puppet 6.14.0-universal-darwin → 6.19.0-universal-darwin

data/man/man5/puppet.conf.5

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPETCONF" "5" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPETCONF" "5" "October 2020" "Puppet, Inc." "Puppet manual"
 \fBThis page is autogenerated; any changes will get overwritten\fR
 .
 .SH "Configuration settings"
@@ -149,7 +149,7 @@ The name to use the Certificate Authority certificate\.
 The port to use for the certificate authority\.
 .
 .IP "\(bu" 4
-\fIDefault\fR: $masterport
+\fIDefault\fR: $serverport
 .
 .IP "" 0
 .
@@ -275,6 +275,9 @@ For best compatibility, you should limit the value of \fBcertname\fR to only use
 .IP "\(bu" 4
 The special value \fBca\fR is reserved, and can\'t be used as the certname for a normal node\.
 .
+.IP
+\fBNote:\fR You must set the certname in the main section of the puppet\.conf file\. Setting it in a different section causes errors\.
+.
 .IP "" 0
 .
 .P
@@ -329,7 +332,7 @@ The main Puppet code directory\. The default for this setting is calculated base
 .IP "" 0
 .
 .SS "color"
-Whether to use colors when logging to the console\. Valid values are \fBansi\fR (equivalent to \fBtrue\fR), \fBhtml\fR, and \fBfalse\fR, which produces no color\. Defaults to false on Windows, as its console does not support ansi colors\.
+Whether to use colors when logging to the console\. Valid values are \fBansi\fR (equivalent to \fBtrue\fR), \fBhtml\fR, and \fBfalse\fR, which produces no color\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: ansi
@@ -588,30 +591,38 @@ The name of a registered environment data provider used when obtaining environme
 
