poppler 3.0.7-x86-mingw32 → 3.0.8-x86-mingw32

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 69b7945920348588edc46e79e0b6f07dabb3bf0b
-  data.tar.gz: 952d840183f63f9ac728b4bfe16e67aec6d86965
+  metadata.gz: 4a7bea49a07a01a9e3834b67f6ede5d047bb2ba1
+  data.tar.gz: ac1df09902c61b8d87cba1f3de9987c5ff737a96
 SHA512:
-  metadata.gz: b0ea2c40e473471c7df030b21dba254bdc28db13c6fc12e424dab0b91695791c8133cb1539e68c405595f0530a0b87292c3fc7e8a196deba466b5cf93110d1d3
-  data.tar.gz: 7ca1fa9b274911c392e77d1f36348cea445f2b0a31ff8446bb6581c9aeb4c466e0ce3b7e636396b7eee70c90dc095094d43c3cf74f5485ed25f40009a1689ba4
+  metadata.gz: 3861b8d6ece9a12c556a999822bad180a9ce59c06a630df0a4135a6dd1a9721bb4fcb9455cb8fe9f42e0ca89cc70754aba3a2f9c8120f0cf4569c1fadc72da38
+  data.tar.gz: bf67a5a340bdc18b80b8327062ca61c30c0ef1dd719535302be812a5fa84ee9900b48a6f0c11bdd124aa03e24dea9ee0e073d575974481d1e929ffd1932119e2

data/Rakefile

@@ -36,8 +36,8 @@ package_task = GNOME2::Rake::PackageTask.new do |package|
   package.external_packages = [
     {
       :name => "libjpeg",
-      :base_name => "jpeg-9a",
-      :archive_base_name => "jpegsrc.v9a.tar.gz",
+      :base_name => "jpeg-9b",
+      :archive_base_name => "jpegsrc.v9b.tar.gz",
       :download_base_url => "http://www.ijg.org/files",
       :label => "libjpeg",
       :windows => {
@@ -47,9 +47,9 @@ package_task = GNOME2::Rake::PackageTask.new do |package|
     },
     {
       :name => "sqlite-autoconf",
-      :download_base_url => "http://www.sqlite.org/2015",
+      :download_base_url => "http://www.sqlite.org/2016",
       :label => "SQLite",
-      :version => "3081101",
+      :version => "3120000",
       :compression_method => "gz",
       :windows => {
         :configure_args => [],
@@ -71,9 +71,9 @@ package_task = GNOME2::Rake::PackageTask.new do |package|
     },
     {
       :name => "poppler",
-      :download_base_url => "http://poppler.freedesktop.org",
+      :download_base_url => "https://poppler.freedesktop.org",
       :label => "Poppler",
-      :version => "0.36.0",
+      :version => "0.42.0",
       :compression_method => "xz",
       :windows => {
         :configure_args => [

data/ext/poppler/extconf.rb

@@ -46,6 +46,7 @@ end
 setup_windows(module_name, base_dir)
 
 unless required_pkg_config_package([package_id, 0, 12, 0],
+                                   :altlinux => "libpoppler-glib-devel",
                                    :debian => "libpoppler-glib-dev",
                                    :redhat => "poppler-glib-devel",
                                    :arch => "poppler",

data/ext/poppler/rbpoppler.c

@@ -56,7 +56,6 @@ Init_poppler(void)
                                 INT2FIX(POPPLER_MICRO_VERSION)));
 
     G_DEF_CLASS(POPPLER_TYPE_ERROR, "Error", RG_TARGET_NAMESPACE);
-    G_DEF_CLASS(POPPLER_TYPE_ORIENTATION, "Orientation", RG_TARGET_NAMESPACE);
 
     G_DEF_CLASS(POPPLER_TYPE_PAGE_TRANSITION_TYPE,
                 "PageTransitionType", RG_TARGET_NAMESPACE);

data/lib/poppler.rb

@@ -54,7 +54,7 @@ module Poppler
   class Document
     private
     def pdf_data?(data)
-      /\A%PDF-1\.\d/ =~ data
+      data.start_with?("%PDF-1.")
     end
 
     def ensure_uri(uri)

data/test/poppler-test-utils.rb

@@ -22,7 +22,7 @@ module PopplerTestUtils
   def form_pdf
     file = File.join(fixtures_dir, "form.pdf")
     return file if File.exist?(file)
-    pdf = open("http://www.irs.gov/pub/irs-pdf/fw9.pdf").read
+    pdf = open("https://www.irs.gov/pub/irs-pdf/fw9.pdf").read
     File.open(file, "wb") do |output|
       output.print(pdf)
     end

data/vendor/local/include/jpeglib.h

@@ -2,7 +2,7 @@
  * jpeglib.h
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2002-2013 by Guido Vollbeding.
+ * Modified 2002-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,7 +39,7 @@ extern "C" {
 
 #define JPEG_LIB_VERSION        90	/* Compatibility version 9.0 */
 #define JPEG_LIB_VERSION_MAJOR  9
-#define JPEG_LIB_VERSION_MINOR  1
+#define JPEG_LIB_VERSION_MINOR  2
 
 
 /* Various constants determining the sizes of things.
@@ -979,7 +979,7 @@ EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
 			       unsigned char ** outbuffer,
 			       unsigned long * outsize));
 EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
-			      unsigned char * inbuffer,
+			      const unsigned char * inbuffer,
 			      unsigned long insize));
 
 /* Default parameter setup for compression */

data/vendor/local/include/poppler/cpp/poppler-version.h

@@ -21,9 +21,9 @@
 
 #include "poppler-global.h"
 
-#define POPPLER_VERSION "0.36.0"
+#define POPPLER_VERSION "0.42.0"
 #define POPPLER_VERSION_MAJOR 0
-#define POPPLER_VERSION_MINOR 36
+#define POPPLER_VERSION_MINOR 42
 #define POPPLER_VERSION_MICRO 0
 
 namespace poppler

data/vendor/local/include/poppler/glib/poppler-enums.h

@@ -92,8 +92,6 @@ GType poppler_structure_table_scope_get_type (void) G_GNUC_CONST;
 /* enumerations from "poppler.h" */
 GType poppler_error_get_type (void) G_GNUC_CONST;
 #define POPPLER_TYPE_ERROR (poppler_error_get_type ())
-GType poppler_orientation_get_type (void) G_GNUC_CONST;
-#define POPPLER_TYPE_ORIENTATION (poppler_orientation_get_type ())
 GType poppler_page_transition_type_get_type (void) G_GNUC_CONST;
 #define POPPLER_TYPE_PAGE_TRANSITION_TYPE (poppler_page_transition_type_get_type ())
 GType poppler_page_transition_alignment_get_type (void) G_GNUC_CONST;

data/vendor/local/include/poppler/glib/poppler-features.h

@@ -55,7 +55,7 @@
  *
  * Since: 0.12
  */
-#define POPPLER_MINOR_VERSION (36)
+#define POPPLER_MINOR_VERSION (42)
 
