puma 6.3.1-java → 6.4.1-java

data/lib/puma/cluster.rb

@@ -85,9 +85,7 @@ module Puma
         @workers << WorkerHandle.new(idx, pid, @phase, @options)
       end
 
-      if @options[:fork_worker] &&
-        @workers.all? {|x| x.phase == @phase}
-
+      if @options[:fork_worker] && all_workers_in_phase?
         @fork_writer << "0\n"
       end
     end
@@ -148,10 +146,22 @@ module Puma
       idx
     end
 
+    def worker_at(idx)
+      @workers.find { |w| w.index == idx }
+    end
+
     def all_workers_booted?
       @workers.count { |w| !w.booted? } == 0
     end
 
+    def all_workers_in_phase?
+      @workers.all? { |w| w.phase == @phase }
+    end
+
+    def all_workers_idle_timed_out?
+      (@workers.map(&:pid) - idle_timed_out_worker_pids).empty?
+    end
+
     def check_workers
       return if @next_check >= Time.now
 
@@ -276,7 +286,7 @@ module Puma
 
     # @version 5.0.0
     def fork_worker!
-      if (worker = @workers.find { |w| w.index == 0 })
+      if (worker = worker_at 0)
         worker.phase += 1
       end
       phased_restart(true)
@@ -338,6 +348,8 @@ module Puma
     def run
       @status = :run
 
+      @idle_workers = {}
+
       output_header "cluster"
 
       # This is aligned with the output from Runner, see Runner#output_header
@@ -411,6 +423,8 @@ module Puma
 
       @master_read, @worker_write = read, @wakeup
 
+      @options[:worker_write] = @worker_write
+
       @config.run_hooks(:before_fork, nil, @log_writer)
 
       spawn_workers
@@ -426,6 +440,11 @@ module Puma
 
         while @status == :run
           begin
+            if all_workers_idle_timed_out?
+              log "- All workers reached idle timeout"
+              break
+            end
+
             if @phased_restart
               start_phased_restart
               @phased_restart = false
@@ -446,7 +465,7 @@ module Puma
 
               if req == "b" || req == "f"
                 pid, idx = result.split(':').map(&:to_i)
-                w = @workers.find {|x| x.index == idx}
+                w = worker_at idx
                 w.pid = pid if w.pid.nil?
               end
 
@@ -463,24 +482,37 @@ module Puma
                 when "t"
                   w.term unless w.term?
                 when "p"
-                  w.ping!(result.sub(/^\d+/,'').chomp)
+                  status = result.sub(/^\d+/,'').chomp
+                  w.ping!(status)
                   @events.fire(:ping!, w)
+
+                  if in_phased_restart && workers_not_booted.positive? && w0 = worker_at(0)
+                    w0.ping!(status)
+                    @events.fire(:ping!, w0)
+                  end
+
                   if !booted && @workers.none? {|worker| worker.last_status.empty?}
                     @events.fire_on_booted!
                     debug_loaded_extensions("Loaded Extensions - master:") if @log_writer.debug?
                     booted = true
                   end
+                when "i"
+                  if @idle_workers[pid]
+                    @idle_workers.delete pid
+                  else
+                    @idle_workers[pid] = true
+                  end
                 end
               else
                 log "! Out-of-sync worker list, no #{pid} worker"
               end
             end
+
             if in_phased_restart && workers_not_booted.zero?
               @events.fire_on_booted!
               debug_loaded_extensions("Loaded Extensions - master:") if @log_writer.debug?
               in_phased_restart = false
             end
-
           rescue Interrupt
             @status = :stop
           end
@@ -509,10 +541,28 @@ module Puma
     # loops thru @workers, removing workers that exited, and calling
     # `#term` if needed
     def wait_workers
+      # Reap all children, known workers or otherwise.
+      # If puma has PID 1, as it's common in containerized environments,
+      # then it's responsible for reaping orphaned processes, so we must reap
+      # all our dead children, regardless of whether they are workers we spawned
+      # or some reattached processes.
+      reaped_children = {}
+      loop do
+        begin
+          pid, status = Process.wait2(-1, Process::WNOHANG)
+          break unless pid
+          reaped_children[pid] = status
+        rescue Errno::ECHILD
+          break
+        end
+      end
+
       @workers.reject! do |w|
         next false if w.pid.nil?
         begin
-          if Process.wait(w.pid, Process::WNOHANG)
+          # When `fork_worker` is enabled, some worker may not be direct children, but grand children.
+          # Because of this they won't be reaped by `Process.wait2(-1)`, so we need to check them individually)
+          if reaped_children.delete(w.pid) || (@options[:fork_worker] && Process.wait(w.pid, Process::WNOHANG))
             true
           else
             w.term if w.term?
@@ -529,6 +579,11 @@ module Puma
           end
         end
       end
+
+      # Log unknown children
+      reaped_children.each do |pid, status|
+        log "! reaped unknown child process pid=#{pid} status=#{status}"
+      end
     end
 
