passenger 6.0.25 → 6.0.27

data/src/cxx_supportlib/vendor-modified/websocketpp/websocketpp/transport/iostream/connection.hpp

@@ -1,714 +0,0 @@
-/*
- * Copyright (c) 2014, Peter Thorson. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the WebSocket++ Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL PETER THORSON BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef WEBSOCKETPP_TRANSPORT_IOSTREAM_CON_HPP
-#define WEBSOCKETPP_TRANSPORT_IOSTREAM_CON_HPP
-
-#include <websocketpp/transport/iostream/base.hpp>
-
-#include <websocketpp/transport/base/connection.hpp>
-
-#include <websocketpp/uri.hpp>
-
-#include <websocketpp/logger/levels.hpp>
-
-#include <websocketpp/common/connection_hdl.hpp>
-#include <websocketpp/common/memory.hpp>
-#include <websocketpp/common/platforms.hpp>
-
-#include <algorithm>
-#include <iostream>
-#include <sstream>
-#include <string>
-#include <vector>
-
-namespace websocketpp {
-namespace transport {
-namespace iostream {
-
-/// Empty timer class to stub out for timer functionality that iostream
-/// transport doesn't support
-struct timer {
-    void cancel() {}
-};
-
-template <typename config>
-class connection : public lib::enable_shared_from_this< connection<config> > {
-public:
-    /// Type of this connection transport component
-    typedef connection<config> type;
-    /// Type of a shared pointer to this connection transport component
-    typedef lib::shared_ptr<type> ptr;
-
-    /// transport concurrency policy
-    typedef typename config::concurrency_type concurrency_type;
-    /// Type of this transport's access logging policy
-    typedef typename config::alog_type alog_type;
-    /// Type of this transport's error logging policy
-    typedef typename config::elog_type elog_type;
-
-    // Concurrency policy types
-    typedef typename concurrency_type::scoped_lock_type scoped_lock_type;
-    typedef typename concurrency_type::mutex_type mutex_type;
-
-    typedef lib::shared_ptr<timer> timer_ptr;
-
-    explicit connection(bool is_server, const lib::shared_ptr<alog_type> & alog, const lib::shared_ptr<elog_type> & elog)
-      : m_output_stream(NULL)
-      , m_reading(false)
-      , m_is_server(is_server)
-      , m_is_secure(false)
-      , m_alog(alog)
-      , m_elog(elog)
-      , m_remote_endpoint("iostream transport")
-    {
-        m_alog->write(log::alevel::devel,"iostream con transport constructor");
-    }
-
-    /// Get a shared pointer to this component
-    ptr get_shared() {
-        return type::shared_from_this();
-    }
-
-    /// Register a std::ostream with the transport for writing output
-    /**
-     * Register a std::ostream with the transport. All future writes will be
-     * done to this output stream.
-     *
-     * @param o A pointer to the ostream to use for output.
-     */
-    void register_ostream(std::ostream * o) {
-        // TODO: lock transport state?
-        scoped_lock_type lock(m_read_mutex);
-        m_output_stream = o;
-    }
-
-    /// Set uri hook
-    /**
-     * Called by the endpoint as a connection is being established to provide
-     * the uri being connected to to the transport layer.
-     *
-     * This transport policy doesn't use the uri so it is ignored.
-     *
-     * @since 0.6.0
-     *
-     * @param u The uri to set
-     */
-    void set_uri(uri_ptr) {}
-
-    /// Overloaded stream input operator
-    /**
-     * Attempts to read input from the given stream into the transport. Bytes
-     * will be extracted from the input stream to fulfill any pending reads.
-     * Input in this manner will only read until the current read buffer has
-     * been filled. Then it will signal the library to process the input. If the
-     * library's input handler adds a new async_read, additional bytes will be
-     * read, otherwise the input operation will end.
-     *
-     * When this function returns one of the following conditions is true:
-     * - There is no outstanding read operation
-     * - There are no more bytes available in the input stream
-     *
-     * You can use tellg() on the input stream to determine if all of the input
-     * bytes were read or not.
-     *
-     * If there is no pending read operation when the input method is called, it
-     * will return immediately and tellg() will not have changed.
-     */
-    friend std::istream & operator>> (std::istream & in, type & t) {
-        // this serializes calls to external read.
-        scoped_lock_type lock(t.m_read_mutex);
-
-        t.read(in);
-
-        return in;
-    }
-
-    /// Manual input supply (read some)
-    /**
-     * Copies bytes from buf into WebSocket++'s input buffers. Bytes will be
-     * copied from the supplied buffer to fulfill any pending library reads. It
-     * will return the number of bytes successfully processed. If there are no
-     * pending reads read_some will return immediately. Not all of the bytes may
-     * be able to be read in one call.
