RubyGems - primary_connect_proto - Versions diffs - 0.20.0 → 0.22.0 - Mend

primary_connect_proto 0.20.0 → 0.22.0

Files changed (3465) hide show

data/vendor/bundle/ruby/3.0.0/gems/pry-byebug-3.9.0/CHANGELOG.md DELETED Viewed

@@ -1,214 +0,0 @@
-# CHANGELOG
-## Master (Unreleased)
-## 3.9.0 (2020-03-21)
-### Fixed
-* Dependency on pry being too loose. Now breaking minor releases of pry won't affect pry-byebug users (#289).
-### Added
-* Support for pry 0.13.0 (#266).
-### Removed
-* Support for pry older than 0.13.0 (#289).
-## 3.8.0 (2020-01-22)
-### Fixed
-* Use `Binding#source_location` instead of evaluating `__FILE__` to avoid
-  warnings on Ruby 2.7 and on Ruby 2.6 in verbose mode (#221).
-### Removed
-* Support for Ruby 2.3. Pry-byebug no longer installs on this platform.
-## 3.7.0 (2019-02-21)
-* Byebug 11 compatibility, with ruby 2.6 support.
-## 3.6.0 (2018-02-07)
-### Added
-* Byebug 10 compatibility, with ruby 2.5 support.
-## 3.5.1 (2017-11-27)
-### Fixed
-* Allow other threads like Pry (#142).
-## 3.5.0 (2017-08-23)
-### Added
-* Byebug 9.1 support. As a result, Ruby 2.0 & Ruby 2.1 support has been dropped.
-  Pry-byebug no longer installs on these platforms.
-## 3.4.3 (2017-08-22)
-### Fixed
-* Installation on old rubies after byebug dropping support for them.
-## 3.4.2 (2016-12-06)
-### Fixed
-* Byebug doesn't start after `disable-pry` command.
-## 3.4.1 (2016-11-22)
-### Fixed
-* control_d handler not being required properly when `pry-byebug` loaded
-  as a `pry` plugin and not through explicit require.
-## 3.4.0 (2016-05-15)
-### Fixed
-* Byebug 9 compatibility.
-### Added
-* A new `backtrace` command.
-## 3.3.0 (2015-11-05)
-### Fixed
-* Byebug 8 compatibility.
-* Fix encoding error in gemspec file (#70).
-* Debugger being too slow (#80, thanks @k0kubun).
-## 3.2.0 (2015-07-18)
-### Added
-* `continue` can now receive a line number argument (#56).
-### Fixed
-* Conflicts with `break` and `next` Ruby keywords inside multiline statements
-  (#44).
-### Removed
-* `breaks` command. It was broken anyways (#47).
-## 3.1.0 (2015-04-14)
-### Added
-* Frame navigation commands `up`, `down` and `frame`.
-## 3.0.1 (2015-04-02)
-### Fixed
-* Several formatting and alignment issues.
-## 3.0.0 (2015-02-02)
-### Fixed
-* `binding.pry` would not stop at the correct place when called at the last
-  line of a method/block.
-### Removed
-* Stepping aliases for `next` (`n`), `step` (`s`), `finish` (`f`) and `continue`
-  (`c`). See #34.
-## 2.0.0 (2014-01-09)
-### Fixed
-* Byebug 3 compatibility.
-* Pry not starting at the first line after `binding.pry`  but at `binding.pry`.
-* `continue` not finishing pry instance (#13).
-## 1.3.3 (2014-25-06)
-### Fixed
-* Pry 0.10 series and further minor version level releases compatibility.
-## 1.3.2 (2014-24-02)
-### Fixed
-* Bug inherited from `byebug`.
-## 1.3.1 (2014-08-02)
-### Fixed
-* Bug #22 (thanks @andreychernih).
-## 1.3.0 (2014-05-02)
-### Added
-* Breakpoints on method names (thanks @andreychernih & @palkan).
-### Fixed
-* "Undefined method `interface`" error (huge thanks to @andreychernih).
-## 1.2.1 (2013-30-12)
-### Fixed
-* "Uncaught throw :breakout_nav" error (thanks @lukebergen).
-## 1.2.0 (2013-24-09)
-### Fixed
-* Compatibility with byebug's 2.x series
-## 1.1.2 (2013-11-07)
-### Fixed
-* Compatibility with backwards compatible byebug versions.
-## 1.1.1 (2013-02-07)
-### Fixed
-* Bug when doing `step n` or `next n` where n > 1 right after `binding.pry`.
-## 1.1.0 (2013-06-06)
-### Added
-* `s`, `n`, `f` and `c` aliases (thanks @jgakos!).
-## 1.0.1 (2013-05-07)
-### Fixed
-* Unwanted debugging printf.
-## 1.0.0 (2013-05-07)
-### Added
-* Initial release forked from
-  [pry-debugger](https://github.com/nixme/pry-debugger) to support byebug.
-### Removed
-* pry-remote support.
-## Older releases
-* Check [pry-debugger](https://github.com/nixme/pry-debugger)'s CHANGELOG.

