pg_query 2.2.1 → 4.2.0

data/ext/pg_query/src_backend_libpq_pqcomm.c

@@ -1,659 +0,0 @@
-/*--------------------------------------------------------------------
- * Symbols referenced in this file:
- * - PqCommMethods
- *--------------------------------------------------------------------
- */
-
-/*-------------------------------------------------------------------------
- *
- * pqcomm.c
- *	  Communication functions between the Frontend and the Backend
- *
- * These routines handle the low-level details of communication between
- * frontend and backend.  They just shove data across the communication
- * channel, and are ignorant of the semantics of the data --- or would be,
- * except for major brain damage in the design of the old COPY OUT protocol.
- * Unfortunately, COPY OUT was designed to commandeer the communication
- * channel (it just transfers data without wrapping it into messages).
- * No other messages can be sent while COPY OUT is in progress; and if the
- * copy is aborted by an ereport(ERROR), we need to close out the copy so that
- * the frontend gets back into sync.  Therefore, these routines have to be
- * aware of COPY OUT state.  (New COPY-OUT is message-based and does *not*
- * set the DoingCopyOut flag.)
- *
- * NOTE: generally, it's a bad idea to emit outgoing messages directly with
- * pq_putbytes(), especially if the message would require multiple calls
- * to send.  Instead, use the routines in pqformat.c to construct the message
- * in a buffer and then emit it in one call to pq_putmessage.  This ensures
- * that the channel will not be clogged by an incomplete message if execution
- * is aborted by ereport(ERROR) partway through the message.  The only
- * non-libpq code that should call pq_putbytes directly is old-style COPY OUT.
- *
- * At one time, libpq was shared between frontend and backend, but now
- * the backend's "backend/libpq" is quite separate from "interfaces/libpq".
- * All that remains is similarities of names to trap the unwary...
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- *	src/backend/libpq/pqcomm.c
- *
- *-------------------------------------------------------------------------
- */
-
-/*------------------------
- * INTERFACE ROUTINES
- *
- * setup/teardown:
- *		StreamServerPort	- Open postmaster's server port
- *		StreamConnection	- Create new connection with client
- *		StreamClose			- Close a client/backend connection
- *		TouchSocketFiles	- Protect socket files against /tmp cleaners
- *		pq_init			- initialize libpq at backend startup
- *		socket_comm_reset	- reset libpq during error recovery
- *		socket_close		- shutdown libpq at backend exit
- *
- * low-level I/O:
- *		pq_getbytes		- get a known number of bytes from connection
- *		pq_getstring	- get a null terminated string from connection
- *		pq_getmessage	- get a message with length word from connection
- *		pq_getbyte		- get next byte from connection
- *		pq_peekbyte		- peek at next byte from connection
- *		pq_putbytes		- send bytes to connection (not flushed until pq_flush)
- *		pq_flush		- flush pending output
- *		pq_flush_if_writable - flush pending output if writable without blocking
- *		pq_getbyte_if_available - get a byte if available without blocking
- *
- * message-level I/O (and old-style-COPY-OUT cruft):
- *		pq_putmessage	- send a normal message (suppressed in COPY OUT mode)
- *		pq_putmessage_noblock - buffer a normal message (suppressed in COPY OUT)
- *		pq_startcopyout - inform libpq that a COPY OUT transfer is beginning
- *		pq_endcopyout	- end a COPY OUT transfer
- *
- *------------------------
- */
-#include "postgres.h"
-
-#include <signal.h>
-#include <fcntl.h>
-#include <grp.h>
-#include <unistd.h>
-#include <sys/file.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <netdb.h>
-#include <netinet/in.h>
-#ifdef HAVE_NETINET_TCP_H
-#include <netinet/tcp.h>
-#endif
-#include <utime.h>
-#ifdef _MSC_VER					/* mstcpip.h is missing on mingw */
-#include <mstcpip.h>
-#endif
-
-#include "common/ip.h"
-#include "libpq/libpq.h"
-#include "miscadmin.h"
-#include "port/pg_bswap.h"
-#include "storage/ipc.h"
-#include "utils/guc.h"
-#include "utils/memutils.h"
-
-/*
- * Cope with the various platform-specific ways to spell TCP keepalive socket
- * options.  This doesn't cover Windows, which as usual does its own thing.
