pg_query 1.1.0 → 2.0.1

data/ext/pg_query/include/replication/slot.h

@@ -0,0 +1,219 @@
+/*-------------------------------------------------------------------------
+ * slot.h
+ *	   Replication slot management.
+ *
+ * Copyright (c) 2012-2020, PostgreSQL Global Development Group
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef SLOT_H
+#define SLOT_H
+
+#include "access/xlog.h"
+#include "access/xlogreader.h"
+#include "storage/condition_variable.h"
+#include "storage/lwlock.h"
+#include "storage/shmem.h"
+#include "storage/spin.h"
+
+/*
+ * Behaviour of replication slots, upon release or crash.
+ *
+ * Slots marked as PERSISTENT are crash-safe and will not be dropped when
+ * released. Slots marked as EPHEMERAL will be dropped when released or after
+ * restarts.  Slots marked TEMPORARY will be dropped at the end of a session
+ * or on error.
+ *
+ * EPHEMERAL is used as a not-quite-ready state when creating persistent
+ * slots.  EPHEMERAL slots can be made PERSISTENT by calling
+ * ReplicationSlotPersist().  For a slot that goes away at the end of a
+ * session, TEMPORARY is the appropriate choice.
+ */
+typedef enum ReplicationSlotPersistency
+{
+	RS_PERSISTENT,
+	RS_EPHEMERAL,
+	RS_TEMPORARY
+} ReplicationSlotPersistency;
+
+/* For ReplicationSlotAcquire, q.v. */
+typedef enum SlotAcquireBehavior
+{
+	SAB_Error,
+	SAB_Block,
+	SAB_Inquire
+} SlotAcquireBehavior;
+
+/*
+ * On-Disk data of a replication slot, preserved across restarts.
+ */
+typedef struct ReplicationSlotPersistentData
+{
+	/* The slot's identifier */
+	NameData	name;
+
+	/* database the slot is active on */
+	Oid			database;
+
+	/*
+	 * The slot's behaviour when being dropped (or restored after a crash).
+	 */
+	ReplicationSlotPersistency persistency;
+
+	/*
+	 * xmin horizon for data
+	 *
+	 * NB: This may represent a value that hasn't been written to disk yet;
+	 * see notes for effective_xmin, below.
+	 */
+	TransactionId xmin;
+
+	/*
+	 * xmin horizon for catalog tuples
+	 *
+	 * NB: This may represent a value that hasn't been written to disk yet;
+	 * see notes for effective_xmin, below.
+	 */
+	TransactionId catalog_xmin;
+
+	/* oldest LSN that might be required by this replication slot */
+	XLogRecPtr	restart_lsn;
+
+	/* restart_lsn is copied here when the slot is invalidated */
+	XLogRecPtr	invalidated_at;
+
+	/*
+	 * Oldest LSN that the client has acked receipt for.  This is used as the
+	 * start_lsn point in case the client doesn't specify one, and also as a
+	 * safety measure to jump forwards in case the client specifies a
+	 * start_lsn that's further in the past than this value.
+	 */
+	XLogRecPtr	confirmed_flush;
+
+	/* plugin name */
+	NameData	plugin;
+} ReplicationSlotPersistentData;
+
+/*
+ * Shared memory state of a single replication slot.
+ *
+ * The in-memory data of replication slots follows a locking model based
+ * on two linked concepts:
+ * - A replication slot's in_use flag is switched when added or discarded using
+ * the LWLock ReplicationSlotControlLock, which needs to be hold in exclusive
+ * mode when updating the flag by the backend owning the slot and doing the
+ * operation, while readers (concurrent backends not owning the slot) need
+ * to hold it in shared mode when looking at replication slot data.
+ * - Individual fields are protected by mutex where only the backend owning
+ * the slot is authorized to update the fields from its own slot.  The
+ * backend owning the slot does not need to take this lock when reading its
+ * own fields, while concurrent backends not owning this slot should take the
+ * lock when reading this slot's data.
+ */
+typedef struct ReplicationSlot
+{
+	/* lock, on same cacheline as effective_xmin */
+	slock_t		mutex;
+
+	/* is this slot defined */
+	bool		in_use;
+
+	/* Who is streaming out changes for this slot? 0 in unused slots. */
+	pid_t		active_pid;
+
+	/* any outstanding modifications? */
+	bool		just_dirtied;
+	bool		dirty;
+
+	/*
+	 * For logical decoding, it's extremely important that we never remove any
+	 * data that's still needed for decoding purposes, even after a crash;
+	 * otherwise, decoding will produce wrong answers.  Ordinary streaming
+	 * replication also needs to prevent old row versions from being removed
+	 * too soon, but the worst consequence we might encounter there is
+	 * unwanted query cancellations on the standby.  Thus, for logical
+	 * decoding, this value represents the latest xmin that has actually been
+	 * written to disk, whereas for streaming replication, it's just the same
+	 * as the persistent value (data.xmin).
