patient_http 1.1.2 → 1.2.0

data/lib/patient_http/processor.rb

@@ -25,6 +25,12 @@ module PatientHttp
       @lifecycle = LifecycleManager.new
       @queue = Thread::Queue.new
       @reactor_thread = nil
+      # Serializes start/stop so a start cannot interleave with a stop that is
+      # still reaping its reactor thread (and vice versa).
+      @lifecycle_mutex = Mutex.new
+      # Incremented once per reactor run; lets a reactor's teardown detect
+      # whether it is still the current run before mutating shared state.
+      @reactor_generation = 0
       @inflight_requests = Concurrent::Hash.new
       @pending_tasks = Concurrent::Hash.new
       @tasks_lock = Mutex.new
@@ -38,28 +44,64 @@ module PatientHttp
     #
     # @return [void]
     def start
-      @tasks_lock.synchronize do
-        return unless @lifecycle.start!
-      end
+      observers_to_notify = nil
+
+      # Hold the lifecycle mutex across the whole start so a concurrent stop
+      # cannot interleave with (and reap) the reactor thread we are creating.
+      @lifecycle_mutex.synchronize do
+        # Claim this reactor run's generation atomically with the state
+        # transition. The reactor thread captures it below and its teardown
+        # only mutates shared state while it is still the current generation.
+        generation = @tasks_lock.synchronize do
+          return unless @lifecycle.start!
+          @reactor_generation += 1
+        end
 
-      @reactor_thread = Thread.new do
-        Thread.current.name = "patient-http-processor"
-        run_reactor
-      rescue => e
-        @config.logger&.error("[PatientHttp] Processor error: #{e.message}\n#{e.backtrace.join("\n")}")
+        @reactor_thread = Thread.new do
+          Thread.current.name = "patient-http-processor"
+          run_reactor
+        rescue => e
+          @config.logger&.error("[PatientHttp] Processor error: #{e.message}\n#{e.backtrace.join("\n")}")
+
+          raise if PatientHttp.testing?
+        ensure
+          # Mark the processor stopped when the reactor exits and re-enqueue any
+          # tasks still being tracked, so a reactor that exits without a stop()
+          # call (e.g. an unhandled error) does not lose in-flight/pending
+          # requests or leak stale tracking entries into a later run.
+          #
+          # Only act while this is still the current generation: a newer start
+          # (after a stop) owns the processor state and a stale reactor from a
+          # prior run must not clobber it. Snapshot and clear happen under the
+          # lock; re-enqueueing runs outside it. This is idempotent with stop()'s
+          # reenqueue_pending_requests: whichever runs second snapshots an empty
+          # set.
+          orphaned_tasks = @tasks_lock.synchronize do
+            if @reactor_generation == generation
+              drain_tracked_tasks_locked
+            else
+              []
+            end
+          end
+          reenqueue_tasks(orphaned_tasks)
+        end
 
-        raise if PatientHttp.testing?
-      ensure
-        @tasks_lock.synchronize { @lifecycle.stopped! } if @reactor_thread == Thread.current
-      end
+        # The transition can fail if the reactor thread already failed and
+        # marked the processor stopped. Capture the observer snapshot under the
+        # same lock as the transition so an observer registered concurrently via
+        # #observe is notified of start by exactly one path (here or in #observe).
+        started, observers = @tasks_lock.synchronize do
+          [@lifecycle.running!, @observers.dup]
+        end
+        observers_to_notify = observers if started
 
-      @tasks_lock.synchronize do
-        @lifecycle.running!
-        notify_observers { |observer| observer.start }
+        # Block until the reactor is ready
+        @lifecycle.wait_for_reactor(timeout: 5)
       end
 
-      # Block until the reactor is ready
-      @lifecycle.wait_for_reactor
+      # Notify observers outside the lifecycle mutex so an observer callback
+      # that re-enters the processor cannot deadlock.
+      observers_to_notify&.each { |observer| notify_observer(observer) { |o| o.start } }
     end
 
