pry-byebug-power_assert 0.1.0

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: 341653a3fa1a5c3e73b27fa8552ec3c124c84467
+  data.tar.gz: 325315895d330bb3a56a04d7d8e24f1753bd88c7
+SHA512:
+  metadata.gz: 48e6bed66d3c0ed220ae5371d8370278a8de00bafb7e8e9e31d5b707c3788f55ea7e1e519ac415daa9bc3e3dae67dfbecdb9cae2437e06786c21b309629f50ae
+  data.tar.gz: 7fe0c778091c4fcb4dea0dcd4873deb0ca77a2e2bf1a9660c3a898d5ffbecb0aee68682d8b91b6f462d9c040dd1355aacf60d70ebae28b642ecf7624d90cbce9

data/.gitignore

@@ -0,0 +1,11 @@
+/.bundle/
+/Gemfile.local
+/Gemfile.lock
+/GPATH
+/GRTAGS
+/GTAGS
+/coverage/
+/doc/
+/pkg/
+/tmp/
+/vendor/

data/.travis.yml

@@ -0,0 +1,11 @@
+sudo: false
+language: ruby
+rvm:
+  - 2.3.3
+  - 2.4.0
+  - ruby-head
+matrix:
+  allow_failures:
+    - rvm: ruby-head
+before_install:
+ - gem update bundler

data/BSDL

@@ -0,0 +1,22 @@
+Copyright (C) 2017 Kazuki Tsujimoto, All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.

data/COPYING

@@ -0,0 +1,57 @@
+Copyright (C) 2017 Kazuki Tsujimoto, All rights reserved.
+
+You can redistribute it and/or modify it under either the terms of the
+2-clause BSDL (see the file BSDL), or the conditions below:
+
+  1. You may make and give away verbatim copies of the source form of the
+     software without restriction, provided that you duplicate all of the
+     original copyright notices and associated disclaimers.
+
+  2. You may modify your copy of the software in any way, provided that
+     you do at least ONE of the following:
+
+       a) place your modifications in the Public Domain or otherwise
+          make them Freely Available, such as by posting said
+	  modifications to Usenet or an equivalent medium, or by allowing
+	  the author to include your modifications in the software.
+
+       b) use the modified software only within your corporation or
+          organization.
+
+       c) give non-standard binaries non-standard names, with
+          instructions on where to get the original software distribution.
+
+       d) make other distribution arrangements with the author.
+
+  3. You may distribute the software in object code or binary form,
+     provided that you do at least ONE of the following:
+
+       a) distribute the binaries and library files of the software,
+	  together with instructions (in the manual page or equivalent)
+	  on where to get the original distribution.
+
+       b) accompany the distribution with the machine-readable source of
+	  the software.
+
+       c) give non-standard binaries non-standard names, with
+          instructions on where to get the original software distribution.
+
+       d) make other distribution arrangements with the author.
+
+  4. You may modify and include the part of the software into any other
+     software (possibly commercial).  But some files in the distribution
+     are not written by the author, so that they are not under these terms.
+
+     For the list of those files and their copying conditions, see the
+     file LEGAL.
+
+  5. The scripts and library files supplied as input to or produced as
+     output from the software do not automatically fall under the
+     copyright of the software, but belong to whomever generated them,
+     and may be sold commercially, and may be aggregated with this
+     software.
+
+  6. THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
+     IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+     PURPOSE.

data/Gemfile

@@ -0,0 +1,9 @@
+source 'https://rubygems.org'
+
+gemspec
+
+# https://github.com/redmine/redmine/blob/3.0.4/Gemfile#L101
+local_gemfile = File.join(File.dirname(__FILE__), "Gemfile.local")
+if File.exist?(local_gemfile)
+  eval_gemfile local_gemfile
+end

data/LEGAL

@@ -0,0 +1,4 @@
+LEGAL NOTICE INFORMATION
+------------------------
+
+All the files in this distribution are written by the author.

data/README.md

@@ -0,0 +1,33 @@
+# Pry::Byebug::PowerAssert
+
+[![Build Status](https://secure.travis-ci.org/k-tsj/power_assert.png?branch=master)](http://travis-ci.org/k-tsj/pry-byebug-power_assert)
+
+## About
+pry-byebug-power_assert shows Power Assert style inspection message when you run 'next' command of pry-byebug.
+
+![Screenshot](https://raw.githubusercontent.com/wiki/k-tsj/pry-byebug-power_assert/images/screenshot.png)
+
+## Installation
+
+Add this line to your application's Gemfile:
+
+```ruby
+gem 'pry-byebug-power_assert'
+```
+
+And then execute:
+
+    $ bundle
+
+Or install it yourself as:
+
+    $ gem install pry-byebug-power_assert
+
+## Usage
+
+Just type `next` in pry-byebug session.
+
+## Contributing
+
+Bug reports and pull requests are welcome on GitHub at https://github.com/k-tsj/pry-byebug-power_assert.
+

data/Rakefile

@@ -0,0 +1,10 @@
+require "bundler/gem_tasks"
+require "rake/testtask"
+
+Rake::TestTask.new(:test) do |t|
+  t.ruby_opts = ["-w", "-r./test/test_helper"]
+  t.libs << "lib"
+  t.test_files = FileList['test/**/*_test.rb']
+end
+
+task :default => :test

