puppet 8.4.0-x64-mingw32 → 8.5.1-x64-mingw32

data/lib/puppet/parser/functions/next.rb

@@ -1,29 +1,29 @@
 # frozen_string_literal: true
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :next,
   :arity => -2,
   :doc => <<~DOC
     Immediately returns the given optional value from a block (lambda), function, class body or user defined type body.
     If a value is not given, an `undef` value is returned. This function does not return to the immediate caller.
-    
+
     The signal produced to return a value bubbles up through
     the call stack until reaching a code block (lambda), function, class definition or
     definition of a user defined type at which point the value given to the function will
     be produced as the result of that body of code. An error is raised
     if the signal to return a value reaches the end of the call stack.
-    
+
     **Example:** Using `next` in `each`
-    
+
     ```puppet
     $data = [1,2,3]
     $data.each |$x| { if $x == 2 { next() } notice $x }
     ```
-    
+
     Would notice the values `1` and `3`
-    
+
     **Example:** Using `next` to produce a value
-    
+
     If logic consists of deeply nested conditionals it may be complicated to get out of the innermost conditional.
     A call to `next` can then simplify the logic. This example however, only shows the principle.
     ```puppet
@@ -31,7 +31,7 @@ Puppet::Parser::Functions::newfunction(
     notice $data.map |$x| { if $x == 2 { next($x*100) }; $x*10 }
     ```
     Would notice the value `[10, 200, 30]`
-    
+
     * Also see functions `return` and `break`
     * Since 4.8.0
   DOC

data/lib/puppet/parser/functions/realize.rb

@@ -3,15 +3,16 @@
 # This is just syntactic sugar for a collection, although it will generally
 # be a good bit faster.
 
-Puppet::Parser::Functions::newfunction(:realize, :arity => -2, :doc => "Make a virtual object real.  This is useful
+Puppet::Parser::Functions.newfunction(:realize, :arity => -2, :doc => "Make a virtual object real.  This is useful
     when you want to know the name of the virtual object and don't want to
     bother with a full collection.  It is slightly faster than a collection,
     and, of course, is a bit shorter.  You must pass the object using a
-    reference; e.g.: `realize User[luke]`." ) do |vals|
+    reference; e.g.: `realize User[luke]`.") do |vals|
   if Puppet[:tasks]
     raise Puppet::ParseErrorWithIssue.from_issue_and_stack(
       Puppet::Pops::Issues::CATALOG_OPERATION_NOT_SUPPORTED_WHEN_SCRIPTING,
-      {:operation => 'realize'})
+      { :operation => 'realize' }
+    )
   end
 
   vals = [vals] unless vals.is_a?(Array)

data/lib/puppet/parser/functions/reduce.rb

@@ -1,6 +1,6 @@
 # frozen_string_literal: true
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :reduce,
   :type => :rvalue,
   :arity => -3,
@@ -10,62 +10,62 @@ Puppet::Parser::Functions::newfunction(
     value of each iteration, and returns the result of the lambda's final iteration. This
     lets you create a new value or data structure by combining values from the first
     argument's data structure.
-    
+
     This function takes two mandatory arguments, in this order:
-    
+
     1. An array or hash the function will iterate over.
     2. A lambda, which the function calls for each element in the first argument. It takes
     two mandatory parameters:
         1. A memo value that is overwritten after each iteration with the iteration's result.
         2. A second value that is overwritten after each iteration with the next value in the
         function's first argument.
-    
+
     **Example**: Using the `reduce` function
-    
+
     `$data.reduce |$memo, $value| { ... }`
