peddler 5.0.0.pre.3 → 5.0.0.pre.4

data/lib/peddler/reports/vendor_forecasting/forecast_by_asin.rb

@@ -14,33 +14,33 @@ module Peddler
         attribute(:asin, String)
 
         # @return [Date] The end date of the time period being forecasted. The forecasted time period includes this
-        # date.
+        #   date.
         attribute(:end_date, Date, from: "endDate")
 
         # @return [Date] The date that the forecast was generated.
         attribute(:forecast_generation_date, Date, from: "forecastGenerationDate")
 
         # @return [Float] The average amount of forecast units that Amazon has predicted for this date range. This means
-        # that, on average, Amazon predicts that this many stock units will be purchased during this date range.
+        #   that, on average, Amazon predicts that this many stock units will be purchased during this date range.
         attribute(:mean_forecast_units, Float, from: "meanForecastUnits")
 
         # @return [Float] The 70th percentile of forecast units that Amazon has predicted for this date range. This
-        # means that Amazon has forecasted a 70% probability that the ASIN will not run out of stock during the date
-        # range if this many units of inventory are present at the start of the date range.
+        #   means that Amazon has forecasted a 70% probability that the ASIN will not run out of stock during the date
+        #   range if this many units of inventory are present at the start of the date range.
         attribute(:p70_forecast_units, Float, from: "p70ForecastUnits")
 
         # @return [Float] The 80th percentile of forecast units that Amazon has predicted for this date range. This
-        # means that Amazon has forecasted an 80% probability that the ASIN will not run out of stock during the date
-        # range if this many units of inventory are present at the start of the date range.
+        #   means that Amazon has forecasted an 80% probability that the ASIN will not run out of stock during the date
+        #   range if this many units of inventory are present at the start of the date range.
         attribute(:p80_forecast_units, Float, from: "p80ForecastUnits")
 
         # @return [Float] The 90th percentile of forecast units that Amazon has predicted for this date range. This
-        # means that Amazon has forecasted a 90% probability that the ASIN will not run out of stock during the date
-        # range if this many units of inventory are present at the start of the date range.
+        #   means that Amazon has forecasted a 90% probability that the ASIN will not run out of stock during the date
+        #   range if this many units of inventory are present at the start of the date range.
         attribute(:p90_forecast_units, Float, from: "p90ForecastUnits")
 
         # @return [Date] The start date of the time period being forecasted. The forecasted time period includes this
-        # date.
+        #   date.
         attribute(:start_date, Date, from: "startDate")
       end
     end

data/lib/peddler/reports/vendor_forecasting/report.rb

@@ -13,7 +13,7 @@ module Peddler
         attribute(:forecast_by_asin, [ForecastByASIN], from: "forecastByAsin")
 
         # @return [Hash] The report input summary which includes the marketplace, selling program, and last updated
-        # date.
+        #   date.
         attribute(:report_specification, ReportSpecification, from: "reportSpecification")
       end
     end

data/lib/peddler/reports/vendor_forecasting/report_specification.rb

@@ -11,11 +11,11 @@ module Peddler
       # The report input summary which includes the marketplace, selling program, and last updated date.
       ReportSpecification = Structure.new do
         # @return [Date] The date when the report was last updated. Follows the
-        # {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
+        #   {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
         attribute(:last_updated_date, Date, from: "lastUpdatedDate")
 
         # @return [Array<String>] This parameter must match the marketplaceId of the selling partner account. Each
-        # selling partner account belongs to only one marketplaceId.
+        #   selling partner account belongs to only one marketplaceId.
         attribute(:marketplace_ids, [String], from: "marketplaceIds")
 
         # @return [ReportOptions] Report options specifying parameters such as sellingProgram.

data/lib/peddler/reports/vendor_inventory/inventory_aggregate.rb

@@ -14,89 +14,89 @@ module Peddler
         attribute(:end_date, Date, from: "endDate")
 
