physique 0.3.10 → 0.4.0

data/spec/test_data/solutions/basic/Rakefile.rb

@@ -1,10 +1,10 @@
-require 'physique'
-
-Physique::Solution.new do |s|
-  s.file = 'Basic.sln'
-
-  s.use_nuget do |n|
-    n.exe = '../.nuget/nuget.exe'
-    n.restore_location = 'packages'
-  end
-end
+require 'physique'
+
+Physique::Solution.new do |s|
+  s.file = 'Basic.sln'
+
+  s.use_nuget do |n|
+    n.exe = '../.nuget/nuget.exe'
+    n.restore_location = 'packages'
+  end
+end

data/spec/test_data/solutions/basic/packages.config

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="utf-8"?>
-<packages>
-  <package id="NUnit.Runners" version="2.6.3" />
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="NUnit.Runners" version="2.6.3" />
 </packages>

data/spec/test_data/solutions/fluent-migrator/.semver

@@ -1,6 +1,6 @@
----
-:major: 0
-:minor: 0
-:patch: 0
-:special: ''
-:metadata: ''
+---
+:major: 0
+:minor: 0
+:patch: 0
+:special: ''
+:metadata: ''

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/Properties/AssemblyInfo.cs

@@ -1,36 +1,36 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("Basic.Migrations")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("Basic.Migrations")]
-[assembly: AssemblyCopyright("Copyright ©  2015")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("a3fc8dd7-523f-4e07-a502-719c4d35ad76")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Basic.Migrations")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Basic.Migrations")]
+[assembly: AssemblyCopyright("Copyright ©  2015")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("a3fc8dd7-523f-4e07-a502-719c4d35ad76")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers 
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/TestMigration.cs

@@ -1,19 +1,19 @@
-using FluentMigrator;
-
-namespace Basic.Migrations
-{
-    [Migration(1)]
-    public class TestMigration : Migration
-    {
-        public override void Up()
-        {
-            Create.Table("TestTable")
-                .WithColumn("Test").AsString();
-        }
-
-        public override void Down()
-        {
-            Delete.Table("TestTable");
-        }
-    }
-}
+using FluentMigrator;
+
+namespace Basic.Migrations
+{
+    [Migration(1)]
+    public class TestMigration : Migration
+    {
+        public override void Up()
+        {
+            Create.Table("TestTable")
+                .WithColumn("Test").AsString();
+        }
+
+        public override void Down()
+        {
+            Delete.Table("TestTable");
+        }
+    }
+}

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/_Scripts/create.sql

@@ -1,2 +1,2 @@
-CREATE DATABASE $(DATABASE_NAME)
+CREATE DATABASE $(DATABASE_NAME)
 GO

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/_Scripts/drop.sql

@@ -1,5 +1,5 @@
--- Drop the database
-if EXISTS(select name from master.dbo.sysdatabases where name = '$(DATABASE_NAME)') begin
-    drop database $(DATABASE_NAME)
-end
+-- Drop the database
+if EXISTS(select name from master.dbo.sysdatabases where name = '$(DATABASE_NAME)') begin
+    drop database $(DATABASE_NAME)
+end
 GO

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/_Scripts/seed.sql

@@ -1,2 +1,2 @@
--- Do nothing.
+-- Do nothing.
 GO

data/spec/test_data/solutions/fluent-migrator/Basic.Migrations/packages.config

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="utf-8"?>
-<packages>
-  <package id="FluentMigrator" version="1.4.0.0" targetFramework="net45" />
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="FluentMigrator" version="1.4.0.0" targetFramework="net45" />
 </packages>

data/spec/test_data/solutions/fluent-migrator/Basic.Specs/Basic.Specs.csproj

@@ -1,60 +1,60 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProjectGuid>{85BD5CF1-C9BF-4F94-9063-C72C165A327C}</ProjectGuid>
-    <OutputType>Library</OutputType>
-    <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>Basic.Specs</RootNamespace>
-    <AssemblyName>Basic.Specs</AssemblyName>
-    <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="NSpec">
-      <HintPath>..\packages\nspec.0.9.68\lib\NSpec.dll</HintPath>
-    </Reference>
-    <Reference Include="System" />
-    <Reference Include="System.Core" />
-    <Reference Include="System.Xml.Linq" />
-    <Reference Include="System.Data.DataSetExtensions" />
-    <Reference Include="Microsoft.CSharp" />
-    <Reference Include="System.Data" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="Class1.cs" />
-    <Compile Include="DebuggerShim.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-  </ItemGroup>
-  <ItemGroup>
-    <None Include="packages.config" />
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
-       Other similar extension points exist, see Microsoft.Common.targets.
-  <Target Name="BeforeBuild">
-  </Target>
-  <Target Name="AfterBuild">
-  </Target>
-  -->
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{85BD5CF1-C9BF-4F94-9063-C72C165A327C}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>Basic.Specs</RootNamespace>
+    <AssemblyName>Basic.Specs</AssemblyName>
+    <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="NSpec">
+      <HintPath>..\packages\nspec.0.9.68\lib\NSpec.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Class1.cs" />
+    <Compile Include="DebuggerShim.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="packages.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
 </Project>

