pry-rescue 0.9 → 0.9.1.martin

data/README.md

@@ -11,19 +11,6 @@ instead of `ruby`:
 rescue <script.rb> [arguments..]
 ```
 
-If you're using Rails, you should add `pry-rescue` to the development section of your
-Gemspec and then run rails server using rescue:
-
-```
-rescue rails server
-```
-
-If you're using `bundle exec` the rescue should go after the exec:
-
-```
-bundle exec rescue rails server
-```
-
 If you're using Rack, you should use the middleware instead (though be careful to only
 include it in development!)
 ```
@@ -62,19 +49,6 @@ from examples/example.rb:7:in `rescue in test'
 [1] pry(main)>
 ```
 
-Finally. If you're doing your own exception handling, you can ask pry to open on an exception that you've caught.
-For this to work you must be inside a Pry::rescue{ } block.
-
-```ruby
-def test
-  raise "foo"
-rescue => e
-  Pry::rescued(e)
-end
-
-Pry::rescue{ test }
-```
-
 cd-cause
 ========
 
@@ -119,24 +93,51 @@ From: examples/example.rb @ line 4 Object#test:
 foo
 ```
 
+Pry::rescued
+============
+
+If your exception handling needs are truly complicated then you can pass explicitly
+rescued exceptions into Pry::rescue:
+
+```ruby
+def test
+  raise "foo"
+end
+
+def safely_test
+  test
+rescue => e
+  Pry::rescued e
+end
+
+Pry::rescue do
+  safely_test
+end
+```
+
+This lets you open a Pry session as part of your normal exception handling. N.B.
+`Pry::rescued` must always be called from somewhere within a `Pry::rescue`, and the
+exception object you pass to it must have actually been raised!
+
 pry-stack explorer
 ==================
 
 If you're running rubinius, or ruby-1.9, then you can use `pry-rescue` alongside
-`pry-stack\_explorer`. This gives you the ability to move `up` or `down` the stack so that
+`pry-stack_explorer`. This gives you the ability to move `up` or `down` the stack so that
 you can get a better idea of why your function ended up in a bad state. Run
 [example2.rb](https://github.com/ConradIrwin/pry-rescue/blob/master/examples/example2.rb) to get a feel for what this is like.
 
-Known bugs
-==========
-
-* ruby 2.0, 1.9.3, 1.9.2 – no known bugs
-* ruby 1.9.1 — not supported
-* ruby 1.8.7 — occasional incorrect values for self
-* ree 1.8.7 — no known bugs
-* jruby 1.7 (1.8 mode and 1.9 mode) — no known bugs
-* jruby 1.6 (1.8 mode and 1.9 mode) — incorrect value for self in NoMethodErrors
-* rbx (1.8 mode and 1.9 mode) – does not catch some low-level errors (e.g. ZeroDivisionError)
+Compatibility
+=============
+
+* mri 2.0
+* mri 1.9.3
+* mri 1.9.2
+* mri 1.8.7 — occasionally the value for `self` will be incorrect.
+* ree 1.8.7 — occasionally the value for `self` will be incorrect.
+* jruby-head (--1.8, --1.9)
+* jruby 1.6 (--1.8, --1.9) — the value for `self` is incorrect in `NoMethodError`s.
+* rubinius (-Xversion=18, -Xversion=19) — some low-level exceptions are missed (e.g. ZeroDivisionError when doing `1 / 0`)
 
 Meta-fu
 =======

data/bin/rescue

@@ -17,11 +17,6 @@ What it does:
 
 }
 
-if ARGV[0] == 'rails'
-  ENV['PRY_RESCUE_RAILS'] = 'true'
-  exec(*ARGV)
-end
-
 if script = ARGV.shift
   $0 = File.expand_path(script)
   if File.exists? script

data/lib/pry-rescue.rb

@@ -6,10 +6,6 @@ require File.expand_path('../pry-rescue/core_ext', __FILE__)
 require File.expand_path('../pry-rescue/commands', __FILE__)
 require File.expand_path('../pry-rescue/rack', __FILE__)
 
-if ENV['PRY_RESCUE_RAILS']
-  require File.expand_path('../pry-rescue/rails', __FILE__)
-end
-
 begin
   require 'pry-stack_explorer'
 rescue LoadError
@@ -93,9 +89,7 @@ class PryRescue
     # @param [String] file  the absolute path
     # @return [Boolean]
     def user_path?(file)
-      !file.start_with?(RbConfig::CONFIG['libdir']) &&
-      !Gem::Specification.any?{ |gem| file.start_with?(gem.full_gem_path) } &&
-      !(file == '<internal:prelude>')
+      !file.start_with?(RbConfig::CONFIG['libdir'])
     end
 