data/vendor/bundle/ruby/3.0.0/gems/pry-byebug-3.9.0/LICENSE DELETED Viewed

@@ -1,20 +0,0 @@
-MIT License
-Copyright (c) 2018 David Rodríguez <deivid.rodriguez@riseup.net>
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the "Software"), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
-the Software, and to permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
-FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
-COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/bundle/ruby/3.0.0/gems/pry-byebug-3.9.0/README.md DELETED Viewed

@@ -1,192 +0,0 @@
-# pry-byebug
-[![Version][VersionBadge]][VersionURL]
-[![Build][CIBadge]][CIURL]
-[![Inline docs][InchCIBadge]][InchCIURL]
-[![Coverage][CoverageBadge]][CoverageURL]
-Adds step-by-step debugging and stack navigation capabilities to [pry] using
-[byebug].
-To use, invoke pry normally. No need to start your script or app differently.
-Execution will stop in the first statement after your `binding.pry`.
-```ruby
-def some_method
-  puts 'Hello World' # Run 'step' in the console to move here
-end
-binding.pry
-some_method          # Execution will stop here.
-puts 'Goodbye World' # Run 'next' in the console to move here.
-```
-## Requirements
-MRI 2.4.0 or higher.
-## Installation
-Add
-```ruby
-gem 'pry-byebug'
-```
-to your Gemfile and run
-```console
-bundle install
-```
-Make sure you include the gem globally or inside the `:test` group if you plan
-to use it to debug your tests!
-## Commands
-### Step-by-step debugging
-**break:** Manage breakpoints.
-**step:** Step execution into the next line or method. Takes an optional numeric
-argument to step multiple times.
-**next:** Step over to the next line within the same frame. Also takes an
-optional numeric argument to step multiple lines.
-**finish:** Execute until current stack frame returns.
-**continue:** Continue program execution and end the Pry session.
-### Callstack navigation
-**backtrace:** Shows the current stack. You can use the numbers on the left
-side with the `frame` command to navigate the stack.
-**up:** Moves the stack frame up. Takes an optional numeric argument to move
-multiple frames.
-**down:** Moves the stack frame down. Takes an optional numeric argument to move
-multiple frames.
-**frame:** Moves to a specific frame. Called without arguments will show the
-current frame.
-## Matching Byebug Behaviour
-If you're coming from Byebug or from Pry-Byebug versions previous to 3.0, you
-may be lacking the 'n', 's', 'c' and 'f' aliases for the stepping commands.
-These aliases were removed by default because they usually conflict with
-scratch variable names. But it's very easy to reenable them if you still want
-them, just add the following shortcuts to your `~/.pryrc` file:
-```ruby
-if defined?(PryByebug)
-  Pry.commands.alias_command 'c', 'continue'
-  Pry.commands.alias_command 's', 'step'
-  Pry.commands.alias_command 'n', 'next'
-  Pry.commands.alias_command 'f', 'finish'
-end
-```
-Also, you might find useful as well the repeat the last command by just hitting
-the `Enter` key (e.g., with `step` or `next`). To achieve that, add this to
-your `~/.pryrc` file:
-```ruby
-# Hit Enter to repeat last command
-Pry::Commands.command /^$/, "repeat last command" do
-  _pry_.run_command Pry.history.to_a.last
-end
-```
-## Breakpoints
-You can set and adjust breakpoints directly from a Pry session using the
-`break` command:
-**break:** Set a new breakpoint from a line number in the current file, a file
-and line number, or a method. Pass an optional expression to create a