         # @return [Money] Cost of the inventory that Amazon received from the vendor, minus the cost of the inventory
-        # that was returned to the vendor. The cost returned to the vendor takes into account any products that were
-        # returned due to damaged merchandise. This number can be negative if more cost was returned than received.
+        #   that was returned to the vendor. The cost returned to the vendor takes into account any products that were
+        #   returned due to damaged merchandise. This number can be negative if more cost was returned than received.
         attribute(:net_received_inventory_cost, Money, from: "netReceivedInventoryCost")
 
         # @return [Integer] Units received from the vendor minus any units that were returned to the vendor. This number
-        # can be negative if more units were returned than received.
+        #   can be negative if more units were returned than received.
         attribute(:net_received_inventory_units, Integer, from: "netReceivedInventoryUnits")
 
         # @return [Integer] Number of units contained in Amazon’s confirmed purchase orders that are not yet received by
-        # Amazon. This number can be negative if the vendor has shipped more units than Amazon has requested.
+        #   Amazon. This number can be negative if the vendor has shipped more units than Amazon has requested.
         attribute(:open_purchase_order_units, Integer, from: "openPurchaseOrderUnits")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is in a sellable condition on the
-        # last day of the selected time window. Backorders count as a negative cost, and can cause this value to be
-        # negative overall.
+        #   last day of the selected time window. Backorders count as a negative cost, and can cause this value to be
+        #   negative overall.
         attribute(:sellable_on_hand_inventory_cost, Money, from: "sellableOnHandInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that is in a sellable condition on the
-        # last day of the selected time window. Backorders count as negative units, and can cause this value to be
-        # negative overall.
+        #   last day of the selected time window. Backorders count as negative units, and can cause this value to be
+        #   negative overall.
         attribute(:sellable_on_hand_inventory_units, Integer, from: "sellableOnHandInventoryUnits")
 
         # @return [Date] The start date of the aggregated data.
         attribute(:start_date, Date, from: "startDate")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is at least 90 days old, and is
-        # in a sellable condition on the last day of the selected time window. Backorders count as negative cost, and
-        # can cause this value to be negative overall. Inventory age is computed based on when the inventory was
-        # received by Amazon.
+        #   in a sellable condition on the last day of the selected time window. Backorders count as negative cost, and
+        #   can cause this value to be negative overall. Inventory age is computed based on when the inventory was
+        #   received by Amazon.
         attribute?(:aged90_plus_days_sellable_inventory_cost, Money, from: "aged90PlusDaysSellableInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that is at least 90 days old, and is in a
-        # sellable condition on the last day of the selected time window. Backorders count as negative units, and can
-        # cause this value to be negative overall. Inventory age is computed based on when the inventory was received by
-        # Amazon.
+        #   sellable condition on the last day of the selected time window. Backorders count as negative units, and can
+        #   cause this value to be negative overall. Inventory age is computed based on when the inventory was received
+        #   by Amazon.
         attribute?(:aged90_plus_days_sellable_inventory_units, Integer, from: "aged90PlusDaysSellableInventoryUnits")
 
         # @return [Float] Average number of days between the submission of each purchase order unit and the time of
-        # receipt in Amazon's fulfillment centers.
+        #   receipt in Amazon's fulfillment centers.
         attribute?(:average_vendor_lead_time_days, Float, from: "averageVendorLeadTimeDays")
 
         # @return [Float] The out of stock rate on all products that are procurable. This is calculated by out of stock
-        # glance views on a procurable ASIN divided by the total glance views.
+        #   glance views on a procurable ASIN divided by the total glance views.
         attribute?(:procurable_product_out_of_stock_rate, Float, from: "procurableProductOutOfStockRate")
 
         # @return [Float] The purchase order units received by Amazon in comparison to the purchase order units
-        # confirmed by the vendor. This is calculated as the received quantity divided by the confirmed quantity.
+        #   confirmed by the vendor. This is calculated as the received quantity divided by the confirmed quantity.
         attribute?(:receive_fill_rate, Float, from: "receiveFillRate")
 
