puma 4.3.12 → 6.3.1

data/LICENSE

@@ -1,26 +1,29 @@
-Some code copyright (c) 2005, Zed Shaw
-Copyright (c) 2011, Evan Phoenix
+BSD 3-Clause License
+
+Copyright (c) 2019, Evan Phoenix. Some code by Zed Shaw, (c) 2005.
 All rights reserved.
 
-Redistribution and use in source and binary forms, with or without 
+Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 
-* Redistributions of source code must retain the above copyright notice, this
-  list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution.
-* Neither the name of the Evan Phoenix nor the names of its contributors 
-  may be used to endorse or promote products derived from this software 
-  without specific prior written permission.
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/README.md

@@ -2,22 +2,19 @@
   <img src="https://puma.io/images/logos/puma-logo-large.png">
 </p>
 
-# Puma: A Ruby Web Server Built For Concurrency
-
-[![Gitter](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/puma/puma?utm\_source=badge&utm\_medium=badge&utm\_campaign=pr-badge)
-[![Actions Build Status](https://github.com/puma/puma/workflows/Puma/badge.svg)](https://github.com/puma/puma/actions)
-[![Travis Build Status](https://travis-ci.org/puma/puma.svg?branch=master)](https://travis-ci.org/puma/puma)
+# Puma: A Ruby Web Server Built For Parallelism
 
+[![Actions](https://github.com/puma/puma/workflows/Tests/badge.svg?branch=master)](https://github.com/puma/puma/actions?query=workflow%3ATests)
 [![Code Climate](https://codeclimate.com/github/puma/puma.svg)](https://codeclimate.com/github/puma/puma)
-[![SemVer](https://api.dependabot.com/badges/compatibility_score?dependency-name=puma&package-manager=bundler&version-scheme=semver)](https://dependabot.com/compatibility-score.html?dependency-name=puma&package-manager=bundler&version-scheme=semver)
+[![StackOverflow](https://img.shields.io/badge/stackoverflow-Puma-blue.svg)]( https://stackoverflow.com/questions/tagged/puma )
 
-Puma is a **simple, fast, multi-threaded, and highly concurrent HTTP 1.1 server for Ruby/Rack applications**.
+Puma is a **simple, fast, multi-threaded, and highly parallel HTTP 1.1 server for Ruby/Rack applications**.
 
-## Built For Speed &amp; Concurrency
+## Built For Speed &amp; Parallelism
 
-Puma processes requests using a C-optimized Ragel extension (inherited from Mongrel) that provides fast, accurate HTTP 1.1 protocol parsing in a portable way. Puma then serves the request using a thread pool. Each request is served in a separate thread, so truly concurrent Ruby implementations (JRuby, Rubinius) will use all available CPU cores.
+Puma processes requests using a C-optimized Ragel extension (inherited from Mongrel) that provides fast, accurate HTTP 1.1 protocol parsing in a portable way. Puma then serves the request using a thread pool. Each request is served in a separate thread, so truly parallel Ruby implementations (JRuby, Rubinius) will use all available CPU cores.
 
-Puma was designed to be the go-to server for [Rubinius](https://rubinius.com), but also works well with JRuby and MRI.
+Originally designed as a server for [Rubinius](https://github.com/rubinius/rubinius), Puma also works well with Ruby (MRI) and JRuby.
 
 On MRI, there is a Global VM Lock (GVL) that ensures only one thread can run Ruby code at a time. But if you're doing a lot of blocking IO (such as HTTP calls to external APIs like Twitter), Puma still improves MRI's throughput by allowing IO waiting to be done in parallel.
 
@@ -28,7 +25,16 @@ $ gem install puma
 $ puma
 ```
 
-Without arguments, puma will look for a rackup (.ru) file in the current working directory called `config.ru`.
+Without arguments, puma will look for a rackup (.ru) file in
+working directory called `config.ru`.
+
+## SSL Connection Support
+
+Puma will install/compile with support for ssl sockets, assuming OpenSSL
+development files are installed on the system.
+
+If the system does not have OpenSSL development files installed, Puma will
+install/compile, but it will not allow ssl connections.
 
 ## Frameworks
 
@@ -56,19 +62,29 @@ You can run your Sinatra application with Puma from the command line like this:
 $ ruby app.rb -s Puma
 ```
 
