puppet 6.29.0 → 7.0.0

data/lib/puppet/forge/repository.rb

@@ -1,7 +1,6 @@
 require 'puppet/ssl/openssl_loader'
 require 'digest/sha1'
 require 'uri'
-require 'puppet/util/http_proxy'
 require 'puppet/forge'
 require 'puppet/forge/errors'
 require 'puppet/network/http'

data/lib/puppet/forge.rb

@@ -70,7 +70,7 @@ class Puppet::Forge < SemanticPuppet::Dependency::Source
         uri = decode_uri(result['pagination']['next'])
         matches.concat result['results']
       else
-        raise ResponseError.new(:uri => response.url, :response => response)
+        raise ResponseError.new(:uri => URI.parse(@host).merge(uri), :response => response)
       end
     end
 
@@ -105,7 +105,7 @@ class Puppet::Forge < SemanticPuppet::Dependency::Source
       if response.code == 200
         response = Puppet::Util::Json.load(response.body)
       else
-        raise ResponseError.new(:uri => response.url, :response => response)
+        raise ResponseError.new(:uri => URI.parse(@host).merge(uri), :response => response)
       end
 
       releases.concat(process(response['results']))
@@ -208,12 +208,12 @@ class Puppet::Forge < SemanticPuppet::Dependency::Source
       response = @source.make_http_request(uri, destination)
       destination.flush and destination.close
       unless response.code == 200
-        raise Puppet::Forge::Errors::ResponseError.new(:uri => response.url, :response => response)
+        raise Puppet::Forge::Errors::ResponseError.new(:uri => uri, :response => response)
       end
     end
 
     def validate_checksum(file, checksum, digest_class)
-      if Puppet.runtime[:facter].value(:fips_enabled) && digest_class == Digest::MD5
+      if Facter.value(:fips_enabled) && digest_class == Digest::MD5
         raise _("Module install using MD5 is prohibited in FIPS mode.")
       end
 

data/lib/puppet/functions/all.rb

@@ -51,7 +51,7 @@
 # notice $data.all |$key, $value| { $value % 10 == 0  and $key =~ /^abc/ }
 # ```
 #
-# Would notice `true`.
+# Would notice true.
 #
 # For an general examples that demonstrates iteration, see the Puppet
 # [iteration](https://puppet.com/docs/puppet/latest/lang_iteration.html)

data/lib/puppet/functions/camelcase.rb

@@ -3,7 +3,7 @@
 # This function is compatible with the stdlib function with the same name.
 #
 # The function does the following:
-# * For a `String` the conversion replaces all combinations of `*_<char>*` with an upcased version of the
+# * For a `String` the conversion replaces all combinations of *_<char>* with an upcased version of the
 #   character following the _.  This is done using Ruby system locale which handles some, but not all
 #   special international up-casing rules (for example German double-s ß is upcased to "Ss").
 # * For an `Iterable[Variant[String, Numeric]]` (for example an `Array`) each value is capitalized and the conversion is not recursive.

data/lib/puppet/functions/capitalize.rb

@@ -18,14 +18,14 @@
 # 'hello'.capitalize()
 # upcase('hello')
 # ```
-# Would both result in `"Hello"`
+# Would both result in "Hello"
 #
 # @example Capitalizing strings in an Array
 # ```puppet
 # ['abc', 'bcd'].capitalize()
 # capitalize(['abc', 'bcd'])
 # ```
-# Would both result in `['Abc', 'Bcd']`
+# Would both result in ['Abc', 'Bcd']
 #
 Puppet::Functions.create_function(:capitalize) do
 

data/lib/puppet/functions/downcase.rb

@@ -22,14 +22,14 @@
 # 'HELLO'.downcase()
 # downcase('HEllO')
 # ```
-# Would both result in `"hello"`
+# Would both result in "hello"
 #
 # @example Converting an Array to lower case
 # ```puppet
 # ['A', 'B'].downcase()
 # downcase(['A', 'B'])
 # ```
-# Would both result in `['a', 'b']`
+# Would both result in ['a', 'b']
 #
 # @example Converting a Hash to lower case
 # ```puppet

data/lib/puppet/functions/empty.rb

@@ -26,10 +26,6 @@ Puppet::Functions.create_function(:empty) do
     param 'Collection', :coll
   end
 