     # @version 5.0.0
@@ -536,14 +591,18 @@ module Puma
       @workers.each do |w|
         if !w.term? && w.ping_timeout <= Time.now
           details = if w.booted?
-                      "(worker failed to check in within #{@options[:worker_timeout]} seconds)"
+                      "(Worker #{w.index} failed to check in within #{@options[:worker_timeout]} seconds)"
                     else
-                      "(worker failed to boot within #{@options[:worker_boot_timeout]} seconds)"
+                      "(Worker #{w.index} failed to boot within #{@options[:worker_boot_timeout]} seconds)"
                     end
           log "! Terminating timed out worker #{details}: #{w.pid}"
           w.kill
         end
       end
     end
+
+    def idle_timed_out_worker_pids
+      @idle_workers.keys
+    end
   end
 end

data/lib/puma/configuration.rb

@@ -3,7 +3,7 @@
 require_relative 'rack/builder'
 require_relative 'plugin'
 require_relative 'const'
-# note that dsl is loaded at end of file, requires ConfigDefault constants
+require_relative 'dsl'
 
 module Puma
   # A class used for storing "leveled" configuration options.
@@ -133,8 +133,10 @@ module Puma
       debug: false,
       early_hints: nil,
       environment: 'development'.freeze,
-      # Number of seconds to wait until we get the first data for the request
+      # Number of seconds to wait until we get the first data for the request.
       first_data_timeout: 30,
+      # Number of seconds to wait until the next request before shutting down.
+      idle_timeout: nil,
       io_selector_backend: :auto,
       log_requests: false,
       logger: STDOUT,
@@ -385,5 +387,3 @@ module Puma
     end
   end
 end
-
-require_relative 'dsl'

data/lib/puma/const.rb

@@ -100,8 +100,8 @@ module Puma
   # too taxing on performance.
   module Const
 
-    PUMA_VERSION = VERSION = "6.3.1"
-    CODE_NAME = "Mugi No Toki Itaru"
+    PUMA_VERSION = VERSION = "6.4.1"
+    CODE_NAME = "The Eagle of Durango"
 
     PUMA_SERVER_STRING = ["puma", PUMA_VERSION, CODE_NAME].join(" ").freeze
 

data/lib/puma/control_cli.rb

@@ -1,10 +1,8 @@
 # frozen_string_literal: true
 
 require 'optparse'
-require_relative 'state_file'
 require_relative 'const'
 require_relative 'detect'
-require_relative 'configuration'
 require 'uri'
 require 'socket'
 
@@ -126,6 +124,9 @@ module Puma
         end
 
         if @config_file
+          require_relative 'configuration'
+          require_relative 'log_writer'
+
           config = Puma::Configuration.new({ config_files: [@config_file] }, {})
           config.load
           @state              ||= config.options[:state]
@@ -149,6 +150,8 @@ module Puma
           raise "State file not found: #{@state}"
         end
 
+        require_relative 'state_file'
+
         sf = Puma::StateFile.new
         sf.load @state
 
