puppet-retrospec 0.7.0 → 0.7.2

data/vendor/gems/puppet-3.7.3/lib/puppet/type/vlan.rb

@@ -0,0 +1,26 @@
+#
+# Manages a Vlan on a given router or switch
+#
+
+Puppet::Type.newtype(:vlan) do
+    @doc = "Manages a VLAN on a router or switch."
+
+    apply_to_device
+
+    ensurable
+
+    newparam(:name) do
+      desc "The numeric VLAN ID."
+      isnamevar
+
+      newvalues(/^\d+/)
+    end
+
+    newproperty(:description) do
+      desc "The VLAN's name."
+    end
+
+    newparam(:device_url) do
+      desc "The URL of the router or switch maintaining this VLAN."
+    end
+end

data/vendor/gems/puppet-3.7.3/lib/puppet/type/whit.rb

@@ -0,0 +1,34 @@
+Puppet::Type.newtype(:whit) do
+  desc "Whits are internal artifacts of Puppet's current implementation, and
+    Puppet suppresses their appearance in all logs. We make no guarantee of
+    the whit's continued existence, and it should never be used in an actual
+    manifest. Use the `anchor` type from the puppetlabs-stdlib module if you
+    need arbitrary whit-like no-op resources."
+
+  newparam :name do
+    desc "The name of the whit, because it must have one."
+  end
+
+
+  # Hide the fact that we're a whit from logs.
+  #
+  # I hate you, milkman whit.  You are so painful, so often.
+  #
+  # In this case the memoized version means we generate a new string about 1.9
+  # percent of the time, and we allocate about 1.6MB less memory, and generate
+  # a whole lot less GC churn.
+  #
+  # That number probably goes up at least O(n) with the complexity of your
+  # catalog, and I suspect beyond that, because that is, like, 10,000 calls
+  # for 200 distinct objects.  Even with just linear, that is a constant
+  # factor of, like, 50n. --daniel 2012-07-17
+  def to_s
+    @to_s ||= name.sub(/^completed_|^admissible_/, "")
+  end
+  alias path to_s
+
+  def refresh
+    # We don't do anything with them, but we need this to show that we are
+    # "refresh aware" and not break the chain of propagation.
+  end
+end

