pango 2.2.0-x86-mingw32 → 2.2.1-x86-mingw32

data/vendor/local/include/unicode/uspoof.h

@@ -0,0 +1,1064 @@
+/*
+***************************************************************************
+* Copyright (C) 2008-2014, International Business Machines Corporation
+* and others. All Rights Reserved.
+***************************************************************************
+*   file name:  uspoof.h
+*   encoding:   US-ASCII
+*   tab size:   8 (not used)
+*   indentation:4
+*
+*   created on: 2008Feb13
+*   created by: Andy Heninger
+*
+*   Unicode Spoof Detection
+*/
+
+#ifndef USPOOF_H
+#define USPOOF_H
+
+#include "unicode/utypes.h"
+#include "unicode/uset.h"
+#include "unicode/parseerr.h"
+#include "unicode/localpointer.h"
+
+#if !UCONFIG_NO_NORMALIZATION
+
+
+#if U_SHOW_CPLUSPLUS_API
+#include "unicode/unistr.h"
+#include "unicode/uniset.h"
+#endif
+
+
+/**
+ * \file
+ * \brief Unicode Security and Spoofing Detection, C API.
+ *
+ * These functions are intended to check strings, typically
+ * identifiers of some type, such as URLs, for the presence of
+ * characters that are likely to be visually confusing - 
+ * for cases where the displayed form of an identifier may
+ * not be what it appears to be.
+ *
+ * Unicode Technical Report #36, http://unicode.org/reports/tr36, and
+ * Unicode Technical Standard #39, http://unicode.org/reports/tr39
+ * "Unicode security considerations", give more background on 
+ * security an spoofing issues with Unicode identifiers.
+ * The tests and checks provided by this module implement the recommendations
+ * from those Unicode documents.
+ *
+ * The tests available on identifiers fall into two general categories:
+ *   -#  Single identifier tests.  Check whether an identifier is
+ *       potentially confusable with any other string, or is suspicious
+ *       for other reasons.
+ *   -#  Two identifier tests.  Check whether two specific identifiers are confusable.
+ *       This does not consider whether either of strings is potentially
+ *       confusable with any string other than the exact one specified.
+ *
+ * The steps to perform confusability testing are
+ *   -#  Open a USpoofChecker.
+ *   -#  Configure the USPoofChecker for the desired set of tests.  The tests that will
+ *       be performed are specified by a set of USpoofChecks flags.
+ *   -#  Perform the checks using the pre-configured USpoofChecker.  The results indicate
+ *       which (if any) of the selected tests have identified possible problems with the identifier.
+ *       Results are reported as a set of USpoofChecks flags;  this mirrors the form in which
+ *       the set of tests to perform was originally specified to the USpoofChecker.
+ *
+ * A USpoofChecker may be used repeatedly to perform checks on any number of identifiers.
+ *
+ * Thread Safety: The test functions for checking a single identifier, or for testing 
+ * whether two identifiers are possible confusable, are thread safe.  
+ * They may called concurrently, from multiple threads, using the same USpoofChecker instance.
+ *
+ * More generally, the standard ICU thread safety rules apply:  functions that take a
+ * const USpoofChecker parameter are thread safe.  Those that take a non-const 
+ * USpoofChecier are not thread safe.
+ *
+ *
+ * Descriptions of the available checks.
+ *
+ * When testing whether pairs of identifiers are confusable, with the uspoof_areConfusable()
+ * family of functions, the relevant tests are
+ *
+ *   -# USPOOF_SINGLE_SCRIPT_CONFUSABLE:  All of the characters from the two identifiers are
+ *      from a single script, and the two identifiers are visually confusable.
+ *   -# USPOOF_MIXED_SCRIPT_CONFUSABLE:  At least one of the identifiers contains characters
+ *      from more than one script, and the two identifiers are visually confusable.
+ *   -# USPOOF_WHOLE_SCRIPT_CONFUSABLE: Each of the two identifiers is of a single script, but
+ *      the two identifiers are from different scripts, and they are visually confusable.
+ *
+ * The safest approach is to enable all three of these checks as a group.
+ *
+ * USPOOF_ANY_CASE is a modifier for the above tests.  If the identifiers being checked can
+ * be of mixed case and are used in a case-sensitive manner, this option should be specified.
+ *
+ * If the identifiers being checked are used in a case-insensitive manner, and if they are
+ * displayed to users in lower-case form only, the USPOOF_ANY_CASE option should not be
+ * specified.  Confusabality issues involving upper case letters will not be reported.
+ *
+ * When performing tests on a single identifier, with the uspoof_check() family of functions,
+ * the relevant tests are:
+ *
+ *    -# USPOOF_MIXED_SCRIPT_CONFUSABLE: the identifier contains characters from multiple
+ *       scripts, and there exists an identifier of a single script that is visually confusable.
+ *    -# USPOOF_WHOLE_SCRIPT_CONFUSABLE: the identifier consists of characters from a single
+ *       script, and there exists a visually confusable identifier.
+ *       The visually confusable identifier also consists of characters from a single script.
