privy_ruby 0.2.0 → 0.3.0

data/rbi/privy/models/wallet_action_swap_rejected_webhook_payload.rbi

@@ -12,21 +12,25 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
       # Chain identifier.
       sig { returns(String) }
       attr_accessor :caip2
 
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
       # A description of why a wallet action (or a step within a wallet action) failed.
-      sig { returns(Privy::FailureReason) }
+      sig { returns(Privy::Wallets::FailureReason) }
       attr_reader :failure_reason
 
-      sig { params(failure_reason: Privy::FailureReason::OrHash).void }
+      sig { params(failure_reason: Privy::Wallets::FailureReason::OrHash).void }
       attr_writer :failure_reason
 
-      # Amount of input token in base units. Populated after on-chain confirmation.
+      # Amount of input token in base units. Populated after onchain confirmation.
       sig { returns(T.nilable(String)) }
       attr_accessor :input_amount
 
@@ -38,6 +42,10 @@ module Privy
       sig { returns(String) }
       attr_accessor :output_token
 
+      # ISO 8601 timestamp of when the wallet action was rejected.
+      sig { returns(String) }
+      attr_accessor :rejected_at
+
       # The status of the wallet action.
       sig do
         returns(
@@ -47,7 +55,7 @@ module Privy
       attr_accessor :status
 
       # The steps of the wallet action at the time of rejection.
-      sig { returns(T::Array[Privy::WalletActionStep::Variants]) }
+      sig { returns(T::Array[Privy::Wallets::WalletActionStep::Variants]) }
       attr_accessor :steps
 
       # The type of webhook event.
@@ -69,21 +77,25 @@ module Privy
       # Payload for the wallet_action.swap.rejected webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
           caip2: String,
-          failure_reason: Privy::FailureReason::OrHash,
+          created_at: String,
+          failure_reason: Privy::Wallets::FailureReason::OrHash,
           input_amount: T.nilable(String),
           input_token: String,
           output_token: String,
+          rejected_at: String,
           status:
             Privy::WalletActionSwapRejectedWebhookPayload::Status::OrSymbol,
           steps:
             T::Array[
               T.any(
-                Privy::EvmTransactionWalletActionStep::OrHash,
-                Privy::EvmUserOperationWalletActionStep::OrHash,
-                Privy::SvmTransactionWalletActionStep::OrHash,
-                Privy::ExternalTransactionWalletActionStep::OrHash
+                Privy::Wallets::EvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::EvmUserOperationWalletActionStep::OrHash,
+                Privy::Wallets::SvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::TvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::ExternalTransactionWalletActionStep::OrHash,
+                Privy::Wallets::CustodianTransactionWalletActionStep::OrHash
               )
             ],
           type: Privy::WalletActionSwapRejectedWebhookPayload::Type::OrSymbol,
@@ -96,14 +108,18 @@ module Privy
         action_type:,
         # Chain identifier.
         caip2:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
         # A description of why a wallet action (or a step within a wallet action) failed.
         failure_reason:,
-        # Amount of input token in base units. Populated after on-chain confirmation.
+        # Amount of input token in base units. Populated after onchain confirmation.
         input_amount:,
         # Token address being sold.
         input_token:,
         # Token address being bought.
         output_token:,
+        # ISO 8601 timestamp of when the wallet action was rejected.
+        rejected_at:,
         # The status of the wallet action.
         status:,
         # The steps of the wallet action at the time of rejection.
@@ -120,15 +136,17 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
             caip2: String,
-            failure_reason: Privy::FailureReason,
+            created_at: String,
+            failure_reason: Privy::Wallets::FailureReason,
             input_amount: T.nilable(String),
             input_token: String,
             output_token: String,
+            rejected_at: String,
             status:
               Privy::WalletActionSwapRejectedWebhookPayload::Status::TaggedSymbol,
-            steps: T::Array[Privy::WalletActionStep::Variants],
+            steps: T::Array[Privy::Wallets::WalletActionStep::Variants],
             type:
               Privy::WalletActionSwapRejectedWebhookPayload::Type::TaggedSymbol,
             wallet_action_id: String,

data/rbi/privy/models/wallet_action_swap_succeeded_webhook_payload.rbi

@@ -12,14 +12,22 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
       # Chain identifier.
       sig { returns(String) }
       attr_accessor :caip2
 
-      # Amount of input token in base units. Populated after on-chain confirmation.
+      # ISO 8601 timestamp of when the wallet action completed successfully.
+      sig { returns(String) }
+      attr_accessor :completed_at
+
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
+      # Amount of input token in base units. Populated after onchain confirmation.
       sig { returns(T.nilable(String)) }
       attr_accessor :input_amount
 
