puppet 3.8.7 → 4.0.0.rc1

data/conf/tagmail.conf

@@ -1,16 +0,0 @@
-# tagmail.conf
-
-# This file configures the `tagmail` report, which can be enabled by including
-# tagmail in the puppet master's `reports` setting. (`reports = https, tagmail`)
-
-# Each line in this file should consist of a comma-separated list of tags and/or
-# negated tags (`!tag`), a colon, and a comma-separated list of email addresses.
-# The `all` psuedo-tag will email all log events.
-# See http://docs.puppetlabs.com/guides/configuring.html#tagmailconf for
-# a complete description of this file.
-
-# Example:
-
-# all: log-archive@example.com
-# webserver, !mailserver: httpadmins@example.com
-# emerg, crit: james@example.com, zach@example.com, ben@example.com

data/ext/debian/puppet.conf

@@ -1,14 +0,0 @@
-[main]
-logdir=/var/log/puppet
-vardir=/var/lib/puppet
-ssldir=/var/lib/puppet/ssl
-rundir=/var/run/puppet
-factpath=$vardir/lib/facter
-templatedir=$confdir/templates
-
-[master]
-# These are needed when the puppetmaster is run by passenger
-# and can safely be removed if webrick is used.
-ssl_client_header = SSL_CLIENT_S_DN 
-ssl_client_verify_header = SSL_CLIENT_VERIFY
-

data/ext/debian/puppetmaster-common.puppetqd.default

@@ -1,27 +0,0 @@
-# Defaults for puppetqd - sourced by /etc/init.d/puppetqd
-
-# Should puppetqd (the storeconfigs queuing broker) be started? 
-#  This can take some load off of the puppetmaster by queuing the
-#  storeconfig updates to the database with puppetqd. You need
-#  to have the 'stompserver' package installed and running, and
-#  the following configured in your puppet.conf:
-#
-#  [main]
-#  queue_type = stomp
-#  queue_source = stomp://localhost:61613
-#  dbadapter = (sqlite3|mysql|postgresql)
-#  dbserver=localhost
-#  dbname=puppet
-#  dbuser=puppet
-#  dbpassword=xxxx
-#  dblocation = /var/lib/puppet/storeconfigs.sqlite <-- only if using sqlite
-#
-#  [master]
-#  async_storeconfigs = true
-#
-#  See: http://puppetlabs.com/trac/puppet/wiki/UsingStoredConfiguration
-#
-#  Once you have the proper puppet.conf, and stompserver, you can enable
-#  the following:
-PUPPETQD=no
-PUPPETQD_OPTS=""

data/ext/debian/puppetmaster-common.puppetqd.init

@@ -1,84 +0,0 @@
-#! /bin/sh
-### BEGIN INIT INFO
-# Provides: puppetqd
-# Required-Start:    $network $named $remote_fs $syslog
-# Required-Stop:     $network $named $remote_fs $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-### END INIT INFO                 
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/bin/puppet
-DAEMON_OPTS="queue"
-NAME=queue
-DESC="puppet queue"
-PIDFILE="/var/run/puppet/${NAME}.pid"
-
-test -x $DAEMON || exit 0
-
-[ -r /etc/default/puppetqd ] && . /etc/default/puppetqd
-
-. /lib/lsb/init-functions
-
-if [ ! -d /var/run/puppet ]; then
-	mkdir -p /var/run/puppet
-fi
-
-chown puppet:puppet /var/run/puppet
-
-is_true() {
-    if [ "x$1" = "xtrue" -o "x$1" = "xyes" -o "x$1" = "x0" ] ; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-start_puppet_queue() {
-    if is_true "$PUPPETQD" ; then
-	start-stop-daemon --start --quiet --pidfile=${PIDFILE} \
-	    --startas $DAEMON -- $NAME $DAEMON_OPTS $PUPPETQD_OPTS
-    fi
-}
-
-stop_puppet_queue() {
-    start-stop-daemon --stop --quiet --oknodo --pidfile ${PIDFILE}
-    rm -f ${PIDFILE}
-}
-
-status_puppet_queue() {
-    if is_true "$PUPPETQD" ; then
-        status_of_proc -p "${PIDFILE}" "${DAEMON}" "${NAME}"
-    else
-	echo ""
-	echo "puppetqd not configured to start"
-    fi
-}
-
-
-case "$1" in
-    start)
-	log_begin_msg "Starting $DESC"
-	start_puppet_queue
-	log_end_msg $?
-	;;
-    stop)
-	log_begin_msg "Stopping $DESC"
-	stop_puppet_queue
-	log_end_msg $?
-	;;
-    status)
-	status_puppet_queue
-        ;;
-    reload|restart|force-reload)
-	log_begin_msg "Restarting $DESC"
-	stop_puppet_queue
-	sleep 1
-	start_puppet_queue
-	log_end_msg $?
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|restart|force-reload}" >&2
-	exit 1
-	;;
-esac

