puppet 4.1.0 → 4.10.0

data/man/man8/puppet-agent.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-AGENT" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -37,7 +37,7 @@ Some flags are meant specifically for interactive use \-\- in particular, \'test
 Note that any Puppet setting that\'s valid in the configuration file is also a valid long argument\. For example, \'server\' is a valid setting, so you can specify \'\-\-server \fIservername\fR\' as an argument\. Boolean settings translate into \'\-\-setting\' and \'\-\-no\-setting\' pairs\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable settings\. A commented list of all settings can also be generated by running puppet agent with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable settings\. A commented list of all settings can also be generated by running puppet agent with \'\-\-genconfig\'\.
 .
 .TP
 \-\-certname

data/man/man8/puppet-apply.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-APPLY" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -25,7 +25,7 @@ Most users should use \'puppet agent\' and \'puppet master\' for site\-wide mani
 Note that any setting that\'s valid in the configuration file is also a valid long argument\. For example, \'tags\' is a valid setting, so you can specify \'\-\-tags \fIclass\fR,\fItag\fR\' as an argument\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
 .
 .IP "\(bu" 4
 \-\-debug: Enable full debugging\.

data/man/man8/puppet-ca.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CA" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -19,7 +19,7 @@ You can use this subcommand to sign outstanding certificate requests, list and m
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-catalog.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CATALOG" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand deals with catalogs, which are compiled per\-node artifacts gene
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-cert.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CERT" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -58,7 +58,7 @@ Build an inventory of the issued certificates\. This will destroy the current in
 Note that any setting that\'s valid in the configuration file is also a valid long argument\. For example, \'ssldir\' is a valid setting, so you can specify \'\-\-ssldir \fIdirectory\fR\' as an argument\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet cert with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet cert with \'\-\-genconfig\'\.
 .
 .TP
 \-\-all

data/man/man8/puppet-certificate.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CERTIFICATE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand interacts with a local or remote Puppet certificate authority\.
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-certificate_request.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CERTIFICATE_REQUEST" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand retrieves and submits certificate signing requests (CSRs)\.
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-certificate_revocation_list.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CERTIFICATE_REVOCATION_LIST" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand is primarily for retrieving the certificate revocation list from
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-config.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CONFIG" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -10,13 +10,13 @@
 puppet config \fIaction\fR [\-\-section SECTION_NAME]
 .
 .SH "DESCRIPTION"
-This subcommand can inspect and modify settings from Puppet\'s \'puppet\.conf\' configuration file\. For documentation about individual settings, see http://docs\.puppetlabs\.com/references/latest/configuration\.html\.
+This subcommand can inspect and modify settings from Puppet\'s \'puppet\.conf\' configuration file\. For documentation about individual settings, see https://docs\.puppetlabs\.com/references/latest/configuration\.html\.
 .
 .SH "OPTIONS"
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-describe.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-DESCRIBE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .

data/man/man8/puppet-device.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-DEVICE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .

data/man/man8/puppet-doc.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-DOC" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .

data/man/man8/puppet-epp.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-EPP" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -13,7 +13,7 @@ puppet epp \fIaction\fR
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-facts.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-FACTS" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand manages facts, which are collections of normalized system inform
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-file.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-FILE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand interacts with objects stored in a local or remote filebucket\.
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-filebucket.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-FILEBUCKET" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -34,7 +34,7 @@ Note that \'filebucket\' defaults to using a network\-based filebucket available
 Note that any setting that\'s valid in the configuration file is also a valid long argument\. For example, \'ssldir\' is a valid setting, so you can specify \'\-\-ssldir \fIdirectory\fR\' as an argument\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
 .
 .TP
 \-\-debug

data/man/man8/puppet-help.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-HELP" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -13,7 +13,7 @@ puppet help \fIaction\fR
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-inspect.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-INSPECT" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -19,7 +19,7 @@ This command uses the cached catalog from the previous run of \'puppet agent\' t
 Puppet inspect does not run as a daemon, and must be run manually or from cron\.
 .
 .SH "OPTIONS"
-Any configuration setting which is valid in the configuration file is also a valid long argument, e\.g\. \'\-\-server=master\.domain\.com\'\. See the configuration file documentation at http://docs\.puppetlabs\.com/references/latest/configuration\.html for the full list of acceptable settings\.
+Any configuration setting which is valid in the configuration file is also a valid long argument, e\.g\. \'\-\-server=master\.domain\.com\'\. See the configuration file documentation at https://docs\.puppetlabs\.com/references/latest/configuration\.html for the full list of acceptable settings\.
 .
 .TP
 \-\-archive_files