@@ -27,7 +35,7 @@ module Privy
       sig { returns(String) }
       attr_accessor :input_token
 
-      # Amount of output token received, in base units. Populated after on-chain
+      # Amount of output token received, in base units. Populated after onchain
       # confirmation.
       sig { returns(T.nilable(String)) }
       attr_accessor :output_amount
@@ -45,7 +53,7 @@ module Privy
       attr_accessor :status
 
       # The steps of the wallet action, including transaction hashes.
-      sig { returns(T::Array[Privy::WalletActionStep::Variants]) }
+      sig { returns(T::Array[Privy::Wallets::WalletActionStep::Variants]) }
       attr_accessor :steps
 
       # The type of webhook event.
@@ -67,8 +75,10 @@ module Privy
       # Payload for the wallet_action.swap.succeeded webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
           caip2: String,
+          completed_at: String,
+          created_at: String,
           input_amount: T.nilable(String),
           input_token: String,
           output_amount: T.nilable(String),
@@ -78,10 +88,12 @@ module Privy
           steps:
             T::Array[
               T.any(
-                Privy::EvmTransactionWalletActionStep::OrHash,
-                Privy::EvmUserOperationWalletActionStep::OrHash,
-                Privy::SvmTransactionWalletActionStep::OrHash,
-                Privy::ExternalTransactionWalletActionStep::OrHash
+                Privy::Wallets::EvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::EvmUserOperationWalletActionStep::OrHash,
+                Privy::Wallets::SvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::TvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::ExternalTransactionWalletActionStep::OrHash,
+                Privy::Wallets::CustodianTransactionWalletActionStep::OrHash
               )
             ],
           type: Privy::WalletActionSwapSucceededWebhookPayload::Type::OrSymbol,
@@ -94,11 +106,15 @@ module Privy
         action_type:,
         # Chain identifier.
         caip2:,
-        # Amount of input token in base units. Populated after on-chain confirmation.
+        # ISO 8601 timestamp of when the wallet action completed successfully.
+        completed_at:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
+        # Amount of input token in base units. Populated after onchain confirmation.
         input_amount:,
         # Token address being sold.
         input_token:,
-        # Amount of output token received, in base units. Populated after on-chain
+        # Amount of output token received, in base units. Populated after onchain
         # confirmation.
         output_amount:,
         # Token address being bought.
@@ -119,15 +135,17 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
             caip2: String,
+            completed_at: String,
+            created_at: String,
             input_amount: T.nilable(String),
             input_token: String,
             output_amount: T.nilable(String),
             output_token: String,
             status:
               Privy::WalletActionSwapSucceededWebhookPayload::Status::TaggedSymbol,
-            steps: T::Array[Privy::WalletActionStep::Variants],
+            steps: T::Array[Privy::Wallets::WalletActionStep::Variants],
             type:
               Privy::WalletActionSwapSucceededWebhookPayload::Type::TaggedSymbol,
             wallet_action_id: String,

data/rbi/privy/models/wallet_action_transfer_created_webhook_payload.rbi

@@ -12,9 +12,13 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
       # Recipient address.
       sig { returns(String) }
       attr_accessor :destination_address
@@ -72,7 +76,7 @@ module Privy
       attr_writer :source_asset_address
 
       # Number of decimals for the transferred token. Present when the transfer was
-      # initiated with `asset_address` and the decimals were resolved on-chain.
+      # initiated with `asset_address` and the decimals were resolved onchain.
       sig { returns(T.nilable(Integer)) }
       attr_reader :source_asset_decimals
 
@@ -82,7 +86,8 @@ module Privy
       # Payload for the wallet_action.transfer.created webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
+          created_at: String,
           destination_address: String,
           source_chain: String,
           status:
@@ -100,6 +105,8 @@ module Privy
       def self.new(
         # Type of wallet action
         action_type:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
         # Recipient address.
         destination_address:,
         # Chain name (e.g. "base", "ethereum").
@@ -122,7 +129,7 @@ module Privy
         # was initiated with `asset_address`.
         source_asset_address: nil,
         # Number of decimals for the transferred token. Present when the transfer was
-        # initiated with `asset_address` and the decimals were resolved on-chain.
+        # initiated with `asset_address` and the decimals were resolved onchain.
         source_asset_decimals: nil
       )
       end
@@ -130,7 +137,8 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
+            created_at: String,
             destination_address: String,
             source_chain: String,
             status:

data/rbi/privy/models/wallet_action_transfer_failed_webhook_payload.rbi

@@ -12,18 +12,26 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
       # Recipient address.
       sig { returns(String) }
       attr_accessor :destination_address
 