-  dispatch :sensitive_string_empty do
-    param 'Sensitive[String]', :str
-  end
-
   dispatch :string_empty do
     param 'String', :str
   end
@@ -50,10 +46,6 @@ Puppet::Functions.create_function(:empty) do
     coll.empty?
   end
 
-  def sensitive_string_empty(str)
-    str.unwrap.empty?
-  end
-
   def string_empty(str)
     str.empty?
   end

data/lib/puppet/functions/find_template.rb

@@ -2,11 +2,11 @@
 #
 # This function accepts an argument that is a String as a `<MODULE NAME>/<TEMPLATE>`
 # reference, which searches for `<TEMPLATE>` relative to a module's `templates`
-# directory on the primary server. (For example, the reference `mymod/secret.conf.epp`
+# directory on the master. (For example, the reference `mymod/secret.conf.epp`
 # will search for the file `<MODULES DIRECTORY>/mymod/templates/secret.conf.epp`.)
 #
 # The primary use case is for agent-side template rendering with late-bound variables
-# resolved, such as from secret stores inaccessible to the primary server, such as
+# resolved, such as from secret stores inaccessible to the master, such as
 #
 # ```
 # $variables = {

data/lib/puppet/functions/get.rb

@@ -23,20 +23,20 @@
 # #get($facts, 'os.family')
 # $facts.get('os.family')
 # ```
-# Would both result in the value of `$facts['os']['family']`
+# Would both result in the value of $facts['os']['family']
 #
 # @example Getting the value from an expression
 # ```puppet
 # get([1,2,[{'name' =>'waldo'}]], '2.0.name')
 # ```
-# Would result in `'waldo'`
+# Would result in 'waldo'
 #
 # @example Using a default value
 # ```puppet
 # get([1,2,[{'name' =>'waldo'}]], '2.1.name', 'not waldo')
 #
 # ```
-# Would result in `'not waldo'`
+# Would result in 'not waldo'
 #
 # @example Quoting a key with period
 # ```puppet
@@ -128,8 +128,8 @@ Puppet::Functions.create_function(:get, Puppet::Functions::InternalFunction) do
 
     # Note: split_key always processes the initial segment as a string even if it could be an integer.
     # This since it is designed for lookup keys. For a numeric first segment
-    # like '0.1' the wanted result is `[0,1]`, not `["0", 1]`. The workaround here is to
-    # prefix the navigation with `"x."` thus giving split_key a first segment that is a string.
+    # like '0.1' the wanted result is [0,1], not ["0", 1]. The workaround here is to
+    # prefix the navigation with "x." thus giving split_key a first segment that is a string.
     # The fake segment is then dropped.
     segments = split_key("x." + navigation) {|err| _("Syntax error in dotted-navigation string")}
     segments.shift