data/vendor/gems/puppet-3.7.3/lib/puppet/type/yumrepo.rb

@@ -0,0 +1,363 @@
+require 'uri'
+
+Puppet::Type.newtype(:yumrepo) do
+  @doc = "The client-side description of a yum repository. Repository
+    configurations are found by parsing `/etc/yum.conf` and
+    the files indicated by the `reposdir` option in that file
+    (see `yum.conf(5)` for details).
+
+    Most parameters are identical to the ones documented
+    in the `yum.conf(5)` man page.
+
+    Continuation lines that yum supports (for the `baseurl`, for example)
+    are not supported. This type does not attempt to read or verify the
+    exinstence of files listed in the `include` attribute."
+
+  # Ensure yumrepos can be removed too.
+  ensurable
+  # Doc string for properties that can be made 'absent'
+  ABSENT_DOC="Set this to `absent` to remove it from the file completely."
+  # False can be false/0/no and True can be true/1/yes in yum.
+  YUM_BOOLEAN=/^(True|False|0|1|No|Yes)$/i
+  YUM_BOOLEAN_DOC="Valid values are: False/0/No or True/1/Yes."
+
+  VALID_SCHEMES = %w[file http https ftp]
+
+  newparam(:name, :namevar => true) do
+    desc "The name of the repository.  This corresponds to the
+     `repositoryid` parameter in `yum.conf(5)`."
+  end
+
+  newparam(:target) do
+    desc "The filename to write the yum repository to."
+
+    defaultto :absent
+  end
+
+  newproperty(:descr) do
+    desc "A human-readable description of the repository.
+      This corresponds to the name parameter in `yum.conf(5)`.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:mirrorlist) do
+    desc "The URL that holds the list of mirrors for this repository.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+      parsed = URI.parse(value)
+
+      unless VALID_SCHEMES.include?(parsed.scheme)
+        raise "Must be a valid URL"
+      end
+    end
+  end
+
+  newproperty(:baseurl) do
+    desc "The URL for this repository. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+
+      value.split(/\s+/).each do |uri|
+
+        parsed = URI.parse(uri)
+
+        unless VALID_SCHEMES.include?(parsed.scheme)
+          raise "Must be a valid URL"
+        end
+      end
+    end
+  end
+
+  newproperty(:enabled) do
+    desc "Whether this repository is enabled.
+    #{YUM_BOOLEAN_DOC}
+    #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:gpgcheck) do
+    desc "Whether to check the GPG signature on packages installed
+      from this repository.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:repo_gpgcheck) do
+    desc "Whether to check the GPG signature on repodata.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:gpgkey) do
+    desc "The URL for the GPG key with which packages from this
+      repository are signed. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+
+      value.split(/\s+/).each do |uri|
+
+        parsed = URI.parse(uri)
+
+        unless VALID_SCHEMES.include?(parsed.scheme)
+          raise "Must be a valid URL"
+        end
+      end
+    end
+  end
+
+  newproperty(:mirrorlist_expire) do
+    desc "Time (in seconds) after which the mirrorlist locally cached
+      will expire.\n#{ABSENT_DOC}"
+
+    newvalues(/^[0-9]+$/, :absent)
+  end
+
+  newproperty(:include) do
+    desc "The URL of a remote file containing additional yum configuration
+      settings. Puppet does not check for this file's existence or validity.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+      parsed = URI.parse(value)
+
+      unless VALID_SCHEMES.include?(parsed.scheme)
+        raise "Must be a valid URL"
+      end
+    end
+  end
+
+  newproperty(:exclude) do
+    desc "List of shell globs. Matching packages will never be
+      considered in updates or installs for this repo.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:gpgcakey) do
+    desc "The URL for the GPG CA key for this repository. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+      parsed = URI.parse(value)
+
+      unless VALID_SCHEMES.include?(parsed.scheme)
+        raise "Must be a valid URL"
+      end
+    end
+  end
+
+  newproperty(:includepkgs) do
+    desc "List of shell globs. If this is set, only packages
+      matching one of the globs will be considered for
+      update or install from this repo. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:enablegroups) do
+    desc "Whether yum will allow the use of package groups for this
+      repository.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:failovermethod) do
+    desc "The failover method for this repository; should be either
+      `roundrobin` or `priority`. #{ABSENT_DOC}"
+
+    newvalues(/^roundrobin|priority$/, :absent)
+  end
+
+  newproperty(:keepalive) do
+    desc "Whether HTTP/1.1 keepalive should be used with this repository.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:retries) do
+    desc "Set the number of times any attempt to retrieve a file should
+      retry before returning an error. Setting this to `0` makes yum
+     try forever.\n#{ABSENT_DOC}"
+
+    newvalues(/^[0-9]+$/, :absent)
+  end
+
+  newproperty(:http_caching) do
+    desc "What to cache from this repository. #{ABSENT_DOC}"
+
+    newvalues(/^(packages|all|none)$/, :absent)
+  end
+
+  newproperty(:timeout) do
+    desc "Number of seconds to wait for a connection before timing
+      out. #{ABSENT_DOC}"
+
+    newvalues(/^\d+$/, :absent)
+  end
+
+  newproperty(:metadata_expire) do
+    desc "Number of seconds after which the metadata will expire.
+      #{ABSENT_DOC}"
+
+    newvalues(/^([0-9]+[dhm]?|never)$/, :absent)
+  end
+
+  newproperty(:protect) do
+    desc "Enable or disable protection for this repository. Requires
+      that the `protectbase` plugin is installed and enabled.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:priority) do
+    desc "Priority of this repository from 1-99. Requires that
+      the `priorities` plugin is installed and enabled.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+      unless (1..99).include?(value.to_i)
+        fail("Must be within range 1-99")
+      end
+    end
+  end
+
+  newproperty(:throttle) do
+    desc "Enable bandwidth throttling for downloads. This option
+      can be expressed as a absolute data rate in bytes/sec or a
+      percentage `60%`. An SI prefix (k, M or G) may be appended
+      to the data rate values.\n#{ABSENT_DOC}"
+
+    newvalues(/^\d+[kMG%]?$/, :absent)
+  end
+
+  newproperty(:bandwidth) do
+    desc "Use to specify the maximum available network bandwidth
+      in bytes/second. Used with the `throttle` option. If `throttle`
+      is a percentage and `bandwidth` is `0` then bandwidth throttling
+      will be disabled. If `throttle` is expressed as a data rate then
+      this option is ignored.\n#{ABSENT_DOC}"
+
+    newvalues(/^\d+[kMG]?$/, :absent)
+  end
+
+  newproperty(:cost) do
+    desc "Cost of this repository. #{ABSENT_DOC}"
+
+    newvalues(/^\d+$/, :absent)
+  end
+
+  newproperty(:proxy) do
+    desc "URL of a proxy server that Yum should use when accessing this repository.
+      This attribute can also be set to `'_none_'`, which will make Yum bypass any
+      global proxy settings when accessing this repository.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s =~ /^(absent|_none_)$/
+      parsed = URI.parse(value)
+
+      unless VALID_SCHEMES.include?(parsed.scheme)
+        raise "Must be a valid URL"
+      end
+    end
+  end
+
+  newproperty(:proxy_username) do
+    desc "Username for this proxy. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:proxy_password) do
+    desc "Password for this proxy. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:s3_enabled) do
+    desc "Access the repo via S3.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:sslcacert) do
+    desc "Path to the directory containing the databases of the
+      certificate authorities yum should use to verify SSL certificates.
+      #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:sslverify) do
+    desc "Should yum verify SSL certificates/hosts at all.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+
+  newproperty(:sslclientcert) do
+    desc "Path  to the SSL client certificate yum should use to connect
+      to repos/remote sites. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:sslclientkey) do
+    desc "Path to the SSL client key yum should use to connect
+      to repos/remote sites. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+  end
+
+  newproperty(:metalink) do
+    desc "Metalink for mirrors. #{ABSENT_DOC}"
+
+    newvalues(/.*/, :absent)
+    validate do |value|
+      next if value.to_s == 'absent'
+      parsed = URI.parse(value)
+
+      unless VALID_SCHEMES.include?(parsed.scheme)
+        raise "Must be a valid URL"
+      end
+    end
+  end
+
+  newproperty(:skip_if_unavailable) do
+    desc "Should yum skip this repository if unable to reach it.
+      #{YUM_BOOLEAN_DOC}
+      #{ABSENT_DOC}"
+
+    newvalues(YUM_BOOLEAN, :absent)
+  end
+end