-     *
-     * @since 0.3.0-alpha4
-     *
-     * @param buf Char buffer to read into the websocket
-     * @param len Length of buf
-     * @return The number of characters from buf actually read.
-     */
-    size_t read_some(char const * buf, size_t len) {
-        // this serializes calls to external read.
-        scoped_lock_type lock(m_read_mutex);
-
-        return this->read_some_impl(buf,len);
-    }
-
-    /// Manual input supply (read all)
-    /**
-     * Similar to read_some, but continues to read until all bytes in the
-     * supplied buffer have been read or the connection runs out of read
-     * requests.
-     *
-     * This method still may not read all of the bytes in the input buffer. if
-     * it doesn't it indicates that the connection was most likely closed or
-     * is in an error state where it is no longer accepting new input.
-     *
-     * @since 0.3.0
-     *
-     * @param buf Char buffer to read into the websocket
-     * @param len Length of buf
-     * @return The number of characters from buf actually read.
-     */
-    size_t read_all(char const * buf, size_t len) {
-        // this serializes calls to external read.
-        scoped_lock_type lock(m_read_mutex);
-
-        size_t total_read = 0;
-        size_t temp_read = 0;
-
-        do {
-            temp_read = this->read_some_impl(buf+total_read,len-total_read);
-            total_read += temp_read;
-        } while (temp_read != 0 && total_read < len);
-
-        return total_read;
-    }
-
-    /// Manual input supply (DEPRECATED)
-    /**
-     * @deprecated DEPRECATED in favor of read_some()
-     * @see read_some()
-     */
-    size_t readsome(char const * buf, size_t len) {
-        return this->read_some(buf,len);
-    }
-
-    /// Signal EOF
-    /**
-     * Signals to the transport that data stream being read has reached EOF and
-     * that no more bytes may be read or written to/from the transport.
-     *
-     * @since 0.3.0-alpha4
-     */
-    void eof() {
-        // this serializes calls to external read.
-        scoped_lock_type lock(m_read_mutex);
-
-        if (m_reading) {
-            complete_read(make_error_code(transport::error::eof));
-        }
-    }
-
-    /// Signal transport error
-    /**
-     * Signals to the transport that a fatal data stream error has occurred and
-     * that no more bytes may be read or written to/from the transport.
-     *
-     * @since 0.3.0-alpha4
-     */
-    void fatal_error() {
-        // this serializes calls to external read.
-        scoped_lock_type lock(m_read_mutex);
-
-        if (m_reading) {
-            complete_read(make_error_code(transport::error::pass_through));
-        }
-    }
-
-    /// Set whether or not this connection is secure
-    /**
-     * The iostream transport does not provide any security features. As such
-     * it defaults to returning false when `is_secure` is called. However, the
-     * iostream transport may be used to wrap an external socket API that may
-     * provide secure transport. This method allows that external API to flag
-     * whether or not this connection is secure so that users of the WebSocket++
-     * API will get more accurate information.
-     *
-     * @since 0.3.0-alpha4
-     *
-     * @param value Whether or not this connection is secure.
-     */
-    void set_secure(bool value) {
-        m_is_secure = value;
-    }
-
-    /// Tests whether or not the underlying transport is secure
-    /**
-     * iostream transport will return false always because it has no information
-     * about the ultimate remote endpoint. This may or may not be accurate
-     * depending on the real source of bytes being input. The `set_secure`
-     * method may be used to flag connections that are secured by an external
-     * API
-     *
-     * @return Whether or not the underlying transport is secure
-     */
-    bool is_secure() const {
-        return m_is_secure;
-    }
-
-    /// Set human readable remote endpoint address
-    /**
-     * Sets the remote endpoint address returned by `get_remote_endpoint`. This
-     * value should be a human readable string that describes the remote
-     * endpoint. Typically an IP address or hostname, perhaps with a port. But
-     * may be something else depending on the nature of the underlying
-     * transport.
-     *
-     * If none is set the default is "iostream transport".
-     *
-     * @since 0.3.0-alpha4
-     *
-     * @param value The remote endpoint address to set.
-     */
-    void set_remote_endpoint(std::string value) {
-        m_remote_endpoint = value;
-    }
-
-    /// Get human readable remote endpoint address
-    /**
-     * The iostream transport has no information about the ultimate remote
-     * endpoint. It will return the string "iostream transport". The
-     * `set_remote_endpoint` method may be used by external network code to set
-     * a more accurate value.