data/lib/puppet/functions/group_by.rb

@@ -4,22 +4,14 @@
 # and the values are arrays of elements in the collection that correspond to the key.
 Puppet::Functions.create_function(:group_by) do
   # @param collection A collection of things to group.
-  # @example Group array of strings by length, results in e.g. `{ 1 => [a, b], 2 => [ab] }`
-  #   ```puppet
+  # @example Group array of strings by length, results in e.g. { 1 => [a, b], 2 => [ab] }
   #   [a, b, ab].group_by |$s| { $s.length }
-  #   ```
-  # @example Group array of strings by length and index, results in e.g. `{1 => ['a'], 2 => ['b', 'ab']}`
-  #   ```puppet
+  # @example Group array of strings by length and index, results in e.g. {1 => ['a'], 2 => ['b', 'ab']}
   #   [a, b, ab].group_by |$i, $s| { $i%2 + $s.length }
-  #   ```
-  # @example Group hash iterating by key-value pair, results in e.g. `{ 2 => [['a', [1, 2]]], 1 => [['b', [1]]] }`
-  #   ```puppet
+  # @example Group hash iterating by key-value pair, results in e.g. { 2 => [['a', [1, 2]]], 1 => [['b', [1]]] }
   #   { a => [1, 2], b => [1] }.group_by |$kv| { $kv[1].length }
-  #   ```
-  # @example Group hash iterating by key and value, results in e.g. `{ 2 => [['a', [1, 2]]], 1 => [['b', [1]]] }`
-  #   ```puppet
-  #    { a => [1, 2], b => [1] }.group_by |$k, $v| { $v.length }
-  #   ```
+  # @example Group hash iterating by key and value, results in e.g. { 2 => [['a', [1, 2]]], 1 => [['b', [1]]] }
+  #   { a => [1, 2], b => [1] }.group_by |$k, $v| { $v.length }
   dispatch :group_by_1 do
     required_param 'Collection', :collection
     block_param 'Callable[1,1]', :block

data/lib/puppet/functions/lest.rb

@@ -23,7 +23,7 @@
 #  .lest || { fail("no value for $data[a][b][c]" }
 # ```
 #
-# Would fail the operation because `$data[a][b][c]` results in `undef`
+# Would fail the operation because $data[a][b][c] results in `undef`
 # (there is no `b` key in `a`).
 #
 # In contrast - this example:

data/lib/puppet/functions/new.rb

@@ -51,7 +51,7 @@
 # The following sections show the arguments and conversion rules
 # per data type built into the Puppet Type System.
 #
-# ### Conversion to `Optional[T]` and `NotUndef[T]`
+# ### Conversion to Optional[T] and NotUndef[T]
 #
 # Conversion to these data types is the same as a conversion to the type argument `T`.
 # In the case of `Optional[T]` it is accepted that the argument to convert may be `undef`.
@@ -85,13 +85,13 @@
 #   * `0` as radix 8.
 #   * All others are decimal.
 # * Conversion from `String` accepts an optional sign in the string.
-# * For hexadecimal (radix 16) conversion an optional leading `"0x"`, or `"0X"` is accepted.
-# * For octal (radix 8) an optional leading `"0"` is accepted.
-# * For binary (radix 2) an optional leading `"0b"` or `"0B"` is accepted.
+# * For hexadecimal (radix 16) conversion an optional leading "0x", or "0X" is accepted.
+# * For octal (radix 8) an optional leading "0" is accepted.
+# * For binary (radix 2) an optional leading "0b" or "0B" is accepted.
 # * When `radix` is set to `default`, the conversion is based on the leading.
-#   characters in the string. A leading `"0"` for radix 8, a leading `"0x"`, or `"0X"` for
-#   radix 16, and leading `"0b"` or `"0B"` for binary.
-# * Conversion from `Boolean` results in `0` for `false` and `1` for `true`.
+#   characters in the string. A leading "0" for radix 8, a leading "0x", or "0X" for
+#   radix 16, and leading "0b" or "0B" for binary.
+# * Conversion from `Boolean` results in 0 for `false` and 1 for `true`.
 # * Conversion from `Integer`, `Float`, and `Boolean` ignores the radix.
 # * `Float` value fractions are truncated (no rounding).
 # * When `abs` is set to `true`, the result will be an absolute integer.
@@ -119,9 +119,9 @@
 # ```
 #
 # * For an integer, the floating point fraction of `.0` is added to the value.
-# * A `Boolean` `true` is converted to `1.0`, and a `false` to `0.0`.
+# * A `Boolean` `true` is converted to 1.0, and a `false` to 0.0
 # * In `String` format, integer prefixes for hex and binary are understood (but not octal since
-#   floating point in string format may start with a `'0'`).
+#   floating point in string format may start with a '0').
 # * When `abs` is set to `true`, the result will be an absolute floating point value.
 #
 # ### Conversion to Numeric
@@ -139,7 +139,7 @@
 # * If the value has a decimal period, or if given in scientific notation
 #   (e/E), the result is a `Float`, otherwise the value is an `Integer`. The
 #   conversion from `String` always uses a radix based on the prefix of the string.
-# * Conversion from `Boolean` results in `0` for `false` and `1` for `true`.
+# * Conversion from `Boolean` results in 0 for `false` and 1 for `true`.
 # * When `abs` is set to `true`, the result will be an absolute `Float`or `Integer` value.
 #
 # @example Converting to Numeric in different ways
@@ -225,7 +225,7 @@
 # )
 # ```
 #
-# The directive consists of a percent (`%`) character, zero or more flags, optional minimum field width and
+# The directive consists of a percent (%) character, zero or more flags, optional minimum field width and
 # a conversion specifier as follows:
 # ```
 # %[Flags][Width]Conversion
@@ -291,7 +291,7 @@
 # argument is omitted, an array of default formats will be used.
 #
 # A third optional timezone argument can be provided. The first argument will then be parsed as if it represents a local time in that
-# timezone. The timezone can be any timezone that is recognized when using the `'%z'` or `'%Z'` formats, or the word `'current'`, in which
+# timezone. The timezone can be any timezone that is recognized when using the '%z' or '%Z' formats, or the word 'current', in which
 # case the current timezone of the evaluating process will be used. The timezone argument is case insensitive.
 #
 # The default timezone, when no argument is provided, or when using the keyword `default`, is 'UTC'.
@@ -336,7 +336,7 @@