         # @return [Float] The number of units shipped (less customer returns), divided by the sum of the number of units
-        # held by Amazon at the beginning of this time window and the number of units received during this time window.
-        # This number could be negative if more units were returned than were shipped. This number can be greater than 1
-        # if some inventory was sold while in transit between fulfillment centers.
+        #   held by Amazon at the beginning of this time window and the number of units received during this time
+        #   window. This number could be negative if more units were returned than were shipped. This number can be
+        #   greater than 1 if some inventory was sold while in transit between fulfillment centers.
         attribute?(:sell_through_rate, Float, from: "sellThroughRate")
 
         # @return [Float] The percentage of time an ASIN is available to be shipped to the customer from a fulfillment
-        # center, versus the selection Amazon intended to carry.
+        #   center, versus the selection Amazon intended to carry.
         attribute?(:uft, Float)
 
         # @return [Integer] The number of units that have been ordered (or pre-ordered) but have not yet shipped.
         attribute?(:unfilled_customer_ordered_units, Integer, from: "unfilledCustomerOrderedUnits")
 
         # @return [Money] The cost of the excess inventory on the last day of the selected time window based on
-        # forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
-        # that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
+        #   forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
+        #   that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
         attribute?(:unhealthy_inventory_cost, Money, from: "unhealthyInventoryCost")
 
         # @return [Integer] The number of excess inventory units on the last day of the selected time window based on
-        # forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
-        # that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
+        #   forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
+        #   that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
         attribute?(:unhealthy_inventory_units, Integer, from: "unhealthyInventoryUnits")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is in unsellable condition on the
-        # last day of the selected time window.
+        #   last day of the selected time window.
         attribute?(:unsellable_on_hand_inventory_cost, Money, from: "unsellableOnHandInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that are in unsellable condition on the
-        # last day of the selected time window.
+        #   last day of the selected time window.
         attribute?(:unsellable_on_hand_inventory_units, Integer, from: "unsellableOnHandInventoryUnits")
 
         # @return [Float] The number of units that were confirmed by the vendor, divided by the number of units Amazon
-        # asked for. This rate will be 1 if all units that were requested during this time window were confirmed. This
-        # rate can be larger than 1 if the vendor has confirmed a greater quantity of units than Amazon requested.
+        #   asked for. This rate will be 1 if all units that were requested during this time window were confirmed. This
+        #   rate can be larger than 1 if the vendor has confirmed a greater quantity of units than Amazon requested.
         attribute?(:vendor_confirmation_rate, Float, from: "vendorConfirmationRate")
       end
     end

data/lib/peddler/reports/vendor_inventory/inventory_by_asin.rb

@@ -17,77 +17,77 @@ module Peddler
         attribute(:end_date, Date, from: "endDate")
 
         # @return [Money] Cost of the inventory that Amazon received from the vendor, minus the cost of the inventory
-        # that was returned to the vendor. The cost returned to the vendor takes into account any products that were
-        # returned due to damaged merchandise. This number can be negative if more cost was returned than received.
+        #   that was returned to the vendor. The cost returned to the vendor takes into account any products that were
+        #   returned due to damaged merchandise. This number can be negative if more cost was returned than received.
         attribute(:net_received_inventory_cost, Money, from: "netReceivedInventoryCost")
 
         # @return [Integer] Units received from the vendor minus any units that were returned to the vendor. This number
-        # can be negative if more units were returned than received.
+        #   can be negative if more units were returned than received.
         attribute(:net_received_inventory_units, Integer, from: "netReceivedInventoryUnits")
 
         # @return [Integer] Number of units contained in Amazon’s confirmed purchase orders that are not yet received by
-        # Amazon. This number can be negative if the vendor has shipped more units than Amazon has requested.
+        #   Amazon. This number can be negative if the vendor has shipped more units than Amazon has requested.
         attribute(:open_purchase_order_units, Integer, from: "openPurchaseOrderUnits")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is in sellable condition on the
-        # last day of the selected time window. Backorders count as negative cost, and can cause this value to be
-        # negative overall.
+        #   last day of the selected time window. Backorders count as negative cost, and can cause this value to be
+        #   negative overall.
         attribute(:sellable_on_hand_inventory_cost, Money, from: "sellableOnHandInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that is in sellable condition on the last
-        # day of the selected time window. Backorders count as negative units, and can cause this value to be negative
-        # overall.
+        #   day of the selected time window. Backorders count as negative units, and can cause this value to be negative
+        #   overall.
         attribute(:sellable_on_hand_inventory_units, Integer, from: "sellableOnHandInventoryUnits")
 
