pg_query 2.0.0 → 2.0.1

data/ext/pg_query/include/port/atomics/arch-arm.h

@@ -0,0 +1,26 @@
+/*-------------------------------------------------------------------------
+ *
+ * arch-arm.h
+ *	  Atomic operations considerations specific to ARM
+ *
+ * Portions Copyright (c) 2013-2020, PostgreSQL Global Development Group
+ *
+ * NOTES:
+ *
+ * src/include/port/atomics/arch-arm.h
+ *
+ *-------------------------------------------------------------------------
+ */
+
+/* intentionally no include guards, should only be included by atomics.h */
+#ifndef INSIDE_ATOMICS_H
+#error "should be included via atomics.h"
+#endif
+
+/*
+ * 64 bit atomics on ARM32 are implemented using kernel fallbacks and thus
+ * might be slow, so disable entirely. On ARM64 that problem doesn't exist.
+ */
+#if !defined(__aarch64__) && !defined(__aarch64)
+#define PG_DISABLE_64_BIT_ATOMICS
+#endif  /* __aarch64__ || __aarch64 */

data/ext/pg_query/include/port/atomics/arch-ppc.h

@@ -0,0 +1,254 @@
+/*-------------------------------------------------------------------------
+ *
+ * arch-ppc.h
+ *	  Atomic operations considerations specific to PowerPC
+ *
+ * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * NOTES:
+ *
+ * src/include/port/atomics/arch-ppc.h
+ *
+ *-------------------------------------------------------------------------
+ */
+
+#if defined(__GNUC__)
+
+/*
+ * lwsync orders loads with respect to each other, and similarly with stores.
+ * But a load can be performed before a subsequent store, so sync must be used
+ * for a full memory barrier.
+ */
+#define pg_memory_barrier_impl()	__asm__ __volatile__ ("sync" : : : "memory")
+#define pg_read_barrier_impl()		__asm__ __volatile__ ("lwsync" : : : "memory")
+#define pg_write_barrier_impl()		__asm__ __volatile__ ("lwsync" : : : "memory")
+#endif
+
+#define PG_HAVE_ATOMIC_U32_SUPPORT
+typedef struct pg_atomic_uint32
+{
+	volatile uint32 value;
+} pg_atomic_uint32;
+
+/* 64bit atomics are only supported in 64bit mode */
+#if SIZEOF_VOID_P >= 8
+#define PG_HAVE_ATOMIC_U64_SUPPORT
+typedef struct pg_atomic_uint64
+{
+	volatile uint64 value pg_attribute_aligned(8);
+} pg_atomic_uint64;
+
+#endif
+
+/*
+ * This mimics gcc __atomic_compare_exchange_n(..., __ATOMIC_SEQ_CST), but
+ * code generation differs at the end.  __atomic_compare_exchange_n():
+ *  100:	isync
+ *  104:	mfcr    r3
+ *  108:	rlwinm  r3,r3,3,31,31
+ *  10c:	bne     120 <.eb+0x10>
+ *  110:	clrldi  r3,r3,63
+ *  114:	addi    r1,r1,112
+ *  118:	blr
+ *  11c:	nop
+ *  120:	clrldi  r3,r3,63
+ *  124:	stw     r9,0(r4)
+ *  128:	addi    r1,r1,112
+ *  12c:	blr
+ *
+ * This:
+ *   f0:	isync
+ *   f4:	mfcr    r9
+ *   f8:	rldicl. r3,r9,35,63
+ *   fc:	bne     104 <.eb>
+ *  100:	stw     r10,0(r4)
+ *  104:	addi    r1,r1,112
+ *  108:	blr
+ *
+ * This implementation may or may not have materially different performance.
+ * It's not exploiting the fact that cr0 still holds the relevant comparison
+ * bits, set during the __asm__.  One could fix that by moving more code into
+ * the __asm__.  (That would remove the freedom to eliminate dead stores when
+ * the caller ignores "expected", but few callers do.)
+ *
+ * Recognizing constant "newval" would be superfluous, because there's no
+ * immediate-operand version of stwcx.