     # Stop the processor.
@@ -68,43 +110,74 @@ module PatientHttp
     # @return [void]
     def stop(timeout: nil)
       timeout ||= @config.shutdown_timeout
+      should_notify_stop = false
+
+      # Hold the lifecycle mutex across the whole stop so a concurrent start
+      # cannot begin (and reassign @reactor_thread) while we are tearing down.
+      @lifecycle_mutex.synchronize do
+        # Atomically transition to stopping and capture the reactor thread for
+        # this run. Joining/killing the captured reference rather than the ivar
+        # means we can never tear down a reactor from a different run.
+        reactor = @tasks_lock.synchronize do
+          return unless @lifecycle.stop!
+          @reactor_thread
+        end
 
-      # Atomically transition to stopping state under lock to ensure consistency
-      # with other state-checking operations
-      @tasks_lock.synchronize do
-        return unless @lifecycle.stop!
-      end
+        # Interrupt the reactor's queue wait by pushing a sentinel value
+        @queue.push(nil)
 
-      # Interrupt the reactor's queue wait by pushing a sentinel value
-      @queue.push(nil)
+        # Wait for in-flight and pending requests to complete.
+        # Queue items are not checked here — they will be re-enqueued by
+        # reenqueue_remaining_queue_items after the reactor thread exits.
+        if timeout > 0
+          deadline = monotonic_time + timeout
+          @tasks_lock.synchronize do
+            loop do
+              break if @pending_tasks.empty? && @inflight_requests.empty?
+              remaining = deadline - monotonic_time
+              break if remaining <= 0
+              @idle_condition.wait(@tasks_lock, remaining)
+            end
+          end
+        end
 
-      # Wait for in-flight and pending requests to complete.
-      # Queue items are not checked here — they will be re-enqueued by
-      # reenqueue_remaining_queue_items after the reactor thread exits.
-      if timeout > 0
-        deadline = monotonic_time + timeout
-        @tasks_lock.synchronize do
-          loop do
-            break if @pending_tasks.empty? && @inflight_requests.empty?
-            remaining = deadline - monotonic_time
-            break if remaining <= 0
-            @idle_condition.wait(@tasks_lock, remaining)
+        reenqueue_pending_requests
+
+        # Reap the reactor thread — unless stop was called from the reactor
+        # thread itself (e.g. from a task callback or observer), where joining
+        # the current thread would raise ThreadError. In that case the reactor
+        # exits on its own once the callback returns (its loop sees the stopped
+        # state) and its ensure block performs the same cleanup.
+        if reactor && !reactor.equal?(Thread.current)
+          reactor.join(1) if reactor.alive?
+          if reactor.alive?
+            reactor.kill
+            # Wait for the killed thread's ensure blocks so a stale lifecycle
+            # transition cannot fire during a subsequent start.
+            reactor.join(1)
           end
         end
-      end
+        @tasks_lock.synchronize do
+          @reactor_thread = nil if @reactor_thread.equal?(reactor)
+        end
 
-      reenqueue_pending_requests
+        # Run a second pass now that the reactor has exited to catch any task
+        # that slipped into pending/in-flight tracking after the first snapshot
+        # (a task can be popped from the queue but not yet tracked when the
+        # snapshot is taken).
+        reenqueue_pending_requests
 
-      @reactor_thread.join(1) if @reactor_thread&.alive?
-      @reactor_thread.kill if @reactor_thread&.alive?
-      @reactor_thread = nil
+        # Drain any items left in the queue after the reactor has exited.
+        # This must happen after the reactor thread is done to avoid consuming
+        # the nil sentinel that wakes the reactor.
+        reenqueue_remaining_queue_items
 
-      # Drain any items left in the queue after the reactor has exited.
-      # This must happen after the reactor thread is done to avoid consuming
-      # the nil sentinel that wakes the reactor.
-      reenqueue_remaining_queue_items
+        should_notify_stop = true
+      end
 
-      notify_observers { |observer| observer.stop }
+      # Notify observers outside the lifecycle mutex so an observer callback
+      # that re-enters the processor cannot deadlock.
+      notify_observers { |observer| observer.stop } if should_notify_stop
     end
 
     # Drain the processor (stop accepting new requests).
@@ -125,18 +198,24 @@ module PatientHttp
     # @raise [MaxCapacityError] if at max capacity
     # @return [void]
     def enqueue(task)
+      at_capacity = false
+
       @tasks_lock.synchronize do
         raise NotRunningError.new("Cannot enqueue request: processor is #{state}") unless running?
 