data/ext/gentoo/puppet/puppet.conf

@@ -1,25 +0,0 @@
-[main]
-    # The Puppet log directory.
-    # The default value is '$vardir/log'.
-    logdir = /var/log/puppet
-
-    # Where Puppet PID files are kept.
-    # The default value is '$vardir/run'.
-    rundir = /var/run/puppet
-
-    # Where SSL certificates are kept.
-    # The default value is '$confdir/ssl'.
-    ssldir = $vardir/ssl
-
-[puppetd]
-    # The file in which puppetd stores a list of the classes
-    # associated with the retrieved configuratiion.  Can be loaded in
-    # the separate ``puppet`` executable using the ``--loadclasses``
-    # option.
-    # The default value is '$confdir/classes.txt'.
-    classfile = $vardir/classes.txt
-
-    # Where puppetd caches the local configuration.  An
-    # extension indicating the cache format is added automatically.
-    # The default value is '$confdir/localconfig'.
-    localconfig = $vardir/localconfig

data/ext/ips/puppet.conf

@@ -1,29 +0,0 @@
-
-[main]
-    vardir = /var/lib/puppet
-
-    # The Puppet log directory.
-    # The default value is '$vardir/log'.
-    logdir = /var/log/puppet
-
-    # Where Puppet PID files are kept.
-    # The default value is '$vardir/run'.
-    rundir = /var/run/puppet
-
-    # Where SSL certificates are kept.
-    # The default value is '$confdir/ssl'.
-    ssldir = $vardir/ssl
-
-[agent]
-    # The file in which puppetd stores a list of the classes
-    # associated with the retrieved configuratiion.  Can be loaded in
-    # the separate ``puppet`` executable using the ``--loadclasses``
-    # option.
-    # The default value is '$confdir/classes.txt'.
-    classfile = $vardir/classes.txt
-
-    # Where puppetd caches the local configuration.  An
-    # extension indicating the cache format is added automatically.
-    # The default value is '$confdir/localconfig'.
-    localconfig = $vardir/localconfig
-