 .
 .SS "environment_timeout"
-How long the Puppet master should cache data it loads from an environment\.
+How long the Puppet server should cache data it loads from an environment\.
 .
 .P
-A value of \fB0\fR will disable caching\. This setting can also be set to \fBunlimited\fR, which will cache environments until the master is restarted or told to refresh the cache\.
+A value of \fB0\fR will disable caching\. This setting can also be set to \fBunlimited\fR, which will cache environments until the server is restarted or told to refresh the cache\. All other values will result in Puppet server evicting expired environments\. The expiration time is computed based on either when the environment was created or last accessed, see \fBenvironment_timeout_mode\fR\.
 .
 .P
-You should change this setting once your Puppet deployment is doing non\-trivial work\. We chose the default value of \fB0\fR because it lets new users update their code without any extra steps, but it lowers the performance of your Puppet master\.
+You should change this setting once your Puppet deployment is doing non\-trivial work\. We chose the default value of \fB0\fR because it lets new users update their code without any extra steps, but it lowers the performance of your Puppet server\. We recommend either:
 .
-.P
-We recommend setting this to \fBunlimited\fR and explicitly refreshing your Puppet master as part of your code deployment process\.
+.IP "\(bu" 4
+Setting this to \fBunlimited\fR and explicitly refreshing your Puppet server as part of your code deployment process\.
 .
 .IP "\(bu" 4
-With Puppet Server, you should refresh environments by calling the \fBenvironment\-cache\fR API endpoint\. See the docs for the Puppet Server administrative API \fIhttps://puppet\.com/docs/puppetserver/latest/admin\-api/v1/environment\-cache\.html\fR\.
+Setting this to a number that will keep your most actively used environments cached, but allow testing environments to fall out of the cache and reduce memory usage\. A value of 3 minutes (3m) is a reasonable value\. This option requires setting \fBenvironment_timeout_mode\fR to \fBfrom_last_used\fR\.
 .
 .IP "" 0
 .
 .P
-Any value other than \fB0\fR or \fBunlimited\fR is deprecated, since most Puppet servers use a pool of Ruby interpreters which all have their own cache timers\. When these timers drift out of sync, agents can be served inconsistent catalogs\.
+Once you set \fBenvironment_timeout\fR to a non\-zero value, you need to tell Puppet server to read new code from disk using the \fBenvironment\-cache\fR API endpoint after you deploy new code\. See the docs for the Puppet Server administrative API \fIhttps://puppet\.com/docs/puppetserver/latest/admin\-api/v1/environment\-cache\.html\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 0
 .
 .IP "" 0
 .
+.SS "environment_timeout_mode"
+How Puppet interprets the \fBenvironment_timeout\fR setting when \fBenvironment_timeout\fR is neither \fB0\fR nor \fBunlimited\fR\. If set to \fBfrom_created\fR, then the environment will be evicted \fBenvironment_timeout\fR seconds from when it was created\. If set to \fBfrom_last_used\fR then the environment will be evicted \fBenvironment_timeout\fR seconds from when it was last used\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: from_created
+.
+.IP "" 0
+.
 .SS "environmentpath"
 A search path for directory environments, as a list of directories separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
@@ -794,7 +805,7 @@ The group Puppet Server will run as\. Used to ensure the agent side processes (a
 .IP "" 0
 .
 .SS "hiera_config"
-The hiera configuration file\. Puppet only reads this file on startup, so you must restart the puppet master every time you edit it\.
+The hiera configuration file\. Puppet only reads this file on startup, so you must restart the puppet server every time you edit it\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/hiera\.yaml\. However, for backwards compatibility, if a file exists at $codedir/hiera\.yaml, Puppet uses that instead\.
@@ -920,7 +931,15 @@ The time to wait for data to be read from an HTTP connection\. If nothing is rea
 The HTTP User\-Agent string to send when making network requests\.
 .
 .IP "\(bu" 4
-\fIDefault\fR: Puppet/6\.14\.0 Ruby/2\.4\.1\-p111 (x86_64\-linux)
+\fIDefault\fR: Puppet/6\.19\.0 Ruby/2\.5\.1\-p57 (x86_64\-linux)
+.
+.IP "" 0
+.
+.SS "ignore_plugin_errors"
+Whether the puppet run should ignore errors during pluginsync\. If the setting is false and there are errors during pluginsync, then the agent will abort the run and submit a report containing information about the failed run\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: true
 .
 .IP "" 0
 .
@@ -1198,6 +1217,14 @@ The maximum amount of time the Puppet agent should wait for its certificate requ
 .
 .IP "" 0
 .
+.SS "maxwaitforlock"
+The maximum amount of time the puppet agent should wait for an already running puppet agent to finish before starting a new one\. This is set by default to 1 minute\. A value of \fBunlimited\fR will cause puppet agent to wait indefinitely\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: 1m
+.
+.IP "" 0
+.
 .SS "merge_dependency_warnings"
 Whether to merge class\-level dependency failure warnings\.
 .
@@ -1369,7 +1396,7 @@ Where puppet agent stores the password for its private key\. Generally unused\.
 The shell search path\. Defaults to whatever is inherited from the parent process\.
 .
 .P
-This setting can only be set in the \fB[main]\fR section of puppet\.conf; it cannot be set in \fB[master]\fR, \fB[agent]\fR, or an environment config section\.
+This setting can only be set in the \fB[main]\fR section of puppet\.conf; it cannot be set in \fB[server]\fR, \fB[agent]\fR, or an environment config section\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
@@ -1424,6 +1451,14 @@ From where to retrieve plugins\. The standard Puppet \fBfile\fR type is used for
 .
 .IP "" 0
 .
+.SS "pluginsync"
+Whether plugins should be synced with the central server\. This setting is deprecated\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: true
+.
+.IP "" 0
+.
 .SS "postrun_command"
 A command to run after every agent run\. If this command returns a non\-zero return code, the entire Puppet run will be considered to have failed, even though it might have performed work during the normal run\.
 .
@@ -1515,11 +1550,19 @@ Whether to send reports after every transaction\.
 .
 .IP "" 0
 .
+.SS "report_include_system_store"
+Whether the \'http\' report processor should include the system certificate store when submitting reports to HTTPS URLs\. If false, then the \'http\' processor will only trust HTTPS report servers whose certificates are issued by the puppet CA or one of its intermediate CAs\. If true, the processor will additionally trust CA certificates in the system\'s certificate store\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: false
+.
+.IP "" 0
+.
 .SS "report_port"
 The port to communicate with the report_server\.
 .
 .IP "\(bu" 4
-\fIDefault\fR: $masterport
+\fIDefault\fR: $serverport
 .
 .IP "" 0
 .
@@ -1586,7 +1629,7 @@ The configuration file that defines the rights to the different rest indirection
 .IP "" 0
 .
 .SS "resubmit_facts"
-Whether to send updated facts after every transaction\.
+Whether to send updated facts after every transaction\. By default puppet only submits facts at the beginning of the transaction before applying a catalog\. Since puppet can modify the state of the system, the value of the facts may change after puppet finishes\. Therefore, any facts stored in puppetdb may not be consistent until the agent next runs, typically in 30 minutes\. If this feature is enabled, puppet will resubmit facts after applying its catalog, ensuring facts for the node stored in puppetdb are current\. However, this will double the fact submission load on puppetdb, so it is disabled by default\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
@@ -1618,7 +1661,7 @@ Where Puppet PID files are kept\.
 .IP "" 0
 .
 .SS "runinterval"
-How often puppet agent applies the catalog\. Note that a runinterval of 0 means "run continuously" rather than "never run\." If you want puppet agent to never run, you should start it with the \fB\-\-no\-client\fR option\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
+How often puppet agent applies the catalog\. Note that a runinterval of 0 means "run continuously" rather than "never run\." This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 30m
@@ -1665,6 +1708,14 @@ The list of puppet master servers to which the puppet agent should connect, in t
 .
 .IP "" 0
 .
+.SS "serverport"
+The default port puppet subcommands use to communicate with Puppet Server\. (eg \fBpuppet facts upload\fR, \fBpuppet agent\fR)\. May be overridden by more specific settings (see \fBca_port\fR, \fBreport_port\fR)\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: 8140
+.
+.IP "" 0
+.
 .SS "show_diff"
 Whether to log and report a contextual diff when files are being replaced\. This causes partial file contents to pass through Puppet\'s normal logging and reporting system, so this setting should be used with caution if you are sending Puppet\'s reports to an insecure destination\. This feature currently requires the \fBdiff/lcs\fR Ruby library\.
 .
@@ -1767,6 +1818,13 @@ The setting is deprecated and has no effect\. Ensure all root and intermediate c
 .TP
 \fIDefault\fR:
 