-Or you can configure your Sinatra application to always use Puma:
+In order to actually configure Puma using a config file, like `puma.rb`, however, you need to use the `puma` executable. To do this, you must add a rackup file to your Sinatra app:
 
 ```ruby
-require 'sinatra'
-configure { set :server, :puma }
+# config.ru
+require './app'
+run Sinatra::Application
+```
+
+You can then start your application using:
+
+```
+$ bundle exec puma
 ```
 
 ## Configuration
 
-Puma provides numerous options. Consult `puma -h` (or `puma --help`) for a full list of CLI options, or see [dsl.rb](https://github.com/puma/puma/blob/master/lib/puma/dsl.rb).
+Puma provides numerous options. Consult `puma -h` (or `puma --help`) for a full list of CLI options, or see `Puma::DSL` or [dsl.rb](https://github.com/puma/puma/blob/master/lib/puma/dsl.rb).
 
 You can also find several configuration examples as part of the
-[test](test/config) suite.
+[test](https://github.com/puma/puma/tree/master/test/config) suite.
+
+For debugging purposes, you can set the environment variable `PUMA_LOG_CONFIG` with a value
+and the loaded configuration will be printed as part of the boot process.
 
 ### Thread Pool
 
@@ -78,7 +94,7 @@ Puma uses a thread pool. You can set the minimum and maximum number of threads t
 $ puma -t 8:32
 ```
 
-Puma will automatically scale the number of threads, from the minimum until it caps out at the maximum, based on how much traffic is present. The current default is `0:16`. Feel free to experiment, but be careful not to set the number of maximum threads to a large number, as you may exhaust resources on the system (or cause contention for the Global VM Lock, when using MRI).
+Puma will automatically scale the number of threads, from the minimum until it caps out at the maximum, based on how much traffic is present. The current default is `0:16` and on MRI is `0:5`. Feel free to experiment, but be careful not to set the number of maximum threads to a large number, as you may exhaust resources on the system (or cause contention for the Global VM Lock, when using MRI).
 
 Be aware that additionally Puma creates threads on its own for internal purposes (e.g. handling slow clients). So, even if you specify -t 1:1, expect around 7 threads created in your application.
 
@@ -90,15 +106,23 @@ Puma also offers "clustered mode". Clustered mode `fork`s workers from a master
 $ puma -t 8:32 -w 3
 ```
 
+Or with the `WEB_CONCURRENCY` environment variable:
+
+```
+$ WEB_CONCURRENCY=3 puma -t 8:32
+```
+
 Note that threads are still used in clustered mode, and the `-t` thread flag setting is per worker, so `-w 2 -t 16:16` will spawn 32 threads in total, with 16 in each worker process.
 
-In clustered mode, Puma can "preload" your application. This loads all the application code *prior* to forking. Preloading reduces total memory usage of your application via an operating system feature called [copy-on-write](https://en.wikipedia.org/wiki/Copy-on-write) (Ruby 2.0+ only). Use the `--preload` flag from the command line:
+In clustered mode, Puma can "preload" your application. This loads all the application code *prior* to forking. Preloading reduces total memory usage of your application via an operating system feature called [copy-on-write](https://en.wikipedia.org/wiki/Copy-on-write).
+
+If the `WEB_CONCURRENCY` environment variable is set to a value > 1 (and `--prune-bundler` has not been specified), preloading will be enabled by default. Otherwise, you can use the `--preload` flag from the command line:
 
 ```
 $ puma -w 3 --preload
 ```
 
-If you're using a configuration file, use the `preload_app!` method:
+Or, if you're using a configuration file, you can use the `preload_app!` method:
 
 ```ruby
 # config/puma.rb
@@ -106,7 +130,9 @@ workers 3
 preload_app!
 ```
 
-Additionally, you can specify a block in your configuration file that will be run on boot of each worker:
+Preloading can’t be used with phased restart, since phased restart kills and restarts workers one-by-one, and preloading copies the code of master into the workers.
+
+When using clustered mode, you can specify a block in your configuration file that will be run on boot of each worker:
 
 ```ruby
 # config/puma.rb
@@ -119,7 +145,10 @@ This code can be used to setup the process before booting the application, allow
 you to do some Puma-specific things that you don't want to embed in your application.
 For instance, you could fire a log notification that a worker booted or send something to statsd. This can be called multiple times.
 
-`before_fork` specifies a block to be run before workers are forked:
+Constants loaded by your application (such as `Rails`) will not be available in `on_worker_boot`
+unless preloading is enabled.
+
+You can also specify a block to be run before workers are forked, using `before_fork`:
 
