pg_query 4.2.1 → 5.1.0

data/ext/pg_query/src_backend_storage_lmgr_s_lock.c

@@ -1,371 +0,0 @@
-/*--------------------------------------------------------------------
- * Symbols referenced in this file:
- * - s_lock
- * - perform_spin_delay
- * - spins_per_delay
- * - s_lock_stuck
- * - finish_spin_delay
- *--------------------------------------------------------------------
- */
-
-/*-------------------------------------------------------------------------
- *
- * s_lock.c
- *	   Hardware-dependent implementation of spinlocks.
- *
- * When waiting for a contended spinlock we loop tightly for awhile, then
- * delay using pg_usleep() and try again.  Preferably, "awhile" should be a
- * small multiple of the maximum time we expect a spinlock to be held.  100
- * iterations seems about right as an initial guess.  However, on a
- * uniprocessor the loop is a waste of cycles, while in a multi-CPU scenario
- * it's usually better to spin a bit longer than to call the kernel, so we try
- * to adapt the spin loop count depending on whether we seem to be in a
- * uniprocessor or multiprocessor.
- *
- * Note: you might think MIN_SPINS_PER_DELAY should be just 1, but you'd
- * be wrong; there are platforms where that can result in a "stuck
- * spinlock" failure.  This has been seen particularly on Alphas; it seems
- * that the first TAS after returning from kernel space will always fail
- * on that hardware.
- *
- * Once we do decide to block, we use randomly increasing pg_usleep()
- * delays. The first delay is 1 msec, then the delay randomly increases to
- * about one second, after which we reset to 1 msec and start again.  The
- * idea here is that in the presence of heavy contention we need to
- * increase the delay, else the spinlock holder may never get to run and
- * release the lock.  (Consider situation where spinlock holder has been
- * nice'd down in priority by the scheduler --- it will not get scheduled
- * until all would-be acquirers are sleeping, so if we always use a 1-msec
- * sleep, there is a real possibility of starvation.)  But we can't just
- * clamp the delay to an upper bound, else it would take a long time to
- * make a reasonable number of tries.
- *
- * We time out and declare error after NUM_DELAYS delays (thus, exactly
- * that many tries).  With the given settings, this will usually take 2 or
- * so minutes.  It seems better to fix the total number of tries (and thus
- * the probability of unintended failure) than to fix the total time
- * spent.
- *
- * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- *
- * IDENTIFICATION
- *	  src/backend/storage/lmgr/s_lock.c
- *
- *-------------------------------------------------------------------------
- */
-#include "postgres.h"
-
-#include <time.h>
-#include <unistd.h>
-
-#include "common/pg_prng.h"
-#include "port/atomics.h"
-#include "storage/s_lock.h"
-
-#define MIN_SPINS_PER_DELAY 10
-#define MAX_SPINS_PER_DELAY 1000
-#define NUM_DELAYS			1000
-#define MIN_DELAY_USEC		1000L
-#define MAX_DELAY_USEC		1000000L
-
-
-
-
-static __thread int	spins_per_delay = DEFAULT_SPINS_PER_DELAY;
-
-
-
-/*
- * s_lock_stuck() - complain about a stuck spinlock
- */
-static void
-s_lock_stuck(const char *file, int line, const char *func)
-{
-	if (!func)
-		func = "(unknown)";
-#if defined(S_LOCK_TEST)
-	fprintf(stderr,
-			"\nStuck spinlock detected at %s, %s:%d.\n",
-			func, file, line);
-	exit(1);
-#else
-	elog(PANIC, "stuck spinlock detected at %s, %s:%d",
-		 func, file, line);
-#endif
-}
-
-/*
- * s_lock(lock) - platform-independent portion of waiting for a spinlock.