-    
+
     or
-    
+
     `reduce($data) |$memo, $value| { ... }`
-    
+
     You can also pass an optional "start memo" value as an argument, such as `start` below:
-    
+
     `$data.reduce(start) |$memo, $value| { ... }`
-    
+
     or
-    
+
     `reduce($data, start) |$memo, $value| { ... }`
-    
+
     When the first argument (`$data` in the above example) is an array, Puppet passes each
     of the data structure's values in turn to the lambda's parameters. When the first
     argument is a hash, Puppet converts each of the hash's values to an array in the form
     `[key, value]`.
-    
+
     If you pass a start memo value, Puppet executes the lambda with the provided memo value
     and the data structure's first value. Otherwise, Puppet passes the structure's first two
     values to the lambda.
-    
+
     Puppet calls the lambda for each of the data structure's remaining values. For each
     call, it passes the result of the previous call as the first parameter ($memo in the
     above examples) and the next value from the data structure as the second parameter
     ($value).
-    
+
     If the structure has one value, Puppet returns the value and does not call the lambda.
-    
+
     **Example**: Using the `reduce` function
-    
+
     ~~~ puppet
     # Reduce the array $data, returning the sum of all values in the array.
     $data = [1, 2, 3]
     $sum = $data.reduce |$memo, $value| { $memo + $value }
     # $sum contains 6
-    
+
     # Reduce the array $data, returning the sum of a start memo value and all values in the
     # array.
     $data = [1, 2, 3]
     $sum = $data.reduce(4) |$memo, $value| { $memo + $value }
     # $sum contains 10
-    
+
     # Reduce the hash $data, returning the sum of all values and concatenated string of all
     # keys.
     $data = {a => 1, b => 2, c => 3}
@@ -76,9 +76,9 @@ Puppet::Parser::Functions::newfunction(
     }
     # $combine contains [abc, 6]
     ~~~
-    
+
     **Example**: Using the `reduce` function with a start memo and two-parameter lambda
-    
+
     ~~~ puppet
     # Reduce the array $data, returning the sum of all values in the array and starting
     # with $memo set to an arbitrary value instead of $data's first value.
@@ -86,7 +86,7 @@ Puppet::Parser::Functions::newfunction(
     $sum = $data.reduce(4) |$memo, $value| { $memo + $value }
     # At the start of the lambda's first iteration, $memo contains 4 and $value contains 1.
     # After all iterations, $sum contains 10.
-    
+
     # Reduce the hash $data, returning the sum of all values and concatenated string of
     # all keys, and starting with $memo set to an arbitrary array instead of $data's first
     # key-value pair.
@@ -100,9 +100,9 @@ Puppet::Parser::Functions::newfunction(
     # contains [a, 1].
     # $combine contains [dabc, 10]
     ~~~
-    
+
     **Example**: Using the `reduce` function to reduce a hash of hashes
-    
+
     ~~~ puppet
     # Reduce a hash of hashes $data, merging defaults into the inner hashes.
     $data = {
@@ -115,14 +115,14 @@ Puppet::Parser::Functions::newfunction(
         'password' => 'pass2',
       },
     }
-    
+
     $defaults = {
       'maxActive' => '20',
       'maxWait'   => '10000',
       'username'  => 'defaultuser',
       'password'  => 'defaultpass',
     }
-    
+
     $merged = $data.reduce( {} ) |$memo, $x| {
       $memo + { $x[0] => $defaults + $data[$x[0]] }
     }
@@ -131,7 +131,7 @@ Puppet::Parser::Functions::newfunction(
     # subsequent rounds, $memo retains the value returned by the expression, i.e.
     # $memo + { $x[0] => $defaults + $data[$x[0]] }.
     ~~~
-    
+
     - Since 4.0.0
   DOC
 ) do |_args|