+ */
+#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U32
+static inline bool
+pg_atomic_compare_exchange_u32_impl(volatile pg_atomic_uint32 *ptr,
+									uint32 *expected, uint32 newval)
+{
+	uint32 found;
+	uint32 condition_register;
+	bool ret;
+
+#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
+	if (__builtin_constant_p(*expected) &&
+		(int32) *expected <= PG_INT16_MAX &&
+		(int32) *expected >= PG_INT16_MIN)
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	lwarx   %0,0,%5		\n"
+			"	cmpwi   %0,%3		\n"
+			"	bne     $+12		\n"		/* branch to isync */
+			"	stwcx.  %4,0,%5		\n"
+			"	bne     $-16		\n"		/* branch to lwarx */
+			"	isync				\n"
+			"	mfcr    %1          \n"
+:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
+:			"i"(*expected), "r"(newval), "r"(&ptr->value)
+:			"memory", "cc");
+	else
+#endif
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	lwarx   %0,0,%5		\n"
+			"	cmpw    %0,%3		\n"
+			"	bne     $+12		\n"		/* branch to isync */
+			"	stwcx.  %4,0,%5		\n"
+			"	bne     $-16		\n"		/* branch to lwarx */
+			"	isync				\n"
+			"	mfcr    %1          \n"
+:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
+:			"r"(*expected), "r"(newval), "r"(&ptr->value)
+:			"memory", "cc");
+
+	ret = (condition_register >> 29) & 1;	/* test eq bit of cr0 */
+	if (!ret)
+		*expected = found;
+	return ret;
+}
+
+/*
+ * This mirrors gcc __sync_fetch_and_add().
+ *
+ * Like tas(), use constraint "=&b" to avoid allocating r0.
+ */
+#define PG_HAVE_ATOMIC_FETCH_ADD_U32
+static inline uint32
+pg_atomic_fetch_add_u32_impl(volatile pg_atomic_uint32 *ptr, int32 add_)
+{
+	uint32 _t;
+	uint32 res;
+
+#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
+	if (__builtin_constant_p(add_) &&
+		add_ <= PG_INT16_MAX && add_ >= PG_INT16_MIN)
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	lwarx   %1,0,%4		\n"
+			"	addi    %0,%1,%3	\n"
+			"	stwcx.  %0,0,%4		\n"
+			"	bne     $-12		\n"		/* branch to lwarx */
+			"	isync				\n"
+:			"=&r"(_t), "=&b"(res), "+m"(ptr->value)
+:			"i"(add_), "r"(&ptr->value)
+:			"memory", "cc");
+	else
+#endif
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	lwarx   %1,0,%4		\n"
+			"	add     %0,%1,%3	\n"
+			"	stwcx.  %0,0,%4		\n"
+			"	bne     $-12		\n"		/* branch to lwarx */
+			"	isync				\n"
+:			"=&r"(_t), "=&r"(res), "+m"(ptr->value)
+:			"r"(add_), "r"(&ptr->value)
+:			"memory", "cc");
+
+	return res;
+}
+
+#ifdef PG_HAVE_ATOMIC_U64_SUPPORT
+
+#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U64
+static inline bool
+pg_atomic_compare_exchange_u64_impl(volatile pg_atomic_uint64 *ptr,
+									uint64 *expected, uint64 newval)
+{
+	uint64 found;
+	uint32 condition_register;
+	bool ret;
+
+	/* Like u32, but s/lwarx/ldarx/; s/stwcx/stdcx/; s/cmpw/cmpd/ */
+#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
+	if (__builtin_constant_p(*expected) &&
+		(int64) *expected <= PG_INT16_MAX &&
+		(int64) *expected >= PG_INT16_MIN)
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	ldarx   %0,0,%5		\n"
+			"	cmpdi   %0,%3		\n"
+			"	bne     $+12		\n"		/* branch to isync */
+			"	stdcx.  %4,0,%5		\n"
