puppet 7.7.0-universal-darwin → 7.11.0-universal-darwin

data/ext/debian/puppetmaster-passenger.postrm

@@ -1,61 +0,0 @@
-#!/bin/sh
-
-set -e
-
-sitename="puppetmaster"
-
-# The debian provided a2* utils in Apache 2.4 uses "site name" as
-# argument, while the version in Apache 2.2 uses "file name".
-#
-# For added fun, the Apache 2.4 version requires files to have a
-# ".conf" suffix, but this must be stripped when using it as argument
-# for the a2* utilities.
-#
-# This will end in tears…
-# Can be removed when we only support apache >= 2.4
-apache2_puppetmaster_sitename() {
-    apache2_version="$(dpkg-query --showformat='${Version}\n' --show apache2)"
-    if dpkg --compare-versions "$apache2_version" gt "2.4~"; then
-        echo "${sitename}.conf"
-    else
-        echo "${sitename}"
-    fi
-}
-
-# Can be removed when we only support apache >= 2.4
-restart_apache2() {
-    if [ -x "/etc/init.d/apache2" ]; then
-        # Seems that a restart is needed. reload breaks ssl apparently.
-        if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
-            invoke-rc.d apache2 restart || exit $?
-        else
-            /etc/init.d/apache2 restart || exit $?
-        fi
-    fi
-}
-
-case "$1" in
-    purge)
-        if dpkg-statoverride --list /usr/share/puppet/rack/puppetmasterd/config.ru >/dev/null 2>&1
-        then
-            dpkg-statoverride --remove /usr/share/puppet/rack/puppetmasterd/config.ru
-        fi
-        # Remove the puppetmaster site configuration on purge
-        rm -f /etc/apache2/sites-available/$(apache2_puppetmaster_sitename)
-    ;;
-    remove)
-        # Disable the puppetmaster apache2 site configuration on package removal
-        a2dissite ${sitename}
-        restart_apache2
-    ;;
-    upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-        ;;
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-
-esac
-
-#DEBHELPER#
-
-exit 0

data/ext/debian/puppetmaster.README.debian

@@ -1,17 +0,0 @@
-By default, the puppetmaster package is configured in
-/etc/default/puppetmaster to use the WEBrick server included in
-the application. This server is single-threaded, very slow, and tends
-to fall over when you get close to 30 nodes. You will start to see
-connection-reset or End-of-file errors when this happens.
-
-For production deployments, use a server that can scale better than WEBrick,
-such as Passenger (aka mod_rails), with a front-end web-proxy such as Apache.
-
-To run Passenger with Apache, install the puppetmaster-passenger package. It
-automatically sets up an apache2 virtual host that runs puppetmaster under
-Passenger.
-
-For more information, see https://puppet.com/docs/puppet/latest/passenger.html.
-For information about the Puppet-designed Puppet Server, which deprecates
-the Passenger/Apache stack, see
-https://puppet.com/docs/puppetserver/latest/.

data/ext/debian/puppetmaster.default

@@ -1,14 +0,0 @@
-# Defaults for puppetmaster - sourced by /etc/init.d/puppetmaster
-
-# Enable puppetmaster service? 
-# Setting this to "yes" allows the puppet master service to run.
-# Setting this to "no" keeps the puppet master service from running.
-#
-# If you are using Passenger, you should have this set to "no."
-START=yes
-
-# Startup options
-DAEMON_OPTS=""
-
-# On what port should the puppet master listen? (default: 8140)
-PORT=8140

