pluralkit-api 1.0.0

data/spec/configuration_spec.rb

@@ -0,0 +1,42 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+
+describe PluralKitAPI::Configuration do
+  let(:config) { PluralKitAPI::Configuration.default }
+
+  before(:each) do
+    # uncomment below to setup host and base_path
+    # require 'URI'
+    # uri = URI.parse("https://api.pluralkit.me/v1")
+    # PluralKitAPI.configure do |c|
+    #   c.host = uri.host
+    #   c.base_path = uri.path
+    # end
+  end
+
+  describe '#base_url' do
+    it 'should have the default value' do
+      # uncomment below to test default value of the base path
+      # expect(config.base_url).to eq("https://api.pluralkit.me/v1")
+    end
+
+    it 'should remove trailing slashes' do
+      [nil, '', '/', '//'].each do |base_path|
+        config.base_path = base_path
+        # uncomment below to test trailing slashes
+        # expect(config.base_url).to eq("https://api.pluralkit.me/v1")
+      end
+    end
+  end
+end

data/spec/models/full_switch_spec.rb

@@ -0,0 +1,40 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::FullSwitch
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::FullSwitch do
+  let(:instance) { PluralKitAPI::FullSwitch.new }
+
+  describe 'test an instance of FullSwitch' do
+    it 'should create an instance of FullSwitch' do
+      expect(instance).to be_instance_of(PluralKitAPI::FullSwitch)
+    end
+  end
+  describe 'test attribute "timestamp"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "members"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/member_spec.rb

@@ -0,0 +1,154 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::Member
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::Member do
+  let(:instance) { PluralKitAPI::Member.new }
+
+  describe 'test an instance of Member' do
+    it 'should create an instance of Member' do
+      expect(instance).to be_instance_of(PluralKitAPI::Member)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "display_name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "color"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "birthday"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pronouns"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "avatar_url"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "visibility"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "description_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "avatar_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pronouns_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "birthday_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "metadata_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "proxy_tags"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "prefix"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "suffix"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "keep_proxy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "created"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/message_spec.rb

@@ -0,0 +1,70 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::Message
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::Message do
+  let(:instance) { PluralKitAPI::Message.new }
+
+  describe 'test an instance of Message' do
+    it 'should create an instance of Message' do
+      expect(instance).to be_instance_of(PluralKitAPI::Message)
+    end
+  end
+  describe 'test attribute "timestamp"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "original"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "sender"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "channel"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "system"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "member"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/privacy_setting_spec.rb

@@ -0,0 +1,28 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::PrivacySetting
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::PrivacySetting do
+  let(:instance) { PluralKitAPI::PrivacySetting.new }
+
+  describe 'test an instance of PrivacySetting' do
+    it 'should create an instance of PrivacySetting' do
+      expect(instance).to be_instance_of(PluralKitAPI::PrivacySetting)
+    end
+  end
+end

data/spec/models/proxy_tag_spec.rb

@@ -0,0 +1,40 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::ProxyTag
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::ProxyTag do
+  let(:instance) { PluralKitAPI::ProxyTag.new }
+
+  describe 'test an instance of ProxyTag' do
+    it 'should create an instance of ProxyTag' do
+      expect(instance).to be_instance_of(PluralKitAPI::ProxyTag)
+    end
+  end
+  describe 'test attribute "prefix"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "suffix"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/switch_spec.rb

@@ -0,0 +1,40 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::Switch
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::Switch do
+  let(:instance) { PluralKitAPI::Switch.new }
+
+  describe 'test an instance of Switch' do
+    it 'should create an instance of Switch' do
+      expect(instance).to be_instance_of(PluralKitAPI::Switch)
+    end
+  end
+  describe 'test attribute "timestamp"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "members"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/system_spec.rb

@@ -0,0 +1,94 @@
+=begin
+#PluralKit
+
+#This is the API for [PluralKit](https://pluralkit.me/)! :)  The API itself is stable, but this document (the OpenAPI description) is still subject to change, and may be updated, corrected or restructured in the future (as long as it's still coherent with the real API).  # Authentication Authentication is handled using a \"system token\". At the moment, the only way to obtain a system token is to use the `pk;token` command through the Discord bot.  This will generate an opaque string you must pass as the `Authorization` header to API requests. Many API endpoints are available anonymously, but most of them will hide information from  unauthenticated requests to align with the relevant privacy settings.  # Errors Errors are just returned as HTTP response codes. Most error responses include a human-readable error message as the body, but this should not be relied on. Just read the response codes :)  # OpenAPI version history - **1.1**: Granular member privacy - **1.0**: (initial definition version) 
+
+The version of the OpenAPI document: 1.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for PluralKitAPI::System
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe PluralKitAPI::System do
+  let(:instance) { PluralKitAPI::System.new }
+
+  describe 'test an instance of System' do
+    it 'should create an instance of System' do
+      expect(instance).to be_instance_of(PluralKitAPI::System)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tag"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "avatar_url"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tz"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "created"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "description_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "member_list_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "front_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "front_history_privacy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end