 ```ruby
 # config/puma.rb
@@ -128,14 +157,21 @@ before_fork do
 end
 ```
 
-Preloading can’t be used with phased restart, since phased restart kills and restarts workers one-by-one, and preload_app copies the code of master into the workers.
+You can also specify a block to be run after puma is booted using `on_booted`:
+
+```ruby
+# config/puma.rb
+on_booted do
+  # configuration here
+end
+```
 
 ### Error handling
 
 If puma encounters an error outside of the context of your application, it will respond with a 500 and a simple
-textual error message (see `lowlevel_error` in [this file](https://github.com/puma/puma/blob/master/lib/puma/server.rb)).
+textual error message (see `Puma::Server#lowlevel_error` or [server.rb](https://github.com/puma/puma/blob/master/lib/puma/server.rb)).
 You can specify custom behavior for this scenario. For example, you can report the error to your third-party
-error-tracking service (in this example, [rollbar](http://rollbar.com)):
+error-tracking service (in this example, [rollbar](https://rollbar.com)):
 
 ```ruby
 lowlevel_error_handler do |e|
@@ -169,6 +205,38 @@ Need a bit of security? Use SSL sockets:
 ```
 $ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert'
 ```
+#### Self-signed SSL certificates (via the [`localhost`] gem, for development use):
+
+Puma supports the [`localhost`] gem for self-signed certificates. This is particularly useful if you want to use Puma with SSL locally, and self-signed certificates will work for your use-case. Currently, the integration can only be used in MRI.
+
+Puma automatically configures SSL when the [`localhost`] gem is loaded in a `development` environment:
+
+```ruby
+# Add the gem to your Gemfile
+group(:development) do
+  gem 'localhost'
+end
+
+# And require it implicitly using bundler
+require "bundler"
+Bundler.require(:default, ENV["RACK_ENV"].to_sym)
+
+# Alternatively, you can require the gem in config.ru:
+require './app'
+require 'localhost'
+run Sinatra::Application
+```
+
+Additionally, Puma must be listening to an SSL socket:
+
+```shell
+$ puma -b 'ssl://localhost:9292' config.ru
+
+# The following options allow you to reach Puma over HTTP as well:
+$ puma -b ssl://localhost:9292 -b tcp://localhost:9393 config.ru
+```
+
+[`localhost`]: https://github.com/socketry/localhost
 
 #### Controlling SSL Cipher Suites
 
@@ -186,7 +254,7 @@ $ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert&ssl_cipher_fil
 $ puma -b 'ssl://127.0.0.1:9292?keystore=path_to_keystore&keystore-pass=keystore_password&ssl_cipher_list=TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA'
 ```
 
-See https://www.openssl.org/docs/man1.0.2/apps/ciphers.html for cipher filter format and full list of cipher suites.
+See https://www.openssl.org/docs/man1.1.1/man1/ciphers.html for cipher filter format and full list of cipher suites.
 
 Disable TLS v1 with the `no_tlsv1` option:
 
@@ -194,6 +262,47 @@ Disable TLS v1 with the `no_tlsv1` option:
 $ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert&no_tlsv1=true'
 ```
 
