poolparty 1.2.2 → 1.3.1

data/lib/poolparty/templates/apache2/debian.conf.erb

@@ -1,675 +0,0 @@
-# 000-debian.conf -- this reproduces the default debian configuration
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs-2.1/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
-# with ServerRoot set to "" will be interpreted by the
-# server as "//var/log/apache2/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation (available
-# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot "/etc/apache2"
-
-#
-# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#
-#<IfModule !mpm_winnt.c>
-#<IfModule !mpm_netware.c>
-LockFile /var/lock/apache2/accept.lock
-#</IfModule>
-#</IfModule>
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/apache2.pid
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-##
-## Server-Pool Size Regulation (MPM specific)
-## 
-
-# prefork MPM
-# StartServers: number of server processes to start
-# MinSpareServers: minimum number of server processes which are kept spare
-# MaxSpareServers: maximum number of server processes which are kept spare
-# MaxClients: maximum number of server processes allowed to start
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_prefork_module>
-    StartServers          5
-    MinSpareServers       5
-    MaxSpareServers      10
-    MaxClients          150
-    MaxRequestsPerChild   0
-</IfModule>
-
-# worker MPM
-# StartServers: initial number of server processes to start
-# MaxClients: maximum number of simultaneous client connections
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# ThreadsPerChild: constant number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule mpm_worker_module>
-    StartServers          2
-    MaxClients          150
-    MinSpareThreads      25
-    MaxSpareThreads      75 
-    ThreadsPerChild      25
-    MaxRequestsPerChild   0
-</IfModule>
-
-User www-data
-Group www-data
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for additional configuration directives.  See also the AllowOverride
-# directive.
-#
-
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being 
-# viewed by Web clients. 
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-</Files>
-
-TypesConfig /etc/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog /var/log/apache2/error.log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-# the apache2 puppet config already does this stuff:
-## Include module configuration:
-#Include /etc/apache2/mods-enabled/*.load
-#Include /etc/apache2/mods-enabled/*.conf
-#
-## Include all the user configurations:
-#Include /etc/apache2/httpd.conf
-#
-## Include ports listing
-#Include /etc/apache2/ports.conf
-#
-## Include generic snippets of statements
-#Include /etc/apache2/conf.d/
-
-# the apache2 puppet config removes ports.conf, which would have been 
-# included above, and which contains (by default) the following line:
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#
-ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory 
-# listings, mod_status and mod_info output etc., but not CGI generated 
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature On
-
-<IfModule alias_module>
-    #
-    # Aliases: Add here as many aliases as you need (with no limit). The format is 
-    # Alias fakename realname
-    #
-    # Note that if you include a trailing / on fakename then the server will
-    # require it to be present in the URL.  So "/icons" isn't aliased in this
-    # example, only "/icons/".  If the fakename is slash-terminated, then the 
-    # realname must also be slash terminated, and if the fakename omits the 
-    # trailing slash, the realname must also omit it.
-    #
-    # We include the /icons/ alias for FancyIndexed directory listings.  If
-    # you do not use FancyIndexing, you may comment this out.
-    #
-    Alias /icons/ "/usr/share/apache2/icons/"
-
-    <Directory "/usr/share/apache2/icons">
-        Options Indexes MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-</IfModule>
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
-    #
-    # IndexOptions: Controls the appearance of server-generated directory
-    # listings.
-    #
-    IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=*
-
-    #
-    # AddIcon* directives tell the server which icon to show for different
-    # files or filename extensions.  These are only displayed for
-    # FancyIndexed directories.
-    #
-    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-    AddIconByType (TXT,/icons/text.gif) text/*
-    AddIconByType (IMG,/icons/image2.gif) image/*
-    AddIconByType (SND,/icons/sound2.gif) audio/*
-    AddIconByType (VID,/icons/movie.gif) video/*
-
-    AddIcon /icons/binary.gif .bin .exe
-    AddIcon /icons/binhex.gif .hqx
-    AddIcon /icons/tar.gif .tar
-    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-    AddIcon /icons/a.gif .ps .ai .eps
-    AddIcon /icons/layout.gif .html .shtml .htm .pdf
-    AddIcon /icons/text.gif .txt
-    AddIcon /icons/c.gif .c
-    AddIcon /icons/p.gif .pl .py
-    AddIcon /icons/f.gif .for
-    AddIcon /icons/dvi.gif .dvi
-    AddIcon /icons/uuencoded.gif .uu
-    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-    AddIcon /icons/tex.gif .tex
-    AddIcon /icons/bomb.gif core
-
-    AddIcon /icons/back.gif ..