- */
-int
-s_lock(volatile slock_t *lock, const char *file, int line, const char *func)
-{
-	SpinDelayStatus delayStatus;
-
-	init_spin_delay(&delayStatus, file, line, func);
-
-	while (TAS_SPIN(lock))
-	{
-		perform_spin_delay(&delayStatus);
-	}
-
-	finish_spin_delay(&delayStatus);
-
-	return delayStatus.delays;
-}
-
-#ifdef USE_DEFAULT_S_UNLOCK
-void
-s_unlock(volatile slock_t *lock)
-{
-#ifdef TAS_ACTIVE_WORD
-	/* HP's PA-RISC */
-	*TAS_ACTIVE_WORD(lock) = -1;
-#else
-	*lock = 0;
-#endif
-}
-#endif
-
-/*
- * Wait while spinning on a contended spinlock.
- */
-void
-perform_spin_delay(SpinDelayStatus *status)
-{
-	/* CPU-specific delay each time through the loop */
-	SPIN_DELAY();
-
-	/* Block the process every spins_per_delay tries */
-	if (++(status->spins) >= spins_per_delay)
-	{
-		if (++(status->delays) > NUM_DELAYS)
-			s_lock_stuck(status->file, status->line, status->func);
-
-		if (status->cur_delay == 0) /* first time to delay? */
-			status->cur_delay = MIN_DELAY_USEC;
-
-		pg_usleep(status->cur_delay);
-
-#if defined(S_LOCK_TEST)
-		fprintf(stdout, "*");
-		fflush(stdout);
-#endif
-
-		/* increase delay by a random fraction between 1X and 2X */
-		status->cur_delay += (int) (status->cur_delay *
-									pg_prng_double(&pg_global_prng_state) + 0.5);
-		/* wrap back to minimum delay when max is exceeded */
-		if (status->cur_delay > MAX_DELAY_USEC)
-			status->cur_delay = MIN_DELAY_USEC;
-
-		status->spins = 0;
-	}
-}
-
-/*
- * After acquiring a spinlock, update estimates about how long to loop.
- *
- * If we were able to acquire the lock without delaying, it's a good
- * indication we are in a multiprocessor.  If we had to delay, it's a sign
- * (but not a sure thing) that we are in a uniprocessor. Hence, we
- * decrement spins_per_delay slowly when we had to delay, and increase it
- * rapidly when we didn't.  It's expected that spins_per_delay will
- * converge to the minimum value on a uniprocessor and to the maximum
- * value on a multiprocessor.
- *
- * Note: spins_per_delay is local within our current process. We want to
- * average these observations across multiple backends, since it's
- * relatively rare for this function to even get entered, and so a single
- * backend might not live long enough to converge on a good value.  That
- * is handled by the two routines below.
- */
-void
-finish_spin_delay(SpinDelayStatus *status)
-{
-	if (status->cur_delay == 0)
-	{
-		/* we never had to delay */
-		if (spins_per_delay < MAX_SPINS_PER_DELAY)
-			spins_per_delay = Min(spins_per_delay + 100, MAX_SPINS_PER_DELAY);
-	}
-	else
-	{
-		if (spins_per_delay > MIN_SPINS_PER_DELAY)
-			spins_per_delay = Max(spins_per_delay - 1, MIN_SPINS_PER_DELAY);
-	}
-}
-
-/*
- * Set local copy of spins_per_delay during backend startup.
- *
- * NB: this has to be pretty fast as it is called while holding a spinlock
- */
-
-
-/*
- * Update shared estimate of spins_per_delay during backend exit.
- *
- * NB: this has to be pretty fast as it is called while holding a spinlock
- */
-
-
-
-/*
- * Various TAS implementations that cannot live in s_lock.h as no inline
- * definition exists (yet).
- * In the future, get rid of tas.[cso] and fold it into this file.
- *
- * If you change something here, you will likely need to modify s_lock.h too,
- * because the definitions for these are split between this file and s_lock.h.
- */
-
-
-#ifdef HAVE_SPINLOCKS			/* skip spinlocks if requested */
-
-
-#if defined(__GNUC__)
-
-/*
- * All the gcc flavors that are not inlined
- */
-
-
-/*
- * Note: all the if-tests here probably ought to be testing gcc version
- * rather than platform, but I don't have adequate info to know what to
- * write.  Ideally we'd flush all this in favor of the inline version.