+#### Controlling OpenSSL Verification Flags
+
+To enable verification flags offered by OpenSSL, use `verification_flags` (not available for JRuby):
+
+```
+$ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert&verification_flags=PARTIAL_CHAIN'
+```
+
+You can also set multiple verification flags (by separating them with coma):
+
+```
+$ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert&verification_flags=PARTIAL_CHAIN,CRL_CHECK'
+```
+
+List of available flags: `USE_CHECK_TIME`, `CRL_CHECK`, `CRL_CHECK_ALL`, `IGNORE_CRITICAL`, `X509_STRICT`, `ALLOW_PROXY_CERTS`, `POLICY_CHECK`, `EXPLICIT_POLICY`, `INHIBIT_ANY`, `INHIBIT_MAP`, `NOTIFY_POLICY`, `EXTENDED_CRL_SUPPORT`, `USE_DELTAS`, `CHECK_SS_SIGNATURE`, `TRUSTED_FIRST`, `SUITEB_128_LOS_ONLY`, `SUITEB_192_LOS`, `SUITEB_128_LOS`, `PARTIAL_CHAIN`, `NO_ALT_CHAINS`, `NO_CHECK_TIME`
+(see https://www.openssl.org/docs/manmaster/man3/X509_VERIFY_PARAM_set_hostflags.html#VERIFICATION-FLAGS).
+
+#### Controlling OpenSSL Password Decryption
+
+To enable runtime decryption of an encrypted SSL key (not available for JRuby), use `key_password_command`:
+
+```
+$ puma -b 'ssl://127.0.0.1:9292?key=path_to_key&cert=path_to_cert&key_password_command=/path/to/command.sh'
+```
+
+`key_password_command` must:
+
+1. Be executable by Puma.
+2. Print the decryption password to stdout.
+
+ For example:
+
+```shell
+#!/bin/sh
+
+echo "this is my password"
+```
+
+`key_password_command` can be used with `key` or `key_pem`. If the key
+is not encrypted, the executable will not be called.
+
 ### Control/Status Server
 
 Puma has a built-in status and control app that can be used to query and control Puma.
@@ -202,7 +311,7 @@ Puma has a built-in status and control app that can be used to query and control
 $ puma --control-url tcp://127.0.0.1:9293 --control-token foo
 ```
 
-Puma will start the control server on localhost port 9293. All requests to the control server will need to include control token (in this case, `token=foo`) as a query parameter. This allows for simple authentication. Check out [status.rb](https://github.com/puma/puma/blob/master/lib/puma/app/status.rb) to see what the status app has available.
+Puma will start the control server on localhost port 9293. All requests to the control server will need to include control token (in this case, `token=foo`) as a query parameter. This allows for simple authentication. Check out `Puma::App::Status` or [status.rb](https://github.com/puma/puma/blob/master/lib/puma/app/status.rb) to see what the status app has available.
 
 You can also interact with the control server via `pumactl`. This command will restart Puma:
 
@@ -220,27 +329,31 @@ You can also provide a configuration file with the `-C` (or `--config`) flag:
 $ puma -C /path/to/config
 ```
 
-If no configuration file is specified, Puma will look for a configuration file at `config/puma.rb`. If an environment is specified, either via the `-e` and `--environment` flags, or through the `RACK_ENV` environment variable, Puma looks for configuration at `config/puma/<environment_name>.rb`.
+If no configuration file is specified, Puma will look for a configuration file at `config/puma.rb`. If an environment is specified (via the `--environment` flag or through the `APP_ENV`, `RACK_ENV`, or `RAILS_ENV` environment variables) Puma looks for a configuration file at `config/puma/<environment_name>.rb` and then falls back to `config/puma.rb`.
 
-If you want to prevent Puma from looking for a configuration file in those locations, provide a dash as the argument to the `-C` (or `--config`) flag:
+If you want to prevent Puma from looking for a configuration file in those locations, include the `--no-config` flag:
 
 ```
+$ puma --no-config
+
+# or
+
 $ puma -C "-"
 ```
 
-The other side-effects of setting the environment are whether to show stack traces (in `development` or `test`), and setting RACK_ENV may potentially affect middleware looking for this value to change their behavior. The default puma RACK_ENV value is `development`. You can see all config default values [here](https://github.com/puma/puma/blob/12d1706ddc71b89ed2ee26275e31c788e94ff541/lib/puma/configuration.rb#L170).
+The other side-effects of setting the environment are whether to show stack traces (in `development` or `test`), and setting RACK_ENV may potentially affect middleware looking for this value to change their behavior. The default puma RACK_ENV value is `development`. You can see all config default values in `Puma::Configuration#puma_default_options` or [configuration.rb](https://github.com/puma/puma/blob/61c6213fbab/lib/puma/configuration.rb#L182-L204).
 
-Check out [dsl.rb](https://github.com/puma/puma/blob/master/lib/puma/dsl.rb) to see all available options.
+Check out `Puma::DSL` or [dsl.rb](https://github.com/puma/puma/blob/master/lib/puma/dsl.rb) to see all available options.
 
 ## Restart
 
 Puma includes the ability to restart itself. When available (MRI, Rubinius, JRuby), Puma performs a "hot restart". This is the same functionality available in *Unicorn* and *NGINX* which keep the server sockets open between restarts. This makes sure that no pending requests are dropped while the restart is taking place.
 