 /**
  * POPPLER_MICRO_VERSION:

data/vendor/local/include/poppler/glib/poppler-page.h

@@ -299,6 +299,7 @@ struct _PopplerPageTransition
   gint angle;
   gdouble scale;
   gboolean rectangular;
+  gdouble duration_real;
 };
 
 GType                  poppler_page_transition_get_type (void) G_GNUC_CONST;

data/vendor/local/include/poppler/glib/poppler.h

@@ -46,14 +46,6 @@ typedef enum
   POPPLER_ERROR_DAMAGED
 } PopplerError;
 
-typedef enum
-{
-  POPPLER_ORIENTATION_PORTRAIT,
-  POPPLER_ORIENTATION_LANDSCAPE,
-  POPPLER_ORIENTATION_UPSIDEDOWN,
-  POPPLER_ORIENTATION_SEASCAPE
-} PopplerOrientation;
-
 /**
  * PopplerPageTransitionType:
  * @POPPLER_PAGE_TRANSITION_REPLACE: the new page replace the old one

data/vendor/local/include/sqlite3.h

@@ -111,9 +111,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.8.11.1"
-#define SQLITE_VERSION_NUMBER 3008011
-#define SQLITE_SOURCE_ID      "2015-07-29 20:00:57 cf538e2783e468bbc25e7cb2a9ee64d3e0e80b2f"
+#define SQLITE_VERSION        "3.12.0"
+#define SQLITE_VERSION_NUMBER 3012000
+#define SQLITE_SOURCE_ID      "2016-03-29 10:14:15 e9bb4cf40f4971974a74468ef922bdee481c988b"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -124,7 +124,7 @@ extern "C" {
 ** but are associated with the library instead of the header file.  ^(Cautious
 ** programmers might include assert() statements in their application to
 ** verify that values returned by these interfaces match the macros in
-** the header, and thus insure that the application is
+** the header, and thus ensure that the application is
 ** compiled with matching library and header files.
 **
 ** <blockquote><pre>
@@ -347,7 +347,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**);
 ** from [sqlite3_malloc()] and passed back through the 5th parameter.
 ** To avoid memory leaks, the application should invoke [sqlite3_free()]
 ** on error message strings returned through the 5th parameter of
-** of sqlite3_exec() after the error message string is no longer needed.
+** sqlite3_exec() after the error message string is no longer needed.
 ** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
 ** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
 ** NULL before returning.
@@ -374,7 +374,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**);
 ** Restrictions:
 **
 ** <ul>
-** <li> The application must insure that the 1st parameter to sqlite3_exec()
+** <li> The application must ensure that the 1st parameter to sqlite3_exec()
 **      is a valid and open [database connection].
 ** <li> The application must not close the [database connection] specified by
 **      the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
@@ -477,6 +477,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_IOERR_MMAP              (SQLITE_IOERR | (24<<8))
 #define SQLITE_IOERR_GETTEMPPATH       (SQLITE_IOERR | (25<<8))
 #define SQLITE_IOERR_CONVPATH          (SQLITE_IOERR | (26<<8))
+#define SQLITE_IOERR_VNODE             (SQLITE_IOERR | (27<<8))
+#define SQLITE_IOERR_AUTH              (SQLITE_IOERR | (28<<8))
 #define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
 #define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
 #define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
@@ -792,8 +794,13 @@ struct sqlite3_io_methods {
 ** <li>[[SQLITE_FCNTL_FILE_POINTER]]
 ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
 ** to the [sqlite3_file] object associated with a particular database
-** connection.  See the [sqlite3_file_control()] documentation for
-** additional information.
+** connection.  See also [SQLITE_FCNTL_JOURNAL_POINTER].
+**
+** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
+** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with the journal file (either
+** the [rollback journal] or the [write-ahead log]) for a particular database
+** connection.  See also [SQLITE_FCNTL_FILE_POINTER].
 **
 ** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
 ** No longer in use.
@@ -880,6 +887,15 @@ struct sqlite3_io_methods {
 ** pointer in case this file-control is not implemented.  This file-control
 ** is intended for diagnostic use only.
 **
+** <li>[[SQLITE_FCNTL_VFS_POINTER]]
+** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
+** [VFSes] currently in use.  ^(The argument X in
+** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
+** of type "[sqlite3_vfs] **".  This opcodes will set *X
+** to a pointer to the top-level VFS.)^
+** ^When there are multiple VFS shims in the stack, this opcode finds the
+** upper-most shim only.
+**
 ** <li>[[SQLITE_FCNTL_PRAGMA]]
 ** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] 
 ** file control is sent to the open [sqlite3_file] object corresponding
@@ -998,6 +1014,8 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_WAL_BLOCK              24
 #define SQLITE_FCNTL_ZIPVFS                 25
 #define SQLITE_FCNTL_RBU                    26
+#define SQLITE_FCNTL_VFS_POINTER            27
+#define SQLITE_FCNTL_JOURNAL_POINTER        28
 