         # Check capacity - raise error if at max connections
         total = @queue.size + @pending_tasks.size + @inflight_requests.size
         if total >= @config.max_connections
-          notify_observers { |observer| observer.capacity_exceeded }
-          raise MaxCapacityError.new("Cannot enqueue request: already at max capacity (#{@config.max_connections} connections)")
+          at_capacity = true
+        else
+          task.enqueued!
+          @queue.push(task)
         end
+      end
 
-        task.enqueued!
-        @queue.push(task)
+      if at_capacity
+        notify_observers { |observer| observer.capacity_exceeded }
+        raise MaxCapacityError.new("Cannot enqueue request: already at max capacity (#{@config.max_connections} connections)")
       end
     end
 
@@ -233,12 +312,19 @@ module PatientHttp
     # @param observer [ProcessorObserver] the observer to add
     # @return [void]
     def observe(observer)
+      notify_start = false
+
       @tasks_lock.synchronize do
         raise ArgumentError.new("Observer already added") if @observers.include?(observer)
 
         @observers << observer
-        observer.start if starting? || running?
+        # Only self-notify when already running. An observer added while the
+        # processor is still starting is picked up by start's atomic observer
+        # snapshot, so notifying here too would deliver start twice.
+        notify_start = running?
       end
+
+      notify_observer(observer) { |o| o.start } if notify_start
     end
 
     # Wait for the processor to start.
@@ -323,6 +409,22 @@ module PatientHttp
           end
         end
 
+        # Wait for in-flight request fibers to finish so responses that
+        # complete during the graceful shutdown window are delivered before
+        # the connection pools are closed below. Transient tasks (such as the
+        # connection pools' gardener tasks) are excluded; they are shut down
+        # by closing the HTTP client.
+        loop do
+          children = task.children&.to_a&.reject(&:transient?)
+          break if children.nil? || children.empty?
+
+          children.each do |child|
+            child.wait
+          rescue => e
+            @config.logger&.error("[PatientHttp] Error waiting for in-flight request: #{e.inspect}")
+          end
+        end
+
         @config.logger&.info("[PatientHttp] Processor stopped")
       rescue Async::Stop
         @config.logger&.info("[PatientHttp] Reactor received stop signal")
@@ -358,8 +460,12 @@ module PatientHttp
     # @param task [RequestTask] the request task to process
     # @return [void]
     def process_request(task)
-      # Move from pending to in-flight tracking
+      # Move from pending to in-flight tracking. If the shutdown deadline has
+      # already passed, the shutdown sequence re-enqueues the task, so leave
+      # it in pending tracking and don't execute it.
       @tasks_lock.synchronize do
+        return if stopped?
+
         @pending_tasks.delete(task.id)
         @inflight_requests[task.id] = task
       end
@@ -368,50 +474,82 @@ module PatientHttp
 
       # Mark task as started
       task.started!
-      response_handled = false
+      claimed = false
 
       begin
         response_data = @http_client.make_request(task.request, task.id)
 
-        # Return early because the body many not have been fully read.
-        return if stopping? || stopped?
+        # If the shutdown deadline passed while the request was in flight, the
+        # shutdown sequence has re-enqueued the task; discard the response.
+        return if stopped?
 
-        # Check for redirect handling
+        # Check for redirect handling. handle_redirect claims the task itself
+        # (atomically with enqueueing the redirect) and returns whether this
+        # caller owns delivery, so the ensure block can finish the task.
         if should_follow_redirect?(task, response_data)
-          handle_redirect(task, response_data)
-          response_handled = true
+          claimed = handle_redirect(task, response_data)
           return
         end
 