+      # ISO 8601 timestamp of when the wallet action failed.
+      sig { returns(String) }
+      attr_accessor :failed_at
+
       # A description of why a wallet action (or a step within a wallet action) failed.
-      sig { returns(Privy::FailureReason) }
+      sig { returns(Privy::Wallets::FailureReason) }
       attr_reader :failure_reason
 
-      sig { params(failure_reason: Privy::FailureReason::OrHash).void }
+      sig { params(failure_reason: Privy::Wallets::FailureReason::OrHash).void }
       attr_writer :failure_reason
 
       # Chain name (e.g. "base", "ethereum").
@@ -40,7 +48,7 @@ module Privy
 
       # The steps of the wallet action. Completed steps will have transaction hashes;
       # the failing step will have a failure_reason.
-      sig { returns(T::Array[Privy::WalletActionStep::Variants]) }
+      sig { returns(T::Array[Privy::Wallets::WalletActionStep::Variants]) }
       attr_accessor :steps
 
       # The type of webhook event.
@@ -84,7 +92,7 @@ module Privy
       attr_writer :source_asset_address
 
       # Number of decimals for the transferred token. Present when the transfer was
-      # initiated with `asset_address` and the decimals were resolved on-chain.
+      # initiated with `asset_address` and the decimals were resolved onchain.
       sig { returns(T.nilable(Integer)) }
       attr_reader :source_asset_decimals
 
@@ -94,19 +102,23 @@ module Privy
       # Payload for the wallet_action.transfer.failed webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
+          created_at: String,
           destination_address: String,
-          failure_reason: Privy::FailureReason::OrHash,
+          failed_at: String,
+          failure_reason: Privy::Wallets::FailureReason::OrHash,
           source_chain: String,
           status:
             Privy::WalletActionTransferFailedWebhookPayload::Status::OrSymbol,
           steps:
             T::Array[
               T.any(
-                Privy::EvmTransactionWalletActionStep::OrHash,
-                Privy::EvmUserOperationWalletActionStep::OrHash,
-                Privy::SvmTransactionWalletActionStep::OrHash,
-                Privy::ExternalTransactionWalletActionStep::OrHash
+                Privy::Wallets::EvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::EvmUserOperationWalletActionStep::OrHash,
+                Privy::Wallets::SvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::TvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::ExternalTransactionWalletActionStep::OrHash,
+                Privy::Wallets::CustodianTransactionWalletActionStep::OrHash
               )
             ],
           type: Privy::WalletActionTransferFailedWebhookPayload::Type::OrSymbol,
@@ -121,8 +133,12 @@ module Privy
       def self.new(
         # Type of wallet action
         action_type:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
         # Recipient address.
         destination_address:,
+        # ISO 8601 timestamp of when the wallet action failed.
+        failed_at:,
         # A description of why a wallet action (or a step within a wallet action) failed.
         failure_reason:,
         # Chain name (e.g. "base", "ethereum").
@@ -148,7 +164,7 @@ module Privy
         # was initiated with `asset_address`.
         source_asset_address: nil,
         # Number of decimals for the transferred token. Present when the transfer was
-        # initiated with `asset_address` and the decimals were resolved on-chain.
+        # initiated with `asset_address` and the decimals were resolved onchain.
         source_asset_decimals: nil
       )
       end
@@ -156,13 +172,15 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
+            created_at: String,
             destination_address: String,
-            failure_reason: Privy::FailureReason,
+            failed_at: String,
+            failure_reason: Privy::Wallets::FailureReason,
             source_chain: String,
             status:
               Privy::WalletActionTransferFailedWebhookPayload::Status::TaggedSymbol,
-            steps: T::Array[Privy::WalletActionStep::Variants],
+            steps: T::Array[Privy::Wallets::WalletActionStep::Variants],
             type:
               Privy::WalletActionTransferFailedWebhookPayload::Type::TaggedSymbol,
             wallet_action_id: String,

data/rbi/privy/models/wallet_action_transfer_rejected_webhook_payload.rbi

@@ -12,20 +12,28 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
       # Recipient address.
       sig { returns(String) }
       attr_accessor :destination_address
 