-     *
-     * This value is used in access and error logs and is available to the end
-     * application for including in user facing interfaces and messages.
-     *
-     * @return A string identifying the address of the remote endpoint
-     */
-    std::string get_remote_endpoint() const {
-        return m_remote_endpoint;
-    }
-
-    /// Get the connection handle
-    /**
-     * @return The handle for this connection.
-     */
-    connection_hdl get_handle() const {
-        return m_connection_hdl;
-    }
-
-    /// Call back a function after a period of time.
-    /**
-     * Timers are not implemented in this transport. The timer pointer will
-     * always be empty. The handler will never be called.
-     *
-     * @param duration Length of time to wait in milliseconds
-     * @param callback The function to call back when the timer has expired
-     * @return A handle that can be used to cancel the timer if it is no longer
-     * needed.
-     */
-    timer_ptr set_timer(long, timer_handler) {
-        return timer_ptr();
-    }
-
-    /// Sets the write handler
-    /**
-     * The write handler is called when the iostream transport receives data
-     * that needs to be written to the appropriate output location. This handler
-     * can be used in place of registering an ostream for output.
-     *
-     * The signature of the handler is
-     * `lib::error_code (connection_hdl, char const *, size_t)` The
-     * code returned will be reported and logged by the core library.
-     *
-     * See also, set_vector_write_handler, for an optional write handler that
-     * allows more efficient handling of multiple writes at once.
-     *
-     * @see set_vector_write_handler
-     *
-     * @since 0.5.0
-     *
-     * @param h The handler to call when data is to be written.
-     */
-    void set_write_handler(write_handler h) {
-        m_write_handler = h;
-    }
-
-    /// Sets the vectored write handler
-    /**
-     * The vectored write handler is called when the iostream transport receives
-     * multiple chunks of data that need to be written to the appropriate output
-     * location. This handler can be used in conjunction with the write_handler
-     * in place of registering an ostream for output.
-     *
-     * The sequence of buffers represents bytes that should be written
-     * consecutively and it is suggested to group the buffers into as few next
-     * layer packets as possible. Vector write is used to allow implementations
-     * that support it to coalesce writes into a single TCP packet or TLS
-     * segment for improved efficiency.
-     *
-     * This is an optional handler. If it is not defined then multiple calls
-     * will be made to the standard write handler.
-     *
-     * The signature of the handler is
-     * `lib::error_code (connection_hdl, std::vector<websocketpp::transport::buffer>
-     * const & bufs)`. The code returned will be reported and logged by the core
-     * library. The `websocketpp::transport::buffer` type is a struct with two
-     * data members. buf (char const *) and len (size_t).
-     *
-     * @since 0.6.0
-     *
-     * @param h The handler to call when vectored data is to be written.
-     */
-    void set_vector_write_handler(vector_write_handler h) {
-        m_vector_write_handler = h;
-    }
-
-    /// Sets the shutdown handler
-    /**
-     * The shutdown handler is called when the iostream transport receives a
-     * notification from the core library that it is finished with all read and
-     * write operations and that the underlying transport can be cleaned up.
-     *
-     * If you are using iostream transport with another socket library, this is
-     * a good time to close/shutdown the socket for this connection.
-     *
-     * The signature of the handler is `lib::error_code (connection_hdl)`. The
-     * code returned will be reported and logged by the core library.
-     *
-     * @since 0.5.0
-     *
-     * @param h The handler to call on connection shutdown.
-     */
-    void set_shutdown_handler(shutdown_handler h) {
-        m_shutdown_handler = h;
-    }
-protected:
-    /// Initialize the connection transport
-    /**
-     * Initialize the connection's transport component.
-     *
-     * @param handler The `init_handler` to call when initialization is done
-     */
-    void init(init_handler handler) {
-        m_alog->write(log::alevel::devel,"iostream connection init");
-        handler(lib::error_code());
-    }
-
-    /// Initiate an async_read for at least num_bytes bytes into buf
-    /**
-     * Initiates an async_read request for at least num_bytes bytes. The input
-     * will be read into buf. A maximum of len bytes will be input. When the
-     * operation is complete, handler will be called with the status and number
-     * of bytes read.
-     *
-     * This method may or may not call handler from within the initial call. The
-     * application should be prepared to accept either.
-     *
-     * The application should never call this method a second time before it has
-     * been called back for the first read. If this is done, the second read
-     * will be called back immediately with a double_read error.
-     *
-     * If num_bytes or len are zero handler will be called back immediately
-     * indicating success.
