plaid 19.0.0 → 19.1.0

data/lib/plaid/models/link_token_create_request.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1
@@ -36,9 +36,12 @@ module Plaid
     # List of Plaid product(s) you wish to use. If launching Link in update mode, should be omitted (unless you are using update mode to add Income or Assets to an Item); required otherwise.  `balance` is *not* a valid value, the Balance product does not require explicit initialization and will automatically be initialized when any other product is initialized.  The products specified here will determine which institutions will be available to your users in Link. Only institutions that support *all* requested products can be selected; a if a user attempts to select an institution that does not support a listed product, a \"Connectivity not supported\" error message will appear in Link. To maximize the number of institutions available, initialize Link with the minimal product set required for your use case. Additional products can be added after Link initialization by calling the relevant endpoints. For details and exceptions, see [Choosing when to initialize products](https://plaid.com/docs/link/initializing-products/).  Note that, unless you have opted to disable Instant Match support, institutions that support Instant Match will also be shown in Link if `auth` is specified as a product, even though these institutions do not contain `auth` in their product array.  In Production, you will be billed for each product that you specify when initializing Link. Note that a product cannot be removed from an Item once the Item has been initialized with that product. To stop billing on an Item for subscription-based products, such as Liabilities, Investments, and Transactions, remove the Item via `/item/remove`.
     attr_accessor :products
 
-    # (Beta) This field has no effect unless you are participating in the Product Scope Transparency beta program. List of additional Plaid product(s) you wish to collect consent for. These products will not be billed until you start using them by calling the relevant endpoints.  `balance` is *not* a valid value, the Balance product does not require explicit initialization and will automatically have consent collected.  Institutions that do not support these products will still be shown in Link
+    # (Beta) This field has no effect unless you are participating in the [Data Transparency](https://plaid.com/docs/link/data-transparency-messaging-migration-guide) beta program. List of additional Plaid product(s) you wish to collect consent for. These products will not be billed until you start using them by calling the relevant endpoints.  `balance` is *not* a valid value, the Balance product does not require explicit initialization and will automatically have consent collected.  Institutions that do not support these products will still be shown in Link
     attr_accessor :additional_consented_products
 
+    # List of Plaid product(s) you wish to use only if the institution and accounts selected by the user support the product. Institutions that do not support these products will still be shown in Link. The products will only be extracted if the user selects an institution that supports them.  If the institution and accounts selected by the user support a product specified in this field, but Plaid is unable to successfully fetch data for the product (for example, because the institution uses an OAuth connection and the end user does not grant the required product permission(s) in the institution's OAuth flow) the error will be presented to the user in Link and they will be prompted to fix the error.  There should be no overlap between `products` and `required_if_supported_products`. The `products` array must have at least one product. Valid `required_if_supported_products` are:  `transactions`, `auth`, `identity`, `investments`, `liabilities`  Example: `['identity']`  In Production, you will only be billed for required if supported products when they are supported and added to the Item. To see the full list of products added to the item during Link, call `/item/get`.
+    attr_accessor :required_if_supported_products
+
     # The destination URL to which any webhooks should be sent. Note that webhooks for Payment Initiation (e-wallet transactions only), Transfer, Bank Transfer (including Auth micro-deposit notification webhooks) and Identity Verification are configured via the Dashboard instead.
     attr_accessor :webhook
 
@@ -84,6 +87,8 @@ module Plaid
 
     attr_accessor :investments
 
+    attr_accessor :investments_auth
+
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
@@ -95,6 +100,7 @@ module Plaid
         :'user' => :'user',
         :'products' => :'products',
         :'additional_consented_products' => :'additional_consented_products',
+        :'required_if_supported_products' => :'required_if_supported_products',
         :'webhook' => :'webhook',
         :'access_token' => :'access_token',
         :'link_customization_name' => :'link_customization_name',
@@ -113,7 +119,8 @@ module Plaid
         :'update' => :'update',
         :'identity_verification' => :'identity_verification',
         :'user_token' => :'user_token',
-        :'investments' => :'investments'
+        :'investments' => :'investments',
+        :'investments_auth' => :'investments_auth'
       }
     end
 