data/bin/console

@@ -0,0 +1,14 @@
+#!/usr/bin/env ruby
+
+require "bundler/setup"
+require "pry/byebug/power_assert"
+
+# You can add fixtures and/or initialization code here to make experimenting
+# with your gem easier. You can also use a different console, if you like.
+
+# (If you use this, don't forget to add pry to your Gemfile!)
+# require "pry"
+# Pry.start
+
+require "irb"
+IRB.start

data/bin/setup

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+set -euo pipefail
+IFS=$'\n\t'
+set -vx
+
+bundle install
+
+# Do any other automated setup that you need to do here

data/lib/pry/byebug/power_assert/core_ext.rb

@@ -0,0 +1,45 @@
+require 'pry/byebug/power_assert/version'
+require 'pry-byebug'
+require 'power_assert'
+
+begin
+  verbose, $VERBOSE = $VERBOSE, nil
+  require 'power_assert/colorize'
+ensure
+  $VERBOSE = verbose
+end
+
+module PowerAssert
+  IGNORED_LIB_DIRS[Pry::Byebug::PowerAssert] = __dir__
+end
+
+module Byebug
+  class PryProcessor
+    prepend Module.new {
+      def initialize(*)
+        super
+        @prev_power_assert_context = nil
+      end
+
+      def perform_next(*)
+        @prev_power_assert_context = PowerAssert.trace(frame)
+        super
+      end
+
+      def resume_pry
+        if @prev_power_assert_context
+          begin
+            sep = Pry::Helpers::Text.green('-' * (Pry::Terminal.width! - 1))
+            output.puts sep
+            output.puts @prev_power_assert_context.message
+            output.puts sep
+          ensure
+            @prev_power_assert_context.disable
+            @prev_power_assert_context = nil
+          end
+        end
+        super
+      end
+    }
+  end
+end

data/lib/pry/byebug/power_assert/version.rb

@@ -0,0 +1,7 @@
+class Pry
+  module Byebug
+    module PowerAssert
+      VERSION = "0.1.0"
+    end
+  end
+end

data/lib/pry/byebug/power_assert.rb

@@ -0,0 +1,6 @@
+# pry/byebug/power_assert.rb
+#
+# Copyright (C) 2017 Kazuki Tsujimoto, All rights reserved.
+
+require "pry/byebug/power_assert/version"
+require "pry/byebug/power_assert/core_ext"

data/lib/pry-byebug-power_assert.rb

@@ -0,0 +1 @@
+require "pry/byebug/power_assert"

data/pry-byebug-power_assert.gemspec

@@ -0,0 +1,31 @@
+# coding: utf-8
+lib = File.expand_path('../lib', __FILE__)
+$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
+require 'pry/byebug/power_assert/version'
+
+Gem::Specification.new do |spec|
+  spec.name          = "pry-byebug-power_assert"
+  spec.version       = Pry::Byebug::PowerAssert::VERSION
+  spec.authors       = ["Kazuki Tsujimoto"]
+  spec.email         = ["kazuki@callcc.net"]
+
+  spec.summary       = %q{Extend pry-byebug with power_assert}
+  spec.description   = %q{pry-byebug-power_assert shows Power Assert style inspection message when you run 'next' command of pry-byebug.}
+  spec.homepage      = "https://github.com/k-tsj/pry-byebug-power_assert"
+
+  spec.files         = `git ls-files -z`.split("\x0").reject do |f|
+    f.match(%r{^(test|spec|features)/})
+  end
+  spec.bindir        = "exe"
+  spec.executables   = spec.files.grep(%r{^exe/}) { |f| File.basename(f) }
+  spec.require_paths = ["lib"]
+
+  spec.add_development_dependency "bundler"
+  spec.add_development_dependency "rake"
+  spec.add_development_dependency "test-unit"
+  spec.add_development_dependency "pry-byebug"
+   spec.add_development_dependency "power_assert", ">= 1.0.0"
+  spec.extra_rdoc_files = ['README.md']
+  spec.rdoc_options     = ['--main', 'README.md']
+  spec.licenses         = ['2-clause BSDL', "Ruby's"]
+end

metadata

@@ -0,0 +1,134 @@
+--- !ruby/object:Gem::Specification
+name: pry-byebug-power_assert
+version: !ruby/object:Gem::Version
+  version: 0.1.0
+platform: ruby
+authors:
+- Kazuki Tsujimoto
+autorequire: 
+bindir: exe
+cert_chain: []
+date: 2017-01-28 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: bundler
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: rake
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: test-unit
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: pry-byebug
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: power_assert
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: 1.0.0
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: 1.0.0
+description: pry-byebug-power_assert shows Power Assert style inspection message when
+  you run 'next' command of pry-byebug.
+email:
+- kazuki@callcc.net
+executables: []
+extensions: []
+extra_rdoc_files:
+- README.md
+files:
+- ".gitignore"
+- ".travis.yml"
+- BSDL
+- COPYING
+- Gemfile
+- LEGAL
+- README.md
+- Rakefile
+- bin/console
+- bin/setup
+- lib/pry-byebug-power_assert.rb
+- lib/pry/byebug/power_assert.rb
+- lib/pry/byebug/power_assert/core_ext.rb
+- lib/pry/byebug/power_assert/version.rb
+- pry-byebug-power_assert.gemspec
+homepage: https://github.com/k-tsj/pry-byebug-power_assert
+licenses:
+- 2-clause BSDL
+- Ruby's
+metadata: {}
+post_install_message: 
+rdoc_options:
+- "--main"
+- README.md
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 2.6.8
+signing_key: 
+specification_version: 4
+summary: Extend pry-byebug with power_assert
+test_files: []