 /* deprecated names */
 #define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -1210,7 +1228,7 @@ struct sqlite3_vfs {
   const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
   /*
   ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
-  ** New fields may be appended in figure versions.  The iVersion
+  ** New fields may be appended in future versions.  The iVersion
   ** value will increment whenever this happens. 
   */
 };
@@ -1366,9 +1384,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
 ** applications and so this routine is usually not necessary.  It is
 ** provided to support rare applications with unusual needs.
 **
-** The sqlite3_config() interface is not threadsafe.  The application
-** must insure that no other SQLite interfaces are invoked by other
-** threads while sqlite3_config() is running.  Furthermore, sqlite3_config()
+** <b>The sqlite3_config() interface is not threadsafe. The application
+** must ensure that no other SQLite interfaces are invoked by other
+** threads while sqlite3_config() is running.</b>
+**
+** The sqlite3_config() interface
 ** may only be invoked prior to library initialization using
 ** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
 ** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
@@ -1595,29 +1615,34 @@ struct sqlite3_mem_methods {
 ** </dd>
 **
 ** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
 ** that SQLite can use for the database page cache with the default page
 ** cache implementation.  
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
-** configuration option.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
 ** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned
-** memory, the size of each page buffer (sz), and the number of pages (N).
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
 ** The sz argument should be the size of the largest database page
 ** (a power of two between 512 and 65536) plus some extra bytes for each
 ** page header.  ^The number of extra bytes needed by the page header
-** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option 
-** to [sqlite3_config()].
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
 ** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary.  The first
-** argument should pointer to an 8-byte aligned block of memory that
-** is at least sz*N bytes of memory, otherwise subsequent behavior is
-** undefined.
-** ^SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache.  ^If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
+** for the sz parameter to be larger than necessary.  The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
 **
 ** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
 ** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer 
@@ -1795,6 +1820,20 @@ struct sqlite3_mem_methods {
 ** is enabled (using the [PRAGMA threads] command) and the amount of content
 ** to be sorted exceeds the page size times the minimum of the
 ** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.  
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
 ** </dl>
 */
 #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
@@ -1822,6 +1861,7 @@ struct sqlite3_mem_methods {
 #define SQLITE_CONFIG_WIN32_HEAPSIZE      23  /* int nByte */
 #define SQLITE_CONFIG_PCACHE_HDRSZ        24  /* int *psz */
 #define SQLITE_CONFIG_PMASZ               25  /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL      26  /* int nByte */
 
 /*
 ** CAPI3REF: Database Connection Configuration Options
@@ -1879,11 +1919,25 @@ struct sqlite3_mem_methods {
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the trigger setting is not reported back. </dd>
 **
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call.  The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
 ** </dl>
 */
-#define SQLITE_DBCONFIG_LOOKASIDE       1001  /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY     1002  /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER  1003  /* int int* */
+#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
 
 
 /*
@@ -3373,7 +3427,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 **
 ** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
 ** [prepared statement] S has been stepped at least once using 
-** [sqlite3_step(S)] but has not run to completion and/or has not 
+** [sqlite3_step(S)] but has neither run to completion (returned
+** [SQLITE_DONE] from [sqlite3_step(S)]) nor
 ** been reset using [sqlite3_reset(S)].  ^The sqlite3_stmt_busy(S)
 ** interface returns false if S is a NULL pointer.  If S is not a 
 ** NULL pointer and is not a pointer to a valid [prepared statement]
@@ -3626,7 +3681,7 @@ SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*,
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_index()].
+** [sqlite3_bind_parameter_name()].
 */
 SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
 
@@ -4355,6 +4410,22 @@ SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
 SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
 SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
 
+/*
+** CAPI3REF: Finding The Subtype Of SQL Values
+** METHOD: sqlite3_value
+**
+** The sqlite3_value_subtype(V) function returns the subtype for
+** an [application-defined SQL function] argument V.  The subtype
+** information can be used to pass a limited amount of context from
+** one SQL function to another.  Use the [sqlite3_result_subtype()]
+** routine to set the subtype for the return value of an SQL function.
+**
+** SQLite makes no use of subtype itself.  It merely passes the subtype
+** from the result of one [application-defined SQL function] into the
+** input of another.
+*/
+SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+
 /*
 ** CAPI3REF: Copy And Free SQL Values
 ** METHOD: sqlite3_value
@@ -4369,8 +4440,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
 ** previously obtained from [sqlite3_value_dup()].  ^If V is a NULL pointer
 ** then sqlite3_value_free(V) is a harmless no-op.
 */
-SQLITE_API SQLITE_EXPERIMENTAL sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
 
 /*
 ** CAPI3REF: Obtain Aggregate Function Context
@@ -4654,6 +4725,21 @@ SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_va
 SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
 SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
 
+
+/*
+** CAPI3REF: Setting The Subtype Of An SQL Function
+** METHOD: sqlite3_context
+**
+** The sqlite3_result_subtype(C,T) function causes the subtype of
+** the result from the [application-defined SQL function] with 
+** [sqlite3_context] C to be the value T.  Only the lower 8 bits 
+** of the subtype T are preserved in current versions of SQLite;
+** higher order bits are discarded.
+** The number of subtype bytes preserved by SQLite might increase
+** in future releases of SQLite.
+*/
+SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+
 /*
 ** CAPI3REF: Define New Collating Sequences
 ** METHOD: sqlite3
@@ -5574,6 +5660,17 @@ struct sqlite3_module {
 ** ^Information about the ORDER BY clause is stored in aOrderBy[].
 ** ^Each term of aOrderBy records a column of the ORDER BY clause.
 **
+** The colUsed field indicates which columns of the virtual table may be
+** required by the current scan. Virtual table columns are numbered from
+** zero in the order in which they appear within the CREATE TABLE statement
+** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
+** the corresponding bit is set within the colUsed mask if the column may be
+** required by SQLite. If the table has at least 64 columns and any column
+** to the right of the first 63 is required, then bit 63 of colUsed is also
+** set. In other words, column iCol may be required if the expression
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to 
+** non-zero.
+**
 ** The [xBestIndex] method must fill aConstraintUsage[] with information
 ** about what parameters to pass to xFilter.  ^If argvIndex>0 then
 ** the right-hand side of the corresponding aConstraint[] is evaluated
@@ -5599,19 +5696,37 @@ struct sqlite3_module {
 ** ^The estimatedRows value is an estimate of the number of rows that
 ** will be returned by the strategy.
 **
+** The xBestIndex method may optionally populate the idxFlags field with a 
+** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag -
+** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite
+** assumes that the strategy may visit at most one row. 
+**
+** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then
+** SQLite also assumes that if a call to the xUpdate() method is made as
+** part of the same statement to delete or update a virtual table row and the
+** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback
+** any database changes. In other words, if the xUpdate() returns
+** SQLITE_CONSTRAINT, the database contents must be exactly as they were
+** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not
+** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by
+** the xUpdate method are automatically rolled back by SQLite.
+**
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
 ** structure for SQLite version 3.8.2. If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
-** value greater than or equal to 3008002.
+** value greater than or equal to 3008002. Similarly, the idxFlags field
+** was added for version 3.9.0. It may therefore only be used if
+** sqlite3_libversion_number() returns a value greater than or equal to
+** 3009000.
 */
 struct sqlite3_index_info {
   /* Inputs */
   int nConstraint;           /* Number of entries in aConstraint */
   struct sqlite3_index_constraint {
-     int iColumn;              /* Column on left-hand side of constraint */
+     int iColumn;              /* Column constrained.  -1 for ROWID */
      unsigned char op;         /* Constraint operator */
      unsigned char usable;     /* True if this constraint is usable */
      int iTermOffset;          /* Used internally - xBestIndex should ignore */
@@ -5633,8 +5748,17 @@ struct sqlite3_index_info {
   double estimatedCost;           /* Estimated cost of using this index */
   /* Fields below are only available in SQLite 3.8.2 and later */
   sqlite3_int64 estimatedRows;    /* Estimated number of rows returned */
+  /* Fields below are only available in SQLite 3.9.0 and later */
+  int idxFlags;              /* Mask of SQLITE_INDEX_SCAN_* flags */
+  /* Fields below are only available in SQLite 3.10.0 and later */
+  sqlite3_uint64 colUsed;    /* Input: Mask of columns used by statement */
 };
 