 # | 0     | Use zeros for padding
 # | #     | Change names to upper-case or change case of am/pm
 # | ^     | Use uppercase
-# | :     | Use colons for `%z`
+# | :     | Use colons for %z
 #
 # ##### Format directives (names and padding can be altered using flags):
 #
@@ -345,48 +345,48 @@
 # | Format | Meaning |
 # | ------ | ------- |
 # | Y | Year with century, zero-padded to at least 4 digits |
-# | C | year / 100 (rounded down such as `20` in `2009`) |
-# | y | year % 100 (`00..99`) |
-# | m | Month of the year, zero-padded (`01..12`) |
-# | B | The full month name (`"January"`) |
-# | b | The abbreviated month name (`"Jan"`) |
-# | h | Equivalent to `%b` |
-# | d | Day of the month, zero-padded (`01..31`) |
-# | e | Day of the month, blank-padded (`1..31`) |
-# | j | Day of the year (`001..366`) |
+# | C | year / 100 (rounded down such as 20 in 2009) |
+# | y | year % 100 (00..99) |
+# | m | Month of the year, zero-padded (01..12) |
+# | B | The full month name ("January") |
+# | b | The abbreviated month name ("Jan") |
+# | h | Equivalent to %b |
+# | d | Day of the month, zero-padded (01..31) |
+# | e | Day of the month, blank-padded ( 1..31) |
+# | j | Day of the year (001..366) |
 #
 # **Time (Hour, Minute, Second, Subsecond):**
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | H | Hour of the day, 24-hour clock, zero-padded (`00..23`) |
-# | k | Hour of the day, 24-hour clock, blank-padded (`0..23`) |
-# | I | Hour of the day, 12-hour clock, zero-padded (`01..12`) |
-# | l | Hour of the day, 12-hour clock, blank-padded (`1..12`) |
-# | P | Meridian indicator, lowercase (`"am"` or `"pm"`) |
-# | p | Meridian indicator, uppercase (`"AM"` or `"PM"`) |
-# | M | Minute of the hour (`00..59`) |
-# | S | Second of the minute (`00..60`) |
-# | L | Millisecond of the second (`000..999`). Digits under millisecond are truncated to not produce 1000 |
+# | H | Hour of the day, 24-hour clock, zero-padded (00..23) |
+# | k | Hour of the day, 24-hour clock, blank-padded ( 0..23) |
+# | I | Hour of the day, 12-hour clock, zero-padded (01..12) |
+# | l | Hour of the day, 12-hour clock, blank-padded ( 1..12) |
+# | P | Meridian indicator, lowercase ("am" or "pm") |
+# | p | Meridian indicator, uppercase ("AM" or "PM") |
+# | M | Minute of the hour (00..59) |
+# | S | Second of the minute (00..60) |
+# | L | Millisecond of the second (000..999). Digits under millisecond are truncated to not produce 1000 |
 # | N | Fractional seconds digits, default is 9 digits (nanosecond). Digits under a specified width are truncated to avoid carry up |
 #
 # **Time (Hour, Minute, Second, Subsecond):**
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | z   | Time zone as hour and minute offset from UTC (e.g. `+0900`) |
-# | :z  | hour and minute offset from UTC with a colon (e.g. `+09:00`) |
-# | ::z | hour, minute and second offset from UTC (e.g. `+09:00:00`) |
+# | z   | Time zone as hour and minute offset from UTC (e.g. +0900) |
+# | :z  | hour and minute offset from UTC with a colon (e.g. +09:00) |
+# | ::z | hour, minute and second offset from UTC (e.g. +09:00:00) |
 # | Z   | Abbreviated time zone name or similar information.  (OS dependent) |
 #
 # **Weekday:**
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | A | The full weekday name (`"Sunday"`) |
-# | a | The abbreviated name (`"Sun"`) |
-# | u | Day of the week (Monday is `1`, `1..7`) |
-# | w | Day of the week (Sunday is `0`, `0..6`) |
+# | A | The full weekday name ("Sunday") |
+# | a | The abbreviated name ("Sun") |
+# | u | Day of the week (Monday is 1, 1..7) |
+# | w | Day of the week (Sunday is 0, 0..6) |
 #
 # **ISO 8601 week-based year and week number:**
 #
@@ -397,8 +397,8 @@
 # | Format | Meaning |
 # | ------ | ------- |
 # | G | The week-based year |
-# | g | The last 2 digits of the week-based year (`00..99`) |
-# | V | Week number of the week-based year (`01..53`) |
+# | g | The last 2 digits of the week-based year (00..99) |
+# | V | Week number of the week-based year (01..53) |
