puma 0.8.2 → 0.9.0

data/examples/httpd.conf

@@ -1,474 +0,0 @@
-#
-# This is the main Apache HTTP server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
-# In particular, see 
-# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
-# server as "/usr/local/apache2/logs/foo.log".
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# Do not add a slash at the end of the directory path.  If you point
-# ServerRoot at a non-local disk, be sure to point the LockFile directive
-# at a local disk.  If you wish to share the same ServerRoot for multiple
-# httpd daemons, you will need to change at least LockFile and PidFile.
-#
-ServerRoot "/usr/local/apache2"
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to 
-# prevent Apache from glomming onto all bound IP addresses.
-#
-#Listen 12.34.56.78:80
-Listen 8088
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-
-LoadModule deflate_module modules/mod_deflate.so
-LoadModule expires_module modules/mod_expires.so
-LoadModule headers_module modules/mod_headers.so
-LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule proxy_module modules/mod_proxy.so
-LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
-LoadModule proxy_http_module modules/mod_proxy_http.so
-LoadModule rewrite_module modules/mod_rewrite.so
-LoadModule version_module modules/mod_version.so
-LoadModule vhost_alias_module modules/mod_vhost_alias.so
-
-<IfModule !mpm_netware_module>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# It is usually good practice to create a dedicated user and group for
-# running httpd, as with most system services.
-#
-User www-data
-Group www-data
-</IfModule>
-
-# 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.  e.g. admin@your-domain.com
-#
-ServerAdmin admin@SERVER
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-#
-ServerName SERVER:8088
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/usr/local/apache2/htdocs"
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# features.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-    Order deny,allow
-    Deny from all
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/usr/local/apache2/htdocs">
-    #
-    # Possible values for the Options directive are "None", "All",
-    # or any combination of:
-    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
-    #
-    # Note that "MultiViews" must be named *explicitly* --- "Options All"
-    # doesn't give it to you.
-    #
-    # The Options directive is both complicated and important.  Please see
-    # http://httpd.apache.org/docs/2.2/mod/core.html#options
-    # for more information.
-    #
-    Options Indexes FollowSymLinks
-
-    #
-    # AllowOverride controls what directives may be placed in .htaccess files.
-    # It can be "All", "None", or any combination of the keywords:
-    #   Options FileInfo AuthConfig Limit
-    #
-    AllowOverride None
-
-    #
-    # Controls who can get stuff from this server.
-    #
-    Order allow,deny
-    Allow from all
-
-</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-<IfModule dir_module>
-    DirectoryIndex index.html
-</IfModule>
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being 
-# viewed by Web clients. 
-#
-<FilesMatch "^\.ht">
-    Order allow,deny
-    Deny from all
-    Satisfy All
-</FilesMatch>
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog logs/error_log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-<IfModule log_config_module>
-    #
-    # The following directives define some format nicknames for use with
-    # a CustomLog directive (see below).
-    #
-    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-    LogFormat "%h %l %u %t \"%r\" %>s %b" common
-
-    <IfModule logio_module>
-      # You need to enable mod_logio.c to use %I and %O
-      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
-    </IfModule>
-
-    #
-    # The location and format of the access logfile (Common Logfile Format).
-    # If you do not define any access logfiles within a <VirtualHost>
-    # container, they will be logged here.  Contrariwise, if you *do*
-    # define per-<VirtualHost> access logfiles, transactions will be
-    # logged therein and *not* in this file.
-    #
-    CustomLog logs/access_log common
-
-    #
-    # If you prefer a logfile with access, agent, and referer information
-    # (Combined Logfile Format) you can use the following directive.
-    #
-    #CustomLog logs/access_log combined
-</IfModule>
-
-<IfModule alias_module>
-    #
-    # Redirect: Allows you to tell clients about documents that used to 
-    # exist in your server's namespace, but do not anymore. The client 
-    # will make a new request for the document at its new location.
-    # Example:
-    # Redirect permanent /foo http://www.example.com/bar
-
-    #
-    # Alias: Maps web paths into filesystem paths and is used to
-    # access content that does not live under the DocumentRoot.
-    # Example:
-    # Alias /webpath /full/filesystem/path
-    #
-    # If you include a trailing / on /webpath then the server will
-    # require it to be present in the URL.  You will also likely
-    # need to provide a <Directory> section to allow access to
-    # the filesystem path.
-
-    #
-    # ScriptAlias: This controls which directories contain server scripts. 
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the target directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the
-    # client.  The same rules about trailing "/" apply to ScriptAlias
-    # directives as to Alias.
-    #
-    ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
-
-</IfModule>
-
-<IfModule cgid_module>
-    #
-    # ScriptSock: On threaded servers, designate the path to the UNIX
-    # socket used to communicate with the CGI daemon of mod_cgid.
-    #
-    #Scriptsock logs/cgisock
-</IfModule>
-
-#
-# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/usr/local/apache2/cgi-bin">
-    AllowOverride None
-    Options None
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# DefaultType: the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-<IfModule mime_module>
-    #
-    # TypesConfig points to the file containing the list of mappings from
-    # filename extension to MIME-type.