data/ext/debian/puppetmaster.init

@@ -1,137 +0,0 @@
-#! /bin/sh
-### BEGIN INIT INFO
-# Provides:          puppetmaster
-# Required-Start:    $network $named $remote_fs $syslog
-# Required-Stop:     $network $named $remote_fs $syslog
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-### END INIT INFO
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/bin/puppet
-DAEMON_OPTS=""
-NAME=master
-DESC="puppet master"
-
-test -x $DAEMON || exit 0
-
-[ -r /etc/default/puppetmaster ] && . /etc/default/puppetmaster
-
-. /lib/lsb/init-functions
-
-if [ ! -d /var/run/puppet ]; then
-    mkdir -p /var/run/puppet
-fi
-
-chown puppet:puppet /var/run/puppetlabs
-
-mongrel_warning="The mongrel servertype is no longer built-in to Puppet. It
-appears as though mongrel is being used, as the number of puppetmasters is
-greater than one. Starting the puppetmaster service will not behave as expected
-until this is resolved. Only the first port has been used in the service, and
-only one puppetmaster has been started. These settings are defined in
-/etc/default/puppetmaster"
-
-
-# Warn about removed and unsupported mongrel servertype
-if ([ -n "$PUPPETMASTERS" ] && [ ${PUPPETMASTERS} -gt 1 ]) || [ "${SERVERTYPE}" = "mongrel" ]; then
-    echo $mongrel_warning
-    echo
-fi
-
-is_true() {
-    if [ "x$1" = "xtrue" -o "x$1" = "xyes" -o "x$1" = "x0" ] ; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-start_puppet_master() {
-    if is_true "$START" ; then
-        start-stop-daemon --start --quiet --pidfile /var/run/puppetlabs/${NAME}.pid \
-            --startas $DAEMON -- $NAME $DAEMON_OPTS --masterport=$PORT
-    else
-        echo ""
-        echo "puppetmaster not configured to start, please edit /etc/default/puppetmaster to enable"
-    fi
-}
-
-stop_puppet_master() {
-    start-stop-daemon --stop --retry TERM/10/KILL/5 --quiet --oknodo --pidfile /var/run/puppetlabs/${NAME}.pid
-}
-
-status_puppet_master() {
-    if ( ! type status_of_proc > /dev/null 2>&1 ) ; then
-        status_of_proc() {
-            local pidfile daemon name status
-            pidfile=
-            OPTIND=1
-            while getopts p: opt ; do
-                case "$opt" in
-                    p)  pidfile="$OPTARG";;
-                esac
-            done
-            shift $(($OPTIND - 1))
-
-            if [ -n "$pidfile" ]; then
-                pidfile="-p $pidfile"
-            fi
-            daemon="$1"
-            name="$2"
-
-            status="0"
-            pidofproc $pidfile $daemon >/dev/null || status="$?"
-            if [ "$status" = 0 ]; then
-                log_success_msg "$name is running"
-                return 0
-            elif [ "$status" = 4 ]; then
-                log_failure_msg "could not access PID file for $name"
-                return $status
-            else
-                log_failure_msg "$name is not running"
-                return $status
-            fi
-        }
-    fi
-
-    if is_true "$START" ; then
-        status_of_proc -p "/var/run/puppetlabs/${NAME}.pid" "${DAEMON}" "${NAME}"
-    else
-        echo ""
-        echo "puppetmaster not configured to start"
-        status_of_proc -p "/var/run/puppetlabs/${NAME}.pid" "${DAEMON}" "${NAME}"
-    fi
-}
-
-
-case "$1" in
-    start)
-        log_begin_msg "Starting $DESC"
-        start_puppet_master
-        log_end_msg $?
-        ;;
-    stop)
-        log_begin_msg "Stopping $DESC"
-        stop_puppet_master
-        log_end_msg $?
-        ;;
-    reload)
-        # Do nothing, as Puppetmaster rechecks its config automatically
-        ;;
-    status)
-        status_puppet_master
-        ;;
-    restart|force-reload)
-        log_begin_msg "Restarting $DESC"
-        stop_puppet_master
-        start_puppet_master
-        log_end_msg $?
-        ;;
-    *)
-        echo "Usage: $0 {start|stop|status|restart|force-reload}" >&2
-        exit 1
-        ;;
-esac
-
-# vim: tabstop=4:softtabstop=4:shiftwidth=4:expandtab

data/ext/debian/puppetmaster.lintian-overrides

@@ -1,3 +0,0 @@
-# Man pages are automatically generated, not much to do here
-puppetmaster binary: manpage-has-bad-whatis-entry
-puppetmaster binary: manpage-has-errors-from-man

data/ext/debian/puppetmaster.postinst

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-set -e
-
-# Remove renamed configuration files which are now handled by other
-# packages
-if dpkg-maintscript-helper supports rm_conffile 2>/dev/null; then
-
-    dpkg-maintscript-helper rm_conffile \
-        /etc/logrotate.d/puppetmaster 2.7.16-1puppetlabs1 puppetmaster -- "$@"
-
-# For systems with dpkg < 1.15.7-2
-else
-
-    if [ -f /etc/logrotate.d/puppetmaster ]; then
-        rm /etc/logrotate.d/puppetmaster || true
-    fi
-fi
-
-#DEBHELPER#

data/ext/debian/puppetmaster.postrm

@@ -1,5 +0,0 @@
-#!/bin/sh -e
-
-#DEBHELPER#
-
-exit 0

data/ext/debian/puppetmaster.preinst

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-set -e
-
-# Remove renamed configuration files which are now handled by other
-# packages
-if dpkg-maintscript-helper supports rm_conffile 2>/dev/null; then
-
-    dpkg-maintscript-helper rm_conffile \
-        /etc/logrotate.d/puppetmaster 2.7.16-1puppetlabs1 puppetmaster -- "$@"
-
-
-# For systems with dpkg < 1.15.7-2
-else
-
-    if [ -f /etc/logrotate.d/puppetmaster ]; then
-        rm /etc/logrotate.d/puppetmaster || true
-    fi
-fi
-
-
-#DEBHELPER#