+			"	bne     $-16		\n"		/* branch to ldarx */
+			"	isync				\n"
+			"	mfcr    %1          \n"
+:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
+:			"i"(*expected), "r"(newval), "r"(&ptr->value)
+:			"memory", "cc");
+	else
+#endif
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	ldarx   %0,0,%5		\n"
+			"	cmpd    %0,%3		\n"
+			"	bne     $+12		\n"		/* branch to isync */
+			"	stdcx.  %4,0,%5		\n"
+			"	bne     $-16		\n"		/* branch to ldarx */
+			"	isync				\n"
+			"	mfcr    %1          \n"
+:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
+:			"r"(*expected), "r"(newval), "r"(&ptr->value)
+:			"memory", "cc");
+
+	ret = (condition_register >> 29) & 1;	/* test eq bit of cr0 */
+	if (!ret)
+		*expected = found;
+	return ret;
+}
+
+#define PG_HAVE_ATOMIC_FETCH_ADD_U64
+static inline uint64
+pg_atomic_fetch_add_u64_impl(volatile pg_atomic_uint64 *ptr, int64 add_)
+{
+	uint64 _t;
+	uint64 res;
+
+	/* Like u32, but s/lwarx/ldarx/; s/stwcx/stdcx/ */
+#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
+	if (__builtin_constant_p(add_) &&
+		add_ <= PG_INT16_MAX && add_ >= PG_INT16_MIN)
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	ldarx   %1,0,%4		\n"
+			"	addi    %0,%1,%3	\n"
+			"	stdcx.  %0,0,%4		\n"
+			"	bne     $-12		\n"		/* branch to ldarx */
+			"	isync				\n"
+:			"=&r"(_t), "=&b"(res), "+m"(ptr->value)
+:			"i"(add_), "r"(&ptr->value)
+:			"memory", "cc");
+	else
+#endif
+		__asm__ __volatile__(
+			"	sync				\n"
+			"	ldarx   %1,0,%4		\n"
+			"	add     %0,%1,%3	\n"
+			"	stdcx.  %0,0,%4		\n"
+			"	bne     $-12		\n"		/* branch to ldarx */
+			"	isync				\n"
+:			"=&r"(_t), "=&r"(res), "+m"(ptr->value)
+:			"r"(add_), "r"(&ptr->value)
+:			"memory", "cc");
+
+	return res;
+}
+
+#endif /* PG_HAVE_ATOMIC_U64_SUPPORT */
+
+/* per architecture manual doubleword accesses have single copy atomicity */
+#define PG_HAVE_8BYTE_SINGLE_COPY_ATOMICITY

data/ext/pg_query/include/port/atomics/arch-x86.h

@@ -0,0 +1,252 @@
+/*-------------------------------------------------------------------------
+ *
+ * arch-x86.h
+ *	  Atomic operations considerations specific to intel x86
+ *
+ * Note that we actually require a 486 upwards because the 386 doesn't have
+ * support for xadd and cmpxchg. Given that the 386 isn't supported anywhere
+ * anymore that's not much of a restriction luckily.
+ *
+ * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * NOTES:
+ *
+ * src/include/port/atomics/arch-x86.h
+ *
+ *-------------------------------------------------------------------------
+ */
+
+/*
+ * Both 32 and 64 bit x86 do not allow loads to be reordered with other loads,
+ * or stores to be reordered with other stores, but a load can be performed
+ * before a subsequent store.
+ *
+ * Technically, some x86-ish chips support uncached memory access and/or
+ * special instructions that are weakly ordered.  In those cases we'd need
+ * the read and write barriers to be lfence and sfence.  But since we don't
+ * do those things, a compiler barrier should be enough.
+ *
+ * "lock; addl" has worked for longer than "mfence". It's also rumored to be
+ * faster in many scenarios.