@@ -164,22 +167,26 @@ module Puma
     def send_request
       uri = URI.parse @control_url
 
+      host = uri.host
+
       # create server object by scheme
       server =
         case uri.scheme
         when 'ssl'
           require 'openssl'
+          host = host[1..-2] if host&.start_with? '['
           OpenSSL::SSL::SSLSocket.new(
-            TCPSocket.new(uri.host, uri.port),
+            TCPSocket.new(host, uri.port),
             OpenSSL::SSL::SSLContext.new)
             .tap { |ssl| ssl.sync_close = true }  # default is false
             .tap(&:connect)
         when 'tcp'
-          TCPSocket.new uri.host, uri.port
+          host = host[1..-2] if host&.start_with? '['
+          TCPSocket.new host, uri.port
         when 'unix'
           # check for abstract UNIXSocket
           UNIXSocket.new(@control_url.start_with?('unix://@') ?
-            "\0#{uri.host}#{uri.path}" : "#{uri.host}#{uri.path}")
+            "\0#{host}#{uri.path}" : "#{host}#{uri.path}")
         else
           raise "Invalid scheme: #{uri.scheme}"
         end

data/lib/puma/detect.rb

@@ -12,15 +12,14 @@ module Puma
 
   IS_JRUBY = Object.const_defined? :JRUBY_VERSION
 
-  IS_OSX = RUBY_PLATFORM.include? 'darwin'
+  IS_OSX = RUBY_DESCRIPTION.include? 'darwin'
 
-  IS_WINDOWS = !!(RUBY_PLATFORM =~ /mswin|ming|cygwin/) ||
-    IS_JRUBY && RUBY_DESCRIPTION.include?('mswin')
+  IS_WINDOWS = RUBY_DESCRIPTION.match?(/mswin|ming|cygwin/)
 
   IS_LINUX = !(IS_OSX || IS_WINDOWS)
 
   # @version 5.2.0
-  IS_MRI = (RUBY_ENGINE == 'ruby' || RUBY_ENGINE.nil?)
+  IS_MRI = RUBY_ENGINE == 'ruby'
 
   def self.jruby?
     IS_JRUBY

data/lib/puma/dsl.rb

@@ -315,16 +315,22 @@ module Puma
       bind URI::Generic.build(scheme: 'tcp', host: host, port: Integer(port)).to_s
     end
 
+    # Define how long the tcp socket stays open, if no data has been received.
+    # @see Puma::Server.new
+    def first_data_timeout(seconds)
+      @options[:first_data_timeout] = Integer(seconds)
+    end
+
     # Define how long persistent connections can be idle before Puma closes them.
     # @see Puma::Server.new
     def persistent_timeout(seconds)
       @options[:persistent_timeout] = Integer(seconds)
     end
 
-    # Define how long the tcp socket stays open, if no data has been received.
+    # If a new request is not received within this number of seconds, begin shutting down.
     # @see Puma::Server.new
-    def first_data_timeout(seconds)
-      @options[:first_data_timeout] = Integer(seconds)
+    def idle_timeout(seconds)
+      @options[:idle_timeout] = Integer(seconds)
     end
 
     # Work around leaky apps that leave garbage in Thread locals
@@ -510,6 +516,12 @@ module Puma
     # `true`, which sets reuse 'on' with default values, or a hash, with `:size`
     # and/or `:timeout` keys, each with integer values.
     #
+    # The `cert:` options hash parameter can be the path to a certificate
+    # file including all intermediate certificates in PEM format.
+    #
+    # The `cert_pem:` options hash parameter can be String containing the
+    # cerificate and all intermediate certificates in PEM format.
+    #
     # @example
     #   ssl_bind '127.0.0.1', '9292', {
     #     cert: path_to_cert,
@@ -717,6 +729,51 @@ module Puma
       process_hook :before_refork, key, block, 'on_refork'
     end
 