- */
-#if defined(__m68k__) && !defined(__linux__)
-/* really means: extern int tas(slock_t* **lock); */
-static void
-tas_dummy()
-{
-	__asm__ __volatile__(
-#if (defined(__NetBSD__) || defined(__OpenBSD__)) && defined(__ELF__)
-/* no underscore for label and % for registers */
-						 "\
-.global		tas 				\n\
-tas:							\n\
-			movel	%sp@(0x4),%a0	\n\
-			tas 	%a0@		\n\
-			beq 	_success	\n\
-			moveq	#-128,%d0	\n\
-			rts 				\n\
-_success:						\n\
-			moveq	#0,%d0		\n\
-			rts 				\n"
-#else
-						 "\
-.global		_tas				\n\
-_tas:							\n\
-			movel	sp@(0x4),a0	\n\
-			tas 	a0@			\n\
-			beq 	_success	\n\
-			moveq 	#-128,d0	\n\
-			rts					\n\
-_success:						\n\
-			moveq 	#0,d0		\n\
-			rts					\n"
-#endif							/* (__NetBSD__ || __OpenBSD__) && __ELF__ */
-		);
-}
-#endif							/* __m68k__ && !__linux__ */
-#endif							/* not __GNUC__ */
-#endif							/* HAVE_SPINLOCKS */
-
-
-
-/*****************************************************************************/
-#if defined(S_LOCK_TEST)
-
-/*
- * test program for verifying a port's spinlock support.
- */
-
-struct test_lock_struct
-{
-	char		pad1;
-	slock_t		lock;
-	char		pad2;
-};
-
-volatile struct test_lock_struct test_lock;
-
-int
-main()
-{
-	pg_prng_seed(&pg_global_prng_state, (uint64) time(NULL));
-
-	test_lock.pad1 = test_lock.pad2 = 0x44;
-
-	S_INIT_LOCK(&test_lock.lock);
-
-	if (test_lock.pad1 != 0x44 || test_lock.pad2 != 0x44)
-	{
-		printf("S_LOCK_TEST: failed, declared datatype is wrong size\n");
-		return 1;
-	}
-
-	if (!S_LOCK_FREE(&test_lock.lock))
-	{
-		printf("S_LOCK_TEST: failed, lock not initialized\n");
-		return 1;
-	}
-
-	S_LOCK(&test_lock.lock);
-
-	if (test_lock.pad1 != 0x44 || test_lock.pad2 != 0x44)
-	{
-		printf("S_LOCK_TEST: failed, declared datatype is wrong size\n");
-		return 1;
-	}
-
-	if (S_LOCK_FREE(&test_lock.lock))
-	{
-		printf("S_LOCK_TEST: failed, lock not locked\n");
-		return 1;
-	}
-
-	S_UNLOCK(&test_lock.lock);
-
-	if (test_lock.pad1 != 0x44 || test_lock.pad2 != 0x44)
-	{
-		printf("S_LOCK_TEST: failed, declared datatype is wrong size\n");
-		return 1;
-	}
-
-	if (!S_LOCK_FREE(&test_lock.lock))
-	{
-		printf("S_LOCK_TEST: failed, lock not unlocked\n");
-		return 1;
-	}
-
-	S_LOCK(&test_lock.lock);
-
-	if (test_lock.pad1 != 0x44 || test_lock.pad2 != 0x44)
-	{
-		printf("S_LOCK_TEST: failed, declared datatype is wrong size\n");
-		return 1;
-	}
-
-	if (S_LOCK_FREE(&test_lock.lock))
-	{
-		printf("S_LOCK_TEST: failed, lock not re-locked\n");
-		return 1;
-	}
-
-	printf("S_LOCK_TEST: this will print %d stars and then\n", NUM_DELAYS);
-	printf("             exit with a 'stuck spinlock' message\n");
-	printf("             if S_LOCK() and TAS() are working.\n");
-	fflush(stdout);
-
-	s_lock(&test_lock.lock, __FILE__, __LINE__, PG_FUNCNAME_MACRO);
-
-	printf("S_LOCK_TEST: failed, lock not locked\n");
-	return 1;
-}
-
-#endif							/* S_LOCK_TEST */