     # Remove bindings that are part of Interception/Pry.rescue's internal

data/pry-rescue.gemspec

@@ -1,6 +1,6 @@
 Gem::Specification.new do |s|
   s.name          = 'pry-rescue'
-  s.version       = '0.9'
+  s.version       = '0.9.1.martin'
   s.summary       = 'Open a pry session on any unhandled exceptions'
   s.description   = 'Allows you to wrap code in Pry::rescue{ } to open a pry session at any unhandled exceptions'
   s.homepage      = 'https://github.com/ConradIrwin/pry-rescue'

metadata

@@ -1,96 +1,109 @@
---- !ruby/object:Gem::Specification 
+--- !ruby/object:Gem::Specification
 name: pry-rescue
-version: !ruby/object:Gem::Version 
-  prerelease: false
-  segments: 
-  - 0
-  - 9
-  version: "0.9"
+version: !ruby/object:Gem::Version
+  version: 0.9.1.martin
+  prerelease: 6
 platform: ruby
-authors: 
+authors:
 - Conrad Irwin
 - banisterfiend
 - epitron
 autorequire: 
 bindir: bin
 cert_chain: []
-
-date: 2012-09-30 00:00:00 -07:00
-default_executable: 
-dependencies: 
-- !ruby/object:Gem::Dependency 
+date: 2012-10-03 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
   name: pry
-  prerelease: false
-  requirement: &id001 !ruby/object:Gem::Requirement 
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :runtime
-  version_requirements: *id001
-- !ruby/object:Gem::Dependency 
-  name: interception
   prerelease: false
-  requirement: &id002 !ruby/object:Gem::Requirement 
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        - 3
-        version: "0.3"
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: interception
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0.3'
   type: :runtime
-  version_requirements: *id002
-- !ruby/object:Gem::Dependency 
-  name: rspec
   prerelease: false
-  requirement: &id003 !ruby/object:Gem::Requirement 
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0.3'
+- !ruby/object:Gem::Dependency
+  name: rspec
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :development
-  version_requirements: *id003
-- !ruby/object:Gem::Dependency 
-  name: yard
   prerelease: false
-  requirement: &id004 !ruby/object:Gem::Requirement 
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: yard
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :development
-  version_requirements: *id004
-- !ruby/object:Gem::Dependency 
-  name: redcarpet
   prerelease: false
-  requirement: &id005 !ruby/object:Gem::Requirement 
-    requirements: 
-    - - ">="
-      - !ruby/object:Gem::Version 
-        segments: 
-        - 0
-        version: "0"
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: redcarpet
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
   type: :development
-  version_requirements: *id005
-description: Allows you to wrap code in Pry::rescue{ } to open a pry session at any unhandled exceptions
-email: 
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+description: Allows you to wrap code in Pry::rescue{ } to open a pry session at any
+  unhandled exceptions
+email:
 - conrad.irwin@gmail.com
 - jrmair@gmail.com
 - chris@ill-logic.com
-executables: 
+executables:
 - rescue
 extensions: []
-
 extra_rdoc_files: []
-
-files: 
+files:
 - .gitignore
 - Gemfile
 - LICENSE.MIT
@@ -105,7 +118,6 @@ files:
 - lib/pry-rescue/commands.rb
 - lib/pry-rescue/core_ext.rb
 - lib/pry-rescue/rack.rb
-- lib/pry-rescue/rails.rb
 - lib/pry/rescue.rb
 - pry-rescue.gemspec
 - spec/commands_spec.rb
@@ -118,35 +130,28 @@ files:
 - spec/fixtures/super.rb
 - spec/fixtures/uri.rb
 - spec/pry_rescue_spec.rb
-has_rdoc: true
 homepage: https://github.com/ConradIrwin/pry-rescue
 licenses: []
-
 post_install_message: 
 rdoc_options: []
-
-require_paths: 
+require_paths:
 - lib
-required_ruby_version: !ruby/object:Gem::Requirement 
-  requirements: 
-  - - ">="
-    - !ruby/object:Gem::Version 
-      segments: 
-      - 0
-      version: "0"
-required_rubygems_version: !ruby/object:Gem::Requirement 
-  requirements: 
-  - - ">="
-    - !ruby/object:Gem::Version 
-      segments: 
-      - 0
-      version: "0"
+required_ruby_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>'
+    - !ruby/object:Gem::Version
+      version: 1.3.1
 requirements: []
-
 rubyforge_project: 
-rubygems_version: 1.3.6
+rubygems_version: 1.8.23
 signing_key: 
 specification_version: 3
 summary: Open a pry session on any unhandled exceptions
 test_files: []
-

data/lib/pry-rescue/rails.rb

@@ -1,8 +0,0 @@
-require 'pry-rescue'
-class PryRescue
-  class Railtie < ::Rails::Railtie
-    initializer "pry_rescue" do |app|
-      app.config.middleware.use PryRescue::Rack
-    end
-  end
-end