 #
 # **Week number:**
 #
@@ -407,8 +407,8 @@
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | U | Week number of the year. The week starts with Sunday. (`00..53`) |
-# | W | Week number of the year. The week starts with Monday. (`00..53`) |
+# | U | Week number of the year. The week starts with Sunday. (00..53) |
+# | W | Week number of the year. The week starts with Monday. (00..53) |
 #
 # **Seconds since the Epoch:**
 #
@@ -419,23 +419,23 @@
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | n | Newline character (`\n`) |
-# | t | Tab character (`\t`) |
-# | % | Literal `%` character |
+# | n | Newline character (\n) |
+# | t | Tab character (\t) |
+# | % | Literal "%" character |
 #
 # **Combination:**
 #
 # | Format | Meaning |
 # | ------ | ------- |
-# | c | date and time (`%a %b %e %T %Y`) |
-# | D | Date (`%m/%d/%y`) |
-# | F | The ISO 8601 date format (`%Y-%m-%d`) |
-# | v | VMS date (`%e-%^b-%4Y`) |
-# | x | Same as `%D` |
-# | X | Same as `%T` |
-# | r | 12-hour time (`%I:%M:%S %p`) |
-# | R | 24-hour time (`%H:%M`) |
-# | T | 24-hour time (`%H:%M:%S`) |
+# | c | date and time (%a %b %e %T %Y) |
+# | D | Date (%m/%d/%y) |
+# | F | The ISO 8601 date format (%Y-%m-%d) |
+# | v | VMS date (%e-%^b-%4Y) |
+# | x | Same as %D |
+# | X | Same as %T |
+# | r | 12-hour time (%I:%M:%S %p) |
+# | R | 24-hour time (%H:%M) |
+# | T | 24-hour time (%H:%M:%S) |
 #
 # The default array contains the following patterns:
 #
@@ -489,7 +489,7 @@
 # The mapping from data type to format is referred to as the *format map*. This map
 # allows different formatting depending on type.
 #
-# @example Positive Integers in Hexadecimal prefixed with `'0x'`, negative in Decimal
+# @example Positive Integers in Hexadecimal prefixed with '0x', negative in Decimal
 #
 # ```puppet
 # $format_map = {
@@ -578,13 +578,13 @@
 #
 # | Format  | Integer Formats
 # | ------  | ---------------
-# | d       | Decimal, negative values produces leading `-`.
-# | x X     | Hexadecimal in lower or upper case. Uses `..f/..F` for negative values unless `+` is also used. A `#` adds prefix `0x/0X`.
-# | o       | Octal. Uses `..0` for negative values unless `+` is also used. A `#` adds prefix `0`.
-# | b B     | Binary with prefix `b` or `B`. Uses `..1/..1` for negative values unless `+` is also used.
-# | c       | Numeric value representing a Unicode value, result is a one unicode character string, quoted if alternative flag `#` is used
-# | s       | Same as `d`, or `d` in quotes if alternative flag `#` is used.
-# | p       | Same as `d`.
+# | d       | Decimal, negative values produces leading '-'.
+# | x X     | Hexadecimal in lower or upper case. Uses ..f/..F for negative values unless + is also used. A `#` adds prefix 0x/0X.
+# | o       | Octal. Uses ..0 for negative values unless `+` is also used. A `#` adds prefix 0.
+# | b B     | Binary with prefix 'b' or 'B'. Uses ..1/..1 for negative values unless `+` is also used.
+# | c       | Numeric value representing a Unicode value, result is a one unicode character string, quoted if alternative flag # is used
+# | s       | Same as d, or d in quotes if alternative flag # is used.
+# | p       | Same as d.
 # | eEfgGaA | Converts integer to float and formats using the floating point rules.
 #
 # Defaults to `d`.
@@ -594,11 +594,11 @@
 # | Format  | Float formats
 # | ------  | -------------
 # | f       | Floating point in non exponential notation.
-# | e E     | Exponential notation with `e` or `E`.
-# | g G     | Conditional exponential with `e` or `E` if exponent `< -4` or `>=` the precision.
-# | a A     | Hexadecimal exponential form, using `x`/`X` as prefix and `p`/`P` before exponent.
-# | s       | Converted to string using format `p`, then applying string formatting rule, alternate form `#`` quotes result.
-# | p       | Same as `f` format with minimum significant number of fractional digits, prec has no effect.
+# | e E     | Exponential notation with 'e' or 'E'.