-     *
-     * @param num_bytes Don't call handler until at least this many bytes have
-     * been read.
-     * @param buf The buffer to read bytes into
-     * @param len The size of buf. At maximum, this many bytes will be read.
-     * @param handler The callback to invoke when the operation is complete or
-     * ends in an error
-     */
-    void async_read_at_least(size_t num_bytes, char *buf, size_t len,
-        read_handler handler)
-    {
-        std::stringstream s;
-        s << "iostream_con async_read_at_least: " << num_bytes;
-        m_alog->write(log::alevel::devel,s.str());
-
-        if (num_bytes > len) {
-            handler(make_error_code(error::invalid_num_bytes),size_t(0));
-            return;
-        }
-
-        if (m_reading == true) {
-            handler(make_error_code(error::double_read),size_t(0));
-            return;
-        }
-
-        if (num_bytes == 0 || len == 0) {
-            handler(lib::error_code(),size_t(0));
-            return;
-        }
-
-        m_buf = buf;
-        m_len = len;
-        m_bytes_needed = num_bytes;
-        m_read_handler = handler;
-        m_cursor = 0;
-        m_reading = true;
-    }
-
-    /// Asyncronous Transport Write
-    /**
-     * Write len bytes in buf to the output method. Call handler to report
-     * success or failure. handler may or may not be called during async_write,
-     * but it must be safe for this to happen.
-     *
-     * Will return 0 on success. Other possible errors (not exhaustive)
-     * output_stream_required: No output stream was registered to write to
-     * bad_stream: a ostream pass through error
-     *
-     * This method will attempt to write to the registered ostream first. If an
-     * ostream is not registered it will use the write handler. If neither are
-     * registered then an error is passed up to the connection.
-     *
-     * @param buf buffer to read bytes from
-     * @param len number of bytes to write
-     * @param handler Callback to invoke with operation status.
-     */
-    void async_write(char const * buf, size_t len, transport::write_handler
-        handler)
-    {
-        m_alog->write(log::alevel::devel,"iostream_con async_write");
-        // TODO: lock transport state?
-
-        lib::error_code ec;
-
-        if (m_output_stream) {
-            m_output_stream->write(buf,len);
-
-            if (m_output_stream->bad()) {
-                ec = make_error_code(error::bad_stream);
-            }
-        } else if (m_write_handler) {
-            ec = m_write_handler(m_connection_hdl, buf, len);
-        } else {
-            ec = make_error_code(error::output_stream_required);
-        }
-
-        handler(ec);
-    }
-
-    /// Asyncronous Transport Write (scatter-gather)
-    /**
-     * Write a sequence of buffers to the output method. Call handler to report
-     * success or failure. handler may or may not be called during async_write,
-     * but it must be safe for this to happen.
-     *
-     * Will return 0 on success. Other possible errors (not exhaustive)
-     * output_stream_required: No output stream was registered to write to
-     * bad_stream: a ostream pass through error
-     *
-     * This method will attempt to write to the registered ostream first. If an
-     * ostream is not registered it will use the write handler. If neither are
-     * registered then an error is passed up to the connection.
-     *
-     * @param bufs vector of buffers to write
-     * @param handler Callback to invoke with operation status.
-     */
-    void async_write(std::vector<buffer> const & bufs, transport::write_handler
-        handler)
-    {
-        m_alog->write(log::alevel::devel,"iostream_con async_write buffer list");
-        // TODO: lock transport state?
-
-        lib::error_code ec;
-
-        if (m_output_stream) {
-            std::vector<buffer>::const_iterator it;
-            for (it = bufs.begin(); it != bufs.end(); it++) {
-                m_output_stream->write((*it).buf,(*it).len);
-
-                if (m_output_stream->bad()) {
-                    ec = make_error_code(error::bad_stream);
-                    break;
-                }
-            }
-        } else if (m_vector_write_handler) {
-            ec = m_vector_write_handler(m_connection_hdl, bufs);
-        } else if (m_write_handler) {
-            std::vector<buffer>::const_iterator it;
-            for (it = bufs.begin(); it != bufs.end(); it++) {
-                ec = m_write_handler(m_connection_hdl, (*it).buf, (*it).len);
-                if (ec) {break;}
-            }
-
-        } else {
-            ec = make_error_code(error::output_stream_required);
-        }
-
-        handler(ec);
-    }
-
-    /// Set Connection Handle
-    /**
-     * @param hdl The new handle
-     */
-    void set_handle(connection_hdl hdl) {
-        m_connection_hdl = hdl;
-    }
-
-    /// Call given handler back within the transport's event system (if present)
-    /**
-     * Invoke a callback within the transport's event system if it has one. If
-     * it doesn't, the handler will be invoked immediately before this function
-     * returns.