data/lib/puppet/parser/functions/regsubst.rb

@@ -58,7 +58,8 @@ Get the third octet from the node's IP address:
 Put angle brackets around each octet in the node's IP address:
 
     $x = regsubst($ipaddress, '([0-9]+)', '<\\1>', 'G')
-") do |_args|
-  Error.is4x('regsubst')
-end
+"
+  ) do |_args|
+    Error.is4x('regsubst')
+  end
 end

data/lib/puppet/parser/functions/require.rb

@@ -2,7 +2,7 @@
 
 # Requires the specified classes
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :require,
   :arity => -2,
   :doc => "Evaluate one or more classes,  adding the required class as a dependency.
@@ -36,7 +36,8 @@ resource and relationship expressions.
 
 - Since 4.0.0 Class and Resource types, absolute names
 - Since 4.7.0 Returns an Array[Type[Class]] with references to the required classes
-") do |classes|
+"
+) do |classes|
   call_function('require', classes)
   Puppet.warn_once('deprecations', '3xfunction#require', _("Calling function_require via the Scope class is deprecated. Use Scope#call_function instead"))
 end

data/lib/puppet/parser/functions/return.rb

@@ -1,6 +1,6 @@
 # frozen_string_literal: true
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :return,
   :arity => -2,
   :doc => <<~DOC
@@ -8,15 +8,15 @@ Puppet::Parser::Functions::newfunction(
     If a value is not given, an `undef` value is returned. This function does not return to the immediate caller.
     If this function is called from within a lambda, the return action is from the scope of the
     function containing the lambda (top scope), not the function accepting the lambda (local scope).
-    
+
     The signal produced to return a value bubbles up through
     the call stack until reaching a function, class definition or
     definition of a user defined type at which point the value given to the function will
     be produced as the result of that body of code. An error is raised
     if the signal to return a value reaches the end of the call stack.
-    
+
     **Example:** Using `return`
-    
+
     ```puppet
     function example($x) {
       # handle trivial cases first for better readability of
@@ -25,14 +25,14 @@ Puppet::Parser::Functions::newfunction(
         return false
       }
       # complex logic to determine if value is true
-      true 
+      true
     }
     notice example([]) # would notice false
     notice example(42) # would notice true
     ```
-    
+
     **Example:** Using `return` in a class
-    
+
     ```puppet
     class example($x) {
       # handle trivial cases first for better readability of
@@ -47,27 +47,27 @@ Puppet::Parser::Functions::newfunction(
       notice 'bar'
     }
     ```
-    
+
     When used like this:
-    
+
     ```puppet
     class { example: x => [] }
     ```
-    
+
     The code would notice `'foo'`, but not `'bar'`.
-    
+
     When used like this:
-    
+
     ```puppet
     class { example: x => [some_value] }
     ```
-    
+
     The code would notice `'bar'` but not `'foo'`
-    
+
     Note that the returned value is ignored if used in a class or user defined type.
-    
+
     **Example:** Using `return` in a lambda
-    
+
     ```puppet
     # Concatenate three strings into a single string formatted as a list.
     function getFruit() {
@@ -78,14 +78,14 @@ Puppet::Parser::Functions::newfunction(
     }
     $fruit = getFruit()
     notice $fruit
-    
+
     # The output contains "apples, oranges, and bananas".
     # "not reached" is not output because the function returns its value within the
     # calling function's scope, which stops processing the calling function before
     # the `notice "not reached"` statement.
     # Using `return()` outside of a calling function results in an error.
     ```
-    
+
     * Also see functions `return` and `break`
     * Since 4.8.0
   DOC

data/lib/puppet/parser/functions/reverse_each.rb

@@ -1,6 +1,6 @@
 # frozen_string_literal: true
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :reverse_each,
   :type => :rvalue,
   :arity => -1,
@@ -8,57 +8,57 @@ Puppet::Parser::Functions::newfunction(
     Reverses the order of the elements of something that is iterable and optionally runs a
     [lambda](https://puppet.com/docs/puppet/latest/lang_lambdas.html) for each
     element.
-    
+
     This function takes one to two arguments:
-    
+
     1. An `Iterable` that the function will iterate over.
     2. An optional lambda, which the function calls for each element in the first argument. It must
        request one parameter.
-    
+
     **Example:** Using the `reverse_each` function
-    
+
     ```puppet
     $data.reverse_each |$parameter| { <PUPPET CODE BLOCK> }
     ```
-    
+
     or
-    
+
     ```puppet
     $reverse_data = $data.reverse_each
     ```
-    
+
     or
-    
+
     ```puppet
     reverse_each($data) |$parameter| { <PUPPET CODE BLOCK> }
     ```
-    
+
     or
-    
+
     ```puppet
     $reverse_data = reverse_each($data)
     ```
-    
+
     When no second argument is present, Puppet returns an `Iterable` that represents the reverse
     order of its first argument. This allows methods on `Iterable` to be chained.
-    
+
     When a lambda is given as the second argument, Puppet iterates the first argument in reverse
     order and passes each value in turn to the lambda, then returns `undef`.
-    
+
     **Example:** Using the `reverse_each` function with an array and a one-parameter lambda
-    
+
     ``` puppet
     # Puppet will log a notice for each of the three items
     # in $data in reverse order.
     $data = [1,2,3]
     $data.reverse_each |$item| { notice($item) }
     ```
-    
+
     When no second argument is present, Puppet returns a new `Iterable` which allows it to
     be directly chained into another function that takes an `Iterable` as an argument.
-    
+
     **Example:** Using the `reverse_each` function chained with a `map` function.
-    
+
     ```puppet
     # For the array $data, return an array containing each
     # value multiplied by 10 in reverse order
@@ -66,9 +66,9 @@ Puppet::Parser::Functions::newfunction(
     $transformed_data = $data.reverse_each.map |$item| { $item * 10 }
     # $transformed_data is set to [30,20,10]
     ```
-    
+
     **Example:** Using `reverse_each` function chained with a `map` in alternative syntax
-    
+
     ```puppet
     # For the array $data, return an array containing each
     # value multiplied by 10 in reverse order
@@ -76,9 +76,9 @@ Puppet::Parser::Functions::newfunction(
     $transformed_data = map(reverse_each($data)) |$item| { $item * 10 }
     # $transformed_data is set to [30,20,10]
     ```
-    
+
     * Since 4.4.0
-    
+
   DOC
 ) do |_args|
   Puppet::Parser::Functions::Error.is4x('reverse_each')