+ *       but not the same script as the identifier being checked.
+ *    -# USPOOF_ANY_CASE: modifies the mixed script and whole script confusables tests.  If
+ *       specified, the checks will consider confusable characters of any case.  If this flag is not
+ *       set, the test is performed assuming case folded identifiers.
+ *    -# USPOOF_SINGLE_SCRIPT: check that the identifier contains only characters from a
+ *       single script.  (Characters from the 'common' and 'inherited' scripts are ignored.)
+ *       This is not a test for confusable identifiers
+ *    -# USPOOF_INVISIBLE: check an identifier for the presence of invisible characters,
+ *       such as zero-width spaces, or character sequences that are
+ *       likely not to display, such as multiple occurrences of the same
+ *       non-spacing mark.  This check does not test the input string as a whole
+ *       for conformance to any particular syntax for identifiers.
+ *    -# USPOOF_CHAR_LIMIT: check that an identifier contains only characters from a specified set
+ *       of acceptable characters.  See uspoof_setAllowedChars() and
+ *       uspoof_setAllowedLocales().
+ *
+ *  Note on Scripts:
+ *     Characters from the Unicode Scripts "Common" and "Inherited" are ignored when considering
+ *     the script of an identifier. Common characters include digits and symbols that
+ *     are normally used with text from more than one script.
+ *
+ *  Identifier Skeletons:  A skeleton is a transformation of an identifier, such that
+ *  all identifiers that are confusable with each other have the same skeleton.
+ *  Using skeletons, it is possible to build a dictionary data structure for
+ *  a set of identifiers, and then quickly test whether a new identifier is
+ *  confusable with an identifier already in the set.  The uspoof_getSkeleton()
+ *  family of functions will produce the skeleton from an identifier.
+ *
+ *  Note that skeletons are not guaranteed to be stable between versions 
+ *  of Unicode or ICU, so an applications should not rely on creating a permanent,
+ *  or difficult to update, database of skeletons.  Instabilities result from
+ *  identifying new pairs or sequences of characters that are visually
+ *  confusable, and thus must be mapped to the same skeleton character(s).
+ *
+ */
+
+struct USpoofChecker;
+typedef struct USpoofChecker USpoofChecker; /**< typedef for C of USpoofChecker */
+
+/**
+ * Enum for the kinds of checks that USpoofChecker can perform.
+ * These enum values are used both to select the set of checks that
+ * will be performed, and to report results from the check function.
+ *
+ * @stable ICU 4.2
+ */
+typedef enum USpoofChecks {
+    /**   Single script confusable test.
+      *   When testing whether two identifiers are confusable, report that they are if
+      *   both are from the same script and they are visually confusable.
+      *   Note: this test is not applicable to a check of a single identifier.
+      */
+    USPOOF_SINGLE_SCRIPT_CONFUSABLE =   1,
+
+    /** Mixed script confusable test.
+     *  When checking a single identifier, report a problem if
+     *    the identifier contains multiple scripts, and
+     *    is confusable with some other identifier in a single script
+     *  When testing whether two identifiers are confusable, report that they are if
+     *    the two IDs are visually confusable, 
+     *    and at least one contains characters from more than one script.
+     */
+    USPOOF_MIXED_SCRIPT_CONFUSABLE  =   2,
+
+    /** Whole script confusable test.
+     *  When checking a single identifier, report a problem if
+     *    The identifier is of a single script, and
+     *    there exists a confusable identifier in another script.
+     *  When testing whether two identifiers are confusable, report that they are if
+     *    each is of a single script, 
+     *    the scripts of the two identifiers are different, and
+     *    the identifiers are visually confusable.
+     */
+    USPOOF_WHOLE_SCRIPT_CONFUSABLE  =   4,
+    
+    /** Any Case Modifier for confusable identifier tests.
+        If specified, consider all characters, of any case, when looking for confusables.
+        If USPOOF_ANY_CASE is not specified, identifiers being checked are assumed to have been
+        case folded.  Upper case confusable characters will not be checked.
+        Selects between Lower Case Confusable and
+        Any Case Confusable.   */
+    USPOOF_ANY_CASE                 =   8,
+
+    /**
+      * Check that an identifier is no looser than the specified RestrictionLevel.
+      * The default if uspoof_setRestrctionLevel() is not called is HIGHLY_RESTRICTIVE.
+      *
+      * If USPOOF_AUX_INFO is enabled the actual restriction level of the
+      * identifier being tested will also be returned by uspoof_check().
+      *
+      * @see URestrictionLevel
+      * @see uspoof_setRestrictionLevel
+      * @see USPOOF_AUX_INFO
+      *
+      * @stable ICU 51
+      */
+    USPOOF_RESTRICTION_LEVEL        = 16,
+
+#ifndef U_HIDE_DEPRECATED_API 
+    /** Check that an identifier contains only characters from a
+      * single script (plus chars from the common and inherited scripts.)
+      * Applies to checks of a single identifier check only.
+      * @deprecated ICU 51  Use RESTRICTION_LEVEL instead.
