?)
-            else
-              @before_context_hooks ||= @filterable_item_repo_class.new(:all?)
-            end
-          elsif position == :after
-            if scope == :example
-              @after_example_hooks ||= @filterable_item_repo_class.new(:all?)
-            else
-              @after_context_hooks ||= @filterable_item_repo_class.new(:all?)
-            end
-          else # around
-            @around_example_hooks ||= @filterable_item_repo_class.new(:all?)
-          end
-        end
-
-        def process(host, parent_groups, globals, position, scope)
-          hooks_to_process = globals.processable_hooks_for(position, scope, host)
-          return if hooks_to_process.empty?
-
-          hooks_to_process -= FlatMap.flat_map(parent_groups) do |group|
-            group.hooks.all_hooks_for(position, scope)
-          end
-          return if hooks_to_process.empty?
-
-          repository = ensure_hooks_initialized_for(position, scope)
-          hooks_to_process.each { |hook| repository.append hook, (yield hook) }
-        end
-
-        def scope_and_options_from(*args)
-          return :suite if args.first == :suite
-          scope = extract_scope_from(args)
-          meta  = Metadata.build_hash_from(args, :warn_about_example_group_filtering)
-          return scope, meta
-        end
-
-        def extract_scope_from(args)
-          if known_scope?(args.first)
-            normalized_scope_for(args.shift)
-          elsif args.any? { |a| a.is_a?(Symbol) }
-            error_message = "You must explicitly give a scope " \
-              "(#{SCOPES.join(", ")}) or scope alias " \
-              "(#{SCOPE_ALIASES.keys.join(", ")}) when using symbols as " \
-              "metadata for a hook."
-            raise ArgumentError.new error_message
-          else
-            :example
-          end
-        end
-
-        def known_scope?(scope)
-          SCOPES.include?(scope) || SCOPE_ALIASES.keys.include?(scope)
-        end
-
-        def normalized_scope_for(scope)
-          SCOPE_ALIASES[scope] || scope
-        end
-
-        def run_example_hooks_for(example, position, each_method)
-          owner_parent_groups.__send__(each_method) do |group|
-            group.hooks.run_owned_hooks_for(position, :example, example)
-          end
-        end
-
-        def run_around_example_hooks_for(example)
-          hooks = FlatMap.flat_map(owner_parent_groups) do |group|
-            group.hooks.matching_hooks_for(:around, :example, example)
-          end
-
-          return yield if hooks.empty? # exit early to avoid the extra allocation cost of `Example::Procsy`
-
-          initial_procsy = Example::Procsy.new(example) { yield }
-          hooks.inject(initial_procsy) do |procsy, around_hook|
-            procsy.wrap { around_hook.execute_with(example, procsy) }
-          end.call
-        end
-
-        if respond_to?(:singleton_class) && singleton_class.ancestors.include?(singleton_class)
-          def owner_parent_groups
-            @owner.parent_groups
-          end
-        else # Ruby < 2.1 (see https://bugs.ruby-lang.org/issues/8035)
-          # :nocov:
-          def owner_parent_groups
-            @owner_parent_groups ||= [@owner] + @owner.parent_groups
-          end
-          # :nocov:
-        end
-      end
-    end
-  end
-end