+	 */
+	TransactionId effective_xmin;
+	TransactionId effective_catalog_xmin;
+
+	/* data surviving shutdowns and crashes */
+	ReplicationSlotPersistentData data;
+
+	/* is somebody performing io on this slot? */
+	LWLock		io_in_progress_lock;
+
+	/* Condition variable signaled when active_pid changes */
+	ConditionVariable active_cv;
+
+	/* all the remaining data is only used for logical slots */
+
+	/*
+	 * When the client has confirmed flushes >= candidate_xmin_lsn we can
+	 * advance the catalog xmin.  When restart_valid has been passed,
+	 * restart_lsn can be increased.
+	 */
+	TransactionId candidate_catalog_xmin;
+	XLogRecPtr	candidate_xmin_lsn;
+	XLogRecPtr	candidate_restart_valid;
+	XLogRecPtr	candidate_restart_lsn;
+} ReplicationSlot;
+
+#define SlotIsPhysical(slot) ((slot)->data.database == InvalidOid)
+#define SlotIsLogical(slot) ((slot)->data.database != InvalidOid)
+
+/*
+ * Shared memory control area for all of replication slots.
+ */
+typedef struct ReplicationSlotCtlData
+{
+	/*
+	 * This array should be declared [FLEXIBLE_ARRAY_MEMBER], but for some
+	 * reason you can't do that in an otherwise-empty struct.
+	 */
+	ReplicationSlot replication_slots[1];
+} ReplicationSlotCtlData;
+
+/*
+ * Pointers to shared memory
+ */
+extern PGDLLIMPORT ReplicationSlotCtlData *ReplicationSlotCtl;
+extern PGDLLIMPORT ReplicationSlot *MyReplicationSlot;
+
+/* GUCs */
+extern PGDLLIMPORT int max_replication_slots;
+
+/* shmem initialization functions */
+extern Size ReplicationSlotsShmemSize(void);
+extern void ReplicationSlotsShmemInit(void);
+
+/* management of individual slots */
+extern void ReplicationSlotCreate(const char *name, bool db_specific,
+								  ReplicationSlotPersistency p);
+extern void ReplicationSlotPersist(void);
+extern void ReplicationSlotDrop(const char *name, bool nowait);
+
+extern int	ReplicationSlotAcquire(const char *name, SlotAcquireBehavior behavior);
+extern void ReplicationSlotRelease(void);
+extern void ReplicationSlotCleanup(void);
+extern void ReplicationSlotSave(void);
+extern void ReplicationSlotMarkDirty(void);
+
+/* misc stuff */
+extern bool ReplicationSlotValidateName(const char *name, int elevel);
+extern void ReplicationSlotReserveWal(void);
+extern void ReplicationSlotsComputeRequiredXmin(bool already_locked);
+extern void ReplicationSlotsComputeRequiredLSN(void);
+extern XLogRecPtr ReplicationSlotsComputeLogicalRestartLSN(void);
+extern bool ReplicationSlotsCountDBSlots(Oid dboid, int *nslots, int *nactive);
+extern void ReplicationSlotsDropDBSlots(Oid dboid);
+extern void InvalidateObsoleteReplicationSlots(XLogSegNo oldestSegno);
+
+extern void StartupReplicationSlots(void);
+extern void CheckPointReplicationSlots(void);
+
+extern void CheckSlotRequirements(void);
+
+#endif							/* SLOT_H */

data/ext/pg_query/include/replication/syncrep.h

@@ -0,0 +1,115 @@
+/*-------------------------------------------------------------------------
+ *
+ * syncrep.h
+ *	  Exports from replication/syncrep.c.