- */
-#if defined(TCP_KEEPIDLE)
-/* TCP_KEEPIDLE is the name of this option on Linux and *BSD */
-#define PG_TCP_KEEPALIVE_IDLE TCP_KEEPIDLE
-#define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPIDLE"
-#elif defined(TCP_KEEPALIVE_THRESHOLD)
-/* TCP_KEEPALIVE_THRESHOLD is the name of this option on Solaris >= 11 */
-#define PG_TCP_KEEPALIVE_IDLE TCP_KEEPALIVE_THRESHOLD
-#define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPALIVE_THRESHOLD"
-#elif defined(TCP_KEEPALIVE) && defined(__darwin__)
-/* TCP_KEEPALIVE is the name of this option on macOS */
-/* Caution: Solaris has this symbol but it means something different */
-#define PG_TCP_KEEPALIVE_IDLE TCP_KEEPALIVE
-#define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPALIVE"
-#endif
-
-/*
- * Configuration options
- */
-
-
-
-/* Where the Unix socket files are (list of palloc'd strings) */
-
-
-/*
- * Buffers for low-level I/O.
- *
- * The receive buffer is fixed size. Send buffer is usually 8k, but can be
- * enlarged by pq_putmessage_noblock() if the message doesn't fit otherwise.
- */
-
-#define PQ_SEND_BUFFER_SIZE 8192
-#define PQ_RECV_BUFFER_SIZE 8192
-
-
-	/* Size send buffer */
-		/* Next index to store a byte in PqSendBuffer */
-		/* Next index to send a byte in PqSendBuffer */
-
-
-		/* Next index to read a byte from PqRecvBuffer */
-		/* End of data available in PqRecvBuffer */
-
-/*
- * Message status
- */
-			/* busy sending data to the client */
-	/* in the middle of reading a message */
-		/* in old-protocol COPY OUT processing */
-
-
-/* Internal functions */
-static void socket_comm_reset(void);
-static void socket_close(int code, Datum arg);
-static void socket_set_nonblocking(bool nonblocking);
-static int	socket_flush(void);
-static int	socket_flush_if_writable(void);
-static bool socket_is_send_pending(void);
-static int	socket_putmessage(char msgtype, const char *s, size_t len);
-static void socket_putmessage_noblock(char msgtype, const char *s, size_t len);
-static void socket_startcopyout(void);
-static void socket_endcopyout(bool errorAbort);
-static int	internal_putbytes(const char *s, size_t len);
-static int	internal_flush(void);
-
-#ifdef HAVE_UNIX_SOCKETS
-static int	Lock_AF_UNIX(const char *unixSocketDir, const char *unixSocketPath);
-static int	Setup_AF_UNIX(const char *sock_path);
-#endif							/* HAVE_UNIX_SOCKETS */
-
-
-
-const PQcommMethods *PqCommMethods = NULL;
-
-
-
-
-
-/* --------------------------------
- *		pq_init - initialize libpq at backend startup
- * --------------------------------
- */
-#ifndef WIN32
-#endif
-
-/* --------------------------------
- *		socket_comm_reset - reset libpq during error recovery
- *
- * This is called from error recovery at the outer idle loop.  It's
- * just to get us out of trouble if we somehow manage to elog() from
- * inside a pqcomm.c routine (which ideally will never happen, but...)
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		socket_close - shutdown libpq at backend exit
- *
- * This is the one pg_on_exit_callback in place during BackendInitialize().
- * That function's unusual signal handling constrains that this callback be
- * safe to run at any instant.