+    # Provide a block to be executed just before a thread is added to the thread
+    # pool. Be careful: while the block executes, thread creation is delayed, and
+    # probably a request will have to wait too! The new thread will not be added to
+    # the threadpool until the provided block returns.
+    #
+    # Return values are ignored.
+    # Raising an exception will log a warning.
+    #
+    # This hook is useful for doing something when the thread pool grows.
+    #
+    # This can be called multiple times to add several hooks.
+    #
+    # @example
+    #   on_thread_start do
+    #     puts 'On thread start...'
+    #   end
+    def on_thread_start(&block)
+      @options[:before_thread_start] ||= []
+      @options[:before_thread_start] << block
+    end
+
+    # Provide a block to be executed after a thread is trimmed from the thread
+    # pool. Be careful: while this block executes, Puma's main loop is
+    # blocked, so no new requests will be picked up.
+    #
+    # This hook only runs when a thread in the threadpool is trimmed by Puma.
+    # It does not run when a thread dies due to exceptions or any other cause.
+    #
+    # Return values are ignored.
+    # Raising an exception will log a warning.
+    #
+    # This hook is useful for cleaning up thread local resources when a thread
+    # is trimmed.
+    #
+    # This can be called multiple times to add several hooks.
+    #
+    # @example
+    #   on_thread_exit do
+    #     puts 'On thread exit...'
+    #   end
+    def on_thread_exit(&block)
+      @options[:before_thread_exit] ||= []
+      @options[:before_thread_exit] << block
+    end
+
     # Code to run out-of-band when the worker is idle.
     # These hooks run immediately after a request has finished
     # processing and there are no busy threads on the worker.
@@ -848,7 +905,8 @@ module Puma
     # not a request timeout, it is to protect against a hung or dead process.
     # Setting this value will not protect against slow requests.
     #
-    # The minimum value is 6 seconds, the default value is 60 seconds.
+    # This value must be greater than worker_check_interval.
+    # The default value is 60 seconds.
     #
     # @note Cluster mode only.
     # @example
@@ -1132,8 +1190,10 @@ module Puma
 
     def warn_if_in_single_mode(hook_name)
       return if @options[:silence_fork_callback_warning]
-
-      if (@options[:workers] || 0) == 0
+      # user_options (CLI) have precedence over config file
+      workers_val = @config.options.user_options[:workers] || @options[:workers] ||
+        @config.puma_default_options[:workers] || 0
+      if workers_val == 0
         log_string =
           "Warning: You specified code to run in a `#{hook_name}` block, " \
           "but Puma is not configured to run in cluster mode (worker count > 0 ), " \

data/lib/puma/minissl/context_builder.rb

@@ -51,6 +51,8 @@ module Puma
             unless params['ca']
               log_writer.error "Please specify the SSL ca via 'ca='"
             end
+            # needed for Puma::MiniSSL::Socket#peercert, env['puma.peercert']
+            require 'openssl'
           end
 
           ctx.ca = params['ca'] if params['ca']

data/lib/puma/minissl.rb

@@ -184,6 +184,11 @@ module Puma
         @socket.peeraddr
       end
 
+      # OpenSSL is loaded in `MiniSSL::ContextBuilder` when
+      # `MiniSSL::Context#verify_mode` is not `VERIFY_NONE`.
+      # When `VERIFY_NONE`, `MiniSSL::Engine#peercert` is nil, regardless of
+      # whether the client sends a cert.
+      # @return [OpenSSL::X509::Certificate, nil]
       # @!attribute [r] peercert
       def peercert
         return @peercert if @peercert

data/lib/puma/null_io.rb

@@ -18,8 +18,22 @@ module Puma
 
     # Mimics IO#read with no data.
     #
-    def read(count = nil, _buffer = nil)
-      count && count > 0 ? nil : ""
+    def read(length = nil, buffer = nil)
+      if length.to_i < 0
+        raise ArgumentError, "(negative length #{length} given)"
+      end
+
+      buffer = if buffer.nil?
+        "".b
+      else
+        String.try_convert(buffer) or raise TypeError, "no implicit conversion of #{buffer.class} into String"
+      end
+      buffer.clear
+      if length.to_i > 0
+        nil
+      else
+        buffer
+      end
     end
 
     def rewind

data/lib/puma/rack/urlmap.rb

@@ -34,7 +34,7 @@ module Puma::Rack
         end
 
         location = location.chomp('/')
-        match = Regexp.new("^#{Regexp.quote(location).gsub('/', '/+')}(.*)", nil, 'n')
+        match = Regexp.new("^#{Regexp.quote(location).gsub('/', '/+')}(.*)", Regexp::NOENCODING)
 