-conditional breakpoint. Edit existing breakpoints via various flags.
-Examples:
-```ruby
-break SomeClass#run            # Break at the start of `SomeClass#run`.
-break Foo#bar if baz?          # Break at `Foo#bar` only if `baz?`.
-break app/models/user.rb:15    # Break at line 15 in user.rb.
-break 14                       # Break at line 14 in the current file.
-break --condition 4 x > 2      # Change condition on breakpoint #4 to 'x > 2'.
-break --condition 3            # Remove the condition on breakpoint #3.
-break --delete 5               # Delete breakpoint #5.
-break --disable-all            # Disable all breakpoints.
-break                          # List all breakpoints.
-break --show 2                 # Show details about breakpoint #2.
-```
-Type `break --help` from a Pry session to see all available options.
-## Alternatives
-Note that all of the alternatives here are incompatible with pry-byebug. If
-your platform is supported by pry-byebug, you should remove any of the gems
-mentioned here if they are present in your Gemfile.
-* [pry-debugger]: Provides step-by-step debugging for MRI 1.9.3 or older
-  rubies. If you're still using those and need a step-by-step debugger to help
-  with the upgrade, pry-debugger can be handy.
-* [pry-stack_explorer]: Provides stack navigation capabilities for MRI 1.9.3 or
-  older rubies. If you're still using those and need to navigate your stack to
-  help with the upgrade, pry-stack_explorer can be handy.
-* [pry-nav]: Provides step-by-step debugging for JRuby.
-## Contribute
-See [Getting Started with Development](CONTRIBUTING.md).
-## Funding
-Subscribe to [Tidelift] to ensure pry-byebug stays actively maintained, and at
-the same time get licensing assurances and timely security notifications for
-your open source dependencies.
-You can also help `pry-byebug` by leaving a small (or big) tip through [Liberapay].
-[Tidelift]: https://tidelift.com/subscription/pkg/rubygems-pry-byebug?utm_source=rubygems-pry-byebug&utm_medium=referral&utm_campaign=readme
-[Liberapay]: https://liberapay.com/pry-byebug/donate
-## Security contact information
-Please use the Tidelift security contact to [report a security vulnerability].
-Tidelift will coordinate the fix and disclosure.
-[report a security vulnerability]: https://tidelift.com/security
-## Credits
-* Gopal Patel (@nixme), creator of [pry-debugger], and everybody who contributed
-  to it. pry-byebug is a fork of pry-debugger so it wouldn't exist as it is
-  without those contributions.
-* John Mair (@banister), creator of [pry].
-Patches and bug reports are welcome.
-[pry]: http://pry.github.com
-[byebug]: https://github.com/deivid-rodriguez/byebug
-[pry-debugger]: https://github.com/nixme/pry-debugger
-[pry-nav]: https://github.com/nixme/pry-nav
-[pry-stack_explorer]: https://github.com/pry/pry-stack_explorer
-[VersionBadge]: https://badge.fury.io/rb/pry-byebug.svg
-[VersionURL]: http://badge.fury.io/rb/pry-byebug
-[CIBadge]: https://github.com/deivid-rodriguez/pry-byebug/workflows/ubuntu/badge.svg?branch=master
-[CIURL]: https://github.com/deivid-rodriguez/pry-byebug/actions?query=workflow%3Aubuntu
-[InchCIBadge]: http://inch-ci.org/github/deivid-rodriguez/pry-byebug.svg?branch=master
-[InchCIURL]: http://inch-ci.org/github/deivid-rodriguez/pry-byebug
-[CoverageBadge]: https://api.codeclimate.com/v1/badges/a88e27809329c03af017/test_coverage
-[CoverageURL]: https://codeclimate.com/github/deivid-rodriguez/pry-byebug/test_coverage

data/vendor/bundle/ruby/3.0.0/gems/pry-byebug-3.9.0/lib/byebug/processors/pry_processor.rb DELETED Viewed