- * --------------------------------
- */
-#ifdef ENABLE_GSS
-#endif							/* ENABLE_GSS */
-
-
-
-/*
- * Streams -- wrapper around Unix socket system calls
- *
- *
- *		Stream functions are used for vanilla TCP connection protocol.
- */
-
-
-/*
- * StreamServerPort -- open a "listening" port to accept connections.
- *
- * family should be AF_UNIX or AF_UNSPEC; portNumber is the port number.
- * For AF_UNIX ports, hostName should be NULL and unixSocketDir must be
- * specified.  For TCP ports, hostName is either NULL for all interfaces or
- * the interface to listen on, and unixSocketDir is ignored (can be NULL).
- *
- * Successfully opened sockets are added to the ListenSocket[] array (of
- * length MaxListen), at the first position that isn't PGINVALID_SOCKET.
- *
- * RETURNS: STATUS_OK or STATUS_ERROR
- */
-
-#ifdef HAVE_UNIX_SOCKETS
-#endif
-#if !defined(WIN32) || defined(IPV6_V6ONLY)
-#endif
-#ifdef HAVE_UNIX_SOCKETS
-#endif							/* HAVE_UNIX_SOCKETS */
-#ifdef HAVE_IPV6
-#endif
-#ifdef HAVE_UNIX_SOCKETS
-#endif
-#ifdef HAVE_UNIX_SOCKETS
-#endif
-#ifndef WIN32
-#endif
-#ifdef IPV6_V6ONLY
-#endif
-#ifdef HAVE_UNIX_SOCKETS
-#endif
-#ifdef HAVE_UNIX_SOCKETS
-#endif
-
-
-#ifdef HAVE_UNIX_SOCKETS
-
-/*
- * Lock_AF_UNIX -- configure unix socket file path
- */
-
-
-
-/*
- * Setup_AF_UNIX -- configure unix socket permissions
- */
-#ifdef WIN32
-#else
-#endif
-#endif							/* HAVE_UNIX_SOCKETS */
-
-
-/*
- * StreamConnection -- create a new connection with client using
- *		server port.  Set port->sock to the FD of the new connection.
- *
- * ASSUME: that this doesn't need to be non-blocking because
- *		the Postmaster uses select() to tell when the server master
- *		socket is ready for accept().
- *
- * RETURNS: STATUS_OK or STATUS_ERROR
- */
-#ifdef WIN32
-#endif
-#ifdef	TCP_NODELAY
-#endif
-#ifdef WIN32
-#endif
-
-/*
- * StreamClose -- close a client/backend connection
- *
- * NOTE: this is NOT used to terminate a session; it is just used to release
- * the file descriptor in a process that should no longer have the socket
- * open.  (For example, the postmaster calls this after passing ownership
- * of the connection to a child process.)  It is expected that someone else
- * still has the socket open.  So, we only want to close the descriptor,
- * we do NOT want to send anything to the far end.
- */
-
-
-/*
- * TouchSocketFiles -- mark socket files as recently accessed
- *
- * This routine should be called every so often to ensure that the socket
- * files have a recent mod date (ordinary operations on sockets usually won't
- * change the mod date).  That saves them from being removed by
- * overenthusiastic /tmp-directory-cleaner daemons.  (Another reason we should
- * never have put the socket file in /tmp...)
- */
-
-
-/*
- * RemoveSocketFiles -- unlink socket files at postmaster shutdown
- */
-
-
-
-/* --------------------------------
- * Low-level I/O routines begin here.
- *
- * These routines communicate with a frontend client across a connection
- * already established by the preceding routines.