         [host, location, match, app]
       }.sort_by do |(host, location, _, _)|

data/lib/puma/runner.rb

@@ -70,12 +70,16 @@ module Puma
 
       app = Puma::App::Status.new @launcher, token
 
-      # A Reactor is not created aand nio4r is not loaded when 'queue_requests: false'
+      # A Reactor is not created and nio4r is not loaded when 'queue_requests: false'
       # Use `nil` for events, no hooks in control server
       control = Puma::Server.new app, nil,
         { min_threads: 0, max_threads: 1, queue_requests: false, log_writer: @log_writer }
 
-      control.binder.parse [str], nil, 'Starting control server'
+      begin
+        control.binder.parse [str], nil, 'Starting control server'
+      rescue Errno::EADDRINUSE, Errno::EACCES => e
+        raise e, "Error: Control server address '#{str}' is already in use. Original error: #{e.message}"
+      end
 
       control.run thread_name: 'ctl'
       @control = control

data/lib/puma/server.rb

@@ -15,7 +15,6 @@ require_relative 'request'
 
 require 'socket'
 require 'io/wait' unless Puma::HAS_NATIVE_IO_WAIT
-require 'forwardable'
 
 module Puma
 
@@ -32,7 +31,6 @@ module Puma
   class Server
     include Puma::Const
     include Request
-    extend Forwardable
 
     attr_reader :thread
     attr_reader :log_writer
@@ -48,9 +46,6 @@ module Puma
     attr_accessor :app
     attr_accessor :binder
 
-    def_delegators :@binder, :add_tcp_listener, :add_ssl_listener,
-      :add_unix_listener, :connected_ports
-
     THREAD_LOCAL_KEY = :puma_server
 
     # Create a server for the rack app +app+.
@@ -86,15 +81,18 @@ module Puma
         UserFileDefaultOptions.new(options, Configuration::DEFAULTS)
       end
 
-      @log_writer          = @options.fetch :log_writer, LogWriter.stdio
-      @early_hints         = @options[:early_hints]
-      @first_data_timeout  = @options[:first_data_timeout]
-      @min_threads         = @options[:min_threads]
-      @max_threads         = @options[:max_threads]
-      @persistent_timeout  = @options[:persistent_timeout]
-      @queue_requests      = @options[:queue_requests]
-      @max_fast_inline     = @options[:max_fast_inline]
-      @io_selector_backend = @options[:io_selector_backend]
+      @clustered                 = (@options.fetch :workers, 0) > 0
+      @worker_write              = @options[:worker_write]
+      @log_writer                = @options.fetch :log_writer, LogWriter.stdio
+      @early_hints               = @options[:early_hints]
+      @first_data_timeout        = @options[:first_data_timeout]
+      @persistent_timeout        = @options[:persistent_timeout]
+      @idle_timeout              = @options[:idle_timeout]
+      @min_threads               = @options[:min_threads]
+      @max_threads               = @options[:max_threads]
+      @queue_requests            = @options[:queue_requests]
+      @max_fast_inline           = @options[:max_fast_inline]
+      @io_selector_backend       = @options[:io_selector_backend]
       @http_content_length_limit = @options[:http_content_length_limit]
 
       # make this a hash, since we prefer `key?` over `include?`
@@ -121,6 +119,8 @@ module Puma
       @precheck_closing = true
 