         response = task.build_response(**response_data)
-        if task.raise_error_responses && !response.success?
-          http_error = HttpError.new(response)
-          notify_observers { |observer| observer.request_error(http_error) }
-          handle_error(task, http_error)
-        else
-          handle_completion(task, response)
+        claimed = claim_task(task)
+        if claimed
+          if task.raise_error_responses && !response.success?
+            http_error = HttpError.new(response)
+            notify_observers { |observer| observer.request_error(http_error) }
+            handle_error(task, http_error)
+          else
+            handle_completion(task, response)
+          end
         end
-
-        response_handled = true
+      rescue ResponseReader::ReadAbortedError
+        # The processor stopped past its shutdown deadline while the response
+        # body was being read. The shutdown sequence re-enqueues the task, so
+        # there is nothing to deliver.
+        nil
       rescue => e
-        notify_observers { |observer| observer.request_error(e) }
-        handle_error(task, e)
-        response_handled = true
+        # A failure raised after the task was claimed came from the delivery
+        # attempt itself (only reachable in testing mode; the delivery helpers
+        # rescue their own failures in production). Re-raise rather than
+        # claiming again — claimed must stay true so the ensure block still
+        # finishes the task.
+        raise if claimed
+
+        claimed = claim_task(task)
+        if claimed
+          notify_observers { |observer| observer.request_error(e) }
+          handle_error(task, e)
+        end
       ensure
-        cleanup_after_task(task, response_handled)
-        @testing_callback&.call(task) if PatientHttp.testing?
+        finish_task(task) if claimed
+        # Only fire the testing hook for tasks this caller actually owns.
+        # A task discarded during shutdown (claimed == false) is re-enqueued
+        # by the shutdown sequence, not processed here.
+        @testing_callback&.call(task) if claimed && PatientHttp.testing?
       end
     end
 
-    # Cleanup after request processing.
+    # Atomically take ownership of delivering a task's result by removing it
+    # from in-flight tracking.
+    #
+    # Returns false when the task has already been claimed by the shutdown
+    # sequence (re-enqueued for retry), in which case the result must not be
+    # delivered.
     #
     # @param task [RequestTask] the request task
-    # @return [void]
-    def cleanup_after_task(task, response_handled)
-      return if (stopping? || stopped?) && !response_handled
+    # @return [Boolean] true if this caller owns delivery of the task's result
+    def claim_task(task)
+      @tasks_lock.synchronize do
+        !@inflight_requests.delete(task.id).nil?
+      end
+    end
 
+    # Signal idle waiters and notify observers after a claimed task finishes.
+    #
+    # @param task [RequestTask] the request task
+    # @return [void]
+    def finish_task(task)
       @tasks_lock.synchronize do
-        @inflight_requests.delete(task.id)
         if @pending_tasks.empty? && @inflight_requests.empty?
           @idle_condition.broadcast
         end
@@ -419,30 +557,37 @@ module PatientHttp
       notify_observers { |observer| observer.request_end(task) }
     end
 
-    # Handle successful response.
+    # Handle successful response. The caller must have claimed the task via
+    # {#claim_task} so the result is delivered exactly once.
     #
     # @param task [RequestTask] the request task
     # @param response [Response] the response object
     # @return [void]
     def handle_completion(task, response)
-      if stopped?
-        @config.logger&.warn("[PatientHttp] Request #{task.id} succeeded after processor was stopped")
-        return
-      end
-
       task.completed!(response)
 
       @config.logger&.debug(
         "[PatientHttp] Request #{task.id} succeeded with status #{response.status}, " \
         "enqueued callback #{task.callback}"
       )
+    rescue => e
+      @config.logger&.error(
+        "[PatientHttp] Failed to enqueue completion callback for request #{task.id}: #{e.class} - #{e.message}"
+      )
+      raise if PatientHttp.testing?
     end
 
     # Handle a redirect response.
     #
+    # Claims the task before delivering an error or enqueueing the redirect so
+    # the result is delivered exactly once. When following a redirect, the
+    # original task is removed from in-flight tracking and the redirect task is
+    # pushed onto the queue within a single {@tasks_lock} section, so a
+    # concurrent {#idle?} never observes a moment where neither is tracked.
+    #
     # @param task [RequestTask] the request task
     # @param response_data [Hash] the response data with status, headers, body
-    # @return [void]
+    # @return [Boolean] true if this caller owns delivery of the task's result
     def handle_redirect(task, response_data)
       status = response_data[:status]
       location = response_data[:headers]["location"]
@@ -450,31 +595,39 @@ module PatientHttp
       # Check for redirect errors
       error = check_redirect_error(task, response_data)
       if error
+        return false unless claim_task(task)
+
         notify_observers { |observer| observer.request_error(error) }
         handle_error(task, error)
-        return
+        return true
       end
 
-      # Create redirect task and enqueue it
+      # Create the redirect task, then atomically claim the original (remove it
+      # from in-flight) and enqueue the redirect. If the claim fails the
+      # shutdown sequence already re-enqueued the original, so drop the redirect.
       redirect_task = task.redirect_task(location: location, status: status)
       redirect_task.enqueued!
-      @queue.push(redirect_task)
+
+      claimed = @tasks_lock.synchronize do
+        next false if @inflight_requests.delete(task.id).nil?
+
+        @queue.push(redirect_task)
+        true
+      end
+      return false unless claimed
 
       redirect_url = resolve_redirect_url(task.request.url, location)
       @config.logger&.debug("[PatientHttp] Request #{task.id} redirected (#{status}) to #{redirect_url}")
+      true
     end
 