data/lib/puppet/parser/functions/scanf.rb

@@ -2,7 +2,7 @@
 
 require 'scanf'
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :scanf,
   :type => :rvalue,
   :arity => 2,
@@ -10,18 +10,18 @@ Puppet::Parser::Functions::newfunction(
     Scans a string and returns an array of one or more converted values based on the given format string.
     See the documentation of Ruby's String#scanf method for details about the supported formats (which
     are similar but not identical to the formats used in Puppet's `sprintf` function.)
-    
+
     This function takes two mandatory arguments: the first is the string to convert, and the second is
     the format string. The result of the scan is an array, with each successfully scanned and transformed value.
     The scanning stops if a scan is unsuccessful, and the scanned result up to that point is returned. If there
     was no successful scan, the result is an empty array.
-    
+
     ```puppet
     "42".scanf("%i")
     ```
-    
+
     You can also optionally pass a lambda to scanf, to do additional validation or processing.
-    
+
     ```puppet
     "42".scanf("%i") |$x| {
       unless $x[0] =~ Integer {
@@ -30,7 +30,7 @@ Puppet::Parser::Functions::newfunction(
       $x[0]
     }
     ```
-    
+
     - Since 4.0.0
   DOC
 ) do |args|

data/lib/puppet/parser/functions/sha1.rb

@@ -2,6 +2,6 @@
 
 require 'digest/sha1'
 
-Puppet::Parser::Functions::newfunction(:sha1, :type => :rvalue, :arity => 1, :doc => "Returns a SHA1 hash value from a provided string.") do |args|
+Puppet::Parser::Functions.newfunction(:sha1, :type => :rvalue, :arity => 1, :doc => "Returns a SHA1 hash value from a provided string.") do |args|
   Digest::SHA1.hexdigest(args[0])
 end

data/lib/puppet/parser/functions/sha256.rb

@@ -2,6 +2,6 @@
 
 require 'digest/sha2'
 