+.
+.SS "ssl_trust_store"
+A file containing CA certificates in PEM format that puppet should trust when making HTTPS requests\. This \fBonly\fR applies to https requests to non\-puppet infrastructure, such as retrieving file metadata and content from https file sources, puppet module tool and the \'http\' report processor\. This setting is ignored when making requests to puppet:// URLs such as catalog and report requests\.
+.
+.TP
+\fIDefault\fR:
+
 .
 .SS "ssldir"
 Where SSL certificates are kept\.
@@ -1937,7 +1995,7 @@ Transactional storage file for persisting data between transactions for the purp
 .IP "" 0
 .
 .SS "trusted_external_command"
-The external trusted facts script to use\. This setting\'s value can be set to the path to an executable command that can produce external trusted facts\. The command must:
+The external trusted facts script or directory to use\. This setting\'s value can be set to the path to an executable command that can produce external trusted facts or to a directory containing those executable commands\. The command(s) must:
 .
 .IP "\(bu" 4
 Take the name of a node as a command\-line argument\.
@@ -1948,10 +2006,14 @@ Return a JSON hash with the external trusted facts for this node\.
 .IP "\(bu" 4
 For unknown or invalid nodes, exit with a non\-zero exit code\.
 .
-.IP "\(bu" 4
-\fIDefault\fR:
-.
 .IP "" 0
+.
+.P
+If the setting points to an executable command, then the external trusted facts will be stored in the \'external\' key of the trusted facts hash\. Otherwise for each executable file in the directory, the external trusted facts will be stored in the \fB<basename>\fR key of the \fBtrusted[\'external\']\fR hash\. For example, if the files foo\.rb and bar\.sh are in the directory, then \fBtrusted[\'external\']\fR will be the hash \fB{ \'foo\' => <foo\.rb output>, \'bar\' => <bar\.sh output> }\fR\.
+.
+.TP
+\fIDefault\fR:
+
 .
 .SS "trusted_oid_mapping_file"
 File that provides mapping between custom SSL oids and user\-friendly names
@@ -2031,6 +2093,17 @@ Puppet agent cannot apply configurations until its approved certificate is avail
 .
 .IP "" 0
 .
+.SS "waitforlock"
+How frequently puppet agent should try running when there is an already ongoing puppet agent instance\.
+.
+.P
+This argument is by default disabled (value set to 0)\. In this case puppet agent will immediately exit if it cannot run at that moment\. When a value other than 0 is set, this can also be used in combination with the \fBmaxwaitforlock\fR argument\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
+.
+.IP "\(bu" 4
+\fIDefault\fR: 0
+.
+.IP "" 0
+.
 .SS "yamldir"
 The directory in which YAML data is stored, usually in a subdirectory\.
 .