-    #
-    TypesConfig conf/mime.types
-
-    #
-    # AddType allows you to add to or override the MIME configuration
-    # file specified in TypesConfig for specific file types.
-    #
-    #AddType application/x-gzip .tgz
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    #
-    #AddEncoding x-compress .Z
-    #AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    AddType application/x-compress .Z
-    AddType application/x-gzip .gz .tgz
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers":
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action directive (see below)
-    #
-    # To use CGI scripts outside of ScriptAliased directories:
-    # (You will also need to add "ExecCGI" to the "Options" directive.)
-    #
-    #AddHandler cgi-script .cgi
-
-    # For type maps (negotiated resources):
-    #AddHandler type-map var
-
-    #
-    # Filters allow you to process content before it is sent to the client.
-    #
-    # To parse .shtml files for server-side includes (SSI):
-    # (You will also need to add "Includes" to the "Options" directive.)
-    #
-    #AddType text/html .shtml
-    #AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-#MIMEMagicFile conf/magic
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# EnableMMAP and EnableSendfile: On systems that support it, 
-# memory-mapping or the sendfile syscall is used to deliver
-# files.  This usually improves server performance, but must
-# be turned off when serving from networked-mounted 
-# filesystems or if support for these functions is otherwise
-# broken on your system.
-#
-#EnableMMAP off
-EnableSendfile on
-
-# Supplemental configuration
-#
-# The configuration files in the conf/extra/ directory can be 
-# included to add extra features or to modify the default configuration of 
-# the server, or you may simply copy their contents here and change as 
-# necessary.
-
-# Server-pool management (MPM specific)
-#Include conf/extra/httpd-mpm.conf
-
-# Multi-language error messages
-#Include conf/extra/httpd-multilang-errordoc.conf
-
-# Fancy directory listings
-#Include conf/extra/httpd-autoindex.conf
-
-# Language settings
-#Include conf/extra/httpd-languages.conf
-
-# User home directories
-#Include conf/extra/httpd-userdir.conf
-
-# Real-time info on requests and configuration
-#Include conf/extra/httpd-info.conf
-
-# Virtual hosts
-#Include conf/extra/httpd-vhosts.conf
-
-# Local access to the Apache HTTP Server Manual
-#Include conf/extra/httpd-manual.conf
-
-# Distributed authoring and versioning (WebDAV)
-#Include conf/extra/httpd-dav.conf
-
-# Various default settings
-#Include conf/extra/httpd-default.conf
-
-# Secure (SSL/TLS) connections
-#Include conf/extra/httpd-ssl.conf
-#
-# Note: The following must must be present to support
-#       starting without SSL on platforms with no /dev/random equivalent
-#       but a statically compiled-in mod_ssl.
-#
-<IfModule ssl_module>
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
-</IfModule>
-
-<VirtualHost *:8088>
-  ServerName SERVER
-  DocumentRoot /var/rails/MYAPP/public
-
-  <Directory "/var/rails/MYAPP/public">
-    Options FollowSymLinks
-    AllowOverride None
-    Order allow,deny
-    Allow from all
-  </Directory>
-
-  # Configure mongrel_cluster 
-  <Proxy balancer://mongrel_cluster>
-    BalancerMember http://127.0.0.1:8000
-    BalancerMember http://127.0.0.1:8001
-  </Proxy>
-
-  RewriteEngine On
-
-  # Uncomment for rewrite debugging 
-  #RewriteLog logs/your_app_rewrite_log
-  #RewriteLogLevel 9 
-
-  # Check for maintenance file and redirect all requests
-  RewriteCond %{DOCUMENT_ROOT}/system/maintenance.html -f
-  RewriteCond %{SCRIPT_FILENAME} !maintenance.html
-  RewriteRule ^.*$ /system/maintenance.html [L]
-
-  # Rewrite index to check for static
-  RewriteRule ^/$ /index.html [QSA] 
-
-  # Rewrite to check for Rails cached page
-  RewriteRule ^([^.]+)$ $1.html [QSA]
-
-  # Redirect all non-static requests to cluster
-  RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f
-  RewriteRule ^/(.*)$ balancer://mongrel_cluster%{REQUEST_URI} [P,QSA,L]
-
-  # Deflate
-  AddOutputFilterByType DEFLATE text/html text/plain text/xml
-  BrowserMatch ^Mozilla/4 gzip-only-text/html
-  BrowserMatch ^Mozilla/4\.0[678] no-gzip
-  BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
-
-  # Uncomment for deflate debugging
-  #DeflateFilterNote Input input_info
-  #DeflateFilterNote Output output_info
-  #DeflateFilterNote Ratio ratio_info
-  #LogFormat '"%r" %{output_info}n/%{input_info}n (%{ratio_info}n%%)' deflate
-  #CustomLog logs/your_app_deflate_log deflate
-
-  ErrorLog logs/your_app_error_log
-  CustomLog logs/your_access_log combined
-</VirtualHost>
-
-