-For more, see the [restart documentation](https://github.com/puma/puma/blob/master/docs/restart.md).
+For more, see the [Restart documentation](docs/restart.md).
 
 ## Signals
 
-Puma responds to several signals. A detailed guide to using UNIX signals with Puma can be found in the [signals documentation](https://github.com/puma/puma/blob/master/docs/signals.md).
+Puma responds to several signals. A detailed guide to using UNIX signals with Puma can be found in the [Signals documentation](docs/signals.md).
 
 ## Platform Constraints
 
@@ -248,10 +361,11 @@ Some platforms do not support all Puma features.
 
   * **JRuby**, **Windows**: server sockets are not seamless on restart, they must be closed and reopened. These platforms have no way to pass descriptors into a new process that is exposed to Ruby. Also, cluster mode is not supported due to a lack of fork(2).
   * **Windows**: Cluster mode is not supported due to a lack of fork(2).
+  * **Kubernetes**: The way Kubernetes handles pod shutdowns interacts poorly with server processes implementing graceful shutdown, like Puma. See the [kubernetes section of the documentation](docs/kubernetes.md) for more details.
 
 ## Known Bugs
 
-For MRI versions 2.2.7, 2.2.8, 2.2.9, 2.2.10 2.3.4 and 2.4.1, you may see ```stream closed in another thread (IOError)```. It may be caused by a [Ruby bug](https://bugs.ruby-lang.org/issues/13632). It can be fixed with the gem https://rubygems.org/gems/stopgap_13632:
+For MRI versions 2.2.7, 2.2.8, 2.2.9, 2.2.10, 2.3.4 and 2.4.1, you may see ```stream closed in another thread (IOError)```. It may be caused by a [Ruby bug](https://bugs.ruby-lang.org/issues/13632). It can be fixed with the gem https://rubygems.org/gems/stopgap_13632:
 
 ```ruby
 if %w(2.2.7 2.2.8 2.2.9 2.2.10 2.3.4 2.4.1).include? RUBY_VERSION
@@ -264,27 +378,37 @@ end
 
 ## Deployment
 
-Puma has support for Capistrano with an [external gem](https://github.com/seuros/capistrano-puma).
+ * Puma has support for Capistrano with an [external gem](https://github.com/seuros/capistrano-puma).
 
-It is common to use process monitors with Puma. Modern process monitors like systemd or upstart
-provide continuous monitoring and restarts for increased
-reliability in production environments:
+ * Additionally, Puma has support for built-in daemonization via the [puma-daemon](https://github.com/kigster/puma-daemon) ruby gem. The gem restores the `daemonize` option that was removed from Puma starting version 5, but only for MRI Ruby.
 
-* [tools/jungle](https://github.com/puma/puma/tree/master/tools/jungle) for sysvinit (init.d) and upstart
-* [docs/systemd](https://github.com/puma/puma/blob/master/docs/systemd.md)
 
-## Community Plugins
+It is common to use process monitors with Puma. Modern process monitors like systemd or rc.d
+provide continuous monitoring and restarts for increased reliability in production environments:
+
+* [rc.d](docs/jungle/rc.d/README.md)
+* [systemd](docs/systemd.md)
+
+Community guides:
+
+* [Deploying Puma on OpenBSD using relayd and httpd](https://gist.github.com/anon987654321/4532cf8d6c59c1f43ec8973faa031103)
+
+## Community Extensions
+
+### Plugins
 
-* [puma-heroku](https://github.com/evanphx/puma-heroku) — default Puma configuration for running on Heroku
 * [puma-metrics](https://github.com/harmjanblok/puma-metrics) — export Puma metrics to Prometheus
 * [puma-plugin-statsd](https://github.com/yob/puma-plugin-statsd) — send Puma metrics to statsd
-* [puma-plugin-systemd](https://github.com/sj26/puma-plugin-systemd) — deeper integration with systemd for notify, status and watchdog
+* [puma-plugin-systemd](https://github.com/sj26/puma-plugin-systemd) — deeper integration with systemd for notify, status and watchdog. Puma 5.1.0 integrated notify and watchdog, which probably conflicts with this plugin. Puma 6.1.0 added status support which obsoletes the plugin entirely.
+* [puma-plugin-telemetry](https://github.com/babbel/puma-plugin-telemetry) - telemetry plugin for Puma offering various targets to publish
 
-## Contributing
+### Monitoring
 
-Find details for contributing in the [contribution guide].