@@ -1,166 +0,0 @@
-# frozen_string_literal: true
-require "byebug/core"
-module Byebug
-  #
-  # Extends raw byebug's processor.
-  #
-  class PryProcessor < CommandProcessor
-    attr_accessor :pry
-    extend Forwardable
-    def_delegators :@pry, :output
-    def_delegators Pry::Helpers::Text, :bold
-    def self.start
-      Byebug.start
-      Setting[:autolist] = false
-      Context.processor = self
-      Byebug.current_context.step_out(4, true)
-    end
-    #
-    # Wrap a Pry REPL to catch navigational commands and act on them.
-    #
-    def run(&_block)
-      return_value = nil
-      command = catch(:breakout_nav) do # Throws from PryByebug::Commands
-        return_value = allowing_other_threads { yield }
-        {} # Nothing thrown == no navigational command
-      end
-      # Pry instance to resume after stepping
-      @pry = command[:pry]
-      perform(command[:action], command[:options])
-      return_value
-    end
-    #
-    # Set up a number of navigational commands to be performed by Byebug.
-    #
-    def perform(action, options = {})
-      return unless %i[
-        backtrace
-        down
-        finish
-        frame
-        next
-        step
-        up
-      ].include?(action)
-      send("perform_#{action}", options)
-    end
-    # --- Callbacks from byebug C extension ---
-    #
-    # Called when the debugger wants to stop at a regular line
-    #
-    def at_line
-      resume_pry
-    end
-    #
-    # Called when the debugger wants to stop right before a method return
-    #
-    def at_return(_return_value)
-      resume_pry
-    end
-    #
-    # Called when the debugger wants to stop right before the end of a class
-    # definition
-    #
-    def at_end
-      resume_pry
-    end
-    #
-    # Called when a breakpoint is hit. Note that `at_line`` is called
-    # inmediately after with the context's `stop_reason == :breakpoint`, so we
-    # must not resume the pry instance here
-    #
-    def at_breakpoint(breakpoint)
-      @pry ||= Pry.new
-      output.puts bold("\n  Breakpoint #{breakpoint.id}. ") + n_hits(breakpoint)
-      expr = breakpoint.expr
-      return unless expr
-      output.puts bold("Condition: ") + expr
-    end
-    private
-    def n_hits(breakpoint)
-      n_hits = breakpoint.hit_count
-      n_hits == 1 ? "First hit" : "Hit #{n_hits} times."
-    end
-    #
-    # Resume an existing Pry REPL at the paused point.
-    #
-    def resume_pry
-      new_binding = frame._binding
-      run do
-        if defined?(@pry) && @pry
-          @pry.repl(new_binding)
-        else
-          @pry = Pry.start_without_pry_byebug(new_binding)
-        end
-      end
-    end
-    def perform_backtrace(_options)
-      Byebug::WhereCommand.new(self, "backtrace").execute
-      resume_pry
-    end
-    def perform_next(options)
-      lines = (options[:lines] || 1).to_i
-      context.step_over(lines, frame.pos)
-    end
-    def perform_step(options)
-      times = (options[:times] || 1).to_i
-      context.step_into(times, frame.pos)
-    end
-    def perform_finish(*)
-      context.step_out(1)
-    end
-    def perform_up(options)
-      times = (options[:times] || 1).to_i
-      Byebug::UpCommand.new(self, "up #{times}").execute
-      resume_pry
-    end
-    def perform_down(options)
-      times = (options[:times] || 1).to_i
-      Byebug::DownCommand.new(self, "down #{times}").execute
-      resume_pry
-    end
-    def perform_frame(options)
-      index = options[:index] ? options[:index].to_i : ""
-      Byebug::FrameCommand.new(self, "frame #{index}").execute
-      resume_pry
-    end
-  end
-end