+      */
+    USPOOF_SINGLE_SCRIPT            =  USPOOF_RESTRICTION_LEVEL,
+#endif  /* U_HIDE_DEPRECATED_API */
+   
+    /** Check an identifier for the presence of invisible characters,
+      * such as zero-width spaces, or character sequences that are
+      * likely not to display, such as multiple occurrences of the same
+      * non-spacing mark.  This check does not test the input string as a whole
+      * for conformance to any particular syntax for identifiers.
+      */
+    USPOOF_INVISIBLE                =  32,
+
+    /** Check that an identifier contains only characters from a specified set
+      * of acceptable characters.  See uspoof_setAllowedChars() and
+      * uspoof_setAllowedLocales().
+      */
+    USPOOF_CHAR_LIMIT               =  64,
+
+   /**
+     * Check that an identifier does not include decimal digits from
+     * more than one numbering system.
+     * 
+     * @stable ICU 51
+     */
+    USPOOF_MIXED_NUMBERS            = 128,
+
+   /**
+     * Enable all spoof checks.
+     * 
+     * @stable ICU 4.6
+     */
+    USPOOF_ALL_CHECKS               = 0xFFFF,
+
+    /**
+      * Enable the return of auxillary (non-error) information in the
+      * upper bits of the check results value. 
+      *
+      * If this "check" is not enabled, the results of uspoof_check() will be zero when an
+      * identifier passes all of the enabled checks.
+      *
+      * If this "check" is enabled, (uspoof_check() & USPOOF_ALL_CHECKS) will be zero
+      * when an identifier passes all checks.
+      *
+      * @stable ICU 51
+      */
+    USPOOF_AUX_INFO                  = 0x40000000
+
+    } USpoofChecks;
+    
+    
+    /**
+     * Constants from UAX #39 for use in setRestrictionLevel(), and
+     * for returned identifier restriction levels in check results.
+     * @stable ICU 51
+     */
+    typedef enum URestrictionLevel {
+        /**
+         * Only ASCII characters: U+0000..U+007F
+         * 
+         * @stable ICU 51
+         */
+        USPOOF_ASCII = 0x10000000,
+#ifndef U_HIDE_DRAFT_API
+        /**
+          * All characters in each identifier must be from a single script.
+          *
+          * @draft ICU 53
+          */
+        USPOOF_SINGLE_SCRIPT_RESTRICTIVE = 0x20000000,
+#endif /* U_HIDE_DRAFT_API */
+        /**
+         * All characters in each identifier must be from a single script, or from the combinations: Latin + Han +
+         * Hiragana + Katakana; Latin + Han + Bopomofo; or Latin + Han + Hangul. Note that this level will satisfy the
+         * vast majority of Latin-script users; also that TR36 has ASCII instead of Latin.
+         * 
+         * @stable ICU 51
+         */
+        USPOOF_HIGHLY_RESTRICTIVE = 0x30000000,
+        /**
+         * Allow Latin with other scripts except Cyrillic, Greek, Cherokee Otherwise, the same as Highly Restrictive
+         * 
+         * @stable ICU 51
+         */
+        USPOOF_MODERATELY_RESTRICTIVE = 0x40000000,
+        /**
+         * Allow arbitrary mixtures of scripts. Otherwise, the same as Moderately Restrictive.
+         * 
+         * @stable ICU 51
+         */
+        USPOOF_MINIMALLY_RESTRICTIVE = 0x50000000,
+        /**
+         * Any valid identifiers, including characters outside of the Identifier Profile.
+         * 
+         * @stable ICU 51
+         */
+        USPOOF_UNRESTRICTIVE = 0x60000000,
+#ifndef U_HIDE_DRAFT_API
+        /**
+          * Mask for selecting the Restriction Level bits from the return value of uspoof_check().
+          * 
+          * @draft ICU 53
+          */
+         USPOOF_RESTRICTION_LEVEL_MASK = 0x7F000000 
+#endif /* U_HIDE_DRAFT_API */
+    } URestrictionLevel;
+
+/**
+ *  Create a Unicode Spoof Checker, configured to perform all 
+ *  checks except for USPOOF_LOCALE_LIMIT and USPOOF_CHAR_LIMIT.
+ *  Note that additional checks may be added in the future,
+ *  resulting in the changes to the default checking behavior.
+ *
+ *  @param status  The error code, set if this function encounters a problem.
+ *  @return        the newly created Spoof Checker
+ *  @stable ICU 4.2
+ */
+U_STABLE USpoofChecker * U_EXPORT2
+uspoof_open(UErrorCode *status);
+
+
+/**
+ * Open a Spoof checker from its serialized form, stored in 32-bit-aligned memory.
+ * Inverse of uspoof_serialize().
+ * The memory containing the serialized data must remain valid and unchanged
+ * as long as the spoof checker, or any cloned copies of the spoof checker,
+ * are in use.  Ownership of the memory remains with the caller.
+ * The spoof checker (and any clones) must be closed prior to deleting the
+ * serialized data.