       # A description of why a wallet action (or a step within a wallet action) failed.
-      sig { returns(Privy::FailureReason) }
+      sig { returns(Privy::Wallets::FailureReason) }
       attr_reader :failure_reason
 
-      sig { params(failure_reason: Privy::FailureReason::OrHash).void }
+      sig { params(failure_reason: Privy::Wallets::FailureReason::OrHash).void }
       attr_writer :failure_reason
 
+      # ISO 8601 timestamp of when the wallet action was rejected.
+      sig { returns(String) }
+      attr_accessor :rejected_at
+
       # Chain name (e.g. "base", "ethereum").
       sig { returns(String) }
       attr_accessor :source_chain
@@ -39,7 +47,7 @@ module Privy
       attr_accessor :status
 
       # The steps of the wallet action at the time of rejection.
-      sig { returns(T::Array[Privy::WalletActionStep::Variants]) }
+      sig { returns(T::Array[Privy::Wallets::WalletActionStep::Variants]) }
       attr_accessor :steps
 
       # The type of webhook event.
@@ -83,7 +91,7 @@ module Privy
       attr_writer :source_asset_address
 
       # Number of decimals for the transferred token. Present when the transfer was
-      # initiated with `asset_address` and the decimals were resolved on-chain.
+      # initiated with `asset_address` and the decimals were resolved onchain.
       sig { returns(T.nilable(Integer)) }
       attr_reader :source_asset_decimals
 
@@ -93,19 +101,23 @@ module Privy
       # Payload for the wallet_action.transfer.rejected webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
+          created_at: String,
           destination_address: String,
-          failure_reason: Privy::FailureReason::OrHash,
+          failure_reason: Privy::Wallets::FailureReason::OrHash,
+          rejected_at: String,
           source_chain: String,
           status:
             Privy::WalletActionTransferRejectedWebhookPayload::Status::OrSymbol,
           steps:
             T::Array[
               T.any(
-                Privy::EvmTransactionWalletActionStep::OrHash,
-                Privy::EvmUserOperationWalletActionStep::OrHash,
-                Privy::SvmTransactionWalletActionStep::OrHash,
-                Privy::ExternalTransactionWalletActionStep::OrHash
+                Privy::Wallets::EvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::EvmUserOperationWalletActionStep::OrHash,
+                Privy::Wallets::SvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::TvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::ExternalTransactionWalletActionStep::OrHash,
+                Privy::Wallets::CustodianTransactionWalletActionStep::OrHash
               )
             ],
           type:
@@ -121,10 +133,14 @@ module Privy
       def self.new(
         # Type of wallet action
         action_type:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
         # Recipient address.
         destination_address:,
         # A description of why a wallet action (or a step within a wallet action) failed.
         failure_reason:,
+        # ISO 8601 timestamp of when the wallet action was rejected.
+        rejected_at:,
         # Chain name (e.g. "base", "ethereum").
         source_chain:,
         # The status of the wallet action.
@@ -147,7 +163,7 @@ module Privy
         # was initiated with `asset_address`.
         source_asset_address: nil,
         # Number of decimals for the transferred token. Present when the transfer was
-        # initiated with `asset_address` and the decimals were resolved on-chain.
+        # initiated with `asset_address` and the decimals were resolved onchain.
         source_asset_decimals: nil
       )
       end
@@ -155,13 +171,15 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
+            created_at: String,
             destination_address: String,
-            failure_reason: Privy::FailureReason,
+            failure_reason: Privy::Wallets::FailureReason,
+            rejected_at: String,
             source_chain: String,
             status:
               Privy::WalletActionTransferRejectedWebhookPayload::Status::TaggedSymbol,
-            steps: T::Array[Privy::WalletActionStep::Variants],
+            steps: T::Array[Privy::Wallets::WalletActionStep::Variants],
             type:
               Privy::WalletActionTransferRejectedWebhookPayload::Type::TaggedSymbol,
             wallet_action_id: String,

data/rbi/privy/models/wallet_action_transfer_succeeded_webhook_payload.rbi

@@ -12,9 +12,17 @@ module Privy
         end
 
       # Type of wallet action
-      sig { returns(Privy::WalletActionType::TaggedSymbol) }
+      sig { returns(Privy::Wallets::WalletActionType::TaggedSymbol) }
       attr_accessor :action_type
 
+      # ISO 8601 timestamp of when the wallet action completed successfully.
+      sig { returns(String) }
+      attr_accessor :completed_at
+
+      # ISO 8601 timestamp of when the wallet action was created.
+      sig { returns(String) }
+      attr_accessor :created_at
+
       # Recipient address.
       sig { returns(String) }
       attr_accessor :destination_address
@@ -32,7 +40,7 @@ module Privy
       attr_accessor :status
 