-     *
-     * @param handler The callback to invoke
-     *
-     * @return Whether or not the transport was able to register the handler for
-     * callback.
-     */
-    lib::error_code dispatch(dispatch_handler handler) {
-        handler();
-        return lib::error_code();
-    }
-
-    /// Perform cleanup on socket shutdown_handler
-    /**
-     * If a shutdown handler is set, call it and pass through its return error
-     * code. Otherwise assume there is nothing to do and pass through a success
-     * code.
-     *
-     * @param handler The `shutdown_handler` to call back when complete
-     */
-    void async_shutdown(transport::shutdown_handler handler) {
-        lib::error_code ec;
-
-        if (m_shutdown_handler) {
-            ec = m_shutdown_handler(m_connection_hdl);
-        }
-
-        handler(ec);
-    }
-private:
-    void read(std::istream &in) {
-        m_alog->write(log::alevel::devel,"iostream_con read");
-
-        while (in.good()) {
-            if (!m_reading) {
-                m_elog->write(log::elevel::devel,"write while not reading");
-                break;
-            }
-
-            in.read(m_buf+m_cursor,static_cast<std::streamsize>(m_len-m_cursor));
-
-            if (in.gcount() == 0) {
-                m_elog->write(log::elevel::devel,"read zero bytes");
-                break;
-            }
-
-            m_cursor += static_cast<size_t>(in.gcount());
-
-            // TODO: error handling
-            if (in.bad()) {
-                m_reading = false;
-                complete_read(make_error_code(error::bad_stream));
-            }
-
-            if (m_cursor >= m_bytes_needed) {
-                m_reading = false;
-                complete_read(lib::error_code());
-            }
-        }
-    }
-
-    size_t read_some_impl(char const * buf, size_t len) {
-        m_alog->write(log::alevel::devel,"iostream_con read_some");
-
-        if (!m_reading) {
-            m_elog->write(log::elevel::devel,"write while not reading");
-            return 0;
-        }
-
-        size_t bytes_to_copy = (std::min)(len,m_len-m_cursor);
-
-        std::copy(buf,buf+bytes_to_copy,m_buf+m_cursor);
-
-        m_cursor += bytes_to_copy;
-
-        if (m_cursor >= m_bytes_needed) {
-            complete_read(lib::error_code());
-        }
-
-        return bytes_to_copy;
-    }
-
-    /// Signal that a requested read is complete
-    /**
-     * Sets the reading flag to false and returns the handler that should be
-     * called back with the result of the read. The cursor position that is sent
-     * is whatever the value of m_cursor is.
-     *
-     * It MUST NOT be called when m_reading is false.
-     * it MUST be called while holding the read lock
-     *
-     * It is important to use this method rather than directly setting/calling
-     * m_read_handler back because this function makes sure to delete the
-     * locally stored handler which contains shared pointers that will otherwise
-     * cause circular reference based memory leaks.
-     *
-     * @param ec The error code to forward to the read handler
-     */
-    void complete_read(lib::error_code const & ec) {
-        m_reading = false;
-
-        read_handler handler = m_read_handler;
-        m_read_handler = read_handler();
-
-        handler(ec,m_cursor);
-    }
-
-    // Read space (Protected by m_read_mutex)
-    char *          m_buf;
-    size_t          m_len;
-    size_t          m_bytes_needed;
-    read_handler    m_read_handler;
-    size_t          m_cursor;
-
-    // transport resources
-    std::ostream *  m_output_stream;
-    connection_hdl  m_connection_hdl;
-    write_handler   m_write_handler;
-    vector_write_handler m_vector_write_handler;
-    shutdown_handler    m_shutdown_handler;
-
-    bool            m_reading;
-    bool const      m_is_server;
-    bool            m_is_secure;
-    lib::shared_ptr<alog_type>     m_alog;
-    lib::shared_ptr<elog_type>     m_elog;
-    std::string     m_remote_endpoint;
-
-    // This lock ensures that only one thread can edit read data for this
-    // connection. This is a very coarse lock that is basically locked all the
-    // time. The nature of the connection is such that it cannot be
-    // parallelized, the locking is here to prevent intra-connection concurrency
-    // in order to allow inter-connection concurrency.
-    mutex_type      m_read_mutex;
-};
-
-
-} // namespace iostream
-} // namespace transport
-} // namespace websocketpp
-
-#endif // WEBSOCKETPP_TRANSPORT_IOSTREAM_CON_HPP