pry 0.9.10pre1-i386-mswin32 → 0.9.11-i386-mswin32

data/lib/pry/default_commands/easter_eggs.rb

@@ -1,95 +0,0 @@
-class Pry
-  module DefaultCommands
-
-    EasterEggs = Pry::CommandSet.new do
-
-      command "nyan-cat", "", :requires_gem => ["nyancat"] do
-        run ".nyancat"
-      end
-
-      command(/!s\/(.*?)\/(.*?)/, "") do |source, dest|
-        eval_string.gsub!(/#{source}/) { dest }
-        run "show-input"
-      end
-
-      command "get-naked", "" do
-        text = %{
---
-We dont have to take our clothes off to have a good time.
-We could dance & party all night And drink some cherry wine.
--- Jermaine Stewart }
-        output.puts text
-        text
-      end
-
-      command "east-coker", "" do
-        text = %{
---
-Now the light falls
-Across the open field, leaving the deep lane
-Shuttered with branches, dark in the afternoon,
-Where you lean against a bank while a van passes,
-And the deep lane insists on the direction
-Into the village, in the electric heat
-Hypnotised. In a warm haze the sultry light
-Is absorbed, not refracted, by grey stone.
-The dahlias sleep in the empty silence.
-Wait for the early owl.
--- T.S Eliot
-            }
-        output.puts text
-        text
-      end
-
-      command "cohen-poem", "" do
-        text = %{
---
-When this American woman,
-whose thighs are bound in casual red cloth,
-comes thundering past my sitting place
-like a forest-burning Mongol tribe,
-the city is ravished
-and brittle buildings of a hundred years
-splash into the street;
-and my eyes are burnt
-for the embroidered Chinese girls,
-already old,
-and so small between the thin pines
-on these enormous landscapes,
-that if you turn your head
-they are lost for hours.
-                  -- Leonard Cohen
-                }
-  output.puts text
-  text
-end
-
-      command "test-ansi", "" do
-        prev_color = Pry.color
-        Pry.color = true
-
-        picture = unindent <<-'EOS'.gsub(/[[:alpha:]!]/) { |s| text.red(s) }
-           ____      _______________________
-          /    \    |  A         W     G    |
-         / O  O \   |   N    I    O   N !   |
-        |        |  |    S    S    R I   !  |
-         \ \__/ / __|     I         K     ! |
-          \____/   \________________________|
-        EOS
-
-        if windows_ansi?
-          move_up = proc { |n| "\e[#{n}F" }
-        else
-          move_up = proc { |n| "\e[#{n}A\e[0G" }
-        end
-
-        output.puts "\n" * 6
-        output.puts picture.lines.map(&:chomp).reverse.join(move_up[1])
-        output.puts "\n" * 6
-        output.puts "** ENV['TERM'] is #{ENV['TERM']} **\n\n"
-
-        Pry.color = prev_color
-      end
-    end
-  end
-end

data/lib/pry/default_commands/editing.rb

@@ -1,420 +0,0 @@
-require 'tempfile'
-require 'shellwords'
-require 'pry/default_commands/hist'
-
-class Pry
-  module DefaultCommands
-
-    Editing = Pry::CommandSet.new do
-      import Hist
-
-      create_command "!", "Clear the input buffer. Useful if the parsing process goes wrong and you get stuck in the read loop.", :use_prefix => false do
-        def process
-          output.puts "Input buffer cleared!"
-          eval_string.replace("")
-        end
-      end
-
-      create_command "show-input", "Show the contents of the input buffer for the current multi-line expression." do
-        def process
-          output.puts Code.new(eval_string).with_line_numbers
-        end
-      end
-
-      create_command "edit" do
-        description "Invoke the default editor on a file."
-
-        banner <<-BANNER
-          Usage: edit [--no-reload|--reload] [--line LINE] [--temp|--ex|FILE[:LINE]|--in N]
-
-          Open a text editor. When no FILE is given, edits the pry input buffer.
-          Ensure Pry.config.editor is set to your editor of choice.