data/ext/nagios/naggen

@@ -1,309 +0,0 @@
-#!/usr/bin/env ruby
-#
-# = Synopsis
-#
-# Generate Nagios configurations from Puppet Resources in an ActiveRecord database
-#
-# = Usage
-#
-#   naggen [-h|--help] [-d|--debug] [-v|--verbose] [--compare]
-#
-# = Description
-#
-# This executable is a means of short-circuiting the process of generating nagios
-# configurations on your server using Puppet Exported Resources.  It skips any possible
-# naming conflicts resulting from Puppet's resource uniqueness requirements, and it
-# also skips the inefficiencies involved in converting and transporting large numbers
-# of Puppet resources.
-#
-# At the least, the machine that runs this will need ActiveRecord (2.0.2) installed,
-# along with any database libraries you use.
-#
-# = Options
-#
-# Note that any setting that's valid in the configuration file
-# is also a valid long argument.  For example, 'ssldir' is a valid configuration
-# parameter, so you can specify '--ssldir <directory>' as an argument.
-#
-# You can add naggen-specific settings to your puppet.conf in a '[naggen]' section,
-# just like any other executable.
-#
-# See the configuration file documentation at
-# http://reductivelabs.com/projects/puppet/reference/configref.html for
-# the full list of acceptable parameters. A commented list of all
-# configuration options can also be generated by running puppet with
-# '--genconfig'.
-#
-# compare::
-#   Compare new and old files and only backup and write if the files are different.
-#   Potentially expensive computationally, but idempotent.  Will exit with 0 if
-#   no changes were made and 1 if there were.
-#
-# debug::
-#   Enable full debugging.
-#
-# detailed-exitcodes::
-#   Provide transaction information via exit codes.  If this is enabled, an exit
-#   code of '2' means there were changes, and an exit code of '4' means that there
-#   were failures during the transaction.
-#
-# help::
-#   Print this help message
-#
-# verbose::
-#   Print extra information.
-#
-# = Example
-#
-#   naggen --storeconfigs --confdir /foo --compare
-#
-#
-# = License
-#   Copyright 2011 Luke Kanies
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-
-require 'puppet'
-require 'puppet/rails'
-require 'puppet/rails/resource'
-require 'puppet/rails/param_value'
-require 'puppet/network/client'
-require 'puppet/parser/collector'
-require 'puppet/provider/naginator'
-require 'getoptlong'
-
-# Monkey-patch the rails resources so we can
-# easily convert them to nagios instances.
-class Puppet::Rails::Resource
-    def to_param_hash
-        values = @params_hash || Puppet::Rails::ParamValue.find_all_params_from_resource(self)
-        if values.size == 0
-            return {}
-        end
-        values.inject({}) do |hash, value|
-            hash[value['name']] ||= []
-            hash[value['name']] << value["value"]
-            hash
-        end
-    end
-
-    def to_nagios
-        unless nagios_type = Nagios::Base.type(restype.sub("Nagios_", '').to_sym)
-            raise Puppet::DevError, "Could not find nagios type '%s'" % restype
-        end
-
-        result = nagios_type.new
-
-        to_param_hash.each do |param, value|
-            next unless nagios_type.parameter?(param)
-            result[param] = value
-        end
-
-        result[:name] = self.title
-
-        result
-    end
-end
-
-class NagiosWriter
-    class FakeScope
-        def debug(string)
-            Puppet.debug string
-        end
-
-        def host
-            "this host doesn't exist"
-        end
-    end
-
-    attr_accessor :nagios_type, :bucket
-
-    def backup(target)
-        return unless FileTest.exist?(target) and File.stat(target).size > 0
-
-        Puppet.info "Backing up %s" % target
-        bucket.backup(target)
-    end
-
-    def collector
-        collector = Puppet::Parser::Collector.new(FakeScope.new, "nagios_" + @nagios_type.to_s, nil, nil, :exported)
-
-        # We don't have a scope, so we're stubbing everything out that would interact
-        # with the scope.
-        class << collector
-            def collect_virtual(*args)
-                []
-            end
-
-            def exported_resource(res)
-                res
-            end
-        end
-
-        collector
-    end
-
-    def default_target
-        "/etc/nagios/nagios_#{nagios_type.to_s}.cfg"
-    end
-
-    def evaluate
-        return unless resources = rails_resources()
-
-        resources_by_target = resources.inject({}) do |hash, resource|
-            target = resource["target"] || default_target
-            hash[target] ||= []
-            hash[target] << resource
-            hash
-        end
-
-        changed = false
-        resources_by_target.each do |target, resources|
-            begin
-                result = write(target, resources)
-            rescue => detail
-                $stderr.puts detail.backtrace
-                Puppet.err "Could not write to %s: %s" % [target, detail]
-            end
-
-            changed = true if result
-        end
-
-        changed
-    end
-
-    def initialize(nagios_type)
-        @nagios_type = nagios_type
-
-        @bucket = Puppet::FileBucket::Dipper.new(:Path => Puppet[:clientbucketdir])
-    end
-
-    def rails_resources
-        collector.send(:collect_exported)
-    end
-
-    def write(target, resources)
-        # Skip the nagios type when we have no resources and no existing
-        # file.
-        return if resources.empty? and ! FileTest.exist?(target)
-
-        dir = File.dirname(target)
-        unless FileTest.exist?(dir)
-            FileUtils.mkdir_p(dir)
-        end
-
-        count = 0
-
-        tempfile = target + ".tmp"
-        File.open(tempfile, "w") do |file|
-            resources.each do |resource|
-                count += 1
-                file.puts resource.to_nagios.to_s.gsub("_naginator_name", Puppet::Provider::Naginator::NAME_STRING)
-            end
-        end
-
-        if $options[:compare]
-            if FileTest.exist?(target) and File.read(tempfile) == File.read(target)
-                return false
-            end
-        end
-
-        backup(target)
-
-        # Atomic rename
-        File.rename(tempfile, target)
-
-        Puppet.notice "Wrote %s resources to %s" % [count, target]
-
-        return true
-    ensure
-        File.unlink(tempfile) if tempfile and FileTest.exist?(tempfile)
-    end
-end
-
-arguments = [
-    [ "--compare", "-c", GetoptLong::NO_ARGUMENT ],
-    [ "--debug",   "-d", GetoptLong::NO_ARGUMENT ],
-    [ "--verbose", "-v", GetoptLong::NO_ARGUMENT ],
-    [ "--help",    "-h", GetoptLong::NO_ARGUMENT ]
-]
-
-Puppet.settings.addargs(arguments)
-
-result = GetoptLong.new(*arguments)
-
-$options = {}
-result.each { |opt,arg|
-    case opt
-        when "--help"
-            begin
-                require 'rdoc/usage'
-                RDoc::usage && exit
-            rescue LoadError
-                docs = []
-                File.readlines(__FILE__).each do |line|
-                    next if line =~ /^#\!/
-                    unless line =~ /^#/
-                        next if docs.length == 0 # skip the first line or so
-                        break # else, we've passed the docs, so just break
-                    end
-                    docs << line.sub(/^# ?/, '')
-                end
-
-                print docs
-                exit
-            end
-        when "--compare"
-            $options[:compare] = true
-        when "--verbose"
-            $options[:verbose] = true
-        when "--debug"
-            $options[:debug] = true
-        when "--debug"
-            $options[:debug] = true
-    else
-            Puppet.settings.handlearg(opt, arg)
-    end
-}
-
-# Read in Puppet settings, so we know how Puppet's configured.
-Puppet.initialize_settings
-
-Puppet::Util::Log.newdestination(:console)
-
-if $options[:debug]
-    Puppet::Util::Log.level = :debug
-elsif $options[:verbose]
-    Puppet::Util::Log.level = :info
-end
-
-# See if Naginator is installed directly, else load Puppet's version.
-begin
-    require 'nagios'
-rescue LoadError
-    require 'puppet/external/nagios'
-end
-
-changed = false
-Nagios::Base.eachtype do |name, type|
-    writer = NagiosWriter.new(name)
-
-    changed = true if writer.evaluate
-end
-
-if $options[:compare] and changed
-    exit(1)
-else
-    exit(0)
-end
-