data/man/man8/puppet-key.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-KEY" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand manages certificate private keys\. Keys are created automaticall
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-man.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-MAN" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand displays manual pages for all Puppet subcommands\. If the \fBron
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-master.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-MASTER" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -19,7 +19,7 @@ This command starts an instance of puppet master, running as a daemon and using
 Note that any Puppet setting that\'s valid in the configuration file is also a valid long argument\. For example, \'server\' is a valid setting, so you can specify \'\-\-server \fIservername\fR\' as an argument\. Boolean settings translate into \'\-\-setting\' and \'\-\-no\-setting\' pairs\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable settings\. A commented list of all settings can also be generated by running puppet master with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable settings\. A commented list of all settings can also be generated by running puppet master with \'\-\-genconfig\'\.
 .
 .TP
 \-\-daemonize

data/man/man8/puppet-module.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-MODULE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand can find, install, and manage modules from the Puppet Forge, a r
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT
@@ -39,7 +39,7 @@ The environment Puppet is running in\. For clients (e\.g\., \fBpuppet agent\fR)
 The search path for modules, as a list of directories separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
 .IP
-Setting a global value for \fBmodulepath\fR in puppet\.conf is not allowed (but it can be overridden from the commandline)\. Please use directory environments instead\. If you need to use something other than the default modulepath of \fB<ACTIVE ENVIRONMENT\'S MODULES DIR>:$basemodulepath\fR, you can set \fBmodulepath\fR in environment\.conf\. For more info, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
+Setting a global value for \fBmodulepath\fR in puppet\.conf is not allowed (but it can be overridden from the commandline)\. Please use directory environments instead\. If you need to use something other than the default modulepath of \fB<ACTIVE ENVIRONMENT\'S MODULES DIR>:$basemodulepath\fR, you can set \fBmodulepath\fR in environment\.conf\. For more info, see https://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .SH "ACTIONS"
 .
@@ -322,37 +322,37 @@ Notice: Generating module at /Users/username/Projects/puppet/puppetlabs\-ssh\.\.
 Install a module:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo Preparing to install into /etc/puppetlabs/code/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo Preparing to install into /etc/puppetlabs/code/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a module to a specific environment:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo \-\-environment development Preparing to install into /etc/puppetlabs/code/environments/development/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/environments/development/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo \-\-environment development Preparing to install into /etc/puppetlabs/code/environments/development/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/environments/development/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a specific module version:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo \-v 0\.0\.4 Preparing to install into /etc/puppetlabs/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo \-v 0\.0\.4 Preparing to install into /etc/puppetlabs/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a module into a specific directory:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo \-\-target\-dir=/opt/puppetlabs/puppet/modules Preparing to install into /opt/puppetlabs/puppet/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /opt/puppetlabs/puppet/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo \-\-target\-dir=/opt/puppetlabs/puppet/modules Preparing to install into /opt/puppetlabs/puppet/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /opt/puppetlabs/puppet/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a module into a specific directory and check for dependencies in other directories:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo \-\-target\-dir=/opt/puppetlabs/puppet/modules \-\-modulepath /etc/puppetlabs/code/modules Preparing to install into /opt/puppetlabs/puppet/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /opt/puppetlabs/puppet/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo \-\-target\-dir=/opt/puppetlabs/puppet/modules \-\-modulepath /etc/puppetlabs/code/modules Preparing to install into /opt/puppetlabs/puppet/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /opt/puppetlabs/puppet/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a module from a release archive:
 .
 .P
-$ puppet module install puppetlabs\-vcsrepo\-0\.0\.4\.tar\.gz Preparing to install into /etc/puppetlabs/code/modules \.\.\. Downloading from http://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
+$ puppet module install puppetlabs\-vcsrepo\-0\.0\.4\.tar\.gz Preparing to install into /etc/puppetlabs/code/modules \.\.\. Downloading from https://forgeapi\.puppetlabs\.com \.\.\. Installing \-\- do not interrupt \.\.\. /etc/puppetlabs/code/modules └── puppetlabs\-vcsrepo (v0\.0\.4)
 .
 .P
 Install a module from a release archive and ignore dependencies:

data/man/man8/puppet-node.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-NODE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -16,7 +16,7 @@ This subcommand interacts with node objects, which are used by Puppet to build a
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-parser.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-PARSER" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -13,7 +13,7 @@ puppet parser \fIaction\fR
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-plugin.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-PLUGIN" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -19,7 +19,7 @@ The puppet master serves Ruby code collected from the \fBlib\fR directories of i
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-report.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-REPORT" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -13,7 +13,7 @@ puppet report \fIaction\fR [\-\-terminus TERMINUS] [\-\-extra HASH]
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-resource.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-RESOURCE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -25,7 +25,7 @@ If given a type, a name, and a series of \fIattribute\fR=\fIvalue\fR pairs, pupp
 Note that any setting that\'s valid in the configuration file is also a valid long argument\. For example, \'ssldir\' is a valid setting, so you can specify \'\-\-ssldir \fIdirectory\fR\' as an argument\.
 .
 .P
-See the configuration file documentation at http://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
+See the configuration file documentation at https://docs\.puppetlabs\.com/references/stable/configuration\.html for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \'\-\-genconfig\'\.
 .
 .TP
 \-\-debug

data/man/man8/puppet-resource_type.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-RESOURCE_TYPE" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -19,7 +19,7 @@ It will eventually be extended to examine native resource types\.
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT

data/man/man8/puppet-status.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-STATUS" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .
@@ -13,7 +13,7 @@ puppet status \fIaction\fR [\-\-terminus TERMINUS] [\-\-extra HASH]
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
-See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
+See the configuration file documentation at \fIhttps://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT
@@ -69,7 +69,7 @@ A "true" response or a low\-level connection error\. When used from the Ruby API
 \fBNOTES\fR
 .
 .IP
-This action requires that the server\'s \fBauth\.conf\fR file allow find access to the \fBstatus\fR REST terminus\. Puppet agent does not use this facility, and it is turned off by default\. See \fIhttp://docs\.puppetlabs\.com/guides/rest_auth_conf\.html\fR for more details\.
+This action requires that the server\'s \fBauth\.conf\fR file allow find access to the \fBstatus\fR REST terminus\. Puppet agent does not use this facility, and it is turned off by default\. See \fIhttps://docs\.puppetlabs\.com/guides/rest_auth_conf\.html\fR for more details\.
 .
 .TP
 \fBinfo\fR \- Print the default terminus class for this face\.

data/man/man8/puppet.8

@@ -1,5 +1,5 @@
 .\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.\" https://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET" "8" "May 2015" "Puppet Labs, LLC" "Puppet manual"
 .

data/spec/fixtures/unit/application/environments/production/data/common.yaml

@@ -0,0 +1,22 @@
+---
+a: This is A
+b: This is B
+c: "This is%{cx}"
+
+d:
+  one:
+    two:
+      three: the value
+
+e.one.two.three: the value
+
+f.one:
+  two.three:
+    - first value
+    - second value
+    - third value
+
+ab: "%{hiera('a')} and %{hiera('b')}"
+
+lookup_options:
+  a: first

data/spec/fixtures/unit/application/environments/production/environment.conf

@@ -0,0 +1 @@
+environment_data_provider = 'hiera'

data/spec/fixtures/unit/application/environments/production/manifests/site.pp

@@ -0,0 +1 @@
+$cx = ' C from site.pp'

data/spec/fixtures/unit/application/environments/puppet_func_provider/environment.conf

@@ -0,0 +1 @@
+environment_data_provider = 'function'

data/spec/fixtures/unit/application/environments/puppet_func_provider/functions/environment/data.pp

@@ -0,0 +1,10 @@
+function environment::data() {
+  {
+     a => 'This is A',
+     b => 'This is B',
+     c => "This is ${if $cx == undef { 'C from data.pp' } else { $cx }}",
+     lookup_options => {
+        a => 'first'
+     }
+  }
+}

data/spec/fixtures/unit/application/environments/puppet_func_provider/manifests/site.pp

@@ -0,0 +1 @@
+$cx = 'C from site.pp'

data/spec/fixtures/unit/data_providers/environments/hiera_bad_syntax_json/data/bad.json

@@ -0,0 +1,3 @@
+{
+    "test::param_a": "env data param_a is 10",
+}