+# | g G     | Conditional exponential with 'e' or 'E' if exponent < -4 or >= the precision.
+# | a A     | Hexadecimal exponential form, using 'x'/'X' as prefix and 'p'/'P' before exponent.
+# | s       | Converted to string using format p, then applying string formatting rule, alternate form # quotes result.
+# | p       | Same as f format with minimum significant number of fractional digits, prec has no effect.
 # | dxXobBc | Converts float to integer and formats using the integer rules.
 #
 # Defaults to `p`.
@@ -621,12 +621,12 @@
 #
 # | Format    | Boolean Formats
 # | ----      | -------------------
-# | t T       | String `'true'/'false'` or `'True'/'False'`, first char if alternate form is used (i.e. `'t'/'f'` or `'T'/'F'`).
-# | y Y       | String `'yes'/'no'`, `'Yes'/'No'`, `'y'/'n'` or `'Y'/'N'` if alternative flag `#` is used.
-# | dxXobB    | Numeric value `0/1` in accordance with the given format which must be valid integer format.
-# | eEfgGaA   | Numeric value `0.0/1.0` in accordance with the given float format and flags.
-# | s         | String `'true'` / `'false'`.
-# | p         | String `'true'` / `'false'`.
+# | t T       | String 'true'/'false' or 'True'/'False', first char if alternate form is used (i.e. 't'/'f' or 'T'/'F').
+# | y Y       | String 'yes'/'no', 'Yes'/'No', 'y'/'n' or 'Y'/'N' if alternative flag `#` is used.
+# | dxXobB    | Numeric value 0/1 in accordance with the given format which must be valid integer format.
+# | eEfgGaA   | Numeric value 0.0/1.0 in accordance with the given float format and flags.
+# | s         | String 'true' / 'false'.
+# | p         | String 'true' / 'false'.
 #
 # **Regexp to String**
 #
@@ -640,33 +640,33 @@
 # | Format    | Undef formats
 # | ------    | -------------
 # | s         | Empty string, or quoted empty string if alternative flag `#` is used.
-# | p         | String `'undef'`, or quoted `'"undef"'` if alternative flag `#` is used.
-# | n         | String `'nil'`, or `'null'` if alternative flag `#` is used.
-# | dxXobB    | String `'NaN'`.
-# | eEfgGaA   | String `'NaN'`.
-# | v         | String `'n/a'`.
-# | V         | String `'N/A'`.
-# | u         | String `'undef'`, or `'undefined'` if alternative `#` flag is used.
+# | p         | String 'undef', or quoted '"undef"' if alternative flag `#` is used.
+# | n         | String 'nil', or 'null' if alternative flag `#` is used.
+# | dxXobB    | String 'NaN'.
+# | eEfgGaA   | String 'NaN'.
+# | v         | String 'n/a'.
+# | V         | String 'N/A'.
+# | u         | String 'undef', or 'undefined' if alternative `#` flag is used.
 #
 # **Default value to String**
 #
 # | Format    | Default formats
 # | ------    | ---------------
-# | d D       | String `'default'` or `'Default'`, alternative form `#` causes value to be quoted.
-# | s         | Same as `d`.
-# | p         | Same as `d`.
+# | d D       | String 'default' or 'Default', alternative form `#` causes value to be quoted.
+# | s         | Same as d.
+# | p         | Same as d.
 #
 # **Binary value to String**
 #
 # | Format    | Default formats
 # | ------    | ---------------
 # | s         | binary as unquoted UTF-8 characters (errors if byte sequence is invalid UTF-8). Alternate form escapes non ascii bytes.
-# | p         | `'Binary("<base64strict>")'`
-# | b         | `'<base64>'` - base64 string with newlines inserted
-# | B         | `'<base64strict>'` - base64 strict string (without newlines inserted)
-# | u         | `'<base64urlsafe>'` - base64 urlsafe string
-# | t         | `'Binary'` - outputs the name of the type only
-# | T         | `'BINARY'` - output the name of the type in all caps only
+# | p         | 'Binary("<base64strict>")'
+# | b         | '<base64>' - base64 string with newlines inserted
+# | B         | '<base64strict>' - base64 strict string (without newlines inserted)
+# | u         | '<base64urlsafe>' - base64 urlsafe string
+# | t         | 'Binary' - outputs the name of the type only
+# | T         | 'BINARY' - output the name of the type in all caps only