-
-          e.g: `edit sample.rb`
-          e.g: `edit sample.rb --line 105`
-          e.g: `edit --ex`
-
-          https://github.com/pry/pry/wiki/Editor-integration#wiki-Edit_command
-        BANNER
-
-        def options(opt)
-          opt.on :e, :ex, "Open the file that raised the most recent exception (_ex_.file)", :optional_argument => true, :as => Integer
-          opt.on :i, :in, "Open a temporary file containing the Nth input expression. N may be a range.", :optional_argument => true, :as => Range, :default => -1..-1
-          opt.on :t, :temp, "Open an empty temporary file"
-          opt.on :l, :line, "Jump to this line in the opened file", :argument => true, :as => Integer
-          opt.on :n, :"no-reload", "Don't automatically reload the edited code"
-          opt.on :c, :"current", "Open the current __FILE__ and at __LINE__ (as returned by `whereami`)."
-          opt.on :r, :reload, "Reload the edited code immediately (default for ruby files)"
-        end
-
-        def process
-          if [opts.present?(:ex), opts.present?(:temp), opts.present?(:in), !args.empty?].count(true) > 1
-            raise CommandError, "Only one of --ex, --temp, --in and FILE may be specified."
-          end
-
-          if !opts.present?(:ex) && !opts.present?(:current) && args.empty?
-            # edit of local code, eval'd within pry.
-            process_local_edit
-          else
-            # edit of remote code, eval'd at top-level
-            process_remote_edit
-          end
-        end
-
-        def process_i
-          case opts[:i]
-          when Range
-            (_pry_.input_array[opts[:i]] || []).join
-          when Fixnum
-            _pry_.input_array[opts[:i]] || ""
-          else
-            return output.puts "Not a valid range: #{opts[:i]}"
-          end
-        end
-
-        def process_local_edit
-          content = case
-            when opts.present?(:temp)
-              ""
-            when opts.present?(:in)
-              process_i
-            when eval_string.strip != ""
-              eval_string
-            else
-              _pry_.input_array.reverse_each.find{ |x| x && x.strip != "" } || ""
-          end
-
-          line = content.lines.count
-
-          temp_file do |f|
-            f.puts(content)
-            f.flush
-            reload = !opts.present?(:'no-reload') && !Pry.config.disable_auto_reload
-            f.close(false)
-            invoke_editor(f.path, line, reload)
-            if reload
-              silence_warnings do
-                eval_string.replace(File.read(f.path))
-              end
-            end
-          end
-        end
-
-        def process_remote_edit
-          if opts.present?(:ex)
-            if _pry_.last_exception.nil?
-              raise CommandError, "No exception found."
-            end
-
-            ex = _pry_.last_exception
-            bt_index = opts[:ex].to_i
-
-            ex_file, ex_line = ex.bt_source_location_for(bt_index)
-            if ex_file && RbxPath.is_core_path?(ex_file)
-              file_name = RbxPath.convert_path_to_full(ex_file)
-            else
-              file_name = ex_file
-            end
-
-            line = ex_line
-
-            if file_name.nil?
-              raise CommandError, "Exception has no associated file."
-            end
-
-            if Pry.eval_path == file_name
-              raise CommandError, "Cannot edit exceptions raised in REPL."
-            end
-          elsif opts.present?(:current)
-            file_name = target.eval("__FILE__")
-            line = target.eval("__LINE__")
-          else
-
-            # break up into file:line
-            file_name = File.expand_path(args.first)
-            line = file_name.sub!(/:(\d+)$/, "") ? $1.to_i : 1
-          end
-
-          if not_a_real_file?(file_name)
-            raise CommandError, "#{file_name} is not a valid file name, cannot edit!"
-          end
-
-          line = opts[:l].to_i if opts.present?(:line)
-
-          reload = opts.present?(:reload) || ((opts.present?(:ex) || file_name.end_with?(".rb")) && !opts.present?(:'no-reload')) && !Pry.config.disable_auto_reload
-
-          # Sanitize blanks.
-          sanitized_file_name = Shellwords.escape(file_name)
-
-          invoke_editor(sanitized_file_name, line, reload)
-          set_file_and_dir_locals(sanitized_file_name)
-
-          if reload
-            silence_warnings do
-              TOPLEVEL_BINDING.eval(File.read(file_name), file_name)
-            end
-          end
-        end
-      end
-
-      create_command "edit-method" do
-        description "Edit the source code for a method."
-
-        banner <<-BANNER
-          Usage: edit-method [OPTIONS] [METH]
-
-          Edit the method METH in an editor.
-          Ensure Pry.config.editor is set to your editor of choice.