+/*
+** CAPI3REF: Virtual Table Scan Flags
+*/
+#define SQLITE_INDEX_SCAN_UNIQUE      1     /* Scan visits at most 1 row */
+
 /*
 ** CAPI3REF: Virtual Table Constraint Operator Codes
 **
@@ -5643,12 +5767,15 @@ struct sqlite3_index_info {
 ** an operator that is part of a constraint term in the wHERE clause of
 ** a query that uses a [virtual table].
 */
-#define SQLITE_INDEX_CONSTRAINT_EQ    2
-#define SQLITE_INDEX_CONSTRAINT_GT    4
-#define SQLITE_INDEX_CONSTRAINT_LE    8
-#define SQLITE_INDEX_CONSTRAINT_LT    16
-#define SQLITE_INDEX_CONSTRAINT_GE    32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_EQ      2
+#define SQLITE_INDEX_CONSTRAINT_GT      4
+#define SQLITE_INDEX_CONSTRAINT_LE      8
+#define SQLITE_INDEX_CONSTRAINT_LT     16
+#define SQLITE_INDEX_CONSTRAINT_GE     32
+#define SQLITE_INDEX_CONSTRAINT_MATCH  64
+#define SQLITE_INDEX_CONSTRAINT_LIKE   65
+#define SQLITE_INDEX_CONSTRAINT_GLOB   66
+#define SQLITE_INDEX_CONSTRAINT_REGEXP 67
 
 /*
 ** CAPI3REF: Register A Virtual Table Implementation
@@ -6092,6 +6219,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
 ** <li>  SQLITE_MUTEX_STATIC_APP1
 ** <li>  SQLITE_MUTEX_STATIC_APP2
 ** <li>  SQLITE_MUTEX_STATIC_APP3
+** <li>  SQLITE_MUTEX_STATIC_VFS1
+** <li>  SQLITE_MUTEX_STATIC_VFS2
+** <li>  SQLITE_MUTEX_STATIC_VFS3
 ** </ul>
 **
 ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
@@ -6509,7 +6639,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_status64(
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
 ** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack.  It is only
+** <dd>The *pHighwater parameter records the deepest parser stack. 
+** The *pCurrent value is undefined.  The *pHighwater value is only
 ** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
 ** </dl>
 **
@@ -7295,18 +7426,43 @@ SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
 /*
 ** CAPI3REF: String Globbing
 *
-** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
-** the glob pattern P, and it returns non-zero if string X does not match
-** the glob pattern P.  ^The definition of glob pattern matching used in
+** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
+** string X matches the [GLOB] pattern P.
+** ^The definition of [GLOB] pattern matching used in
 ** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
-** SQL dialect used by SQLite.  ^The sqlite3_strglob(P,X) function is case
-** sensitive.
+** SQL dialect understood by SQLite.  ^The [sqlite3_strglob(P,X)] function
+** is case sensitive.
 **
 ** Note that this routine returns zero on a match and non-zero if the strings
 ** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strlike()].
 */
 SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
 