@@ -133,6 +140,7 @@ module Plaid
         :'user' => :'LinkTokenCreateRequestUser',
         :'products' => :'Array<Products>',
         :'additional_consented_products' => :'Array<Products>',
+        :'required_if_supported_products' => :'Array<Products>',
         :'webhook' => :'String',
         :'access_token' => :'String',
         :'link_customization_name' => :'String',
@@ -151,7 +159,8 @@ module Plaid
         :'update' => :'LinkTokenCreateRequestUpdate',
         :'identity_verification' => :'LinkTokenCreateRequestIdentityVerification',
         :'user_token' => :'String',
-        :'investments' => :'LinkTokenInvestments'
+        :'investments' => :'LinkTokenInvestments',
+        :'investments_auth' => :'LinkTokenInvestmentsAuth'
       }
     end
 
@@ -214,6 +223,12 @@ module Plaid
         end
       end
 
+      if attributes.key?(:'required_if_supported_products')
+        if (value = attributes[:'required_if_supported_products']).is_a?(Array)
+          self.required_if_supported_products = value
+        end
+      end
+
       if attributes.key?(:'webhook')
         self.webhook = attributes[:'webhook']
       end
@@ -289,6 +304,10 @@ module Plaid
       if attributes.key?(:'investments')
         self.investments = attributes[:'investments']
       end
+
+      if attributes.key?(:'investments_auth')
+        self.investments_auth = attributes[:'investments_auth']
+      end
     end
 
     # Show invalid properties with the reasons. Usually used together with valid?
@@ -358,6 +377,7 @@ module Plaid
           user == o.user &&
           products == o.products &&
           additional_consented_products == o.additional_consented_products &&
+          required_if_supported_products == o.required_if_supported_products &&
           webhook == o.webhook &&
           access_token == o.access_token &&
           link_customization_name == o.link_customization_name &&
@@ -376,7 +396,8 @@ module Plaid
           update == o.update &&
           identity_verification == o.identity_verification &&
           user_token == o.user_token &&
-          investments == o.investments
+          investments == o.investments &&
+          investments_auth == o.investments_auth
     end
 
     # @see the `==` method
@@ -388,7 +409,7 @@ module Plaid
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [client_id, secret, client_name, language, country_codes, user, products, additional_consented_products, webhook, access_token, link_customization_name, redirect_uri, android_package_name, institution_data, account_filters, eu_config, institution_id, payment_initiation, deposit_switch, employment, income_verification, auth, transfer, update, identity_verification, user_token, investments].hash
+      [client_id, secret, client_name, language, country_codes, user, products, additional_consented_products, required_if_supported_products, webhook, access_token, link_customization_name, redirect_uri, android_package_name, institution_data, account_filters, eu_config, institution_id, payment_initiation, deposit_switch, employment, income_verification, auth, transfer, update, identity_verification, user_token, investments, investments_auth].hash
     end
 
     # Builds the object from hash

data/lib/plaid/models/link_token_create_request_account_subtypes.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_auth.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1
@@ -28,6 +28,9 @@ module Plaid
     # Specifies whether the Link session is enabled for the Same Day Micro-deposits flow.
     attr_accessor :same_day_microdeposits_enabled
 
+    # Specifies what type of Reroute to Credentials pane should be used in the Link session for the Same Day Micro-deposits flow.
+    attr_accessor :reroute_to_credentials
+
     # This field has been deprecated in favor of `auth_type_select_enabled`.
     attr_accessor :flow_type
 
@@ -60,6 +63,7 @@ module Plaid
         :'automated_microdeposits_enabled' => :'automated_microdeposits_enabled',
         :'instant_match_enabled' => :'instant_match_enabled',
         :'same_day_microdeposits_enabled' => :'same_day_microdeposits_enabled',
+        :'reroute_to_credentials' => :'reroute_to_credentials',
         :'flow_type' => :'flow_type'
       }
     end
@@ -76,6 +80,7 @@ module Plaid
         :'automated_microdeposits_enabled' => :'Boolean',
         :'instant_match_enabled' => :'Boolean',
         :'same_day_microdeposits_enabled' => :'Boolean',
+        :'reroute_to_credentials' => :'String',
         :'flow_type' => :'String'
       }
     end
@@ -119,6 +124,10 @@ module Plaid
         self.same_day_microdeposits_enabled = attributes[:'same_day_microdeposits_enabled']
       end
 
+      if attributes.key?(:'reroute_to_credentials')
+        self.reroute_to_credentials = attributes[:'reroute_to_credentials']
+      end
+
       if attributes.key?(:'flow_type')
         self.flow_type = attributes[:'flow_type']
       end
@@ -134,11 +143,23 @@ module Plaid
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
+      reroute_to_credentials_validator = EnumAttributeValidator.new('String', ["OFF", "OPTIONAL", "FORCED"])
+      return false unless reroute_to_credentials_validator.valid?(@reroute_to_credentials)
       flow_type_validator = EnumAttributeValidator.new('String', ["FLEXIBLE_AUTH"])
       return false unless flow_type_validator.valid?(@flow_type)
       true
     end
 