-    AddIcon /icons/hand.right.gif README
-    AddIcon /icons/folder.gif ^^DIRECTORY^^
-    AddIcon /icons/blank.gif ^^BLANKICON^^
-
-    #
-    # DefaultIcon is which icon to show for files which do not have an icon
-    # explicitly set.
-    #
-    DefaultIcon /icons/unknown.gif
-
-    #
-    # AddDescription allows you to place a short description after a file in
-    # server-generated indexes.  These are only displayed for FancyIndexed
-    # directories.
-    # Format: AddDescription "description" filename
-    #
-    #AddDescription "GZIP compressed document" .gz
-    #AddDescription "tar archive" .tar
-    #AddDescription "GZIP compressed tar archive" .tgz
-
-    #
-    # ReadmeName is the name of the README file the server will look for by
-    # default, and append to directory listings.
-    #
-    # HeaderName is the name of a file which should be prepended to
-    # directory indexes. 
-    ReadmeName README.html
-    HeaderName HEADER.html
-
-    #
-    # IndexIgnore is a set of filenames which directory indexing should ignore
-    # and not include in the listing.  Shell-style wildcarding is permitted.
-    #
-    IndexIgnore .??* *~ *# RCS CVS *,v *,t 
-</IfModule>
-
-<IfModule mod_mime.c>
-
-    #
-    # AddType allows you to add to or override the MIME configuration
-    # file mime.types for specific file types.
-    #
-    #AddType application/x-gzip .tgz
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    # Despite the name similarity, the following Add* directives have
-    # nothing to do with the FancyIndexing customization directives above.
-    #
-    #AddEncoding x-compress .Z
-    #AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    AddType application/x-compress .Z
-    AddType application/x-gzip .gz .tgz
-
-    #
-    # DefaultLanguage and AddLanguage allows you to specify the language of 
-    # a document. You can then use content negotiation to give a browser a 
-    # file in a language the user can understand.
-    #
-    # Specify a default language. This means that all data
-    # going out without a specific language tag (see below) will 
-    # be marked with this one. You probably do NOT want to set
-    # this unless you are sure it is correct for all cases.
-    #
-    # * It is generally better to not mark a page as 
-    # * being a certain language than marking it with the wrong
-    # * language!
-    #
-    # DefaultLanguage nl
-    #
-    # Note 1: The suffix does not have to be the same as the language
-    # keyword --- those with documents in Polish (whose net-standard
-    # language code is pl) may wish to use "AddLanguage pl .po" to
-    # avoid the ambiguity with the common suffix for perl scripts.
-    #
-    # Note 2: The example entries below illustrate that in some cases 
-    # the two character 'Language' abbreviation is not identical to 
-    # the two character 'Country' code for its country,
-    # E.g. 'Danmark/dk' versus 'Danish/da'.
-    #
-    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
-    # specifier. There is 'work in progress' to fix this and get
-    # the reference data for rfc1766 cleaned up.
-    #
-    # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
-    # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
-    # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
-    # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
-    # Norwegian (no) - Polish (pl) - Portugese (pt)
-    # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
-    # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
-    #
-    AddLanguage ca .ca
-    AddLanguage cs .cz .cs
-    AddLanguage da .dk
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage en .en
-    AddLanguage eo .eo
-    AddLanguage es .es
-    AddLanguage et .et
-    AddLanguage fr .fr
-    AddLanguage he .he
-    AddLanguage hr .hr
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddLanguage ko .ko
-    AddLanguage ltz .ltz
-    AddLanguage nl .nl
-    AddLanguage nn .nn
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddLanguage pt .pt
-    AddLanguage pt-BR .pt-br
-    AddLanguage ru .ru
-    AddLanguage sv .sv
-    AddLanguage zh-CN .zh-cn
-    AddLanguage zh-TW .zh-tw
-</IfModule>
-
-<IfModule mod_negotiation.c>
-    #
-    # LanguagePriority allows you to give precedence to some languages
-    # in case of a tie during content negotiation.