-
-          e.g: `edit-method hello_method`
-          e.g: `edit-method Pry#rep`
-          e.g: `edit-method`
-
-          https://github.com/pry/pry/wiki/Editor-integration#wiki-Edit_method
-        BANNER
-
-        command_options :shellwords => false
-
-        def options(opt)
-          method_options(opt)
-          opt.on :n, "no-reload", "Do not automatically reload the method's file after editing."
-          opt.on "no-jump", "Do not fast forward editor to first line of method."
-          opt.on :p, :patch, "Instead of editing the method's file, try to edit in a tempfile and apply as a monkey patch."
-        end
-
-        def process
-          if !Pry.config.editor
-            raise CommandError, "No editor set!\nEnsure that #{text.bold("Pry.config.editor")} is set to your editor of choice."
-          end
-
-          begin
-            @method = method_object
-          rescue NonMethodContextError => err
-          end
-
-          if opts.present?(:patch) || (@method && @method.dynamically_defined?)
-            if err
-              raise err # can't patch a non-method
-            end
-
-            process_patch
-          else
-            if err && !File.exist?(target.eval('__FILE__'))
-              raise err # can't edit a non-file
-            end
-
-            process_file
-          end
-        end
-
-        def process_patch
-          lines = @method.source.lines.to_a
-
-          lines[0] = definition_line_for_owner(lines[0])
-
-          temp_file do |f|
-            f.puts lines.join
-            f.flush
-            f.close(false)
-            invoke_editor(f.path, 0, true)
-
-            if @method.alias?
-              with_method_transaction(original_name, @method.owner) do
-                Pry.new(:input => StringIO.new(File.read(f.path))).rep(@method.owner)
-                Pry.binding_for(@method.owner).eval("alias #{@method.name} #{original_name}")
-              end
-            else
-              Pry.new(:input => StringIO.new(File.read(f.path))).rep(@method.owner)
-            end
-          end
-        end
-
-        def process_file
-          file, line = extract_file_and_line
-
-          reload = !opts.present?(:'no-reload') && !Pry.config.disable_auto_reload
-          invoke_editor(file, opts["no-jump"] ? 0 : line, reload)
-          silence_warnings do
-            load file if reload
-          end
-        end
-
-        protected
-          def extract_file_and_line
-            if @method
-              if @method.source_type == :c
-                raise CommandError, "Can't edit a C method."
-              else
-                [@method.source_file, @method.source_line]
-              end
-            else
-              [target.eval('__FILE__'), target.eval('__LINE__')]
-            end
-          end
-
-          def with_method_transaction(meth_name, target=TOPLEVEL_BINDING)
-            target = Pry.binding_for(target)
-            temp_name = "__pry_#{meth_name}__"
-
-            target.eval("alias #{temp_name} #{meth_name}")
-            yield
-            target.eval("alias #{meth_name} #{temp_name}")
-          ensure
-            target.eval("undef #{temp_name}") rescue nil
-          end
-
-          # The original name of the method, if it's not present raise an error telling
-          # the user why we don't work.
-          #
-          def original_name
-            @method.original_name or raise CommandError, "Pry can only patch methods created with the `def` keyword."
-          end
-
-          # Update the definition line so that it can be eval'd directly on the Method's
-          # owner instead of from the original context.
-          #
-          # In particular this takes `def self.foo` and turns it into `def foo` so that we
-          # don't end up creating the method on the singleton class of the singleton class
-          # by accident.
-          #
-          # This is necessarily done by String manipulation because we can't find out what
-          # syntax is needed for the argument list by ruby-level introspection.
-          #
-          # @param String   The original definition line. e.g. def self.foo(bar, baz=1)
-          # @return String  The new definition line. e.g. def foo(bar, baz=1)
-          #
-          def definition_line_for_owner(line)
-            if line =~ /^def (?:.*?\.)?#{Regexp.escape(original_name)}(?=[\(\s;]|$)/
-              "def #{original_name}#{$'}"
-            else
-              raise CommandError, "Could not find original `def #{original_name}` line to patch."
-            end
-          end
-      end
-
-      create_command(/amend-line(?: (-?\d+)(?:\.\.(-?\d+))?)?/) do
-        description "Amend a line of input in multi-line mode."
-        command_options :interpolate => false, :listing => "amend-line"
-
-        banner <<-'BANNER'
-          Amend a line of input in multi-line mode. `amend-line N`, where the N in `amend-line N` represents line to replace.