-    # Handle error response.
+    # Handle error response. The caller must have claimed the task via
+    # {#claim_task} so the result is delivered exactly once.
     #
     # @param task [RequestTask] the request task
     # @param exception [Exception] the exception
     # @return [void]
     def handle_error(task, exception)
-      if stopped?
-        @config.logger&.warn("[PatientHttp] Request #{task.id} failed after processor was stopped")
-        return
-      end
-
       task.error!(exception)
 
       @config.logger&.warn(
@@ -488,29 +641,54 @@ module PatientHttp
       raise if PatientHttp.testing?
     end
 
+    # Notify all observers of an event. Observers are called outside of any
+    # internal lock so they can safely call back into the processor.
     def notify_observers(&block)
-      @observers.each do |observer|
-        yield(observer)
-      rescue => e
-        @config.logger&.error(
-          "[PatientHttp] Observer #{observer.class.name} error: #{e.class} - #{e.message}"
-        )
-        raise e if PatientHttp.testing?
+      observers = @tasks_lock.synchronize { @observers.dup }
+      observers.each do |observer|
+        notify_observer(observer, &block)
       end
     end
 
+    def notify_observer(observer)
+      yield(observer)
+    rescue => e
+      @config.logger&.error(
+        "[PatientHttp] Observer #{observer.class.name} error: #{e.class} - #{e.message}"
+      )
+      raise e if PatientHttp.testing?
+    end
+
     def reenqueue_pending_requests
-      # Re-enqueue any remaining in-flight, pending, and queued tasks
-      tasks_to_reenqueue = []
-      @tasks_lock.synchronize do
-        # Now that we have the lock again, atomically transition to stopped and clear collections
-        @lifecycle.stopped!
-        tasks_to_reenqueue = @inflight_requests.values + @pending_tasks.values
-        @inflight_requests.clear
-        @pending_tasks.clear
-      end
+      reenqueue_tasks(drain_tracked_tasks)
+    end
 
-      reenqueue_tasks(tasks_to_reenqueue)
+    # Atomically transition to stopped and remove all tracked (in-flight and
+    # pending) tasks, returning them so the caller can re-enqueue them.
+    #
+    # Acquires {@tasks_lock}; callers must NOT already hold it. Use
+    # {#drain_tracked_tasks_locked} when the lock is already held.
+    #
+    # @return [Array<RequestTask>] the tasks that were being tracked
+    def drain_tracked_tasks
+      @tasks_lock.synchronize { drain_tracked_tasks_locked }
+    end
+
+    # Transition to stopped and remove all tracked tasks. Must be called with
+    # {@tasks_lock} held.
+    #
+    # @return [Array<RequestTask>] the tasks that were being tracked
+    def drain_tracked_tasks_locked
+      @lifecycle.stopped!
+      tasks = @inflight_requests.values + @pending_tasks.values
+      @inflight_requests.clear
+      @pending_tasks.clear
+      # Wake any stop() thread blocked on the idle condition. Without this, a
+      # reactor-side drain (e.g. after a crash during shutdown) would clear the
+      # tracking hashes without signalling, leaving stop() asleep until its
+      # full timeout elapses.
+      @idle_condition.broadcast
+      tasks
     end
 
     def reenqueue_remaining_queue_items
@@ -532,7 +710,10 @@ module PatientHttp
     def reenqueue_tasks(tasks_to_reenqueue)
       tasks_to_reenqueue.each do |task|
         task.retry
-        notify_observers { |observer| observer.request_end(task) }
+        # Only emit request_end for tasks that actually started, so observers
+        # that pair request_start/request_end (e.g. an in-flight gauge) stay
+        # balanced. Queued-but-never-started tasks emit neither.
+        notify_observers { |observer| observer.request_end(task) } if task.started?
 