+ *
+ * Portions Copyright (c) 2010-2020, PostgreSQL Global Development Group
+ *
+ * IDENTIFICATION
+ *		src/include/replication/syncrep.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef _SYNCREP_H
+#define _SYNCREP_H
+
+#include "access/xlogdefs.h"
+#include "utils/guc.h"
+
+#define SyncRepRequested() \
+	(max_wal_senders > 0 && synchronous_commit > SYNCHRONOUS_COMMIT_LOCAL_FLUSH)
+
+/* SyncRepWaitMode */
+#define SYNC_REP_NO_WAIT		(-1)
+#define SYNC_REP_WAIT_WRITE		0
+#define SYNC_REP_WAIT_FLUSH		1
+#define SYNC_REP_WAIT_APPLY		2
+
+#define NUM_SYNC_REP_WAIT_MODE	3
+
+/* syncRepState */
+#define SYNC_REP_NOT_WAITING		0
+#define SYNC_REP_WAITING			1
+#define SYNC_REP_WAIT_COMPLETE		2
+
+/* syncrep_method of SyncRepConfigData */
+#define SYNC_REP_PRIORITY		0
+#define SYNC_REP_QUORUM		1
+
+/*
+ * SyncRepGetCandidateStandbys returns an array of these structs,
+ * one per candidate synchronous walsender.
+ */
+typedef struct SyncRepStandbyData
+{
+	/* Copies of relevant fields from WalSnd shared-memory struct */
+	pid_t		pid;
+	XLogRecPtr	write;
+	XLogRecPtr	flush;
+	XLogRecPtr	apply;
+	int			sync_standby_priority;
+	/* Index of this walsender in the WalSnd shared-memory array */
+	int			walsnd_index;
+	/* This flag indicates whether this struct is about our own process */
+	bool		is_me;
+} SyncRepStandbyData;
+
+/*
+ * Struct for the configuration of synchronous replication.
+ *
+ * Note: this must be a flat representation that can be held in a single
+ * chunk of malloc'd memory, so that it can be stored as the "extra" data
+ * for the synchronous_standby_names GUC.
+ */
+typedef struct SyncRepConfigData
+{
+	int			config_size;	/* total size of this struct, in bytes */
+	int			num_sync;		/* number of sync standbys that we need to
+								 * wait for */
+	uint8		syncrep_method; /* method to choose sync standbys */
+	int			nmembers;		/* number of members in the following list */
+	/* member_names contains nmembers consecutive nul-terminated C strings */
+	char		member_names[FLEXIBLE_ARRAY_MEMBER];
+} SyncRepConfigData;
+
+extern SyncRepConfigData *SyncRepConfig;
+
+/* communication variables for parsing synchronous_standby_names GUC */
+extern SyncRepConfigData *syncrep_parse_result;
+extern char *syncrep_parse_error_msg;
+
+/* user-settable parameters for synchronous replication */
+extern char *SyncRepStandbyNames;
+
+/* called by user backend */
+extern void SyncRepWaitForLSN(XLogRecPtr lsn, bool commit);
+
+/* called at backend exit */
+extern void SyncRepCleanupAtProcExit(void);
+
+/* called by wal sender */
+extern void SyncRepInitConfig(void);
+extern void SyncRepReleaseWaiters(void);
+
+/* called by wal sender and user backend */
+extern int	SyncRepGetCandidateStandbys(SyncRepStandbyData **standbys);
+
+/* called by checkpointer */
+extern void SyncRepUpdateSyncStandbysDefined(void);
+
+/* GUC infrastructure */
+extern bool check_synchronous_standby_names(char **newval, void **extra, GucSource source);
+extern void assign_synchronous_standby_names(const char *newval, void *extra);
+extern void assign_synchronous_commit(int newval, void *extra);
+
+/*
+ * Internal functions for parsing synchronous_standby_names grammar,
+ * in syncrep_gram.y and syncrep_scanner.l
+ */
+extern int	syncrep_yyparse(void);
+extern int	syncrep_yylex(void);
+extern void syncrep_yyerror(const char *str);
+extern void syncrep_scanner_init(const char *query_string);
+extern void syncrep_scanner_finish(void);
+
+#endif							/* _SYNCREP_H */

data/ext/pg_query/include/replication/walreceiver.h

@@ -0,0 +1,340 @@
+/*-------------------------------------------------------------------------
+ *
+ * walreceiver.h
+ *	  Exports from replication/walreceiverfuncs.c.
+ *
+ * Portions Copyright (c) 2010-2020, PostgreSQL Global Development Group
+ *
+ * src/include/replication/walreceiver.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef _WALRECEIVER_H
+#define _WALRECEIVER_H
+
+#include "access/xlog.h"
+#include "access/xlogdefs.h"
+#include "getaddrinfo.h"		/* for NI_MAXHOST */
+#include "pgtime.h"
+#include "port/atomics.h"
+#include "replication/logicalproto.h"
+#include "replication/walsender.h"
+#include "storage/latch.h"
+#include "storage/spin.h"
+#include "utils/tuplestore.h"
+
+/* user-settable parameters */
+extern int	wal_receiver_status_interval;
+extern int	wal_receiver_timeout;
+extern bool hot_standby_feedback;
+
+/*
+ * MAXCONNINFO: maximum size of a connection string.