- * --------------------------------
- */
-
-/* --------------------------------
- *			  socket_set_nonblocking - set socket blocking/non-blocking
- *
- * Sets the socket non-blocking if nonblocking is true, or sets it
- * blocking otherwise.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_recvbuf - load some bytes into the input buffer
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_getbyte	- get a single byte from connection, or return EOF
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_peekbyte		- peek at next byte from connection
- *
- *	 Same as pq_getbyte() except we don't advance the pointer.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_getbyte_if_available - get a single byte from connection,
- *			if available
- *
- * The received byte is stored in *c. Returns 1 if a byte was read,
- * 0 if no data was available, or EOF if trouble.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_getbytes		- get a known number of bytes from connection
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_discardbytes		- throw away a known number of bytes
- *
- *		same as pq_getbytes except we do not copy the data to anyplace.
- *		this is used for resynchronizing after read errors.
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_getstring	- get a null terminated string from connection
- *
- *		The return value is placed in an expansible StringInfo, which has
- *		already been initialized by the caller.
- *
- *		This is used only for dealing with old-protocol clients.  The idea
- *		is to produce a StringInfo that looks the same as we would get from
- *		pq_getmessage() with a newer client; we will then process it with
- *		pq_getmsgstring.  Therefore, no character set conversion is done here,
- *		even though this is presumably useful only for text.
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_buffer_has_data		- is any buffered data available to read?
- *
- * This will *not* attempt to read more data.
- * --------------------------------
- */
-
-
-
-/* --------------------------------
- *		pq_startmsgread - begin reading a message from the client.
- *
- *		This must be called before any of the pq_get* functions.
- * --------------------------------
- */
-
-
-
-/* --------------------------------
- *		pq_endmsgread	- finish reading message.
- *
- *		This must be called after reading a V2 protocol message with
- *		pq_getstring() and friends, to indicate that we have read the whole
- *		message. In V3 protocol, pq_getmessage() does this implicitly.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_is_reading_msg - are we currently reading a message?
- *
- * This is used in error recovery at the outer idle loop to detect if we have
- * lost protocol sync, and need to terminate the connection. pq_startmsgread()
- * will check for that too, but it's nicer to detect it earlier.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_getmessage	- get a message with length word from connection
- *
- *		The return value is placed in an expansible StringInfo, which has
- *		already been initialized by the caller.
- *		Only the message body is placed in the StringInfo; the length word
- *		is removed.  Also, s->cursor is initialized to zero for convenience
- *		in scanning the message contents.
- *
- *		If maxlen is not zero, it is an upper limit on the length of the
- *		message we are willing to accept.  We abort the connection (by
- *		returning EOF) if client tries to send more than that.
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-
-/* --------------------------------
- *		pq_putbytes		- send bytes to connection (not flushed until pq_flush)
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-
-
-/* --------------------------------
- *		socket_flush		- flush pending output
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		internal_flush - flush pending output
- *
- * Returns 0 if OK (meaning everything was sent, or operation would block
- * and the socket is in non-blocking mode), or EOF if trouble.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_flush_if_writable - flush pending output if writable without blocking
- *
- * Returns 0 if OK, or EOF if trouble.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *	socket_is_send_pending	- is there any pending data in the output buffer?
- * --------------------------------
- */
-
-
-/* --------------------------------
- * Message-level I/O routines begin here.
- *
- * These routines understand about the old-style COPY OUT protocol.
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		socket_putmessage - send a normal message (suppressed in COPY OUT mode)
- *
- *		If msgtype is not '\0', it is a message type code to place before
- *		the message body.  If msgtype is '\0', then the message has no type
- *		code (this is only valid in pre-3.0 protocols).
- *
- *		len is the length of the message body data at *s.  In protocol 3.0
- *		and later, a message length word (equal to len+4 because it counts
- *		itself too) is inserted by this routine.
- *
- *		All normal messages are suppressed while old-style COPY OUT is in
- *		progress.  (In practice only a few notice messages might get emitted
- *		then; dropping them is annoying, but at least they will still appear
- *		in the postmaster log.)