+/*
+** CAPI3REF: String LIKE Matching
+*
+** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
+** string X matches the [LIKE] pattern P with escape character E.
+** ^The definition of [LIKE] pattern matching used in
+** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
+** operator in the SQL dialect understood by SQLite.  ^For "X LIKE P" without
+** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
+** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
+** insensitive - equivalent upper and lower case ASCII characters match
+** one another.
+**
+** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
+** only ASCII characters are case folded.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strglob()].
+*/
+SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+
 /*
 ** CAPI3REF: Error Logging Interface
 **
@@ -7362,7 +7518,7 @@ SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...)
 ** previously registered write-ahead log callback. ^Note that the
 ** [sqlite3_wal_autocheckpoint()] interface and the
 ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** those overwrite any prior [sqlite3_wal_hook()] settings.
+** overwrite any prior [sqlite3_wal_hook()] settings.
 */
 SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
   sqlite3*, 
@@ -7727,6 +7883,145 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
 */
 SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 
+/*
+** CAPI3REF: Flush caches to disk mid-transaction
+**
+** ^If a write-transaction is open on [database connection] D when the
+** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
+** pages in the pager-cache that are not currently in use are written out 
+** to disk. A dirty page may be in use if a database cursor created by an
+** active SQL statement is reading from it, or if it is page 1 of a database
+** file (page 1 is always "in use").  ^The [sqlite3_db_cacheflush(D)]
+** interface flushes caches for all schemas - "main", "temp", and
+** any [attached] databases.
+**
+** ^If this function needs to obtain extra database locks before dirty pages 
+** can be flushed to disk, it does so. ^If those locks cannot be obtained 
+** immediately and there is a busy-handler callback configured, it is invoked
+** in the usual manner. ^If the required lock still cannot be obtained, then
+** the database is skipped and an attempt made to flush any dirty pages
+** belonging to the next (if any) database. ^If any databases are skipped
+** because locks cannot be obtained, but no other error occurs, this
+** function returns SQLITE_BUSY.
+**
+** ^If any other error occurs while flushing dirty pages to disk (for
+** example an IO error or out-of-memory condition), then processing is
+** abandoned and an SQLite [error code] is returned to the caller immediately.
+**
+** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
+**
+** ^This function does not set the database handle error code or message
+** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
+*/
+SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most reason I/O error or failure to open a file.
+** The return value is OS-dependent.  For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.  
+*/
+SQLITE_API int SQLITE_STDCALL sqlite3_system_errno(sqlite3*);
+
+/*
+** CAPI3REF: Database Snapshot
+** KEYWORDS: {snapshot}
+** EXPERIMENTAL
+**
+** An instance of the snapshot object records the state of a [WAL mode]
+** database for some specific point in history.
+**
+** In [WAL mode], multiple [database connections] that are open on the
+** same database file can each be reading a different historical version
+** of the database file.  When a [database connection] begins a read
+** transaction, that connection sees an unchanging copy of the database
+** as it existed for the point in time when the transaction first started.
+** Subsequent changes to the database from other connections are not seen
+** by the reader until a new read transaction is started.
+**
+** The sqlite3_snapshot object records state information about an historical
+** version of the database file so that it is possible to later open a new read
+** transaction that sees that historical version of the database rather than
+** the most recent version.
+**
+** The constructor for this object is [sqlite3_snapshot_get()].  The
+** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
+** to an historical snapshot (if possible).  The destructor for 
+** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
+*/
+typedef struct sqlite3_snapshot sqlite3_snapshot;
+
+/*
+** CAPI3REF: Record A Database Snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
+** new [sqlite3_snapshot] object that records the current state of
+** schema S in database connection D.  ^On success, the
+** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
+** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
+** ^If schema S of [database connection] D is not a [WAL mode] database
+** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)]
+** leaves the *P value unchanged and returns an appropriate [error code].
+**
+** The [sqlite3_snapshot] object returned from a successful call to
+** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
+** to avoid a memory leak.
+**
+** The [sqlite3_snapshot_get()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+  sqlite3 *db,
+  const char *zSchema,
+  sqlite3_snapshot **ppSnapshot
+);
+
+/*
+** CAPI3REF: Start a read transaction on an historical snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface attempts to move the
+** read transaction that is currently open on schema S of
+** [database connection] D so that it refers to historical [snapshot] P.
+** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
+** or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
+** the first operation, apart from other sqlite3_snapshot_open() calls,
+** following the [BEGIN] that starts a new read transaction.
+** ^A [snapshot] will fail to open if it has been overwritten by a 
+** [checkpoint].
+** ^A [snapshot] will fail to open if the database connection D has not
+** previously completed at least one read operation against the database 
+** file.  (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
+**
+** The [sqlite3_snapshot_open()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+  sqlite3 *db,
+  const char *zSchema,
+  sqlite3_snapshot *pSnapshot
+);
+
+/*
+** CAPI3REF: Destroy a snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
+** The application must eventually free every [sqlite3_snapshot] object
+** using this routine to avoid a memory leak.
+**
+** The [sqlite3_snapshot_free()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
 
 /*
 ** Undo the hack that converts floating point types to integer for
@@ -7858,3 +8153,581 @@ struct sqlite3_rtree_query_info {
 