+ *
+ * @param data a pointer to 32-bit-aligned memory containing the serialized form of spoof data
+ * @param length the number of bytes available at data;
+ *               can be more than necessary
+ * @param pActualLength receives the actual number of bytes at data taken up by the data;
+ *                      can be NULL
+ * @param pErrorCode ICU error code
+ * @return the spoof checker.
+ *
+ * @see uspoof_open
+ * @see uspoof_serialize
+ * @stable ICU 4.2
+ */
+U_STABLE USpoofChecker * U_EXPORT2
+uspoof_openFromSerialized(const void *data, int32_t length, int32_t *pActualLength,
+                          UErrorCode *pErrorCode);
+
+/**
+  * Open a Spoof Checker from the source form of the spoof data.
+  * The two inputs correspond to the Unicode data files confusables.txt
+  * and confusablesWholeScript.txt as described in Unicode UAX #39.
+  * The syntax of the source data is as described in UAX #39 for
+  * these files, and the content of these files is acceptable input.
+  *
+  * The character encoding of the (char *) input text is UTF-8.
+  *
+  * @param confusables a pointer to the confusable characters definitions,
+  *                    as found in file confusables.txt from unicode.org.
+  * @param confusablesLen The length of the confusables text, or -1 if the
+  *                    input string is zero terminated.
+  * @param confusablesWholeScript
+  *                    a pointer to the whole script confusables definitions,
+  *                    as found in the file confusablesWholeScript.txt from unicode.org.
+  * @param confusablesWholeScriptLen The length of the whole script confusables text, or
+  *                    -1 if the input string is zero terminated.
+  * @param errType     In the event of an error in the input, indicates
+  *                    which of the input files contains the error.
+  *                    The value is one of USPOOF_SINGLE_SCRIPT_CONFUSABLE or
+  *                    USPOOF_WHOLE_SCRIPT_CONFUSABLE, or
+  *                    zero if no errors are found.
+  * @param pe          In the event of an error in the input, receives the position
+  *                    in the input text (line, offset) of the error.
+  * @param status      an in/out ICU UErrorCode.  Among the possible errors is
+  *                    U_PARSE_ERROR, which is used to report syntax errors
+  *                    in the input.
+  * @return            A spoof checker that uses the rules from the input files.
+  * @stable ICU 4.2
+  */
+U_STABLE USpoofChecker * U_EXPORT2
+uspoof_openFromSource(const char *confusables,  int32_t confusablesLen,
+                      const char *confusablesWholeScript, int32_t confusablesWholeScriptLen,
+                      int32_t *errType, UParseError *pe, UErrorCode *status);
+
+
+/**
+  * Close a Spoof Checker, freeing any memory that was being held by
+  *   its implementation.
+  * @stable ICU 4.2
+  */
+U_STABLE void U_EXPORT2
+uspoof_close(USpoofChecker *sc);
+
+#if U_SHOW_CPLUSPLUS_API
+
+U_NAMESPACE_BEGIN
+
+/**
+ * \class LocalUSpoofCheckerPointer
+ * "Smart pointer" class, closes a USpoofChecker via uspoof_close().
+ * For most methods see the LocalPointerBase base class.
+ *
+ * @see LocalPointerBase
+ * @see LocalPointer
+ * @stable ICU 4.4
+ */
+U_DEFINE_LOCAL_OPEN_POINTER(LocalUSpoofCheckerPointer, USpoofChecker, uspoof_close);
+
+U_NAMESPACE_END
+
+#endif
+
+/**
+ * Clone a Spoof Checker.  The clone will be set to perform the same checks
+ *   as the original source.
+ *
+ * @param sc       The source USpoofChecker
+ * @param status   The error code, set if this function encounters a problem.
+ * @return
+ * @stable ICU 4.2
+ */
+U_STABLE USpoofChecker * U_EXPORT2
+uspoof_clone(const USpoofChecker *sc, UErrorCode *status);
+
+
+/**
+ * Specify the set of checks that will be performed by the check
+ * functions of this Spoof Checker.
+ *
+ * @param sc       The USpoofChecker
+ * @param checks         The set of checks that this spoof checker will perform.
+ *                 The value is a bit set, obtained by OR-ing together
+ *                 values from enum USpoofChecks.
+ * @param status   The error code, set if this function encounters a problem.
+ * @stable ICU 4.2
+ *
+ */
+U_STABLE void U_EXPORT2
+uspoof_setChecks(USpoofChecker *sc, int32_t checks, UErrorCode *status);
+
+/**
+ * Get the set of checks that this Spoof Checker has been configured to perform.
+ * 
+ * @param sc       The USpoofChecker
+ * @param status   The error code, set if this function encounters a problem.
+ * @return         The set of checks that this spoof checker will perform.
+ *                 The value is a bit set, obtained by OR-ing together
+ *                 values from enum USpoofChecks.
+ * @stable ICU 4.2
+ *
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_getChecks(const USpoofChecker *sc, UErrorCode *status);
+
+/**
+  * Set the loosest restriction level allowed. The default if this function 
+  * is not called is HIGHLY_RESTRICTIVE.