data/man/man8/puppet-agent.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-AGENT" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-AGENT" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-agent\fR \- The puppet agent daemon
@@ -13,7 +13,7 @@ Retrieves the client configuration from the Puppet master and applies it to the
 This service may be run as a daemon, run periodically using cron (or something similar), or run interactively for testing purposes\.
 .
 .SH "USAGE"
-puppet agent [\-\-certname \fINAME\fR] [\-D|\-\-daemonize|\-\-no\-daemonize] [\-d|\-\-debug] [\-\-detailed\-exitcodes] [\-\-digest \fIDIGEST\fR] [\-\-disable [MESSAGE]] [\-\-enable] [\-\-fingerprint] [\-h|\-\-help] [\-l|\-\-logdest syslog|eventlog|\fIABS FILEPATH\fR|console] [\-\-masterport \fIPORT\fR] [\-\-noop] [\-o|\-\-onetime] [\-\-sourceaddress \fIIP_ADDRESS\fR] [\-t|\-\-test] [\-v|\-\-verbose] [\-V|\-\-version] [\-w|\-\-waitforcert \fISECONDS\fR]
+puppet agent [\-\-certname \fINAME\fR] [\-D|\-\-daemonize|\-\-no\-daemonize] [\-d|\-\-debug] [\-\-detailed\-exitcodes] [\-\-digest \fIDIGEST\fR] [\-\-disable [MESSAGE]] [\-\-enable] [\-\-fingerprint] [\-h|\-\-help] [\-l|\-\-logdest syslog|eventlog|\fIABS FILEPATH\fR|console] [\-\-serverport \fIPORT\fR] [\-\-noop] [\-o|\-\-onetime] [\-\-sourceaddress \fIIP_ADDRESS\fR] [\-t|\-\-test] [\-v|\-\-verbose] [\-V|\-\-version] [\-w|\-\-waitforcert \fISECONDS\fR]
 .
 .SH "DESCRIPTION"
 This is the main puppet client\. Its job is to retrieve the local machine\'s configuration from a remote server and apply it\. In order to successfully communicate with the remote server, the client must have a certificate signed by a certificate authority that the server trusts; the recommended method for this, at the moment, is to run a certificate authority as part of the puppet server (which is the default)\. The client will connect and request a signed certificate, and will continue connecting until it receives one\.
@@ -123,7 +123,7 @@ Disable can also take an optional message that will be reported by the \'puppet
 \-\-help: Print this help message
 .
 .IP "\(bu" 4
-\-\-job\-id: Attach the specified job id to the catalog request and the report used for this agent run\. This option only works when \'\-\-onetime\' is used\.
+\-\-job\-id: Attach the specified job id to the catalog request and the report used for this agent run\. This option only works when \'\-\-onetime\' is used\. When using Puppet Enterprise this flag should not be used as the orchestrator sets the job\-id for you and it must be unique\.
 .
 .IP "\(bu" 4
 \-\-logdest: Where to send log messages\. Choose between \'syslog\' (the POSIX syslog service), \'eventlog\' (the Windows Event Log), \'console\', or the path to a log file\. If debugging or verbosity is enabled, this defaults to \'console\'\. Otherwise, it defaults to \'syslog\' on POSIX systems and \'eventlog\' on Windows\.
@@ -135,7 +135,7 @@ A path ending with \'\.json\' will receive structured output in JSON format\. Th
 A path ending with \'\.jsonl\' will receive structured output in JSON Lines format\.
 .
 .IP "\(bu" 4
-\-\-masterport: The port on which to contact the puppet master\. (This is a Puppet setting, and can go in puppet\.conf\.)
+\-\-masterport: The port on which to contact the Puppet Server\. (This is a Puppet setting, and can go in puppet\.conf\. Deprecated in favor of the \'serverport\' setting\.)
 .
 .IP "\(bu" 4
 \-\-noop: Use \'noop\' mode where the daemon runs in a no\-op or dry\-run mode\. This is useful for seeing what changes Puppet would make without actually executing the changes\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
@@ -144,6 +144,9 @@ A path ending with \'\.jsonl\' will receive structured output in JSON Lines form
 \-\-onetime: Run the configuration once\. Runs a single (normally daemonized) Puppet run\. Useful for interactively running puppet agent when used in conjunction with the \-\-no\-daemonize option\. (This is a Puppet setting, and can go in puppet\.conf\. Note the special \'no\-\' prefix for boolean settings on the command line\.)
 .
 .IP "\(bu" 4
+\-\-serverport: The port on which to contact the Puppet Server\. (This is a Puppet setting, and can go in puppet\.conf\.)
+.
+.IP "\(bu" 4
 \-\-sourceaddress: Set the source IP address for transactions\. This defaults to automatically selected\. (This is a Puppet setting, and can go in puppet\.conf\.)
 .
 .IP "\(bu" 4

data/man/man8/puppet-apply.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-APPLY" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-APPLY" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-apply\fR \- Apply Puppet manifests locally

data/man/man8/puppet-catalog.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-CATALOG" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-CATALOG" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-catalog\fR \- Compile, save, view, and convert catalogs\.