data/spec/test_data/solutions/fluent-migrator/Basic.Specs/Class1.cs

@@ -1,12 +1,12 @@
-using NSpec;
-
-namespace Basic.Tests
-{
-    public class describe_a_class : nspec
-    {
-        public void it_should_all_work_out()
-        {
-            1.should_be(1);
-        }
-    }
-}
+using NSpec;
+
+namespace Basic.Tests
+{
+    public class describe_a_class : nspec
+    {
+        public void it_should_all_work_out()
+        {
+            1.should_be(1);
+        }
+    }
+}

data/spec/test_data/solutions/fluent-migrator/Basic.Specs/DebuggerShim.cs

@@ -1,42 +1,42 @@
-using System.Linq;
-using System.Reflection;
-using NSpec;
-using NSpec.Domain;
-using NSpec.Domain.Formatters;
-
-/*
- * Howdy,
- * 
- * This is NSpec's DebuggerShim.  It will allow you to use TestDriven.Net or Resharper's test runner to run
- * NSpec tests that are in the same Assembly as this class.  
- * 
- * It's DEFINITELY worth trying specwatchr (http://nspec.org/continuoustesting). Specwatchr automatically
- * runs tests for you.
- * 
- * If you ever want to debug a test when using Specwatchr, simply put the following line in your test:
- * 
- *     System.Diagnostics.Debugger.Launch()
- *     
- * Visual Studio will detect this and will give you a window which you can use to attach a debugger.
- */
-
-//[TestFixture]
-public class DebuggerShim
-{
-    //[Test]
-    public void debug()
-    {
-        var tagOrClassName = "class_or_tag_you_want_to_debug";
-
-        var types = GetType().Assembly.GetTypes(); 
-        // OR
-        // var types = new Type[]{typeof(Some_Type_Containg_some_Specs)};
-        var finder = new SpecFinder(types, "");
-        var builder = new ContextBuilder(finder, new Tags().Parse(tagOrClassName), new DefaultConventions());
-        var runner = new ContextRunner(builder, new ConsoleFormatter(), false);
-        var results = runner.Run(builder.Contexts().Build());
-
-        //assert that there aren't any failures
-        results.Failures().Count().should_be(0);
-    }
-}
+using System.Linq;
+using System.Reflection;
+using NSpec;
+using NSpec.Domain;
+using NSpec.Domain.Formatters;
+
+/*
+ * Howdy,
+ * 
+ * This is NSpec's DebuggerShim.  It will allow you to use TestDriven.Net or Resharper's test runner to run
+ * NSpec tests that are in the same Assembly as this class.  
+ * 
+ * It's DEFINITELY worth trying specwatchr (http://nspec.org/continuoustesting). Specwatchr automatically
+ * runs tests for you.
+ * 
+ * If you ever want to debug a test when using Specwatchr, simply put the following line in your test:
+ * 
+ *     System.Diagnostics.Debugger.Launch()
+ *     
+ * Visual Studio will detect this and will give you a window which you can use to attach a debugger.
+ */
+
+//[TestFixture]
+public class DebuggerShim
+{
+    //[Test]
+    public void debug()
+    {
+        var tagOrClassName = "class_or_tag_you_want_to_debug";
+
+        var types = GetType().Assembly.GetTypes(); 
+        // OR
+        // var types = new Type[]{typeof(Some_Type_Containg_some_Specs)};
+        var finder = new SpecFinder(types, "");
+        var builder = new ContextBuilder(finder, new Tags().Parse(tagOrClassName), new DefaultConventions());
+        var runner = new ContextRunner(builder, new ConsoleFormatter(), false);
+        var results = runner.Run(builder.Contexts().Build());
+
+        //assert that there aren't any failures
+        results.Failures().Count().should_be(0);
+    }
+}

data/spec/test_data/solutions/fluent-migrator/Basic.Specs/Properties/AssemblyInfo.cs

@@ -1,36 +1,36 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("Basic.Specs")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("Basic.Specs")]
-[assembly: AssemblyCopyright("Copyright ©  2015")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("22d050cf-1c33-44e6-bf20-e6f8858ae6fc")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Basic.Specs")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Basic.Specs")]
+[assembly: AssemblyCopyright("Copyright ©  2015")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("22d050cf-1c33-44e6-bf20-e6f8858ae6fc")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers 
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]