         @config.logger&.info(
           "[PatientHttp] Retrying incomplete request #{task.id}"

data/lib/patient_http/redirect_error.rb

@@ -25,8 +25,13 @@ module PatientHttp
       #
       # @param hash [Hash] hash representation
       # @return [RedirectError] reconstructed error
+      # @raise [ArgumentError] if the serialized error class is not a RedirectError
       def load(hash)
         error_class = ClassHelper.resolve_class_name(hash["error_class"])
+        unless error_class.is_a?(Class) && error_class <= RedirectError
+          raise ArgumentError.new("Invalid redirect error class: #{hash["error_class"].inspect}")
+        end
+
         error_class.new(
           url: hash["url"],
           http_method: hash["http_method"]&.to_sym,

data/lib/patient_http/request.rb

@@ -38,6 +38,10 @@ module PatientHttp
     #   secret references, kept out of the serialized URL and resolved at send time
     attr_reader :secret_params
 
+    # @return [Array<String>] Names of preprocessors registered on the configuration
+    #   to apply to the request when it is sent
+    attr_reader :preprocessors
+
     class << self
       # Reconstruct a Request from a hash
       #
@@ -51,7 +55,8 @@ module PatientHttp
           body: Payload.load(hash["body"])&.value,
           params: load_secret_params(hash["secret_params"]),
           timeout: hash["timeout"],
-          max_redirects: hash["max_redirects"]
+          max_redirects: hash["max_redirects"],
+          preprocessors: hash["preprocessors"]
         )
       end
 
@@ -84,6 +89,8 @@ module PatientHttp
     # @param params [Hash, nil] Query parameters to append to the URL.
     # @param timeout [Numeric, nil] Overall timeout in seconds.
     # @param max_redirects [Integer, nil] Maximum redirects to follow (nil uses config, 0 disables).
+    # @param preprocessors [String, Symbol, Array<String, Symbol>, nil] Names of preprocessors
+    #   registered on the configuration to apply to the request when it is sent.
     def initialize(
       http_method,
       url,
@@ -92,7 +99,8 @@ module PatientHttp
       json: nil,
       params: nil,
       timeout: nil,
-      max_redirects: nil
+      max_redirects: nil,
+      preprocessors: nil
     )
       @http_method = http_method.is_a?(String) ? http_method.downcase.to_sym : http_method
 
@@ -102,10 +110,13 @@ module PatientHttp
 
       @secret_params = {}
       @url = normalized_url(url, params)
-      @headers = headers.is_a?(HttpHeaders) ? headers : HttpHeaders.new(headers)
+      # Copy the headers so the request does not share mutable state with the
+      # caller (or with another request when following redirects).
+      @headers = headers.is_a?(HttpHeaders) ? headers.dup : HttpHeaders.new(headers)
       @body = (body == "") ? nil : body
       @timeout = timeout
       @max_redirects = max_redirects
+      @preprocessors = normalized_preprocessors(preprocessors)
 
       if json
         raise ArgumentError.new("Cannot provide both body and json") if @body
@@ -146,6 +157,8 @@ module PatientHttp
         hash["secret_params"] = @secret_params.transform_values(&:as_json)
       end
 
+      hash["preprocessors"] = @preprocessors if @preprocessors.any?
+
       hash
     end
 
@@ -158,6 +171,16 @@ module PatientHttp
       end
     end
 
+    # Normalize preprocessor names to a frozen array of strings.
+    def normalized_preprocessors(preprocessors)
+      names = Array(preprocessors).map(&:to_s)
+      if names.any?(&:empty?)
+        raise ArgumentError.new("preprocessor names cannot be empty")
+      end
+
+      names.freeze
+    end
+
     def normalized_url(url, params)
       uri = url.is_a?(URI::Generic) ? url.dup : URI(url.to_s)
       return uri.to_s unless params&.any?

data/lib/patient_http/request_error.rb

@@ -80,7 +80,7 @@ module PatientHttp
           :timeout
         in OpenSSL::SSL::SSLError
           :ssl
-        in Errno::ECONNREFUSED | Errno::ECONNRESET | Errno::ECONNABORTED | Errno::EHOSTUNREACH | Errno::EPIPE | SocketError | IOError
+        in Errno::ECONNREFUSED | Errno::ECONNRESET | Errno::ECONNABORTED | Errno::EHOSTUNREACH | Errno::ETIMEDOUT | Errno::EPIPE | SocketError | IOError
           :connection
         else
           if exception.is_a?(PatientHttp::ResponseTooLargeError)