data/man/man8/puppet-config.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-CONFIG" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-CONFIG" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-config\fR \- Interact with Puppet\'s settings\.
@@ -35,7 +35,7 @@ Whether to log debug information\.
 The section of the puppet\.conf configuration file to interact with\.
 .
 .IP
-The three most commonly used sections are \'main\', \'master\', and \'agent\'\. \'Main\' is the default, and is used by all Puppet applications\. Other sections can override \'main\' values for specific applications \-\-\- the \'master\' section affects Puppet Server, and the \'agent\' section affects puppet agent\.
+The three most commonly used sections are \'main\', \'server\', and \'agent\'\. \'Main\' is the default, and is used by all Puppet applications\. Other sections can override \'main\' values for specific applications \-\-\- the \'server\' section affects Puppet Server, and the \'agent\' section affects puppet agent\.
 .
 .IP
 Less commonly used is the \'user\' section, which affects puppet apply\. Any other section will be treated as the name of a legacy environment (a deprecated feature), and can only include the \'manifest\' and \'modulepath\' settings\.
@@ -112,10 +112,10 @@ Delete the setting \'setting_name\' from the \'main\' configuration domain:
 $ puppet config delete setting_name
 .
 .P
-Delete the setting \'setting_name\' from the \'master\' configuration domain:
+Delete the setting \'setting_name\' from the \'server\' configuration domain:
 .
 .P
-$ puppet config delete setting_name \-\-section master
+$ puppet config delete setting_name \-\-section server
 .
 .P
 \fBprint\fR
@@ -127,10 +127,10 @@ Get puppet\'s runfile directory:
 $ puppet config print rundir
 .
 .P
-Get a list of important directories from the master\'s config:
+Get a list of important directories from the server\'s config:
 .
 .P
-$ puppet config print all \-\-section master | grep \-E "(path|dir)"
+$ puppet config print all \-\-section server | grep \-E "(path|dir)"
 .
 .P
 \fBset\fR

data/man/man8/puppet-describe.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DESCRIBE" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DESCRIBE" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-describe\fR \- Display help about resource types

data/man/man8/puppet-device.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DEVICE" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DEVICE" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-device\fR \- Manage remote network devices

data/man/man8/puppet-doc.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-DOC" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-DOC" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-doc\fR \- Generate Puppet references

data/man/man8/puppet-epp.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-EPP" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-EPP" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-epp\fR \- Interact directly with the EPP template parser/renderer\.

data/man/man8/puppet-facts.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-FACTS" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-FACTS" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-facts\fR \- Retrieve and store facts\.

data/man/man8/puppet-filebucket.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-FILEBUCKET" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-FILEBUCKET" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-filebucket\fR \- Store and retrieve files in a filebucket

data/man/man8/puppet-generate.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-GENERATE" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-GENERATE" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-generate\fR \- Generates Puppet code from Ruby definitions\.

data/man/man8/puppet-help.8

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "PUPPET\-HELP" "8" "March 2020" "Puppet, Inc." "Puppet manual"
+.TH "PUPPET\-HELP" "8" "October 2020" "Puppet, Inc." "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-help\fR \- Display Puppet help\.
@@ -34,7 +34,7 @@ Whether to log debug information\.
 \fBSYNOPSIS\fR
 .
 .IP
-puppet help [\-\-version VERSION] [\fIsubcommand\fR] [\fIaction\fR]
+puppet help [\-\-version VERSION] [\-\-ronn] [\fIsubcommand\fR] [\fIaction\fR]
 .
 .IP
 \fBDESCRIPTION\fR
@@ -43,7 +43,10 @@ puppet help [\-\-version VERSION] [\fIsubcommand\fR] [\fIaction\fR]
 Display help about Puppet subcommands and their actions\.
 .
 .IP
-\fBOPTIONS\fR \fI\-\-version VERSION\fR \- The version of the subcommand for which to show help\.
+\fBOPTIONS\fR \fI\-\-ronn\fR \- Whether to render the help text in ronn format\.
+.
+.IP
+\fI\-\-version VERSION\fR \- The version of the subcommand for which to show help\.
 .
 .IP
 \fBRETURNS\fR