+  * Calling this function also enables the RESTRICTION_LEVEL check.
+  * @param restrictionLevel The loosest restriction level allowed.
+  * @see URestrictionLevel
+  * @stable ICU 51
+  */
+U_STABLE void U_EXPORT2
+uspoof_setRestrictionLevel(USpoofChecker *sc, URestrictionLevel restrictionLevel);
+
+
+/**
+  * Get the Restriction Level that will be tested if the checks include RESTRICTION_LEVEL.
+  *
+  * @return The restriction level
+  * @see URestrictionLevel
+  * @stable ICU 51
+  */
+U_STABLE URestrictionLevel U_EXPORT2
+uspoof_getRestrictionLevel(const USpoofChecker *sc);
+
+/**
+ * Limit characters that are acceptable in identifiers being checked to those 
+ * normally used with the languages associated with the specified locales.
+ * Any previously specified list of locales is replaced by the new settings.
+ *
+ * A set of languages is determined from the locale(s), and
+ * from those a set of acceptable Unicode scripts is determined.
+ * Characters from this set of scripts, along with characters from
+ * the "common" and "inherited" Unicode Script categories
+ * will be permitted.
+ *
+ * Supplying an empty string removes all restrictions;
+ * characters from any script will be allowed.
+ *
+ * The USPOOF_CHAR_LIMIT test is automatically enabled for this
+ * USpoofChecker when calling this function with a non-empty list
+ * of locales.
+ *
+ * The Unicode Set of characters that will be allowed is accessible
+ * via the uspoof_getAllowedChars() function.  uspoof_setAllowedLocales()
+ * will <i>replace</i> any previously applied set of allowed characters.
+ *
+ * Adjustments, such as additions or deletions of certain classes of characters,
+ * can be made to the result of uspoof_setAllowedLocales() by
+ * fetching the resulting set with uspoof_getAllowedChars(),
+ * manipulating it with the Unicode Set API, then resetting the
+ * spoof detectors limits with uspoof_setAllowedChars()
+ *
+ * @param sc           The USpoofChecker 
+ * @param localesList  A list list of locales, from which the language
+ *                     and associated script are extracted.  The locales
+ *                     are comma-separated if there is more than one.
+ *                     White space may not appear within an individual locale,
+ *                     but is ignored otherwise.
+ *                     The locales are syntactically like those from the
+ *                     HTTP Accept-Language header.
+ *                     If the localesList is empty, no restrictions will be placed on
+ *                     the allowed characters.
+ *
+ * @param status       The error code, set if this function encounters a problem.
+ * @stable ICU 4.2
+ */
+U_STABLE void U_EXPORT2
+uspoof_setAllowedLocales(USpoofChecker *sc, const char *localesList, UErrorCode *status);
+
+/**
+ * Get a list of locales for the scripts that are acceptable in strings
+ *  to be checked.  If no limitations on scripts have been specified,
+ *  an empty string will be returned.
+ *
+ *  uspoof_setAllowedChars() will reset the list of allowed to be empty.
+ *
+ *  The format of the returned list is the same as that supplied to 
+ *  uspoof_setAllowedLocales(), but returned list may not be identical 
+ *  to the originally specified string; the string may be reformatted, 
+ *  and information other than languages from
+ *  the originally specified locales may be omitted.
+ *
+ * @param sc           The USpoofChecker 
+ * @param status       The error code, set if this function encounters a problem.
+ * @return             A string containing a list of  locales corresponding
+ *                     to the acceptable scripts, formatted like an
+ *                     HTTP Accept Language value.
+ *  
+ * @stable ICU 4.2
+ */
+U_STABLE const char * U_EXPORT2
+uspoof_getAllowedLocales(USpoofChecker *sc, UErrorCode *status);
+
+
+/**
+ * Limit the acceptable characters to those specified by a Unicode Set.
+ *   Any previously specified character limit is
+ *   is replaced by the new settings.  This includes limits on
+ *   characters that were set with the uspoof_setAllowedLocales() function.
+ *
+ * The USPOOF_CHAR_LIMIT test is automatically enabled for this
+ * USpoofChecker by this function.
+ *
+ * @param sc       The USpoofChecker 
+ * @param chars    A Unicode Set containing the list of
+ *                 characters that are permitted.  Ownership of the set
+ *                 remains with the caller.  The incoming set is cloned by
+ *                 this function, so there are no restrictions on modifying
+ *                 or deleting the USet after calling this function.
+ * @param status   The error code, set if this function encounters a problem.
+ * @stable ICU 4.2
+ */
+U_STABLE void U_EXPORT2
+uspoof_setAllowedChars(USpoofChecker *sc, const USet *chars, UErrorCode *status);
+
+
+/**
+ * Get a USet for the characters permitted in an identifier.
+ * This corresponds to the limits imposed by the Set Allowed Characters
+ * functions. Limitations imposed by other checks will not be
+ * reflected in the set returned by this function.
+ *
+ * The returned set will be frozen, meaning that it cannot be modified
+ * by the caller.