+ */
+
+#if defined(__GNUC__) || defined(__INTEL_COMPILER)
+#if defined(__i386__) || defined(__i386)
+#define pg_memory_barrier_impl()		\
+	__asm__ __volatile__ ("lock; addl $0,0(%%esp)" : : : "memory", "cc")
+#elif defined(__x86_64__)
+#define pg_memory_barrier_impl()		\
+	__asm__ __volatile__ ("lock; addl $0,0(%%rsp)" : : : "memory", "cc")
+#endif
+#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
+
+#define pg_read_barrier_impl()		pg_compiler_barrier_impl()
+#define pg_write_barrier_impl()		pg_compiler_barrier_impl()
+
+/*
+ * Provide implementation for atomics using inline assembly on x86 gcc. It's
+ * nice to support older gcc's and the compare/exchange implementation here is
+ * actually more efficient than the * __sync variant.
+ */
+#if defined(HAVE_ATOMICS)
+
+#if defined(__GNUC__) || defined(__INTEL_COMPILER)
+
+#define PG_HAVE_ATOMIC_FLAG_SUPPORT
+typedef struct pg_atomic_flag
+{
+	volatile char value;
+} pg_atomic_flag;
+
+#define PG_HAVE_ATOMIC_U32_SUPPORT
+typedef struct pg_atomic_uint32
+{
+	volatile uint32 value;
+} pg_atomic_uint32;
+
+/*
+ * It's too complicated to write inline asm for 64bit types on 32bit and the
+ * 486 can't do it anyway.
+ */
+#ifdef __x86_64__
+#define PG_HAVE_ATOMIC_U64_SUPPORT
+typedef struct pg_atomic_uint64
+{
+	/* alignment guaranteed due to being on a 64bit platform */
+	volatile uint64 value;
+} pg_atomic_uint64;
+#endif	/* __x86_64__ */
+
+#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
+
+#endif /* defined(HAVE_ATOMICS) */
+
+#if !defined(PG_HAVE_SPIN_DELAY)
+/*
+ * This sequence is equivalent to the PAUSE instruction ("rep" is
+ * ignored by old IA32 processors if the following instruction is
+ * not a string operation); the IA-32 Architecture Software
+ * Developer's Manual, Vol. 3, Section 7.7.2 describes why using
+ * PAUSE in the inner loop of a spin lock is necessary for good
+ * performance:
+ *
+ *     The PAUSE instruction improves the performance of IA-32
+ *     processors supporting Hyper-Threading Technology when
+ *     executing spin-wait loops and other routines where one
+ *     thread is accessing a shared lock or semaphore in a tight
+ *     polling loop. When executing a spin-wait loop, the
+ *     processor can suffer a severe performance penalty when
+ *     exiting the loop because it detects a possible memory order
+ *     violation and flushes the core processor's pipeline. The
+ *     PAUSE instruction provides a hint to the processor that the
+ *     code sequence is a spin-wait loop. The processor uses this
+ *     hint to avoid the memory order violation and prevent the
+ *     pipeline flush. In addition, the PAUSE instruction
+ *     de-pipelines the spin-wait loop to prevent it from
+ *     consuming execution resources excessively.
+ */
+#if defined(__GNUC__) || defined(__INTEL_COMPILER)
+#define PG_HAVE_SPIN_DELAY
+static __inline__ void
+pg_spin_delay_impl(void)
+{
+	__asm__ __volatile__(" rep; nop			\n");
+}
+#elif defined(_MSC_VER) && defined(__x86_64__)
+#define PG_HAVE_SPIN_DELAY
+static __forceinline void
+pg_spin_delay_impl(void)
+{
+	_mm_pause();
+}
+#elif defined(_MSC_VER)
+#define PG_HAVE_SPIN_DELAY
+static __forceinline void
+pg_spin_delay_impl(void)
+{
+	/* See comment for gcc code. Same code, MASM syntax */
+	__asm rep nop;
+}
+#endif
+#endif /* !defined(PG_HAVE_SPIN_DELAY) */
+
+
+#if defined(HAVE_ATOMICS)
+
+#if defined(__GNUC__) || defined(__INTEL_COMPILER)
+
+#define PG_HAVE_ATOMIC_TEST_SET_FLAG
+static inline bool
+pg_atomic_test_set_flag_impl(volatile pg_atomic_flag *ptr)
+{
+	register char _res = 1;
+
+	__asm__ __volatile__(
+		"	lock			\n"
+		"	xchgb	%0,%1	\n"
+:		"+q"(_res), "+m"(ptr->value)
+:
+:		"memory");
+	return _res == 0;
+}
+
+#define PG_HAVE_ATOMIC_CLEAR_FLAG
+static inline void
+pg_atomic_clear_flag_impl(volatile pg_atomic_flag *ptr)
+{
+	/*
+	 * On a TSO architecture like x86 it's sufficient to use a compiler
+	 * barrier to achieve release semantics.