+* [puma-status](https://github.com/ylecuyer/puma-status) — Monitor CPU/Mem/Load of running puma instances from the CLI
+
+## Contributing
 
-[contribution guide]: https://github.com/puma/puma/blob/master/CONTRIBUTING.md
+Find details for contributing in the [contribution guide](CONTRIBUTING.md).
 
 ## License
 

data/bin/puma-wild

@@ -5,24 +5,18 @@
 
 require 'rubygems'
 
-gems = ARGV.shift
+cli_arg = ARGV.shift
 
 inc = ""
 
-if gems == "-I"
+if cli_arg == "-I"
   inc = ARGV.shift
   $LOAD_PATH.concat inc.split(":")
-  gems = ARGV.shift
-end
-
-gems.split(",").each do |s|
-  name, ver = s.split(":",2)
-  gem name, ver
 end
 
 module Puma; end
 
-Puma.const_set("WILD_ARGS", ["-I", inc, gems])
+Puma.const_set(:WILD_ARGS, ["-I", inc])
 
 require 'puma/cli'
 

data/docs/architecture.md

@@ -2,36 +2,73 @@
 
 ## Overview
 
-![http://bit.ly/2iJuFky](images/puma-general-arch.png)
+![https://bit.ly/2iJuFky](images/puma-general-arch.png)
 
-Puma is a threaded web server, processing requests across a TCP or UNIX socket.
+Puma is a threaded Ruby HTTP application server processing requests across a TCP
+and/or UNIX socket.
 
-Workers accept connections from the socket and a thread in the worker's thread pool processes the client's request.
 
-Clustered mode is shown/discussed here. Single mode is analogous to having a single worker process.
+Puma processes (there can be one or many) accept connections from the socket via
+a thread (in the [`Reactor`](../lib/puma/reactor.rb) class). The connection,
+once fully buffered and read, moves into the `todo` list, where an available
+thread will pick it up (in the [`ThreadPool`](../lib/puma/thread_pool.rb)
+class).
 
-## Connection pipeline
+Puma works in two main modes: cluster and single. In single mode, only one Puma
+process boots. In cluster mode, a `master` process is booted, which prepares
+(and may boot) the application and then uses the `fork()` system call to create
+one or more `child` processes. These `child` processes all listen to the same
+socket. The `master` process does not listen to the socket or process requests -
+its purpose is primarily to manage and listen for UNIX signals and possibly kill
+or boot `child` processes.
 
-![http://bit.ly/2zwzhEK](images/puma-connection-flow.png)
+We sometimes call `child` processes (or Puma processes in `single` mode)
+_workers_, and we sometimes call the threads created by Puma's
+[`ThreadPool`](../lib/puma/thread_pool.rb) _worker threads_.
+
+## How Requests Work
+
+![https://bit.ly/2zwzhEK](images/puma-connection-flow.png)
 
 * Upon startup, Puma listens on a TCP or UNIX socket.
-  * The backlog of this socket is configured (with a default of 1024), determining how many established but unaccepted connections can exist concurrently.
-  * This socket backlog is distinct from the "backlog" of work as reported by the control server stats. The latter is the number of connections in that worker's "todo" set waiting for a worker thread.
-* By default, a single, separate thread is used to receive HTTP requests across the socket.
-  * When at least one worker thread is available for work, a connection is accepted and placed in this request buffer
-  * This thread waits for entire HTTP requests to be received over the connection
-    * The time spent waiting for the HTTP request body to be received is exposed to the Rack app as `env['puma.request_body_wait']` (milliseconds)
-  * Once received, the connection is pushed into the "todo" set
-* Worker threads pop work off the "todo" set for processing
-  * The thread processes the request via the rack application (which generates the HTTP response)
-  * The thread writes the response to the connection
-  * Finally, the thread become available to process another connection in the "todo" set
-
-### Disabling `queue_requests`
-
-![http://bit.ly/2zxCJ1Z](images/puma-connection-flow-no-reactor.png)
-
-The `queue_requests` option is `true` by default, enabling the separate thread used to buffer requests as described above.
-
-If set to `false`, this buffer will not be used for connections while waiting for the request to arrive.