+ *
+ * Ownership of the returned set remains with the Spoof Detector.  The
+ * returned set will become invalid if the spoof detector is closed,
+ * or if a new set of allowed characters is specified.
+ *
+ *
+ * @param sc       The USpoofChecker 
+ * @param status   The error code, set if this function encounters a problem.
+ * @return         A USet containing the characters that are permitted by
+ *                 the USPOOF_CHAR_LIMIT test.
+ * @stable ICU 4.2
+ */
+U_STABLE const USet * U_EXPORT2
+uspoof_getAllowedChars(const USpoofChecker *sc, UErrorCode *status);
+
+
+#if U_SHOW_CPLUSPLUS_API
+/**
+ * Limit the acceptable characters to those specified by a Unicode Set.
+ *   Any previously specified character limit is
+ *   is replaced by the new settings.    This includes limits on
+ *   characters that were set with the uspoof_setAllowedLocales() function.
+ *
+ * The USPOOF_CHAR_LIMIT test is automatically enabled for this
+ * USoofChecker by this function.
+ *
+ * @param sc       The USpoofChecker 
+ * @param chars    A Unicode Set containing the list of
+ *                 characters that are permitted.  Ownership of the set
+ *                 remains with the caller.  The incoming set is cloned by
+ *                 this function, so there are no restrictions on modifying
+ *                 or deleting the UnicodeSet after calling this function.
+ * @param status   The error code, set if this function encounters a problem.
+ * @stable ICU 4.2
+ */
+U_STABLE void U_EXPORT2
+uspoof_setAllowedUnicodeSet(USpoofChecker *sc, const icu::UnicodeSet *chars, UErrorCode *status);
+
+
+/**
+ * Get a UnicodeSet for the characters permitted in an identifier.
+ * This corresponds to the limits imposed by the Set Allowed Characters / 
+ * UnicodeSet functions. Limitations imposed by other checks will not be
+ * reflected in the set returned by this function.
+ *
+ * The returned set will be frozen, meaning that it cannot be modified
+ * by the caller.
+ *
+ * Ownership of the returned set remains with the Spoof Detector.  The
+ * returned set will become invalid if the spoof detector is closed,
+ * or if a new set of allowed characters is specified.
+ *
+ *
+ * @param sc       The USpoofChecker 
+ * @param status   The error code, set if this function encounters a problem.
+ * @return         A UnicodeSet containing the characters that are permitted by
+ *                 the USPOOF_CHAR_LIMIT test.
+ * @stable ICU 4.2
+ */
+U_STABLE const icu::UnicodeSet * U_EXPORT2
+uspoof_getAllowedUnicodeSet(const USpoofChecker *sc, UErrorCode *status);
+#endif
+
+
+/**
+ * Check the specified string for possible security issues.
+ * The text to be checked will typically be an identifier of some sort.
+ * The set of checks to be performed is specified with uspoof_setChecks().
+ * 
+ * @param sc      The USpoofChecker 
+ * @param id      The identifier to be checked for possible security issues,
+ *                in UTF-16 format.
+ * @param length  the length of the string to be checked, expressed in
+ *                16 bit UTF-16 code units, or -1 if the string is 
+ *                zero terminated.
+ * @param position      An out parameter.
+ *                Originally, the index of the first string position that failed a check.
+ *                Now, always returns zero.
+ *                This parameter may be null.
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Spoofing or security issues detected with the input string are
+ *                not reported here, but through the function's return value.
+ * @return        An integer value with bits set for any potential security
+ *                or spoofing issues detected.  The bits are defined by
+ *                enum USpoofChecks.  (returned_value & USPOOF_ALL_CHECKS)
+ *                will be zero if the input string passes all of the
+ *                enabled checks.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_check(const USpoofChecker *sc,
+                         const UChar *id, int32_t length, 
+                         int32_t *position,
+                         UErrorCode *status);
+
+
+/**
+ * Check the specified string for possible security issues.
+ * The text to be checked will typically be an identifier of some sort.
+ * The set of checks to be performed is specified with uspoof_setChecks().
+ * 
+ * @param sc      The USpoofChecker 
+ * @param id      A identifier to be checked for possible security issues, in UTF8 format.
+ * @param length  the length of the string to be checked, or -1 if the string is 
+ *                zero terminated.
+ * @param position      An out parameter.
+ *                Originally, the index of the first string position that failed a check.
+ *                Now, always returns zero.
+ *                This parameter may be null.
+ *                @deprecated ICU 51
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Spoofing or security issues detected with the input string are
+ *                not reported here, but through the function's return value.
+ *                If the input contains invalid UTF-8 sequences,
+ *                a status of U_INVALID_CHAR_FOUND will be returned.
+ * @return        An integer value with bits set for any potential security
+ *                or spoofing issues detected.  The bits are defined by
+ *                enum USpoofChecks.  (returned_value & USPOOF_ALL_CHECKS)
+ *                will be zero if the input string passes all of the
+ *                enabled checks.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_checkUTF8(const USpoofChecker *sc,
+                 const char *id, int32_t length,
+                 int32_t *position,
+                 UErrorCode *status);
+
+
+#if U_SHOW_CPLUSPLUS_API
+/**
+ * Check the specified string for possible security issues.