 #endif  /* ifndef _SQLITE3RTREE_H_ */
 
+/*
+** 2014 May 31
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** Interfaces to extend FTS5. Using the interfaces defined in this file, 
+** FTS5 may be extended with:
+**
+**     * custom tokenizers, and
+**     * custom auxiliary functions.
+*/
+
+
+#ifndef _FTS5_H
+#define _FTS5_H
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*************************************************************************
+** CUSTOM AUXILIARY FUNCTIONS
+**
+** Virtual table implementations may overload SQL functions by implementing
+** the sqlite3_module.xFindFunction() method.
+*/
+
+typedef struct Fts5ExtensionApi Fts5ExtensionApi;
+typedef struct Fts5Context Fts5Context;
+typedef struct Fts5PhraseIter Fts5PhraseIter;
+
+typedef void (*fts5_extension_function)(
+  const Fts5ExtensionApi *pApi,   /* API offered by current FTS version */
+  Fts5Context *pFts,              /* First arg to pass to pApi functions */
+  sqlite3_context *pCtx,          /* Context for returning result/error */
+  int nVal,                       /* Number of values in apVal[] array */
+  sqlite3_value **apVal           /* Array of trailing arguments */
+);
+
+struct Fts5PhraseIter {
+  const unsigned char *a;
+  const unsigned char *b;
+};
+
+/*
+** EXTENSION API FUNCTIONS
+**
+** xUserData(pFts):
+**   Return a copy of the context pointer the extension function was 
+**   registered with.
+**
+** xColumnTotalSize(pFts, iCol, pnToken):
+**   If parameter iCol is less than zero, set output variable *pnToken
+**   to the total number of tokens in the FTS5 table. Or, if iCol is
+**   non-negative but less than the number of columns in the table, return
+**   the total number of tokens in column iCol, considering all rows in 
+**   the FTS5 table.
+**
+**   If parameter iCol is greater than or equal to the number of columns
+**   in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
+**   an OOM condition or IO error), an appropriate SQLite error code is 
+**   returned.
+**
+** xColumnCount(pFts):
+**   Return the number of columns in the table.
+**
+** xColumnSize(pFts, iCol, pnToken):
+**   If parameter iCol is less than zero, set output variable *pnToken
+**   to the total number of tokens in the current row. Or, if iCol is
+**   non-negative but less than the number of columns in the table, set
+**   *pnToken to the number of tokens in column iCol of the current row.
+**
+**   If parameter iCol is greater than or equal to the number of columns
+**   in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
+**   an OOM condition or IO error), an appropriate SQLite error code is 
+**   returned.
+**
+**   This function may be quite inefficient if used with an FTS5 table
+**   created with the "columnsize=0" option.
+**
+** xColumnText:
+**   This function attempts to retrieve the text of column iCol of the
+**   current document. If successful, (*pz) is set to point to a buffer
+**   containing the text in utf-8 encoding, (*pn) is set to the size in bytes
+**   (not characters) of the buffer and SQLITE_OK is returned. Otherwise,
+**   if an error occurs, an SQLite error code is returned and the final values
+**   of (*pz) and (*pn) are undefined.
+**
+** xPhraseCount:
+**   Returns the number of phrases in the current query expression.
+**
+** xPhraseSize:
+**   Returns the number of tokens in phrase iPhrase of the query. Phrases
+**   are numbered starting from zero.
+**
+** xInstCount:
+**   Set *pnInst to the total number of occurrences of all phrases within
+**   the query within the current row. Return SQLITE_OK if successful, or
+**   an error code (i.e. SQLITE_NOMEM) if an error occurs.
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
+**   (i.e. if it is a contentless table), then this API always returns 0.
+**
+** xInst:
+**   Query for the details of phrase match iIdx within the current row.
+**   Phrase matches are numbered starting from zero, so the iIdx argument
+**   should be greater than or equal to zero and smaller than the value
+**   output by xInstCount().
+**
+**   Usually, output parameter *piPhrase is set to the phrase number, *piCol
+**   to the column in which it occurs and *piOff the token offset of the
+**   first token of the phrase. The exception is if the table was created
+**   with the offsets=0 option specified. In this case *piOff is always
+**   set to -1.
+**
+**   Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM) 
+**   if an error occurs.
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. 
+**
+** xRowid:
+**   Returns the rowid of the current row.
+**
+** xTokenize:
+**   Tokenize text using the tokenizer belonging to the FTS5 table.
+**
+** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback):
+**   This API function is used to query the FTS table for phrase iPhrase
+**   of the current query. Specifically, a query equivalent to:
+**
+**       ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
+**
+**   with $p set to a phrase equivalent to the phrase iPhrase of the
+**   current query is executed. For each row visited, the callback function
+**   passed as the fourth argument is invoked. The context and API objects 
+**   passed to the callback function may be used to access the properties of
+**   each matched row. Invoking Api.xUserData() returns a copy of the pointer
+**   passed as the third argument to pUserData.
+**
+**   If the callback function returns any value other than SQLITE_OK, the
+**   query is abandoned and the xQueryPhrase function returns immediately.
+**   If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK.
+**   Otherwise, the error code is propagated upwards.
+**
+**   If the query runs to completion without incident, SQLITE_OK is returned.
+**   Or, if some error occurs before the query completes or is aborted by
+**   the callback, an SQLite error code is returned.
+**
+**
+** xSetAuxdata(pFts5, pAux, xDelete)
+**
+**   Save the pointer passed as the second argument as the extension functions 
+**   "auxiliary data". The pointer may then be retrieved by the current or any
+**   future invocation of the same fts5 extension function made as part of
+**   of the same MATCH query using the xGetAuxdata() API.
+**
+**   Each extension function is allocated a single auxiliary data slot for
+**   each FTS query (MATCH expression). If the extension function is invoked 
+**   more than once for a single FTS query, then all invocations share a 
+**   single auxiliary data context.
+**
+**   If there is already an auxiliary data pointer when this function is
+**   invoked, then it is replaced by the new pointer. If an xDelete callback
+**   was specified along with the original pointer, it is invoked at this
+**   point.
+**
+**   The xDelete callback, if one is specified, is also invoked on the
+**   auxiliary data pointer after the FTS5 query has finished.
+**
+**   If an error (e.g. an OOM condition) occurs within this function, an
+**   the auxiliary data is set to NULL and an error code returned. If the
+**   xDelete parameter was not NULL, it is invoked on the auxiliary data
+**   pointer before returning.
+**
+**
+** xGetAuxdata(pFts5, bClear)
+**
+**   Returns the current auxiliary data pointer for the fts5 extension 
+**   function. See the xSetAuxdata() method for details.
+**
+**   If the bClear argument is non-zero, then the auxiliary data is cleared
+**   (set to NULL) before this function returns. In this case the xDelete,
+**   if any, is not invoked.
+**
+**
+** xRowCount(pFts5, pnRow)
+**
+**   This function is used to retrieve the total number of rows in the table.
+**   In other words, the same value that would be returned by:
+**
+**        SELECT count(*) FROM ftstable;
+**
+** xPhraseFirst()
+**   This function is used, along with type Fts5PhraseIter and the xPhraseNext
+**   method, to iterate through all instances of a single query phrase within
+**   the current row. This is the same information as is accessible via the
+**   xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
+**   to use, this API may be faster under some circumstances. To iterate 
+**   through instances of phrase iPhrase, use the following code:
+**
+**       Fts5PhraseIter iter;
