pry 0.9.7.4-java → 0.9.8-java

data/lib/pry/extended_commands/user_command_api.rb

@@ -1,65 +0,0 @@
-class Pry
-  module ExtendedCommands
-
-    UserCommandAPI = Pry::CommandSet.new do
-
-      command "define-command", "Define a command in the session, use same syntax as `command` method for command API" do |arg|
-        if arg.nil?
-          raise CommandError, "Provide an arg!"
-        end
-
-        prime_string = "command #{arg_string}\n"
-        command_string = _pry_.r(target, prime_string)
-
-        eval_string.replace <<-HERE
-          _pry_.commands.instance_eval do
-            #{command_string}
-          end
-        HERE
-
-      end
-
-      command "reload-command", "Reload a command. reload-command CMD_NAME CMD_SET" do |command_name, set_name|
-        if command_name.nil?
-          raise CommandError, "Must provide command name"
-        end
-
-        if set_name.nil?
-          raise CommandError, "Must provide command set name"
-        end
-
-        cmd = Pry.config.commands.commands[command_name]
-        file_name = cmd.block.source_location.first
-
-        silence_warnings do
-          load file_name
-        end
-        Pry.config.commands.import target.eval(set_name)
-        _pry_.commands.import target.eval(set_name)
-        set_file_and_dir_locals(file_name)
-      end
-
-      command "edit-command", "Edit a command. edit-command CMD_NAME CMD_SET" do |command_name, set_name|
-        if command_name.nil?
-          raise CommandError, "Must provide command name"
-        end
-
-        if set_name.nil?
-          raise CommandError, "Must provide command set name"
-        end
-
-        cmd = Pry.config.commands.commands[command_name]
-        file_name = cmd.block.source_location.first
-
-        invoke_editor(*cmd.block.source_location)
-        silence_warnings do
-          load file_name
-        end
-        Pry.config.commands.import target.eval(set_name)
-        _pry_.commands.import target.eval(set_name)
-        set_file_and_dir_locals(file_name)
-      end
-
-    end
-  end
-end