+ *
+ * XXX: Should this move to pg_config_manual.h?
+ */
+#define MAXCONNINFO		1024
+
+/* Can we allow the standby to accept replication connection from another standby? */
+#define AllowCascadeReplication() (EnableHotStandby && max_wal_senders > 0)
+
+/*
+ * Values for WalRcv->walRcvState.
+ */
+typedef enum
+{
+	WALRCV_STOPPED,				/* stopped and mustn't start up again */
+	WALRCV_STARTING,			/* launched, but the process hasn't
+								 * initialized yet */
+	WALRCV_STREAMING,			/* walreceiver is streaming */
+	WALRCV_WAITING,				/* stopped streaming, waiting for orders */
+	WALRCV_RESTARTING,			/* asked to restart streaming */
+	WALRCV_STOPPING				/* requested to stop, but still running */
+} WalRcvState;
+
+/* Shared memory area for management of walreceiver process */
+typedef struct
+{
+	/*
+	 * PID of currently active walreceiver process, its current state and
+	 * start time (actually, the time at which it was requested to be
+	 * started).
+	 */
+	pid_t		pid;
+	WalRcvState walRcvState;
+	pg_time_t	startTime;
+
+	/*
+	 * receiveStart and receiveStartTLI indicate the first byte position and
+	 * timeline that will be received. When startup process starts the
+	 * walreceiver, it sets these to the point where it wants the streaming to
+	 * begin.
+	 */
+	XLogRecPtr	receiveStart;
+	TimeLineID	receiveStartTLI;
+
+	/*
+	 * flushedUpto-1 is the last byte position that has already been received,
+	 * and receivedTLI is the timeline it came from.  At the first startup of
+	 * walreceiver, these are set to receiveStart and receiveStartTLI. After
+	 * that, walreceiver updates these whenever it flushes the received WAL to
+	 * disk.
+	 */
+	XLogRecPtr	flushedUpto;
+	TimeLineID	receivedTLI;
+
+	/*
+	 * latestChunkStart is the starting byte position of the current "batch"
+	 * of received WAL.  It's actually the same as the previous value of
+	 * flushedUpto before the last flush to disk.  Startup process can use
+	 * this to detect whether it's keeping up or not.
+	 */
+	XLogRecPtr	latestChunkStart;
+
+	/*
+	 * Time of send and receive of any message received.
+	 */
+	TimestampTz lastMsgSendTime;
+	TimestampTz lastMsgReceiptTime;
+
+	/*
+	 * Latest reported end of WAL on the sender
+	 */
+	XLogRecPtr	latestWalEnd;
+	TimestampTz latestWalEndTime;
+
+	/*
+	 * connection string; initially set to connect to the primary, and later
+	 * clobbered to hide security-sensitive fields.
+	 */
+	char		conninfo[MAXCONNINFO];
+
+	/*
+	 * Host name (this can be a host name, an IP address, or a directory path)
+	 * and port number of the active replication connection.
+	 */
+	char		sender_host[NI_MAXHOST];
+	int			sender_port;
+
+	/*
+	 * replication slot name; is also used for walreceiver to connect with the
+	 * primary
+	 */
+	char		slotname[NAMEDATALEN];
+
+	/*
+	 * If it's a temporary replication slot, it needs to be recreated when
+	 * connecting.
+	 */
+	bool		is_temp_slot;
+
+	/* set true once conninfo is ready to display (obfuscated pwds etc) */
+	bool		ready_to_display;
+
+	/*
+	 * Latch used by startup process to wake up walreceiver after telling it
+	 * where to start streaming (after setting receiveStart and
+	 * receiveStartTLI), and also to tell it to send apply feedback to the
+	 * primary whenever specially marked commit records are applied. This is
+	 * normally mapped to procLatch when walreceiver is running.
+	 */
+	Latch	   *latch;
+
+	slock_t		mutex;			/* locks shared variables shown above */
+
+	/*
+	 * Like flushedUpto, but advanced after writing and before flushing,
+	 * without the need to acquire the spin lock.  Data can be read by another
+	 * process up to this point, but shouldn't be used for data integrity
+	 * purposes.