+ * The text to be checked will typically be an identifier of some sort.
+ * The set of checks to be performed is specified with uspoof_setChecks().
+ * 
+ * @param sc      The USpoofChecker 
+ * @param id      A identifier to be checked for possible security issues.
+ * @param position      An out parameter.
+ *                Originally, the index of the first string position that failed a check.
+ *                Now, always returns zero.
+ *                This parameter may be null.
+ *                @deprecated ICU 51
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Spoofing or security issues detected with the input string are
+ *                not reported here, but through the function's return value.
+ * @return        An integer value with bits set for any potential security
+ *                or spoofing issues detected.  The bits are defined by
+ *                enum USpoofChecks.  (returned_value & USPOOF_ALL_CHECKS)
+ *                will be zero if the input string passes all of the
+ *                enabled checks.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_checkUnicodeString(const USpoofChecker *sc,
+                          const icu::UnicodeString &id, 
+                          int32_t *position,
+                          UErrorCode *status);
+
+#endif
+
+
+/**
+ * Check the whether two specified strings are visually confusable.
+ * The types of confusability to be tested - single script, mixed script,
+ * or whole script - are determined by the check options set for the
+ * USpoofChecker.
+ *
+ * The tests to be performed are controlled by the flags
+ *   USPOOF_SINGLE_SCRIPT_CONFUSABLE 
+ *   USPOOF_MIXED_SCRIPT_CONFUSABLE  
+ *   USPOOF_WHOLE_SCRIPT_CONFUSABLE
+ * At least one of these tests must be selected.
+ * 
+ * USPOOF_ANY_CASE is a modifier for the tests.  Select it if the identifiers
+ *   may be of mixed case.
+ * If identifiers are case folded for comparison and
+ * display to the user, do not select the USPOOF_ANY_CASE option.
+ *
+ *
+ * @param sc      The USpoofChecker
+ * @param id1     The first of the two identifiers to be compared for 
+ *                confusability.  The strings are in UTF-16 format.
+ * @param length1 the length of the first identifer, expressed in
+ *                16 bit UTF-16 code units, or -1 if the string is 
+ *                nul terminated.
+ * @param id2     The second of the two identifiers to be compared for 
+ *                confusability.  The identifiers are in UTF-16 format.
+ * @param length2 The length of the second identifiers, expressed in
+ *                16 bit UTF-16 code units, or -1 if the string is 
+ *                nul terminated.
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Confusability of the identifiers is not reported here,
+ *                but through this function's return value.
+ * @return        An integer value with bit(s) set corresponding to
+ *                the type of confusability found, as defined by
+ *                enum USpoofChecks.  Zero is returned if the identifiers
+ *                are not confusable.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_areConfusable(const USpoofChecker *sc,
+                     const UChar *id1, int32_t length1,
+                     const UChar *id2, int32_t length2,
+                     UErrorCode *status);
+
+
+
+/**
+ * Check the whether two specified strings are visually confusable.
+ * The types of confusability to be tested - single script, mixed script,
+ * or whole script - are determined by the check options set for the
+ * USpoofChecker.
+ *
+ * @param sc      The USpoofChecker
+ * @param id1     The first of the two identifiers to be compared for 
+ *                confusability.  The strings are in UTF-8 format.
+ * @param length1 the length of the first identifiers, in bytes, or -1 
+ *                if the string is nul terminated.
+ * @param id2     The second of the two identifiers to be compared for 
+ *                confusability.  The strings are in UTF-8 format.
+ * @param length2 The length of the second string in bytes, or -1 
+ *                if the string is nul terminated.
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Confusability of the strings is not reported here,
+ *                but through this function's return value.
+ * @return        An integer value with bit(s) set corresponding to
+ *                the type of confusability found, as defined by
+ *                enum USpoofChecks.  Zero is returned if the strings
+ *                are not confusable.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_areConfusableUTF8(const USpoofChecker *sc,
+                         const char *id1, int32_t length1,
+                         const char *id2, int32_t length2,
+                         UErrorCode *status);
+
+
+
+
+#if U_SHOW_CPLUSPLUS_API
+/**
+ * Check the whether two specified strings are visually confusable.
+ * The types of confusability to be tested - single script, mixed script,
+ * or whole script - are determined by the check options set for the
+ * USpoofChecker.
+ *
+ * @param sc      The USpoofChecker
+ * @param s1     The first of the two identifiers to be compared for 
+ *                confusability.  The strings are in UTF-8 format.
+ * @param s2     The second of the two identifiers to be compared for 
+ *                confusability.  The strings are in UTF-8 format.
+ * @param status  The error code, set if an error occurred while attempting to
+ *                perform the check.
+ *                Confusability of the identifiers is not reported here,
+ *                but through this function's return value.
+ * @return        An integer value with bit(s) set corresponding to
+ *                the type of confusability found, as defined by
+ *                enum USpoofChecks.  Zero is returned if the identifiers
+ *                are not confusable.