       @requests_count = 0
+
+      @idle_timeout_reached = false
     end
 
     def inherit_binder(bind)
@@ -330,8 +330,28 @@ module Puma
 
         while @status == :run || (drain && shutting_down?)
           begin
-            ios = IO.select sockets, nil, nil, (shutting_down? ? 0 : nil)
-            break unless ios
+            ios = IO.select sockets, nil, nil, (shutting_down? ? 0 : @idle_timeout)
+            unless ios
+              unless shutting_down?
+                @idle_timeout_reached = true
+
+                if @clustered
+                  @worker_write << "i#{Process.pid}\n" rescue nil
+                  next
+                else
+                  @log_writer.log "- Idle timeout reached"
+                  @status = :stop
+                end
+              end
+
+              break
+            end
+
+            if @idle_timeout_reached && @clustered
+              @idle_timeout_reached = false
+              @worker_write << "i#{Process.pid}\n" rescue nil
+            end
+
             ios.first.each do |sock|
               if sock == check
                 break if handle_check
@@ -367,6 +387,7 @@ module Puma
           @queue_requests = false
           @reactor.shutdown
         end
+
         graceful_shutdown if @status == :stop || @status == :restart
       rescue Exception => e
         @log_writer.unknown_error e, nil, "Exception handling servers"
@@ -476,7 +497,7 @@ module Puma
         end
         true
       rescue StandardError => e
-        client_error(e, client)
+        client_error(e, client, requests)
         # The ensure tries to close +client+ down
         requests > 0
       ensure
@@ -504,22 +525,22 @@ module Puma
     # :nocov:
 
     # Handle various error types thrown by Client I/O operations.
-    def client_error(e, client)
+    def client_error(e, client, requests = 1)
       # Swallow, do not log
       return if [ConnectionError, EOFError].include?(e.class)
 
-      lowlevel_error(e, client.env)
       case e
       when MiniSSL::SSLError
+        lowlevel_error(e, client.env)
         @log_writer.ssl_error e, client.io
       when HttpParserError
-        client.write_error(400)
+        response_to_error(client, requests, e, 400)
         @log_writer.parse_error e, client
       when HttpParserError501
-        client.write_error(501)
+        response_to_error(client, requests, e, 501)
         @log_writer.parse_error e, client
       else
-        client.write_error(500)
+        response_to_error(client, requests, e, 500)
         @log_writer.unknown_error e, nil, "Read"
       end
     end
@@ -541,10 +562,17 @@ module Puma
         backtrace = e.backtrace.nil? ? '<no backtrace available>' : e.backtrace.join("\n")
         [status, {}, ["Puma caught this error: #{e.message} (#{e.class})\n#{backtrace}"]]
       else
-        [status, {}, ["An unhandled lowlevel error occurred. The application logs may have details.\n"]]
+        [status, {}, [""]]
       end
     end
 
+    def response_to_error(client, requests, err, status_code)
+      status, headers, res_body = lowlevel_error(err, client.env, status_code)
+      prepare_response(status, headers, res_body, requests, client)
+      client.write_error(status_code)
+    end
+    private :response_to_error
+
     # Wait for all outstanding requests to finish.
     #
     def graceful_shutdown
@@ -623,5 +651,27 @@ module Puma
     def stats
       STAT_METHODS.map {|name| [name, send(name) || 0]}.to_h
     end
+
+    # below are 'delegations' to binder
+    # remove in Puma 7?
+
+
+    def add_tcp_listener(host, port, optimize_for_latency = true, backlog = 1024)
+      @binder.add_tcp_listener host, port, optimize_for_latency, backlog
+    end
+
+    def add_ssl_listener(host, port, ctx, optimize_for_latency = true,
+                         backlog = 1024)
+      @binder.add_ssl_listener host, port, ctx, optimize_for_latency, backlog
+    end
+
+    def add_unix_listener(path, umask = nil, mode = nil, backlog = 1024)
+      @binder.add_unix_listener path, umask, mode, backlog
+    end
+
+    # @!attribute [r] connected_ports
+    def connected_ports
+      @binder.connected_ports
+    end
   end
 end