-    #
-    # Just list the languages in decreasing order of preference. We have
-    # more or less alphabetized them here. You probably want to change this.
-    #
-    LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
-
-    #
-    # ForceLanguagePriority allows you to serve a result page rather than
-    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
-    # [in case no accepted languages matched the available variants]
-    #
-    ForceLanguagePriority Prefer Fallback
-
-</IfModule>
-
-<IfModule mod_mime.c>
-    #
-    # Specify a default charset for all pages sent out. This is
-    # always a good idea and opens the door for future internationalisation
-    # of your web site, should you ever want it. Specifying it as
-    # a default does little harm; as the standard dictates that a page
-    # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
-    # are merely stating the obvious. There are also some security
-    # reasons in browsers, related to javascript and URL parsing
-    # which encourage you to always set a default char set.
-    #
-    #AddDefaultCharset ISO-8859-1
-
-    #
-    # Commonly used filename extensions to character sets. You probably
-    # want to avoid clashes with the language extensions, unless you
-    # are good at carefully testing your setup after each change.
-    # See http://www.iana.org/assignments/character-sets for the
-    # official list of charset names and their respective RFCs.
-    #
-    AddCharset us-ascii    .ascii .us-ascii
-    AddCharset ISO-8859-1  .iso8859-1  .latin1
-    AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
-    AddCharset ISO-8859-3  .iso8859-3  .latin3
-    AddCharset ISO-8859-4  .iso8859-4  .latin4
-    AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
-    AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
-    AddCharset ISO-8859-7  .iso8859-7  .grk .greek
-    AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
-    AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
-    AddCharset ISO-8859-10  .iso8859-10  .latin6
-    AddCharset ISO-8859-13  .iso8859-13
-    AddCharset ISO-8859-14  .iso8859-14  .latin8
-    AddCharset ISO-8859-15  .iso8859-15  .latin9
-    AddCharset ISO-8859-16  .iso8859-16  .latin10
-    AddCharset ISO-2022-JP .iso2022-jp .jis
-    AddCharset ISO-2022-KR .iso2022-kr .kis
-    AddCharset ISO-2022-CN .iso2022-cn .cis
-    AddCharset Big5        .Big5       .big5 .b5
-    AddCharset cn-Big5     .cn-big5
-    # For russian, more than one charset is used (depends on client, mostly):
-    AddCharset WINDOWS-1251 .cp-1251   .win-1251
-    AddCharset CP866       .cp866
-    AddCharset KOI8      .koi8
-    AddCharset KOI8-E      .koi8-e
-    AddCharset KOI8-r      .koi8-r .koi8-ru
-    AddCharset KOI8-U      .koi8-u
-    AddCharset KOI8-ru     .koi8-uk .ua
-    AddCharset ISO-10646-UCS-2 .ucs2
-    AddCharset ISO-10646-UCS-4 .ucs4
-    AddCharset UTF-7       .utf7
-    AddCharset UTF-8       .utf8
-    AddCharset UTF-16      .utf16
-    AddCharset UTF-16BE    .utf16be
-    AddCharset UTF-16LE    .utf16le
-    AddCharset UTF-32      .utf32
-    AddCharset UTF-32BE    .utf32be
-    AddCharset UTF-32LE    .utf32le
-    AddCharset euc-cn      .euc-cn
-    AddCharset euc-gb      .euc-gb
-    AddCharset euc-jp      .euc-jp
-    AddCharset euc-kr      .euc-kr
-    #Not sure how euc-tw got in - IANA doesn't list it???
-    AddCharset EUC-TW      .euc-tw
-    AddCharset gb2312      .gb2312 .gb
-    AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
-    AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
-    AddCharset shift_jis   .shift_jis .sjis
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers":
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action directive (see below)
-    #
-    # To use CGI scripts outside of ScriptAliased directories:
-    # (You will also need to add "ExecCGI" to the "Options" directive.)