-In this mode, when a connection is accepted, it is added to the "todo" queue immediately, and a worker will synchronously do any waiting necessary to read the HTTP request from the socket.
+  * The backlog of this socket is configured with a default of 1024, but the
+    actual backlog value is capped by the `net.core.somaxconn` sysctl value.
+    The backlog determines the size of the queue for unaccepted connections. If
+    the backlog is full, the operating system is not accepting new connections.
+  * This socket backlog is distinct from the `backlog` of work as reported by
+    `Puma.stats` or the control server. The backlog that `Puma.stats` refers to
+    represents the number of connections in the process' `todo` set waiting for
+    a thread from the [`ThreadPool`](../lib/puma/thread_pool.rb).
+* By default, a single, separate thread (created by the
+  [`Reactor`](../lib/puma/reactor.rb) class) reads and buffers requests from the
+  socket.
+  * When at least one worker thread is available for work, the reactor thread
+    listens to the socket and accepts a request (if one is waiting).
+  * The reactor thread waits for the entire HTTP request to be received.
+    * Puma exposes the time spent waiting for the HTTP request body to be
+      received to the Rack app as `env['puma.request_body_wait']`
+      (milliseconds).
+  * Once fully buffered and received, the connection is pushed into the "todo"
+    set.
+* Worker threads pop work off the "todo" set for processing.
+  * The worker thread processes the request via `call`ing the configured Rack
+    application. The Rack application generates the HTTP response.
+  * The worker thread writes the response to the connection. While Puma buffers
+    requests via a separate thread, it does not use a separate thread for
+    responses.
+  * Once done, the thread becomes available to process another connection in the
+    "todo" set.
+
+### `queue_requests`
+
+![https://bit.ly/2zxCJ1Z](images/puma-connection-flow-no-reactor.png)
+
+The `queue_requests` option is `true` by default, enabling the separate reactor
+thread used to buffer requests as described above.
+
+If set to `false`, this buffer will not be used for connections while waiting
+for the request to arrive.
+
+In this mode, when a connection is accepted, it is added to the "todo" queue
+immediately, and a worker will synchronously do any waiting necessary to read
+the HTTP request from the socket.

data/docs/compile_options.md

@@ -0,0 +1,55 @@
+# Compile Options
+
+There are some `cflags` provided to change Puma's default configuration for its
+C extension.
+
+## Query String, `PUMA_QUERY_STRING_MAX_LENGTH`
+
+By default, the max length of `QUERY_STRING` is `1024 * 10`. But you may want to
+adjust it to accept longer queries in GET requests.
+
+For manual install, pass the `PUMA_QUERY_STRING_MAX_LENGTH` option like this:
+
+```
+gem install puma -- --with-cflags="-D PUMA_QUERY_STRING_MAX_LENGTH=64000"
+```
+
+For Bundler, use its configuration system:
+
+```
+bundle config build.puma "--with-cflags='-D PUMA_QUERY_STRING_MAX_LENGTH=64000'"
+```
+
+## Request Path, `PUMA_REQUEST_PATH_MAX_LENGTH`
+
+By default, the max length of `REQUEST_PATH` is `8192`. But you may want to
+adjust it to accept longer paths in requests.
+
+For manual install, pass the `PUMA_REQUEST_PATH_MAX_LENGTH` option like this:
+
+```
+gem install puma -- --with-cflags="-D PUMA_REQUEST_PATH_MAX_LENGTH=64000"
+```
+
+For Bundler, use its configuration system:
+
+```
+bundle config build.puma "--with-cflags='-D PUMA_REQUEST_PATH_MAX_LENGTH=64000'"
+```
+
+## Request URI, `PUMA_REQUEST_URI_MAX_LENGTH`
+
+By default, the max length of `REQUEST_URI` is `1024 * 12`. But you may want to
+adjust it to accept longer URIs in requests.
+
+For manual install, pass the `PUMA_REQUEST_URI_MAX_LENGTH` option like this:
+
+```
+gem install puma -- --with-cflags="-D PUMA_REQUEST_URI_MAX_LENGTH=64000"
+```
+
+For Bundler, use its configuration system:
+
+```
+bundle config build.puma "--with-cflags='-D PUMA_REQUEST_URI_MAX_LENGTH=64000'"
+```