-
-          Can also specify a range of lines using `amend-line N..M` syntax. Passing '!' as replacement content deletes the line(s) instead.
-          e.g amend-line 1 puts 'hello world! # replace line 1'
-          e.g amend-line 1..4 !               # delete lines 1..4
-          e.g amend-line 3 >puts 'goodbye'    # insert before line 3
-          e.g amend-line puts 'hello again'   # no line number modifies immediately preceding line
-        BANNER
-
-        def process
-          start_line_number, end_line_number, replacement_line = *args
-
-          if eval_string.empty?
-            raise CommandError, "No input to amend."
-          end
-
-          replacement_line = "" if !replacement_line
-          input_array = eval_string.each_line.to_a
-
-          end_line_number = start_line_number.to_i if !end_line_number
-          line_range = start_line_number ? (one_index_number(start_line_number.to_i)..one_index_number(end_line_number.to_i))  : input_array.size - 1
-
-          # delete selected lines if replacement line is '!'
-          if arg_string == "!"
-            input_array.slice!(line_range)
-          elsif arg_string.start_with?(">")
-            insert_slot = Array(line_range).first
-            input_array.insert(insert_slot, arg_string[1..-1] + "\n")
-          else
-            input_array[line_range] = arg_string + "\n"
-          end
-          eval_string.replace input_array.join
-          run "show-input"
-        end
-      end
-
-      create_command "play" do
-        include Helpers::DocumentationHelpers
-
-        description "Play back a string variable or a method or a file as input."
-
-        banner <<-BANNER
-          Usage: play [OPTIONS] [--help]
-
-          The play command enables you to replay code from files and methods as
-          if they were entered directly in the Pry REPL. Default action (no
-          options) is to play the provided string variable
-
-          e.g: `play -i 20 --lines 1..3`
-          e.g: `play -m Pry#repl --lines 1..-1`
-          e.g: `play -f Rakefile --lines 5`
-
-          https://github.com/pry/pry/wiki/User-Input#wiki-Play
-        BANNER
-
-        attr_accessor :content
-
-        def setup
-          self.content   = ""
-        end
-
-        def options(opt)
-          opt.on :m, :method, "Play a method's source.", :argument => true do |meth_name|
-            meth = get_method_or_raise(meth_name, target, {})
-            self.content << meth.source
-          end
-          opt.on :d, :doc, "Play a method's documentation.", :argument => true do |meth_name|
-            meth = get_method_or_raise(meth_name, target, {})
-            text.no_color do
-              self.content << process_comment_markup(meth.doc)
-            end
-          end
-          opt.on :c, :command, "Play a command's source.", :argument => true do |command_name|
-            command = find_command(command_name)
-            block = Pry::Method.new(command.block)
-            self.content << block.source
-          end
-          opt.on :f, :file, "Play a file.", :argument => true do |file|
-            self.content << File.read(File.expand_path(file))
-          end
-          opt.on :l, :lines, "Only play a subset of lines.", :optional_argument => true, :as => Range, :default => 1..-1
-          opt.on :i, :in, "Play entries from Pry's input expression history. Takes an index or range. Note this can only replay pure Ruby code, not Pry commands.", :optional_argument => true,
-          :as => Range, :default => -5..-1 do |range|
-            input_expressions = _pry_.input_array[range] || []
-            Array(input_expressions).each { |v| self.content << v }
-          end
-          opt.on :o, "open", 'When used with the -m switch, it plays the entire method except the last line, leaving the method definition "open". `amend-line` can then be used to modify the method.'
-        end
-
-        def process
-          perform_play
-          run "show-input" unless Pry::Code.complete_expression?(eval_string)
-        end
-
-        def process_non_opt
-          args.each do |arg|
-            begin
-              self.content << target.eval(arg)
-            rescue Pry::RescuableException
-              raise CommandError, "Problem when evaling #{arg}."
-            end
-          end
-        end
-
-        def perform_play
-          process_non_opt
-
-          if opts.present?(:lines)
-            self.content = restrict_to_lines(self.content, opts[:l])
-          end
-
-          if opts.present?(:open)
-            self.content = restrict_to_lines(self.content, 1..-2)
-          end
-
-          eval_string << self.content
-        end
-      end
-    end
-  end
-end