         # @return [Date] The start date of the aggregated data.
         attribute(:start_date, Date, from: "startDate")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is at least 90 days old, and is
-        # in a sellable condition on the last day of the selected time window. Backorders count as a negative cost, and
-        # can cause this value to be negative overall. Inventory age is computed based on when the inventory was
-        # received by Amazon.
+        #   in a sellable condition on the last day of the selected time window. Backorders count as a negative cost,
+        #   and can cause this value to be negative overall. Inventory age is computed based on when the inventory was
+        #   received by Amazon.
         attribute?(:aged90_plus_days_sellable_inventory_cost, Money, from: "aged90PlusDaysSellableInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that is at least 90 days old, and is in a
-        # sellable condition on the last day of the selected time window. Backorders count as negative units, and can
-        # cause this value to be negative overall. Inventory age is computed based on when the inventory was received by
-        # Amazon.
+        #   sellable condition on the last day of the selected time window. Backorders count as negative units, and can
+        #   cause this value to be negative overall. Inventory age is computed based on when the inventory was received
+        #   by Amazon.
         attribute?(:aged90_plus_days_sellable_inventory_units, Integer, from: "aged90PlusDaysSellableInventoryUnits")
 
         # @return [Float] Average number of days between the submission of each purchase order unit and the time of
-        # receipt in Amazon's fulfillment centers.
+        #   receipt in Amazon's fulfillment centers.
         attribute?(:average_vendor_lead_time_days, Float, from: "averageVendorLeadTimeDays")
 
         # @return [Float] The number of units shipped (less customer returns), divided by the sum of the number of units
-        # held by Amazon at the beginning of this time window and the number of units received during this time window.
-        # This number could be negative if more units were returned than were shipped. This number can be greater than 1
-        # if some inventory was sold while in transit between fulfillment centers.
+        #   held by Amazon at the beginning of this time window and the number of units received during this time
+        #   window. This number could be negative if more units were returned than were shipped. This number can be
+        #   greater than 1 if some inventory was sold while in transit between fulfillment centers.
         attribute?(:sell_through_rate, Float, from: "sellThroughRate")
 
         # @return [Integer] Number of units that have been ordered (or pre-ordered) but have not yet shipped.
         attribute?(:unfilled_customer_ordered_units, Integer, from: "unfilledCustomerOrderedUnits")
 
         # @return [Money] The cost of the excess inventory on the last day of the selected time window based on
-        # forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
-        # that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
+        #   forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
+        #   that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
         attribute?(:unhealthy_inventory_cost, Money, from: "unhealthyInventoryCost")
 
         # @return [Integer] The number of excess inventory units on the last day of the selected time window based on
-        # forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
-        # that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
+        #   forecasted demand. Note that the forecasted demand may have already included some amount of excess inventory
+        #   that makes economic sense to hold. This is the amount of inventory beyond the forecasted demand.
         attribute?(:unhealthy_inventory_units, Integer, from: "unhealthyInventoryUnits")
 
         # @return [Money] The cost of the inventory in Amazon fulfillment centers that is in unsellable condition on the
-        # last day of the selected time window.
+        #   last day of the selected time window.
         attribute?(:unsellable_on_hand_inventory_cost, Money, from: "unsellableOnHandInventoryCost")
 
         # @return [Integer] The number of units in Amazon fulfillment centers that are in unsellable condition on the
-        # last day of the selected time window.
+        #   last day of the selected time window.
         attribute?(:unsellable_on_hand_inventory_units, Integer, from: "unsellableOnHandInventoryUnits")
 