-    #
-    #AddHandler cgi-script .cgi
-
-    #
-    # For files that include their own HTTP headers:
-    #
-    #AddHandler send-as-is asis
-
-    #
-    # For server-parsed imagemap files:
-    #
-    #AddHandler imap-file map
-
-    #
-    # For type maps (negotiated resources):
-    # (This is enabled by default to allow the Apache "It Worked" page
-    #  to be distributed in multiple languages.)
-    #
-    AddHandler type-map var
-
-    #
-    # Filters allow you to process content before it is sent to the client.
-    #
-    # To parse .shtml files for server-side includes (SSI):
-    # (You will also need to add "Includes" to the "Options" directive.)
-    #
-    AddType text/html .shtml
-    AddOutputFilter INCLUDES .shtml
-</IfModule>
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# Putting this all together, we can internationalize error responses.
-#
-# We use Alias to redirect any /error/HTTP_<error>.html.var response to
-# our collection of by-error message multi-language collections.  We use 
-# includes to substitute the appropriate text.
-#
-# You can modify the messages' appearance without changing any of the
-# default HTTP_<error>.html.var files by adding the line:
-#
-#   Alias /error/include/ "/your/include/path/"
-#
-# which allows you to create your own set of files by starting with the
-# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
-# even on a per-VirtualHost basis.  The default include files will display
-# your Apache version number and your ServerAdmin email address regardless
-# of the setting of ServerSignature.
-#
-# The internationalized error documents require mod_alias, mod_include
-# and mod_negotiation.  To activate them, uncomment the following 30 lines.
-
-#    Alias /error/ "/usr/share/apache2/error/"
-#
-#    <Directory "/usr/share/apache2/error">
-#        AllowOverride None
-#        Options IncludesNoExec
-#        AddOutputFilter Includes html
-#        AddHandler type-map var
-#        Order allow,deny
-#        Allow from all
-#        LanguagePriority en cs de es fr it nl sv pt-br ro
-#        ForceLanguagePriority Prefer Fallback
-#    </Directory>
-#
-#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
-#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
-#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
-#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
-#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
-#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
-#    ErrorDocument 410 /error/HTTP_GONE.html.var
-#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
-#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
-#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
-#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
-#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
-#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
-#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
-#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
-#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
-#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
-
-<IfModule mod_setenvif.c>
-    #
-    # The following directives modify normal HTTP response behavior to
-    # handle known problems with browser implementations.
-    #
-    BrowserMatch "Mozilla/2" nokeepalive
-    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-    BrowserMatch "RealPlayer 4\.0" force-response-1.0
-    BrowserMatch "Java/1\.0" force-response-1.0
-    BrowserMatch "JDK/1\.0" force-response-1.0
-
-    #
-    # The following directive disables redirects on non-GET requests for
-    # a directory that does not include the trailing slash.  This fixes a 
-    # problem with Microsoft WebFolders which does not appropriately handle 
-    # redirects for folders with DAV methods.
-    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
-    #
-    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
-    BrowserMatch "MS FrontPage" redirect-carefully
-    BrowserMatch "^WebDrive" redirect-carefully
-    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
-    BrowserMatch "^gnome-vfs/1.0" redirect-carefully
-    BrowserMatch "^XML Spy" redirect-carefully
-    BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
-</IfModule>
-
-#<IfModule mod_status.c>
-    #
-    # Allow server status reports generated by mod_status,
-    # with the URL of http://servername/server-status
-    # Change the ".example.com" to match your domain to enable.
-    #
-    #<Location /server-status>
-    #    SetHandler server-status
-    #    Order deny,allow
-    #    Deny from all
-    #    Allow from .example.com
-    #</Location>
-#</IfModule>
-
-#<IfModule mod_info.c>
-    #
-    # Allow remote server configuration reports, with the URL of
-    #  http://servername/server-info (requires that mod_info.c be loaded).
-    # Change the ".example.com" to match your domain to enable.
-    #
-    #<Location /server-info>
-    #    SetHandler server-info
-    #    Order deny,allow
-    #    Deny from all
-    #    Allow from .example.com
-    #</Location>
-#</IfModule>
-
-# the puppet apache2 module does this already:
-## Include the virtual host configurations:
-#Include /etc/apache2/sites-enabled/