+**       int iCol, iOff;
+**       for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
+**           iCol>=0;
+**           pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
+**       ){
+**         // An instance of phrase iPhrase at offset iOff of column iCol
+**       }
+**
+**   The Fts5PhraseIter structure is defined above. Applications should not
+**   modify this structure directly - it should only be used as shown above
+**   with the xPhraseFirst() and xPhraseNext() API methods (and by
+**   xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
+**   (i.e. if it is a contentless table), then this API always iterates
+**   through an empty set (all calls to xPhraseFirst() set iCol to -1).
+**
+** xPhraseNext()
+**   See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+**   This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+**   and xPhraseNext() APIs described above. The difference is that instead
+**   of iterating through all instances of a phrase in the current row, these
+**   APIs are used to iterate through the set of columns in the current row
+**   that contain one or more instances of a specified phrase. For example:
+**
+**       Fts5PhraseIter iter;
+**       int iCol;
+**       for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+**           iCol>=0;
+**           pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+**       ){
+**         // Column iCol contains at least one instance of phrase iPhrase
+**       }
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" option. If the FTS5 table is created with either 
+**   "detail=none" "content=" option (i.e. if it is a contentless table), 
+**   then this API always iterates through an empty set (all calls to 
+**   xPhraseFirstColumn() set iCol to -1).
+**
+**   The information accessed using this API and its companion
+**   xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+**   (or xInst/xInstCount). The chief advantage of this API is that it is
+**   significantly more efficient than those alternatives when used with
+**   "detail=column" tables.  
+**
+** xPhraseNextColumn()
+**   See xPhraseFirstColumn above.
+*/
+struct Fts5ExtensionApi {
+  int iVersion;                   /* Currently always set to 3 */
+
+  void *(*xUserData)(Fts5Context*);
+
+  int (*xColumnCount)(Fts5Context*);
+  int (*xRowCount)(Fts5Context*, sqlite3_int64 *pnRow);
+  int (*xColumnTotalSize)(Fts5Context*, int iCol, sqlite3_int64 *pnToken);
+
+  int (*xTokenize)(Fts5Context*, 
+    const char *pText, int nText, /* Text to tokenize */
+    void *pCtx,                   /* Context passed to xToken() */
+    int (*xToken)(void*, int, const char*, int, int, int)       /* Callback */
+  );
+
+  int (*xPhraseCount)(Fts5Context*);
+  int (*xPhraseSize)(Fts5Context*, int iPhrase);
+
+  int (*xInstCount)(Fts5Context*, int *pnInst);
+  int (*xInst)(Fts5Context*, int iIdx, int *piPhrase, int *piCol, int *piOff);
+
+  sqlite3_int64 (*xRowid)(Fts5Context*);
+  int (*xColumnText)(Fts5Context*, int iCol, const char **pz, int *pn);
+  int (*xColumnSize)(Fts5Context*, int iCol, int *pnToken);
+
+  int (*xQueryPhrase)(Fts5Context*, int iPhrase, void *pUserData,
+    int(*)(const Fts5ExtensionApi*,Fts5Context*,void*)
+  );
+  int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
+  void *(*xGetAuxdata)(Fts5Context*, int bClear);
+
+  int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+  void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+  int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+  void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
+};
+
+/* 
+** CUSTOM AUXILIARY FUNCTIONS
+*************************************************************************/
+
+/*************************************************************************
+** CUSTOM TOKENIZERS
+**
+** Applications may also register custom tokenizer types. A tokenizer 
+** is registered by providing fts5 with a populated instance of the 
+** following structure. All structure methods must be defined, setting
+** any member of the fts5_tokenizer struct to NULL leads to undefined
+** behaviour. The structure methods are expected to function as follows:
+**
+** xCreate:
+**   This function is used to allocate and inititalize a tokenizer instance.
+**   A tokenizer instance is required to actually tokenize text.
+**
+**   The first argument passed to this function is a copy of the (void*)
+**   pointer provided by the application when the fts5_tokenizer object
+**   was registered with FTS5 (the third argument to xCreateTokenizer()). 
+**   The second and third arguments are an array of nul-terminated strings
+**   containing the tokenizer arguments, if any, specified following the
+**   tokenizer name as part of the CREATE VIRTUAL TABLE statement used
+**   to create the FTS5 table.
+**
+**   The final argument is an output variable. If successful, (*ppOut) 
+**   should be set to point to the new tokenizer handle and SQLITE_OK
+**   returned. If an error occurs, some value other than SQLITE_OK should
+**   be returned. In this case, fts5 assumes that the final value of *ppOut 
+**   is undefined.
+**
+** xDelete:
+**   This function is invoked to delete a tokenizer handle previously
+**   allocated using xCreate(). Fts5 guarantees that this function will
+**   be invoked exactly once for each successful call to xCreate().
+**
+** xTokenize:
+**   This function is expected to tokenize the nText byte string indicated 
+**   by argument pText. pText may or may not be nul-terminated. The first
+**   argument passed to this function is a pointer to an Fts5Tokenizer object
+**   returned by an earlier call to xCreate().
+**
+**   The second argument indicates the reason that FTS5 is requesting
+**   tokenization of the supplied text. This is always one of the following
+**   four values:
+**
+**   <ul><li> <b>FTS5_TOKENIZE_DOCUMENT</b> - A document is being inserted into
+**            or removed from the FTS table. The tokenizer is being invoked to
+**            determine the set of tokens to add to (or delete from) the
+**            FTS index.
+**
+**       <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed 
+**            against the FTS index. The tokenizer is being called to tokenize 
+**            a bareword or quoted string specified as part of the query.
+**
+**       <li> <b>(FTS5_TOKENIZE_QUERY | FTS5_TOKENIZE_PREFIX)</b> - Same as
+**            FTS5_TOKENIZE_QUERY, except that the bareword or quoted string is
+**            followed by a "*" character, indicating that the last token
+**            returned by the tokenizer will be treated as a token prefix.
+**
+**       <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to 
+**            satisfy an fts5_api.xTokenize() request made by an auxiliary
+**            function. Or an fts5_api.xColumnSize() request made by the same
+**            on a columnsize=0 database.  
+**   </ul>
+**
+**   For each token in the input string, the supplied callback xToken() must
+**   be invoked. The first argument to it should be a copy of the pointer
+**   passed as the second argument to xTokenize(). The third and fourth
+**   arguments are a pointer to a buffer containing the token text, and the
+**   size of the token in bytes. The 4th and 5th arguments are the byte offsets
+**   of the first byte of and first byte immediately following the text from
+**   which the token is derived within the input.
+**
+**   The second argument passed to the xToken() callback ("tflags") should
+**   normally be set to 0. The exception is if the tokenizer supports 
+**   synonyms. In this case see the discussion below for details.
+**
+**   FTS5 assumes the xToken() callback is invoked for each token in the 
+**   order that they occur within the input text.
+**
+**   If an xToken() callback returns any value other than SQLITE_OK, then
+**   the tokenization should be abandoned and the xTokenize() method should
+**   immediately return a copy of the xToken() return value. Or, if the
+**   input buffer is exhausted, xTokenize() should return SQLITE_OK. Finally,
+**   if an error occurs with the xTokenize() implementation itself, it