         # @return [Float] The number of units that were confirmed by the vendor, divided by the number of units Amazon
-        # asked for. This rate will be 1 if all units that were requested during this time window were confirmed. This
-        # rate can be larger than 1 if the vendor has confirmed a greater quantity of units than Amazon requested.
+        #   asked for. This rate will be 1 if all units that were requested during this time window were confirmed. This
+        #   rate can be larger than 1 if the vendor has confirmed a greater quantity of units than Amazon requested.
         attribute?(:vendor_confirmation_rate, Float, from: "vendorConfirmationRate")
       end
     end

data/lib/peddler/reports/vendor_inventory/report.rb

@@ -20,7 +20,7 @@ module Peddler
         attribute(:inventory_by_asin, [InventoryByASIN], from: "inventoryByAsin")
 
         # @return [Hash] The report summary including a reporting date range, distributor view, selling program, and
-        # last updated date in the input.
+        #   last updated date in the input.
         attribute(:report_specification, ReportSpecification, from: "reportSpecification")
       end
     end

data/lib/peddler/reports/vendor_inventory/report_options.rb

@@ -13,7 +13,7 @@ module Peddler
         attribute(:distributor_view, String, from: "distributorView")
 
         # @return [String] Determines what granularity of data is expected in the report. Valid values are: DAY, WEEK,
-        # MONTH, QUARTER, YEAR.
+        #   MONTH, QUARTER, YEAR.
         attribute(:report_period, String, from: "reportPeriod")
 
         # @return [String] The selling program.

data/lib/peddler/reports/vendor_inventory/report_specification.rb

@@ -12,25 +12,25 @@ module Peddler
       # the input.
       ReportSpecification = Structure.new do
         # @return [Date] Determines the end date of the report - the time component is ignored. For WEEK, MONTH,
-        # QUARTER, and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod. For
-        # example, dataEndTime must be a Saturday for the WEEK reportPeriod.
+        #   QUARTER, and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod.
+        #   For example, dataEndTime must be a Saturday for the WEEK reportPeriod.
         attribute(:data_end_time, Date, from: "dataEndTime")
 
         # @return [Date] Determines the start date of the report - the time component is ignored. For WEEK, MONTH,
-        # QUARTER, and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod.
-        # For example, dataStartTime must be a Sunday for the WEEK reportPeriod.
+        #   QUARTER, and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod.
+        #   For example, dataStartTime must be a Sunday for the WEEK reportPeriod.
         attribute(:data_start_time, Date, from: "dataStartTime")
 
         # @return [Date] The date when the report was last updated. Follows the
-        # {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
+        #   {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
         attribute(:last_updated_date, Date, from: "lastUpdatedDate")
 
         # @return [Array<String>] This parameter must match the marketplaceId of the selling partner account (each
-        # selling partner account belongs to only one marketplaceId).
+        #   selling partner account belongs to only one marketplaceId).
         attribute(:marketplace_ids, [String], from: "marketplaceIds")
 
         # @return [ReportOptions] Report options specifying parameters such as reportPeriod, distributorView, and
-        # sellingProgram.
+        #   sellingProgram.
         attribute(:report_options, ReportOptions, from: "reportOptions")
 
         # @return [String] The type of report.

data/lib/peddler/reports/vendor_net_pure_product_margin/net_pure_product_margin_aggregate_details.rb

@@ -14,8 +14,8 @@ module Peddler
         attribute(:end_date, Date, from: "endDate")
 
         # @return [Float] A measure of Amazon's profitability considering Amazon's wholesale cost and vendor-funded
-        # cooperative marketing funds: (Product Revenue – Product COGS – Vendor Funded Coop) / Product Revenue. The
-        # value is a fraction with values between 0 and 1. To represent as a percentage, multiply the value by 100.
+        #   cooperative marketing funds: (Product Revenue – Product COGS – Vendor Funded Coop) / Product Revenue. The
+        #   value is a fraction with values between 0 and 1. To represent as a percentage, multiply the value by 100.
         attribute(:net_pure_product_margin, Float, from: "netPureProductMargin")
 
         # @return [Date] The start date of the aggregated data.

data/lib/peddler/reports/vendor_net_pure_product_margin/net_pure_product_margin_details_by_asin.rb

@@ -17,8 +17,8 @@ module Peddler
         attribute(:end_date, Date, from: "endDate")
 