 #
 # * The alternate form flag `#` will quote the binary or base64 text output.
 # * The format `%#s` allows invalid UTF-8 characters and outputs all non ascii bytes
@@ -678,8 +678,8 @@
 # | Format    | Array/Tuple Formats
 # | ------    | -------------
 # | a         | Formats with `[ ]` delimiters and `,`, alternate form `#` indents nested arrays/hashes.
-# | s         | Same as `a`.
-# | p         | Same as `a`.
+# | s         | Same as a.
+# | p         | Same as a.
 #
 # See "Flags" `<[({\|` for formatting of delimiters, and "Additional parameters for containers; Array and Hash" for
 # more information about options.
@@ -695,7 +695,7 @@
 # | h         | Formats with `{ }` delimiters, `,` element separator and ` => ` inner element separator unless overridden by flags.
 # | s         | Same as h.
 # | p         | Same as h.
-# | a         | Converts the hash to an array of `[k,v]` tuples and formats it using array rule(s).
+# | a         | Converts the hash to an array of [k,v] tuples and formats it using array rule(s).
 #
 # See "Flags" `<[({\|` for formatting of delimiters, and "Additional parameters for containers; Array and Hash" for
 # more information about options.
@@ -714,18 +714,18 @@
 # | Flag     | Effect
 # | ------   | ------
 # | (space)  | A space instead of `+` for numeric output (`-` is shown), for containers skips delimiters.
-# | #        | Alternate format; prefix `0x/0x`, `0` (octal) and `0b/0B` for binary, Floats force decimal '.'. For g/G keep trailing `0`.
-# | +        | Show sign `+/-` depending on value's sign, changes `x`, `X`, `o`, `b`, `B` format to not use 2's complement form.
+# | #        | Alternate format; prefix 0x/0x, 0 (octal) and 0b/0B for binary, Floats force decimal '.'. For g/G keep trailing 0.
+# | +        | Show sign +/- depending on value's sign, changes x, X, o, b, B format to not use 2's complement form.
 # | -        | Left justify the value in the given width.
-# | 0        | Pad with `0` instead of space for widths larger than value.
-# | <[({\|   | Defines an enclosing pair `<> [] () {} or \| \|` when used with a container type.
+# | 0        | Pad with 0 instead of space for widths larger than value.
+# | <[({\|   | Defines an enclosing pair <> [] () {} or \| \| when used with a container type.
 #
 # ### Conversion to Boolean
 #
 # Accepts a single value as argument:
 #
-# * Float `0.0` is `false`, all other float values are `true`
-# * Integer `0` is `false`, all other integer values are `true`
+# * Float 0.0 is `false`, all other float values are `true`
+# * Integer 0 is `false`, all other integer values are `true`
 # * Strings
 #   * `true` if 'true', 'yes', 'y' (case independent compare)
 #   * `false` if 'false', 'no', 'n' (case independent compare)
@@ -840,7 +840,7 @@
 # function SemVer.new(SemVerHash $hash_args)
 # ```
 #
-# @example `SemVer` and `SemVerRange` usage
+# @example SemVer and SemVerRange usage
 #
 # ```puppet
 # # As a type, SemVer can describe disjunct ranges which versions can be
@@ -856,7 +856,7 @@
 # notice(SemVer('3.4.5') =~ $t) # true
 # ```
 #
-# ### Creating a `SemVerRange`
+# ### Creating a SemVerRange
 #
 # A `SemVerRange` object represents a range of `SemVer`. It can be created from
 # a `String`, or from two `SemVer` instances, where either end can be given as

data/lib/puppet/functions/next.rb

@@ -1,25 +1,8 @@
 # Makes iteration continue with the next value, optionally with a given value for this iteration.
 # If a value is not given it defaults to `undef`
-# 
-# @example Using the `next()` function
-#
-# ```puppet
-# $data = ['a','b','c']
-# $data.each |Integer $index, String $value| {
-#   if $index == 1 {
-#     next()
-#   }
-#   notice ("${index} = ${value}")
-# }
-# ```
-#
-# Would notice:
-# ```
-# Notice: Scope(Class[main]): 0 = a
-# Notice: Scope(Class[main]): 2 = c
-# ```
 #
 # @since 4.7.0
+#
 Puppet::Functions.create_function(:next) do
   dispatch :next_impl do
     optional_param 'Any', :value