+	 */
+	__asm__ __volatile__("" ::: "memory");
+	ptr->value = 0;
+}
+
+#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U32
+static inline bool
+pg_atomic_compare_exchange_u32_impl(volatile pg_atomic_uint32 *ptr,
+									uint32 *expected, uint32 newval)
+{
+	char	ret;
+
+	/*
+	 * Perform cmpxchg and use the zero flag which it implicitly sets when
+	 * equal to measure the success.
+	 */
+	__asm__ __volatile__(
+		"	lock				\n"
+		"	cmpxchgl	%4,%5	\n"
+		"   setz		%2		\n"
+:		"=a" (*expected), "=m"(ptr->value), "=q" (ret)
+:		"a" (*expected), "r" (newval), "m"(ptr->value)
+:		"memory", "cc");
+	return (bool) ret;
+}
+
+#define PG_HAVE_ATOMIC_FETCH_ADD_U32
+static inline uint32
+pg_atomic_fetch_add_u32_impl(volatile pg_atomic_uint32 *ptr, int32 add_)
+{
+	uint32 res;
+	__asm__ __volatile__(
+		"	lock				\n"
+		"	xaddl	%0,%1		\n"
+:		"=q"(res), "=m"(ptr->value)
+:		"0" (add_), "m"(ptr->value)
+:		"memory", "cc");
+	return res;
+}
+
+#ifdef __x86_64__
+
+#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U64
+static inline bool
+pg_atomic_compare_exchange_u64_impl(volatile pg_atomic_uint64 *ptr,
+									uint64 *expected, uint64 newval)
+{
+	char	ret;
+
+	/*
+	 * Perform cmpxchg and use the zero flag which it implicitly sets when
+	 * equal to measure the success.
+	 */
+	__asm__ __volatile__(
+		"	lock				\n"
+		"	cmpxchgq	%4,%5	\n"
+		"   setz		%2		\n"
+:		"=a" (*expected), "=m"(ptr->value), "=q" (ret)
+:		"a" (*expected), "r" (newval), "m"(ptr->value)
+:		"memory", "cc");
+	return (bool) ret;
+}
+
+#define PG_HAVE_ATOMIC_FETCH_ADD_U64
+static inline uint64
+pg_atomic_fetch_add_u64_impl(volatile pg_atomic_uint64 *ptr, int64 add_)
+{
+	uint64 res;
+	__asm__ __volatile__(
+		"	lock				\n"
+		"	xaddq	%0,%1		\n"
+:		"=q"(res), "=m"(ptr->value)
+:		"0" (add_), "m"(ptr->value)
+:		"memory", "cc");
+	return res;
+}
+
+#endif /* __x86_64__ */
+
+#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
+
+/*
+ * 8 byte reads / writes have single-copy atomicity on 32 bit x86 platforms
+ * since at least the 586. As well as on all x86-64 cpus.
+ */
+#if defined(__i568__) || defined(__i668__) || /* gcc i586+ */  \
+	(defined(_M_IX86) && _M_IX86 >= 500) || /* msvc i586+ */ \
+	defined(__x86_64__) || defined(__x86_64) || defined(_M_X64) /* gcc, sunpro, msvc */
+#define PG_HAVE_8BYTE_SINGLE_COPY_ATOMICITY
+#endif /* 8 byte single-copy atomicity */
+
+#endif /* HAVE_ATOMICS */