+**   may abandon the tokenization and return any error code other than
+**   SQLITE_OK or SQLITE_DONE.
+**
+** SYNONYM SUPPORT
+**
+**   Custom tokenizers may also support synonyms. Consider a case in which a
+**   user wishes to query for a phrase such as "first place". Using the 
+**   built-in tokenizers, the FTS5 query 'first + place' will match instances
+**   of "first place" within the document set, but not alternative forms
+**   such as "1st place". In some applications, it would be better to match
+**   all instances of "first place" or "1st place" regardless of which form
+**   the user specified in the MATCH query text.
+**
+**   There are several ways to approach this in FTS5:
+**
+**   <ol><li> By mapping all synonyms to a single token. In this case, the 
+**            In the above example, this means that the tokenizer returns the
+**            same token for inputs "first" and "1st". Say that token is in
+**            fact "first", so that when the user inserts the document "I won
+**            1st place" entries are added to the index for tokens "i", "won",
+**            "first" and "place". If the user then queries for '1st + place',
+**            the tokenizer substitutes "first" for "1st" and the query works
+**            as expected.
+**
+**       <li> By adding multiple synonyms for a single term to the FTS index.
+**            In this case, when tokenizing query text, the tokenizer may 
+**            provide multiple synonyms for a single term within the document.
+**            FTS5 then queries the index for each synonym individually. For
+**            example, faced with the query:
+**
+**   <codeblock>
+**     ... MATCH 'first place'</codeblock>
+**
+**            the tokenizer offers both "1st" and "first" as synonyms for the
+**            first token in the MATCH query and FTS5 effectively runs a query 
+**            similar to:
+**
+**   <codeblock>
+**     ... MATCH '(first OR 1st) place'</codeblock>
+**
+**            except that, for the purposes of auxiliary functions, the query
+**            still appears to contain just two phrases - "(first OR 1st)" 
+**            being treated as a single phrase.
+**
+**       <li> By adding multiple synonyms for a single term to the FTS index.
+**            Using this method, when tokenizing document text, the tokenizer
+**            provides multiple synonyms for each token. So that when a 
+**            document such as "I won first place" is tokenized, entries are
+**            added to the FTS index for "i", "won", "first", "1st" and
+**            "place".
+**
+**            This way, even if the tokenizer does not provide synonyms
+**            when tokenizing query text (it should not - to do would be
+**            inefficient), it doesn't matter if the user queries for 
+**            'first + place' or '1st + place', as there are entires in the
+**            FTS index corresponding to both forms of the first token.
+**   </ol>
+**
+**   Whether it is parsing document or query text, any call to xToken that
+**   specifies a <i>tflags</i> argument with the FTS5_TOKEN_COLOCATED bit
+**   is considered to supply a synonym for the previous token. For example,
+**   when parsing the document "I won first place", a tokenizer that supports
+**   synonyms would call xToken() 5 times, as follows:
+**
+**   <codeblock>
+**       xToken(pCtx, 0, "i",                      1,  0,  1);
+**       xToken(pCtx, 0, "won",                    3,  2,  5);
+**       xToken(pCtx, 0, "first",                  5,  6, 11);
+**       xToken(pCtx, FTS5_TOKEN_COLOCATED, "1st", 3,  6, 11);
+**       xToken(pCtx, 0, "place",                  5, 12, 17);
+**</codeblock>
+**
+**   It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time
+**   xToken() is called. Multiple synonyms may be specified for a single token
+**   by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence. 
+**   There is no limit to the number of synonyms that may be provided for a
+**   single token.
+**
+**   In many cases, method (1) above is the best approach. It does not add 
+**   extra data to the FTS index or require FTS5 to query for multiple terms,
+**   so it is efficient in terms of disk space and query speed. However, it
+**   does not support prefix queries very well. If, as suggested above, the
+**   token "first" is subsituted for "1st" by the tokenizer, then the query:
+**
+**   <codeblock>
+**     ... MATCH '1s*'</codeblock>
+**
+**   will not match documents that contain the token "1st" (as the tokenizer
+**   will probably not map "1s" to any prefix of "first").
+**
+**   For full prefix support, method (3) may be preferred. In this case, 
+**   because the index contains entries for both "first" and "1st", prefix
+**   queries such as 'fi*' or '1s*' will match correctly. However, because
+**   extra entries are added to the FTS index, this method uses more space
+**   within the database.
+**
+**   Method (2) offers a midpoint between (1) and (3). Using this method,
+**   a query such as '1s*' will match documents that contain the literal 
+**   token "1st", but not "first" (assuming the tokenizer is not able to
+**   provide synonyms for prefixes). However, a non-prefix query like '1st'
+**   will match against "1st" and "first". This method does not require
+**   extra disk space, as no extra entries are added to the FTS index. 
+**   On the other hand, it may require more CPU cycles to run MATCH queries,
+**   as separate queries of the FTS index are required for each synonym.
+**
+**   When using methods (2) or (3), it is important that the tokenizer only
+**   provide synonyms when tokenizing document text (method (2)) or query
+**   text (method (3)), not both. Doing so will not cause any errors, but is
+**   inefficient.
+*/
+typedef struct Fts5Tokenizer Fts5Tokenizer;
+typedef struct fts5_tokenizer fts5_tokenizer;
+struct fts5_tokenizer {
+  int (*xCreate)(void*, const char **azArg, int nArg, Fts5Tokenizer **ppOut);
+  void (*xDelete)(Fts5Tokenizer*);
+  int (*xTokenize)(Fts5Tokenizer*, 
+      void *pCtx,
+      int flags,            /* Mask of FTS5_TOKENIZE_* flags */
+      const char *pText, int nText, 
+      int (*xToken)(
+        void *pCtx,         /* Copy of 2nd argument to xTokenize() */
+        int tflags,         /* Mask of FTS5_TOKEN_* flags */
+        const char *pToken, /* Pointer to buffer containing token */
+        int nToken,         /* Size of token in bytes */
+        int iStart,         /* Byte offset of token within input text */
+        int iEnd            /* Byte offset of end of token within input text */
+      )
+  );
+};
+
+/* Flags that may be passed as the third argument to xTokenize() */
+#define FTS5_TOKENIZE_QUERY     0x0001
+#define FTS5_TOKENIZE_PREFIX    0x0002
+#define FTS5_TOKENIZE_DOCUMENT  0x0004
+#define FTS5_TOKENIZE_AUX       0x0008
+
+/* Flags that may be passed by the tokenizer implementation back to FTS5
+** as the third argument to the supplied xToken callback. */
+#define FTS5_TOKEN_COLOCATED    0x0001      /* Same position as prev. token */
+
+/*
+** END OF CUSTOM TOKENIZERS
+*************************************************************************/
+
+/*************************************************************************
+** FTS5 EXTENSION REGISTRATION API
+*/
+typedef struct fts5_api fts5_api;
+struct fts5_api {
+  int iVersion;                   /* Currently always set to 2 */
+
+  /* Create a new tokenizer */
+  int (*xCreateTokenizer)(
+    fts5_api *pApi,
+    const char *zName,
+    void *pContext,
+    fts5_tokenizer *pTokenizer,
+    void (*xDestroy)(void*)
+  );
+
+  /* Find an existing tokenizer */
+  int (*xFindTokenizer)(
+    fts5_api *pApi,
+    const char *zName,
+    void **ppContext,
+    fts5_tokenizer *pTokenizer
+  );
+
+  /* Create a new auxiliary function */
+  int (*xCreateFunction)(
+    fts5_api *pApi,
+    const char *zName,
+    void *pContext,
+    fts5_extension_function xFunction,
+    void (*xDestroy)(void*)
+  );
+};
+
+/*
+** END OF REGISTRATION API
+*************************************************************************/
+
+#ifdef __cplusplus
+}  /* end of the 'extern "C"' block */
+#endif
+
+#endif /* _FTS5_H */
+
+