         # @return [Float] A measure of Amazon's profitability considering Amazon's wholesale cost and vendor-funded
-        # cooperative marketing funds: (Product Revenue – Product COGS – Vendor Funded Coop) / Product Revenue. The
-        # value is a fraction with values between 0 and 1. To represent as a percentage, multiply the value by 100.
+        #   cooperative marketing funds: (Product Revenue – Product COGS – Vendor Funded Coop) / Product Revenue. The
+        #   value is a fraction with values between 0 and 1. To represent as a percentage, multiply the value by 100.
         attribute(:net_pure_product_margin, Float, from: "netPureProductMargin")
 
         # @return [Date] The start date of the aggregated ASIN-level data.

data/lib/peddler/reports/vendor_net_pure_product_margin/report.rb

@@ -19,7 +19,7 @@ module Peddler
         attribute(:net_pure_product_margin_by_asin, [NetPureProductMarginDetailsByASIN], from: "netPureProductMarginByAsin")
 
         # @return [Hash] The report summary including the specified reporting date range and the last updated date in
-        # the input.
+        #   the input.
         attribute(:report_specification, ReportSpecification, from: "reportSpecification")
       end
     end

data/lib/peddler/reports/vendor_net_pure_product_margin/report_options.rb

@@ -10,7 +10,7 @@ module Peddler
       # Report options specifying parameters such as reportPeriod.
       ReportOptions = Structure.new do
         # @return [String] Determines the period by which data in the report is aggregated. Valid values are: DAY, WEEK,
-        # MONTH, QUARTER, YEAR.
+        #   MONTH, QUARTER, YEAR.
         attribute(:report_period, String, from: "reportPeriod")
       end
     end

data/lib/peddler/reports/vendor_net_pure_product_margin/report_specification.rb

@@ -11,21 +11,21 @@ module Peddler
       # The report summary including the specified reporting date range and the last updated date in the input.
       ReportSpecification = Structure.new do
         # @return [Date] Determines the end date of the report - the time component is ignored. For WEEK, MONTH, QUARTER
-        # and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod. For example,
-        # dataEndTime must be a Saturday for the WEEK reportPeriod.
+        #   and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod. For
+        #   example, dataEndTime must be a Saturday for the WEEK reportPeriod.
         attribute(:data_end_time, Date, from: "dataEndTime")
 
         # @return [Date] Determines the start date of the report - the time component is ignored. For WEEK, MONTH,
-        # QUARTER and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod. For
-        # example, dataStartTime must be a Sunday for the WEEK reportPeriod.
+        #   QUARTER and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod.
+        #   For example, dataStartTime must be a Sunday for the WEEK reportPeriod.
         attribute(:data_start_time, Date, from: "dataStartTime")
 
         # @return [Date] The date when the report was last updated. Follows the
-        # {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
+        #   {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
         attribute(:last_updated_date, Date, from: "lastUpdatedDate")
 
         # @return [Array<String>] This parameter must match the marketplaceId of the vendor account. Each vendor account
-        # belongs to only one marketplaceId.
+        #   belongs to only one marketplaceId.
         attribute(:marketplace_ids, [String], from: "marketplaceIds")
 
         # @return [ReportOptions] Report options specifying parameters such as reportPeriod.

data/lib/peddler/reports/vendor_real_time_inventory/report_data.rb

@@ -17,8 +17,8 @@ module Peddler
         attribute(:end_time, Time, from: "endTime")
 
         # @return [Integer] The number of units available to be sold on the website, based on units in Amazon
-        # fulfillment centers that are in sellable condition less units in customer shopping carts or otherwise bound
-        # for other orders (e.g. known subscribe-and-save orders).
+        #   fulfillment centers that are in sellable condition less units in customer shopping carts or otherwise bound
+        #   for other orders (e.g. known subscribe-and-save orders).
         attribute(:highly_available_inventory, Integer, from: "highlyAvailableInventory")
 