data/test/test_command_processor.rb

@@ -1,176 +0,0 @@
-require 'helper'
-
-describe "Pry::CommandProcessor" do
-  before do
-    @pry = Pry.new
-    @pry.commands = Pry::CommandSet.new
-    @command_processor = Pry::CommandProcessor.new(@pry)
-  end
-
-  after do
-    @pry.commands = Pry::CommandSet.new
-  end
-
-  it 'should accurately determine if a command is valid' do
-    @pry.commands.command("test-command") {}
-    valid = @command_processor.valid_command? "test-command"
-    valid.should == true
-
-    valid = @command_processor.valid_command? "blah"
-    valid.should == false
-  end
-
-  it 'should correctly match a simple string command' do
-    @pry.commands.command("test-command") {}
-    command, captures, pos = @command_processor.command_matched "test-command", binding
-
-    command.name.should == "test-command"
-    captures.should == []
-    pos.should == "test-command".length
-  end
-
-  it 'should correctly match a simple string command with parameters' do
-    @pry.commands.command("test-command") { |arg|}
-    command, captures, pos = @command_processor.command_matched "test-command hello", binding
-
-    command.name.should == "test-command"
-    captures.should == []
-    pos.should == "test-command".length
-  end
-
-  it 'should not match when the relevant command does not exist' do
-    command, captures, pos = @command_processor.command_matched "test-command", binding
-
-    command.should == nil
-    captures.should == nil
-  end
-
-  it 'should correctly match a regex command' do
-    @pry.commands.command(/rue(.?)/) { }
-    command, captures, pos = @command_processor.command_matched "rue hello", binding
-
-    command.name.should == /rue(.?)/
-    captures.should == [""]
-    pos.should == 3
-  end
-
-  it 'should correctly match a regex command and extract the capture groups' do
-    @pry.commands.command(/rue(.?)/) { }
-    command, captures, pos = @command_processor.command_matched "rue5 hello", binding
-
-    command.name.should == /rue(.?)/
-    captures.should == ["5"]
-    pos.should == 4
-  end
-
-  it 'should correctly match a string command with spaces in its name' do
-    @pry.commands.command("test command") {}
-    command, captures, pos = @command_processor.command_matched "test command", binding
-
-    command.name.should == "test command"
-    captures.should == []
-    pos.should == command.name.length
-  end
-
-  it 'should correctly match a string command with spaces in its name with parameters' do
-    @pry.commands.command("test command") {}
-    command, captures, pos = @command_processor.command_matched "test command param1 param2", binding
-
-    command.name.should == "test command"
-    captures.should == []
-    pos.should == command.name.length
-  end
-
-  it 'should correctly match a command preceded by the command_prefix if one is defined' do
-    Pry.config.command_prefix = "%"
-
-    @pry.commands.command("test-command") {}
-    command, captures, pos = @command_processor.command_matched "%test-command hello", binding
-
-    command.name.should == "test-command"
-    captures.should == []
-    pos.should == "test-command".length + "%".length
-
-    Pry.config.command_prefix = ''
-  end
-
-  it 'should not match a command not preceded by the command_prefix if one is defined' do
-    Pry.config.command_prefix = "%"
-
-    @pry.commands.command("test-command") {}
-    command, captures, pos = @command_processor.command_matched "test-command hello", binding
-
-    command.should == nil
-    captures.should == nil
-
-    Pry.config.command_prefix = ''
-  end
-
-  it 'should match a command preceded by the command_prefix when :use_prefix => false' do
-    Pry.config.command_prefix = "%"
-
-    @pry.commands.command("test-command", "", :use_prefix => false) {}
-    command, captures, pos = @command_processor.command_matched "%test-command hello", binding
-
-    command.name.should == "test-command"
-    captures.should == []
-    pos.should == "test-command".length + "%".length
-
-    Pry.config.command_prefix = ''
-  end
-
-  it 'should match a command not preceded by the command_prefix when :use_prefix => false' do
-    Pry.config.command_prefix = "%"
-
-    @pry.commands.command("test-command", "", :use_prefix => false) {}
-    command, captures, pos = @command_processor.command_matched "test-command hello", binding
-
-    command.name.should == "test-command"
-    captures.should == []
-    pos.should == "test-command".length
-
-    Pry.config.command_prefix = ''
-  end
-
-  it 'should correctly match a regex command with spaces in its name' do
-    regex_command_name = /test\s+(.+)\s+command/
-    @pry.commands.command(regex_command_name) {}
-
-    sample_text = "test friendship command"
-    command, captures, pos = @command_processor.command_matched sample_text, binding
-
-    command.name.should == regex_command_name
-    captures.should == ["friendship"]
-    pos.should == sample_text.size
-  end
-
-  it 'should correctly match a complex regex command' do
-    regex_command_name = /\.(.*)/
-    @pry.commands.command(regex_command_name) {}
-
-    sample_text = ".cd ~/pry"
-    command, captures, pos = @command_processor.command_matched sample_text, binding
-
-    command.name.should == regex_command_name
-    captures.should == ["cd ~/pry"]
-    pos.should == sample_text.size
-  end
-
-  it 'should not interpolate commands that have :interpolate => false (interpolate_string should *not* be called)' do
-    @pry.commands.command("boast", "", :interpolate => false) {}
-
-    # remember to use '' instead of "" when testing interpolation or
-    # you'll cause yourself incredible confusion
-    lambda { @command_processor.command_matched('boast #{c}', binding) }.should.not.raise NameError
-  end
-
-  it 'should only execute the contents of an interpolation once' do
-    $obj = 'a'
-
-    redirect_pry_io(InputTester.new('cat #{$obj.succ!}'), StringIO.new) do
-      Pry.new.rep
-    end
-
-    $obj.should == 'b'
-  end
-end