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] reroute_to_credentials Object to be assigned
+    def reroute_to_credentials=(reroute_to_credentials)
+      validator = EnumAttributeValidator.new('String', ["OFF", "OPTIONAL", "FORCED"])
+      unless validator.valid?(reroute_to_credentials)
+        fail ArgumentError, "invalid value for \"reroute_to_credentials\", must be one of #{validator.allowable_values}."
+      end
+      @reroute_to_credentials = reroute_to_credentials
+    end
+
     # Custom attribute writer method checking allowed values (enum).
     # @param [Object] flow_type Object to be assigned
     def flow_type=(flow_type)
@@ -158,6 +179,7 @@ module Plaid
           automated_microdeposits_enabled == o.automated_microdeposits_enabled &&
           instant_match_enabled == o.instant_match_enabled &&
           same_day_microdeposits_enabled == o.same_day_microdeposits_enabled &&
+          reroute_to_credentials == o.reroute_to_credentials &&
           flow_type == o.flow_type
     end
 
@@ -170,7 +192,7 @@ module Plaid
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [auth_type_select_enabled, automated_microdeposits_enabled, instant_match_enabled, same_day_microdeposits_enabled, flow_type].hash
+      [auth_type_select_enabled, automated_microdeposits_enabled, instant_match_enabled, same_day_microdeposits_enabled, reroute_to_credentials, flow_type].hash
     end
 
     # Builds the object from hash

data/lib/plaid/models/link_token_create_request_deposit_switch.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_employment.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_employment_bank_income.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_identity_verification.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_income_verification.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_income_verification_bank_income.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_income_verification_payroll_income.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_payment_initiation.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_transfer.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_update.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_user.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_request_user_stated_income_source.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_create_response.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_eu_config.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_get_metadata_response.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_get_request.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_get_response.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_investments.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1

data/lib/plaid/models/link_token_investments_auth.rb

@@ -0,0 +1,236 @@
+=begin
+#The Plaid API
+
+#The Plaid REST API. Please see https://plaid.com/docs/api for more details.
+
+The version of the OpenAPI document: 2020-09-14_1.379.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.1.1
+
+=end
+
+require 'date'
+require 'time'
+
+module Plaid
+  # Configuration parameters for the Investments Auth Product
+  class LinkTokenInvestmentsAuth
+    # If `true`, show institutions that use the manual entry fallback flow.
+    attr_accessor :manual_entry_enabled
+
+    # If `true`, show institutions that use the masked number match fallback flow.
+    attr_accessor :masked_number_match_enabled
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'manual_entry_enabled' => :'manual_entry_enabled',
+        :'masked_number_match_enabled' => :'masked_number_match_enabled'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'manual_entry_enabled' => :'Boolean',
+        :'masked_number_match_enabled' => :'Boolean'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'manual_entry_enabled',
+        :'masked_number_match_enabled'
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Plaid::LinkTokenInvestmentsAuth` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Plaid::LinkTokenInvestmentsAuth`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'manual_entry_enabled')
+        self.manual_entry_enabled = attributes[:'manual_entry_enabled']
+      else
+        self.manual_entry_enabled = false
+      end
+
+      if attributes.key?(:'masked_number_match_enabled')
+        self.masked_number_match_enabled = attributes[:'masked_number_match_enabled']
+      else
+        self.masked_number_match_enabled = false
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          manual_entry_enabled == o.manual_entry_enabled &&
+          masked_number_match_enabled == o.masked_number_match_enabled
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [manual_entry_enabled, masked_number_match_enabled].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Plaid.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/plaid/models/link_user_delivery_status_webhook.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1
@@ -22,7 +22,7 @@ module Plaid
     # `DELIVERY_STATUS`
     attr_accessor :webhook_code
 
-    # The ID of the link delivery session.
+    # The ID of the Hosted Link session.
     attr_accessor :link_delivery_session_id
 
     # Timestamp in [ISO 8601](https://wikipedia.org/wiki/ISO_8601) format.

data/lib/plaid/models/loan.rb

@@ -3,7 +3,7 @@
 
 #The Plaid REST API. Please see https://plaid.com/docs/api for more details.
 
-The version of the OpenAPI document: 2020-09-14_1.370.0
+The version of the OpenAPI document: 2020-09-14_1.379.0
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.1