-Puppet::Parser::Functions::newfunction(:sha256, :type => :rvalue, :arity => 1, :doc => "Returns a SHA256 hash value from a provided string.") do |args|
+Puppet::Parser::Functions.newfunction(:sha256, :type => :rvalue, :arity => 1, :doc => "Returns a SHA256 hash value from a provided string.") do |args|
   Digest::SHA256.hexdigest(args[0])
 end

data/lib/puppet/parser/functions/slice.rb

@@ -1,39 +1,39 @@
 # frozen_string_literal: true
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :slice,
   :type => :rvalue,
   :arity => -3,
   :doc => <<~DOC
     This function takes two mandatory arguments: the first should be an array or hash, and the second specifies
     the number of elements to include in each slice.
-    
+
     When the first argument is a hash, each key value pair is counted as one. For example, a slice size of 2 will produce
     an array of two arrays with key, and value.
-    
+
         $a.slice(2) |$entry|          { notice "first ${$entry[0]}, second ${$entry[1]}" }
         $a.slice(2) |$first, $second| { notice "first ${first}, second ${second}" }
-    
+
     The function produces a concatenated result of the slices.
-    
+
         slice([1,2,3,4,5,6], 2) # produces [[1,2], [3,4], [5,6]]
         slice(Integer[1,6], 2)  # produces [[1,2], [3,4], [5,6]]
         slice(4,2)              # produces [[0,1], [2,3]]
         slice('hello',2)        # produces [[h, e], [l, l], [o]]
-    
+
     You can also optionally pass a lambda to slice.
-    
+
         $a.slice($n) |$x| { ... }
         slice($a) |$x| { ... }
-    
+
     The lambda should have either one parameter (receiving an array with the slice), or the same number
     of parameters as specified by the slice size (each parameter receiving its part of the slice).
     If there are fewer remaining elements than the slice size for the last slice, it will contain the remaining
     elements. If the lambda has multiple parameters, excess parameters are set to undef for an array, or
     to empty arrays for a hash.
-    
+
         $a.slice(2) |$first, $second| { ... }
-    
+
     - Since 4.0.0
   DOC
 ) do |_args|

data/lib/puppet/parser/functions/split.rb

@@ -22,7 +22,8 @@ while `$array_var2` holds `['v1', 'v2:v3', 'v4']`, and
 Note that in the second example, we split on a literal string that contains
 a regexp meta-character (.), which must be escaped.  A simple
 way to do that for a single character is to enclose it in square
-brackets; a backslash will also escape a single character.") do |_args|
+brackets; a backslash will also escape a single character."
+  ) do |_args|
     Error.is4x('split')
   end
 end

data/lib/puppet/parser/functions/sprintf.rb

@@ -26,7 +26,7 @@
 # other dealings in this Software without prior written authorization
 # from Thomas Bellman.
 
-Puppet::Parser::Functions::newfunction(
+Puppet::Parser::Functions.newfunction(
   :sprintf, :type => :rvalue,
             :arity => -2,
             :doc => "Perform printf-style formatting of text.
@@ -34,7 +34,7 @@ Puppet::Parser::Functions::newfunction(
   The first parameter is format string describing how the rest of the parameters should be formatted.
   See the documentation for the [`Kernel::sprintf` function](https://ruby-doc.org/core/Kernel.html)
   in Ruby for details.
-  
+
   To use [named format](https://idiosyncratic-ruby.com/49-what-the-format.html) arguments, provide a
   hash containing the target string values as the argument to be formatted. For example:
 
@@ -45,7 +45,7 @@ Puppet::Parser::Functions::newfunction(
   This statement produces a notice of `value is : 42`."
 ) do |args|
   fmt = args[0]
-  args = args[1..-1]
+  args = args[1..]
   begin
     return sprintf(fmt, *args)
   rescue KeyError => e
@@ -54,7 +54,7 @@ Puppet::Parser::Functions::newfunction(
       # as that allows named arguments to be used in the format string.
       #
       result = {}
-      args[0].each_pair { |k,v| result[k.is_a?(String) ? k.to_sym : k] = v }
+      args[0].each_pair { |k, v| result[k.is_a?(String) ? k.to_sym : k] = v }
       return sprintf(fmt, result)
     end
     raise e