       # The steps of the wallet action, including transaction hashes.
-      sig { returns(T::Array[Privy::WalletActionStep::Variants]) }
+      sig { returns(T::Array[Privy::Wallets::WalletActionStep::Variants]) }
       attr_accessor :steps
 
       # The type of webhook event.
@@ -76,7 +84,7 @@ module Privy
       attr_writer :source_asset_address
 
       # Number of decimals for the transferred token. Present when the transfer was
-      # initiated with `asset_address` and the decimals were resolved on-chain.
+      # initiated with `asset_address` and the decimals were resolved onchain.
       sig { returns(T.nilable(Integer)) }
       attr_reader :source_asset_decimals
 
@@ -86,7 +94,9 @@ module Privy
       # Payload for the wallet_action.transfer.succeeded webhook event.
       sig do
         params(
-          action_type: Privy::WalletActionType::OrSymbol,
+          action_type: Privy::Wallets::WalletActionType::OrSymbol,
+          completed_at: String,
+          created_at: String,
           destination_address: String,
           source_chain: String,
           status:
@@ -94,10 +104,12 @@ module Privy
           steps:
             T::Array[
               T.any(
-                Privy::EvmTransactionWalletActionStep::OrHash,
-                Privy::EvmUserOperationWalletActionStep::OrHash,
-                Privy::SvmTransactionWalletActionStep::OrHash,
-                Privy::ExternalTransactionWalletActionStep::OrHash
+                Privy::Wallets::EvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::EvmUserOperationWalletActionStep::OrHash,
+                Privy::Wallets::SvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::TvmTransactionWalletActionStep::OrHash,
+                Privy::Wallets::ExternalTransactionWalletActionStep::OrHash,
+                Privy::Wallets::CustodianTransactionWalletActionStep::OrHash
               )
             ],
           type:
@@ -113,6 +125,10 @@ module Privy
       def self.new(
         # Type of wallet action
         action_type:,
+        # ISO 8601 timestamp of when the wallet action completed successfully.
+        completed_at:,
+        # ISO 8601 timestamp of when the wallet action was created.
+        created_at:,
         # Recipient address.
         destination_address:,
         # Chain name (e.g. "base", "ethereum").
@@ -137,7 +153,7 @@ module Privy
         # was initiated with `asset_address`.
         source_asset_address: nil,
         # Number of decimals for the transferred token. Present when the transfer was
-        # initiated with `asset_address` and the decimals were resolved on-chain.
+        # initiated with `asset_address` and the decimals were resolved onchain.
         source_asset_decimals: nil
       )
       end
@@ -145,12 +161,14 @@ module Privy
       sig do
         override.returns(
           {
-            action_type: Privy::WalletActionType::TaggedSymbol,
+            action_type: Privy::Wallets::WalletActionType::TaggedSymbol,
+            completed_at: String,
+            created_at: String,
             destination_address: String,
             source_chain: String,
             status:
               Privy::WalletActionTransferSucceededWebhookPayload::Status::TaggedSymbol,
-            steps: T::Array[Privy::WalletActionStep::Variants],
+            steps: T::Array[Privy::Wallets::WalletActionStep::Variants],
             type:
               Privy::WalletActionTransferSucceededWebhookPayload::Type::TaggedSymbol,
             wallet_action_id: String,

data/rbi/privy/models/wallet_archive_params.rbi

@@ -0,0 +1,40 @@
+# typed: strong
+
+module Privy
+  module Models
+    class WalletArchiveParams < Privy::Internal::Type::BaseModel
+      extend Privy::Internal::Type::RequestParameters::Converter
+      include Privy::Internal::Type::RequestParameters
+
+      OrHash =
+        T.type_alias do
+          T.any(Privy::WalletArchiveParams, Privy::Internal::AnyHash)
+        end
+
+      # ID of the wallet.
+      sig { returns(String) }
+      attr_accessor :wallet_id
+
+      sig do
+        params(
+          wallet_id: String,
+          request_options: Privy::RequestOptions::OrHash
+        ).returns(T.attached_class)
+      end
+      def self.new(
+        # ID of the wallet.
+        wallet_id:,
+        request_options: {}
+      )
+      end
+
+      sig do
+        override.returns(
+          { wallet_id: String, request_options: Privy::RequestOptions }
+        )
+      end
+      def to_hash
+      end
+    end
+  end
+end