         # @return [Time] The start of a date-time range in UTC representing the beginning of the hour for this object.

data/lib/peddler/reports/vendor_real_time_inventory/report_specification.rb

@@ -11,11 +11,11 @@ module Peddler
       # Summarizes the original report request.
       ReportSpecification = Structure.new do
         # @return [Time] The end of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range. End time should not be more than 24 hours from the start time.
+        #   all full hours that fall within the range. End time should not be more than 24 hours from the start time.
         attribute(:data_end_time, Time, from: "dataEndTime")
 
         # @return [Time] The start of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range. Start time can be up to 168 hours before the time of the request.
+        #   all full hours that fall within the range. Start time can be up to 168 hours before the time of the request.
         attribute(:data_start_time, Time, from: "dataStartTime")
 
         # @return [Array<String>] Marketplace IDs as specified in the report request.

data/lib/peddler/reports/vendor_real_time_sales/report_data.rb

@@ -17,11 +17,11 @@ module Peddler
         attribute(:end_time, Time, from: "endTime")
 
         # @return [Float] Ordered Product Sales in the specified hour as of the time the report is generated.
-        # Adjustments are made for cancellations.
+        #   Adjustments are made for cancellations.
         attribute(:ordered_revenue, Float, from: "orderedRevenue")
 
         # @return [Integer] Number of units ordered by Amazon customers. This number can be negative if there are more
-        # cancellations than orders.
+        #   cancellations than orders.
         attribute(:ordered_units, Integer, from: "orderedUnits")
 
         # @return [Time] The start of a date-time range in UTC representing the beginning of the hour for this object.

data/lib/peddler/reports/vendor_real_time_sales/report_specification.rb

@@ -11,11 +11,11 @@ module Peddler
       # Summarizes the original report request.
       ReportSpecification = Structure.new do
         # @return [Time] The end of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range.
+        #   all full hours that fall within the range.
         attribute(:data_end_time, Time, from: "dataEndTime")
 
         # @return [Time] The start of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range.
+        #   all full hours that fall within the range.
         attribute(:data_start_time, Time, from: "dataStartTime")
 
         # @return [Array<String>] Marketplace IDs as specified in the report request.

data/lib/peddler/reports/vendor_real_time_traffic/report_specification.rb

@@ -11,12 +11,12 @@ module Peddler
       # Summarizes the original report request.
       ReportSpecification = Structure.new do
         # @return [Time] The end of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range. End time should be at least 60 minutes earlier than the time of the
-        # request.
+        #   all full hours that fall within the range. End time should be at least 60 minutes earlier than the time of
+        #   the request.
         attribute(:data_end_time, Time, from: "dataEndTime")
 
         # @return [Time] The start of a date-time range in UTC used to determine hours to report on. Output will include
-        # all full hours that fall within the range.
+        #   all full hours that fall within the range.
         attribute(:data_start_time, Time, from: "dataStartTime")
 
         # @return [Array<String>] Marketplace IDs as specified in the report request.

data/lib/peddler/reports/vendor_sales/report.rb

@@ -12,7 +12,7 @@ module Peddler
       # levels: DAY, WEEK, MONTH, QUARTER, YEAR. Requests can span multiple date range periods.
       Report = Structure.new do
         # @return [Hash] The report summary including reporting date range, distributor view, selling program, and last
-        # updated date in the input.
+        #   updated date in the input.
         attribute(:report_specification, ReportSpecification, from: "reportSpecification")
 
         # @return [Array<SalesAggregate>]

data/lib/peddler/reports/vendor_sales/report_options.rb

@@ -13,7 +13,7 @@ module Peddler
         attribute(:distributor_view, String, from: "distributorView")
 
         # @return [String] Determines what granularity of data is expected in the report. Valid values are: DAY, WEEK,
-        # MONTH, QUARTER, YEAR.
+        #   MONTH, QUARTER, YEAR.
         attribute(:report_period, String, from: "reportPeriod")
 