+	 */
+	pg_atomic_uint64 writtenUpto;
+
+	/*
+	 * force walreceiver reply?  This doesn't need to be locked; memory
+	 * barriers for ordering are sufficient.  But we do need atomic fetch and
+	 * store semantics, so use sig_atomic_t.
+	 */
+	sig_atomic_t force_reply;	/* used as a bool */
+} WalRcvData;
+
+extern WalRcvData *WalRcv;
+
+typedef struct
+{
+	bool		logical;		/* True if this is logical replication stream,
+								 * false if physical stream.  */
+	char	   *slotname;		/* Name of the replication slot or NULL. */
+	XLogRecPtr	startpoint;		/* LSN of starting point. */
+
+	union
+	{
+		struct
+		{
+			TimeLineID	startpointTLI;	/* Starting timeline */
+		}			physical;
+		struct
+		{
+			uint32		proto_version;	/* Logical protocol version */
+			List	   *publication_names;	/* String list of publications */
+		}			logical;
+	}			proto;
+} WalRcvStreamOptions;
+
+struct WalReceiverConn;
+typedef struct WalReceiverConn WalReceiverConn;
+
+/*
+ * Status of walreceiver query execution.
+ *
+ * We only define statuses that are currently used.
+ */
+typedef enum
+{
+	WALRCV_ERROR,				/* There was error when executing the query. */
+	WALRCV_OK_COMMAND,			/* Query executed utility or replication
+								 * command. */
+	WALRCV_OK_TUPLES,			/* Query returned tuples. */
+	WALRCV_OK_COPY_IN,			/* Query started COPY FROM. */
+	WALRCV_OK_COPY_OUT,			/* Query started COPY TO. */
+	WALRCV_OK_COPY_BOTH			/* Query started COPY BOTH replication
+								 * protocol. */
+} WalRcvExecStatus;
+
+/*
+ * Return value for walrcv_exec, returns the status of the execution and
+ * tuples if any.
+ */
+typedef struct WalRcvExecResult
+{
+	WalRcvExecStatus status;
+	char	   *err;
+	Tuplestorestate *tuplestore;
+	TupleDesc	tupledesc;
+} WalRcvExecResult;
+
+/* libpqwalreceiver hooks */
+typedef WalReceiverConn *(*walrcv_connect_fn) (const char *conninfo, bool logical,
+											   const char *appname,
+											   char **err);
+typedef void (*walrcv_check_conninfo_fn) (const char *conninfo);
+typedef char *(*walrcv_get_conninfo_fn) (WalReceiverConn *conn);
+typedef void (*walrcv_get_senderinfo_fn) (WalReceiverConn *conn,
+										  char **sender_host,
+										  int *sender_port);
+typedef char *(*walrcv_identify_system_fn) (WalReceiverConn *conn,
+											TimeLineID *primary_tli);
+typedef int (*walrcv_server_version_fn) (WalReceiverConn *conn);
+typedef void (*walrcv_readtimelinehistoryfile_fn) (WalReceiverConn *conn,
+												   TimeLineID tli,
+												   char **filename,
+												   char **content, int *size);
+typedef bool (*walrcv_startstreaming_fn) (WalReceiverConn *conn,
+										  const WalRcvStreamOptions *options);
+typedef void (*walrcv_endstreaming_fn) (WalReceiverConn *conn,
+										TimeLineID *next_tli);
+typedef int (*walrcv_receive_fn) (WalReceiverConn *conn, char **buffer,
+								  pgsocket *wait_fd);
+typedef void (*walrcv_send_fn) (WalReceiverConn *conn, const char *buffer,
+								int nbytes);
+typedef char *(*walrcv_create_slot_fn) (WalReceiverConn *conn,
+										const char *slotname, bool temporary,
+										CRSSnapshotAction snapshot_action,
+										XLogRecPtr *lsn);
+typedef pid_t (*walrcv_get_backend_pid_fn) (WalReceiverConn *conn);
+typedef WalRcvExecResult *(*walrcv_exec_fn) (WalReceiverConn *conn,
+											 const char *query,
+											 const int nRetTypes,
+											 const Oid *retTypes);
+typedef void (*walrcv_disconnect_fn) (WalReceiverConn *conn);
+
+typedef struct WalReceiverFunctionsType
+{
+	walrcv_connect_fn walrcv_connect;
+	walrcv_check_conninfo_fn walrcv_check_conninfo;