- *
- *		We also suppress messages generated while pqcomm.c is busy.  This
- *		avoids any possibility of messages being inserted within other
- *		messages.  The only known trouble case arises if SIGQUIT occurs
- *		during a pqcomm.c routine --- quickdie() will try to send a warning
- *		message, and the most reasonable approach seems to be to drop it.
- *
- *		returns 0 if OK, EOF if trouble
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		pq_putmessage_noblock	- like pq_putmessage, but never blocks
- *
- *		If the output buffer is too small to hold the message, the buffer
- *		is enlarged.
- */
-
-
-
-/* --------------------------------
- *		socket_startcopyout - inform libpq that an old-style COPY OUT transfer
- *			is beginning
- * --------------------------------
- */
-
-
-/* --------------------------------
- *		socket_endcopyout	- end an old-style COPY OUT transfer
- *
- *		If errorAbort is indicated, we are aborting a COPY OUT due to an error,
- *		and must send a terminator line.  Since a partial data line might have
- *		been emitted, send a couple of newlines first (the first one could
- *		get absorbed by a backslash...)  Note that old-style COPY OUT does
- *		not allow binary transfers, so a textual terminator is always correct.
- * --------------------------------
- */
-
-
-/*
- * Support for TCP Keepalive parameters
- */
-
-/*
- * On Windows, we need to set both idle and interval at the same time.
- * We also cannot reset them to the default (setting to zero will
- * actually set them to zero, not default), therefore we fallback to
- * the out-of-the-box default instead.
- */
-#if defined(WIN32) && defined(SIO_KEEPALIVE_VALS)
-static int
-pq_setkeepaliveswin32(Port *port, int idle, int interval)
-{
-	struct tcp_keepalive ka;
-	DWORD		retsize;
-
-	if (idle <= 0)
-		idle = 2 * 60 * 60;		/* default = 2 hours */
-	if (interval <= 0)
-		interval = 1;			/* default = 1 second */
-
-	ka.onoff = 1;
-	ka.keepalivetime = idle * 1000;
-	ka.keepaliveinterval = interval * 1000;
-
-	if (WSAIoctl(port->sock,
-				 SIO_KEEPALIVE_VALS,
-				 (LPVOID) &ka,
-				 sizeof(ka),
-				 NULL,
-				 0,
-				 &retsize,
-				 NULL,
-				 NULL)
-		!= 0)
-	{
-		elog(LOG, "WSAIoctl(SIO_KEEPALIVE_VALS) failed: %ui",
-			 WSAGetLastError());
-		return STATUS_ERROR;
-	}
-	if (port->keepalives_idle != idle)
-		port->keepalives_idle = idle;
-	if (port->keepalives_interval != interval)
-		port->keepalives_interval = interval;
-	return STATUS_OK;
-}
-#endif
-
-#if defined(PG_TCP_KEEPALIVE_IDLE) || defined(SIO_KEEPALIVE_VALS)
-#ifndef WIN32
-#else							/* WIN32 */
-#endif							/* WIN32 */
-#else
-#endif
-
-#if defined(PG_TCP_KEEPALIVE_IDLE) || defined(SIO_KEEPALIVE_VALS)
-#ifndef WIN32
-#else							/* WIN32 */
-#endif
-#else
-#endif
-
-#if defined(TCP_KEEPINTVL) || defined(SIO_KEEPALIVE_VALS)
-#ifndef WIN32
-#else
-#endif							/* WIN32 */
-#else
-#endif
-
-#if defined(TCP_KEEPINTVL) || defined(SIO_KEEPALIVE_VALS)
-#ifndef WIN32
-#else							/* WIN32 */
-#endif
-#else
-#endif
-
-#ifdef TCP_KEEPCNT
-#else
-#endif
-
-#ifdef TCP_KEEPCNT
-#else
-#endif
-
-#ifdef TCP_USER_TIMEOUT
-#else
-#endif
-
-#ifdef TCP_USER_TIMEOUT
-#else
-#endif