         # @return [String] The selling program.

data/lib/peddler/reports/vendor_sales/report_specification.rb

@@ -12,25 +12,25 @@ module Peddler
       # the input.
       ReportSpecification = Structure.new do
         # @return [Date] Determines the end date of the report - the time component is ignored. For WEEK, MONTH,
-        # QUARTER, and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod. For
-        # example, dataEndTime must be a Saturday for the WEEK reportPeriod.
+        #   QUARTER, and YEAR reportPeriods, this value must correspond to the last day in the specified reportPeriod.
+        #   For example, dataEndTime must be a Saturday for the WEEK reportPeriod.
         attribute(:data_end_time, Date, from: "dataEndTime")
 
         # @return [Date] Determines the start date of the report - the time component is ignored. For WEEK, MONTH,
-        # QUARTER, and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod.
-        # For example, dataStartTime must be a Sunday for the WEEK reportPeriod.
+        #   QUARTER, and YEAR reportPeriods, this value must correspond to the first day in the specified reportPeriod.
+        #   For example, dataStartTime must be a Sunday for the WEEK reportPeriod.
         attribute(:data_start_time, Date, from: "dataStartTime")
 
         # @return [Date] The date when the report was last updated. Follows the
-        # {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
+        #   {https://developer-docs.amazon.com/sp-api/docs/iso-8601 ISO 8601} Date format of YYYY-MM-DD.
         attribute(:last_updated_date, Date, from: "lastUpdatedDate")
 
         # @return [Array<String>] This parameter must match the marketplaceId of the selling partner account. Each
-        # selling partner account belongs to only one marketplaceId.
+        #   selling partner account belongs to only one marketplaceId.
         attribute(:marketplace_ids, [String], from: "marketplaceIds")
 
         # @return [ReportOptions] Report options specifying parameters such as reportPeriod, distributorView, and
-        # sellingProgram.
+        #   sellingProgram.
         attribute(:report_options, ReportOptions, from: "reportOptions")
 
         # @return [String] The report type.

data/lib/peddler/reports/vendor_sales/sales_aggregate.rb

@@ -26,15 +26,15 @@ module Peddler
         attribute(:start_date, Date, from: "startDate")
 
         # @return [Integer] The quantity of units returned. This field is populated when sellingProgram is RETAIL or
-        # BUSINESS.
+        #   BUSINESS.
         attribute?(:customer_returns, Integer, from: "customerReturns")
 
         # @return [Money] Ordered product sales in the selected time frame. Adjustments are made for returns. This field
-        # is populated when distributorView is MANUFACTURING.
+        #   is populated when distributorView is MANUFACTURING.
         attribute?(:ordered_revenue, Money, from: "orderedRevenue")
 
         # @return [Integer] Number of units ordered by Amazon customers. This field is populated when distributorView is
-        # MANUFACTURING.
+        #   MANUFACTURING.
         attribute?(:ordered_units, Integer, from: "orderedUnits")
       end
     end

data/lib/peddler/reports/vendor_sales/sales_by_asin.rb

@@ -29,15 +29,15 @@ module Peddler
         attribute(:start_date, Date, from: "startDate")
 
         # @return [Integer] The quantity of units returned. This field is populated when sellingProgram is RETAIL or
-        # BUSINESS.
+        #   BUSINESS.
         attribute?(:customer_returns, Integer, from: "customerReturns")
 
         # @return [Money] Ordered product sales in the selected time frame. Adjustments are made for returns. This field
-        # is populated when distributorView is MANUFACTURING
+        #   is populated when distributorView is MANUFACTURING
         attribute?(:ordered_revenue, Money, from: "orderedRevenue")
 
         # @return [Integer] Number of units ordered by Amazon customers. This field is populated when distributorView is
-        # MANUFACTURING
+        #   MANUFACTURING
         attribute?(:ordered_units, Integer, from: "orderedUnits")
       end
     end

data/lib/peddler/reports/vendor_traffic/report.rb

@@ -12,7 +12,7 @@ module Peddler
       # date range aggregation levels: DAY, WEEK, MONTH, QUARTER, YEAR. Requests can span multiple date range periods.
       Report = Structure.new do
         # @return [Hash] The report summary including the specified reporting date range and the last updated date in
-        # the input.
+        #   the input.
         attribute(:report_specification, ReportSpecification, from: "reportSpecification")
 
         # @return [Array<TrafficAggregate>]