data/ext/debian/rules

@@ -1,132 +0,0 @@
-#!/usr/bin/make -f
-# -*- makefile -*-
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-INSTALL=install -Dp
-
-prefix := $(CURDIR)/debian/tmp
-bindir := $(prefix)/$(shell /usr/bin/ruby -rrbconfig -e 'puts RbConfig::CONFIG["bindir"]')
-libdir := $(prefix)/usr/lib
-localstatedir := $(prefix)/var
-rubylibdir := $(shell /usr/bin/ruby -rrbconfig -e 'puts RbConfig::CONFIG["vendordir"]')
-sysconfdir := $(prefix)/etc
-pkgconfdir := $(sysconfdir)/puppet
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-
-configure: configure-stamp
-configure-stamp:
-	dh_testdir
-	touch configure-stamp
-
-
-build-arch: build
-build-indep: build
-
-build: build-stamp
-build-stamp: configure-stamp
-	dh_testdir
-	touch build-stamp
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp configure-stamp
-	rm -f debian/puppet-common.logcheck.ignore.server
-	dh_clean
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	$(CURDIR)/install.rb --destdir=debian/tmp --bindir=/usr/bin --sitelibdir=$(rubylibdir) --ruby=/usr/bin/ruby
-
-	# strip executable bit from all the non-executable files.
-	find $(prefix)/$(rubylibdir) -type f -perm /u+x,g+x,o+x -exec chmod a-x {} \;
-	# fix the permissions on all of the directories
-	find $(prefix)/$(rubylibdir) -type d -exec chmod 755 {} \;
-
-	# Vim auto-syntax-highlighting stuff
-	$(INSTALL) -m0644 ext/vim/syntax/puppet.vim				\
-		$(CURDIR)/debian/vim-puppet/usr/share/vim/addons/syntax/
-	$(INSTALL) -m0644 ext/vim/ftdetect/puppet.vim				\
-		$(CURDIR)/debian/vim-puppet/usr/share/vim/addons/ftdetect/
-	$(INSTALL) -m0644 ext/vim/indent/puppet.vim				\
-		$(CURDIR)/debian/vim-puppet/usr/share/vim/addons/indent/
-	$(INSTALL) -m0644 ext/vim/ftplugin/puppet.vim				\
-		$(CURDIR)/debian/vim-puppet/usr/share/vim/addons/ftplugin/
-	$(INSTALL) -m0644 debian/vim-puppet.yaml				\
-		$(CURDIR)/debian/vim-puppet/usr/share/vim/registry/
-
-	# Emacs mode
-	$(INSTALL) -m0644 ext/emacs/puppet-mode.el			\
-		$(CURDIR)/debian/puppet-el/usr/share/emacs/site-lisp/puppet-mode.el
-
-	# Install the config.ru
-	$(INSTALL) -m0644 ext/rack/config.ru \
-		$(CURDIR)/debian/puppetmaster-passenger/usr/share/puppet/rack/puppetmasterd
-	# Install apache2 site configuration template
-	$(INSTALL) -m0644 ext/rack/example-passenger-vhost.conf \
-		$(CURDIR)/debian/puppetmaster-passenger/usr/share/puppetmaster-passenger/apache2.site.conf.tmpl
-
-	# Install example environment README
-	$(INSTALL) -m0644 ext/README.environment \
-		$(CURDIR)/debian/puppet-common/etc/puppet/environments/example_env/README.environment
-
-	# Add ext directory
-	cp -pr ext $(CURDIR)/debian/puppet-common/usr/share/puppet
-	# Remove misc packaging artifacts not applicable to debian
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/gentoo
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/freebsd
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/solaris
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/suse
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/windows
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/redhat
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/ips
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/osx
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/build_defaults.yaml
-	rm -rf $(CURDIR)/debian/puppet-common/usr/share/puppet/ext/project_data.yaml
-
-	dh_installexamples -p puppet-common examples/*
-
-	$(INSTALL) -d -m0775 $(pkgconfdir)/templates
-	$(INSTALL) -d -m0775 $(pkgconfdir)/modules
-
-	# Logcheck rules.  Gee I wish you could specify a file to source
-	# in dh_installlogcheck.
-	ln ext/logcheck/puppet debian/puppet-common.logcheck.ignore.server
-
-# Build architecture-dependent files here.
-binary-arch: build install
-
-# Build architecture-independent files here.
-binary-indep: build install
-	dh_testdir
-	dh_testroot
-	dh_install -i
-	dh_installdocs -i
-	dh_installemacsen
-	dh_installlogcheck
-	dh_installman
-	dh_installinit -ppuppetmaster
-	dh_installinit -ppuppet --error-handler=true -- defaults 21
-	dh_installlogrotate -i
-	dh_lintian -i
-	dh_compress -i
-	dh_fixperms -i
-	dh_installdeb -i
-	dh_shlibdeps -i
-	dh_gencontrol -i
-	dh_md5sums -i
-	dh_builddeb -i
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure

data/ext/debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

data/ext/debian/source/options

@@ -1 +0,0 @@
-single-debian-patch

data/ext/debian/vim-puppet.README.Debian

@@ -1,13 +0,0 @@
-Dear user, this package provides the vim addon puppet, but it is not enabled
-per default.
-
-If you want to enable it for your user account just execute
-
-	vim-addons install puppet
-
-Similarly, to enable it for all users of this system just execute (as root):
-
-	vim-addons -w install puppet
-
-vim-addons is provided by the vim-addon-manager package, have a look at its
-manpage for more information.