+	walrcv_get_conninfo_fn walrcv_get_conninfo;
+	walrcv_get_senderinfo_fn walrcv_get_senderinfo;
+	walrcv_identify_system_fn walrcv_identify_system;
+	walrcv_server_version_fn walrcv_server_version;
+	walrcv_readtimelinehistoryfile_fn walrcv_readtimelinehistoryfile;
+	walrcv_startstreaming_fn walrcv_startstreaming;
+	walrcv_endstreaming_fn walrcv_endstreaming;
+	walrcv_receive_fn walrcv_receive;
+	walrcv_send_fn walrcv_send;
+	walrcv_create_slot_fn walrcv_create_slot;
+	walrcv_get_backend_pid_fn walrcv_get_backend_pid;
+	walrcv_exec_fn walrcv_exec;
+	walrcv_disconnect_fn walrcv_disconnect;
+} WalReceiverFunctionsType;
+
+extern PGDLLIMPORT WalReceiverFunctionsType *WalReceiverFunctions;
+
+#define walrcv_connect(conninfo, logical, appname, err) \
+	WalReceiverFunctions->walrcv_connect(conninfo, logical, appname, err)
+#define walrcv_check_conninfo(conninfo) \
+	WalReceiverFunctions->walrcv_check_conninfo(conninfo)
+#define walrcv_get_conninfo(conn) \
+	WalReceiverFunctions->walrcv_get_conninfo(conn)
+#define walrcv_get_senderinfo(conn, sender_host, sender_port) \
+	WalReceiverFunctions->walrcv_get_senderinfo(conn, sender_host, sender_port)
+#define walrcv_identify_system(conn, primary_tli) \
+	WalReceiverFunctions->walrcv_identify_system(conn, primary_tli)
+#define walrcv_server_version(conn) \
+	WalReceiverFunctions->walrcv_server_version(conn)
+#define walrcv_readtimelinehistoryfile(conn, tli, filename, content, size) \
+	WalReceiverFunctions->walrcv_readtimelinehistoryfile(conn, tli, filename, content, size)
+#define walrcv_startstreaming(conn, options) \
+	WalReceiverFunctions->walrcv_startstreaming(conn, options)
+#define walrcv_endstreaming(conn, next_tli) \
+	WalReceiverFunctions->walrcv_endstreaming(conn, next_tli)
+#define walrcv_receive(conn, buffer, wait_fd) \
+	WalReceiverFunctions->walrcv_receive(conn, buffer, wait_fd)
+#define walrcv_send(conn, buffer, nbytes) \
+	WalReceiverFunctions->walrcv_send(conn, buffer, nbytes)
+#define walrcv_create_slot(conn, slotname, temporary, snapshot_action, lsn) \
+	WalReceiverFunctions->walrcv_create_slot(conn, slotname, temporary, snapshot_action, lsn)
+#define walrcv_get_backend_pid(conn) \
+	WalReceiverFunctions->walrcv_get_backend_pid(conn)
+#define walrcv_exec(conn, exec, nRetTypes, retTypes) \
+	WalReceiverFunctions->walrcv_exec(conn, exec, nRetTypes, retTypes)
+#define walrcv_disconnect(conn) \
+	WalReceiverFunctions->walrcv_disconnect(conn)
+
+static inline void
+walrcv_clear_result(WalRcvExecResult *walres)
+{
+	if (!walres)
+		return;
+
+	if (walres->err)
+		pfree(walres->err);
+
+	if (walres->tuplestore)
+		tuplestore_end(walres->tuplestore);
+
+	if (walres->tupledesc)
+		FreeTupleDesc(walres->tupledesc);
+
+	pfree(walres);
+}
+
+/* prototypes for functions in walreceiver.c */
+extern void WalReceiverMain(void) pg_attribute_noreturn();
+extern void ProcessWalRcvInterrupts(void);
+
+/* prototypes for functions in walreceiverfuncs.c */
+extern Size WalRcvShmemSize(void);
+extern void WalRcvShmemInit(void);
+extern void ShutdownWalRcv(void);
+extern bool WalRcvStreaming(void);
+extern bool WalRcvRunning(void);
+extern void RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr,
+								 const char *conninfo, const char *slotname,
+								 bool create_temp_slot);
+extern XLogRecPtr GetWalRcvFlushRecPtr(XLogRecPtr *latestChunkStart, TimeLineID *receiveTLI);
+extern XLogRecPtr GetWalRcvWriteRecPtr(void);
+extern int	GetReplicationApplyDelay(void);
+extern int	GetReplicationTransferLatency(void);
+extern void WalRcvForceReply(void);
+
+#endif							/* _WALRECEIVER_H */