data/vendor/gems/puppet-3.7.3/lib/puppet/type/zfs.rb

@@ -0,0 +1,150 @@
+module Puppet
+  newtype(:zfs) do
+    @doc = "Manage zfs. Create destroy and set properties on zfs instances.
+
+**Autorequires:** If Puppet is managing the zpool at the root of this zfs
+instance, the zfs resource will autorequire it. If Puppet is managing any
+parent zfs instances, the zfs resource will autorequire them."
+
+    ensurable
+
+    newparam(:name) do
+      desc "The full name for this filesystem (including the zpool)."
+    end
+
+    newproperty(:aclinherit) do
+      desc "The aclinherit property. Valid values are `discard`, `noallow`, `restricted`, `passthrough`, `passthrough-x`."
+    end
+
+    newproperty(:aclmode) do
+      desc "The aclmode property. Valid values are `discard`, `groupmask`, `passthrough`."
+    end
+
+    newproperty(:atime) do
+      desc "The atime property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:canmount) do
+      desc "The canmount property. Valid values are `on`, `off`, `noauto`."
+    end
+
+    newproperty(:checksum) do
+      desc "The checksum property. Valid values are `on`, `off`, `fletcher2`, `fletcher4`, `sha256`."
+    end
+
+    newproperty(:compression) do
+      desc "The compression property. Valid values are `on`, `off`, `lzjb`, `gzip`, `gzip-[1-9]`, `zle`."
+    end
+
+    newproperty(:copies) do
+      desc "The copies property. Valid values are `1`, `2`, `3`."
+    end
+
+    newproperty(:dedup) do
+      desc "The dedup property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:devices) do
+      desc "The devices property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:exec) do
+      desc "The exec property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:logbias) do
+      desc "The logbias property. Valid values are `latency`, `throughput`."
+    end
+
+    newproperty(:mountpoint) do
+      desc "The mountpoint property. Valid values are `<path>`, `legacy`, `none`."
+    end
+
+    newproperty(:nbmand) do
+      desc "The nbmand property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:primarycache) do
+      desc "The primarycache property. Valid values are `all`, `none`, `metadata`."
+    end
+
+    newproperty(:quota) do
+      desc "The quota property. Valid values are `<size>`, `none`."
+    end
+
+    newproperty(:readonly) do
+      desc "The readonly property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:recordsize) do
+      desc "The recordsize property. Valid values are powers of two between 512 and 128k."
+    end
+
+    newproperty(:refquota) do
+      desc "The refquota property. Valid values are `<size>`, `none`."
+    end
+
+    newproperty(:refreservation) do
+      desc "The refreservation property. Valid values are `<size>`, `none`."
+    end
+
+    newproperty(:reservation) do
+      desc "The reservation property. Valid values are `<size>`, `none`."
+    end
+
+    newproperty(:secondarycache) do
+      desc "The secondarycache property. Valid values are `all`, `none`, `metadata`."
+    end
+
+    newproperty(:setuid) do
+      desc "The setuid property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:shareiscsi) do
+      desc "The shareiscsi property. Valid values are `on`, `off`, `type=<type>`."
+    end
+
+    newproperty(:sharenfs) do
+      desc "The sharenfs property. Valid values are `on`, `off`, share(1M) options"
+    end
+
+    newproperty(:sharesmb) do
+      desc "The sharesmb property. Valid values are `on`, `off`, sharemgr(1M) options"
+    end
+
+    newproperty(:snapdir) do
+      desc "The snapdir property. Valid values are `hidden`, `visible`."
+    end
+
+    newproperty(:version) do
+      desc "The version property. Valid values are `1`, `2`, `3`, `4`, `current`."
+    end
+
+    newproperty(:volsize) do
+      desc "The volsize property. Valid values are `<size>`"
+    end
+
+    newproperty(:vscan) do
+      desc "The vscan property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:xattr) do
+      desc "The xattr property. Valid values are `on`, `off`."
+    end
+
+    newproperty(:zoned) do
+      desc "The zoned property. Valid values are `on`, `off`."
+    end
+
+    autorequire(:zpool) do
+      #strip the zpool off the zfs name and autorequire it
+      [@parameters[:name].value.split('/')[0]]
+    end
+
+    autorequire(:zfs) do
+      #slice and dice, we want all the zfs before this one
+      names = @parameters[:name].value.split('/')
+      names.slice(1..-2).inject([]) { |a,v| a << "#{a.last}/#{v}" }.collect { |fs| names[0] + fs }
+    end
+  end
+end