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_areConfusableUnicodeString(const USpoofChecker *sc,
+                                  const icu::UnicodeString &s1,
+                                  const icu::UnicodeString &s2,
+                                  UErrorCode *status);
+#endif
+
+
+/**
+  *  Get the "skeleton" for an identifier.
+  *  Skeletons are a transformation of the input identifier;
+  *  Two identifiers are confusable if their skeletons are identical.
+  *  See Unicode UAX #39 for additional information.
+  *
+  *  Using skeletons directly makes it possible to quickly check
+  *  whether an identifier is confusable with any of some large
+  *  set of existing identifiers, by creating an efficiently
+  *  searchable collection of the skeletons.
+  *
+  * @param sc      The USpoofChecker
+  * @param type    The type of skeleton, corresponding to which
+  *                of the Unicode confusable data tables to use.
+  *                The default is Mixed-Script, Lowercase.
+  *                Allowed options are USPOOF_SINGLE_SCRIPT_CONFUSABLE and
+  *                USPOOF_ANY_CASE_CONFUSABLE.  The two flags may be ORed.
+  * @param id      The input identifier whose skeleton will be computed.
+  * @param length  The length of the input identifier, expressed in 16 bit
+  *                UTF-16 code units, or -1 if the string is zero terminated.
+  * @param dest    The output buffer, to receive the skeleton string.
+  * @param destCapacity  The length of the output buffer, in 16 bit units.
+  *                The destCapacity may be zero, in which case the function will
+  *                return the actual length of the skeleton.
+  * @param status  The error code, set if an error occurred while attempting to
+  *                perform the check.
+  * @return        The length of the skeleton string.  The returned length
+  *                is always that of the complete skeleton, even when the
+  *                supplied buffer is too small (or of zero length)
+  *                
+  * @stable ICU 4.2
+  */
+U_STABLE int32_t U_EXPORT2
+uspoof_getSkeleton(const USpoofChecker *sc,
+                   uint32_t type,
+                   const UChar *id,  int32_t length,
+                   UChar *dest, int32_t destCapacity,
+                   UErrorCode *status);
+    
+/**
+  *  Get the "skeleton" for an identifier.
+  *  Skeletons are a transformation of the input identifier;
+  *  Two identifiers are confusable if their skeletons are identical.
+  *  See Unicode UAX #39 for additional information.
+  *
+  *  Using skeletons directly makes it possible to quickly check
+  *  whether an identifier is confusable with any of some large
+  *  set of existing identifiers, by creating an efficiently
+  *  searchable collection of the skeletons.
+  *
+  * @param sc      The USpoofChecker 
+  * @param type    The type of skeleton, corresponding to which
+  *                of the Unicode confusable data tables to use.
+  *                The default is Mixed-Script, Lowercase.
+  *                Allowed options are USPOOF_SINGLE_SCRIPT_CONFUSABLE and
+  *                USPOOF_ANY_CASE.  The two flags may be ORed.
+  * @param id      The UTF-8 format identifier whose skeleton will be computed.
+  * @param length  The length of the input string, in bytes,
+  *                or -1 if the string is zero terminated.
+  * @param dest    The output buffer, to receive the skeleton string.
+  * @param destCapacity  The length of the output buffer, in bytes.
+  *                The destCapacity may be zero, in which case the function will
+  *                return the actual length of the skeleton.
+  * @param status  The error code, set if an error occurred while attempting to
+  *                perform the check.  Possible Errors include U_INVALID_CHAR_FOUND
+  *                   for invalid UTF-8 sequences, and
+  *                   U_BUFFER_OVERFLOW_ERROR if the destination buffer is too small
+  *                   to hold the complete skeleton.
+  * @return        The length of the skeleton string, in bytes.  The returned length
+  *                is always that of the complete skeleton, even when the
+  *                supplied buffer is too small (or of zero length)
+  *                
+  * @stable ICU 4.2
+  */   
+U_STABLE int32_t U_EXPORT2
+uspoof_getSkeletonUTF8(const USpoofChecker *sc,
+                       uint32_t type,
+                       const char *id,  int32_t length,
+                       char *dest, int32_t destCapacity,
+                       UErrorCode *status);
+    
+#if U_SHOW_CPLUSPLUS_API
+/**
+  *  Get the "skeleton" for an identifier.
+  *  Skeletons are a transformation of the input identifier;
+  *  Two identifiers are confusable if their skeletons are identical.
+  *  See Unicode UAX #39 for additional information.
+  *
+  *  Using skeletons directly makes it possible to quickly check
+  *  whether an identifier is confusable with any of some large
+  *  set of existing identifiers, by creating an efficiently
+  *  searchable collection of the skeletons.
+  *
+  * @param sc      The USpoofChecker.
+  * @param type    The type of skeleton, corresponding to which
+  *                of the Unicode confusable data tables to use.
+  *                The default is Mixed-Script, Lowercase.
+  *                Allowed options are USPOOF_SINGLE_SCRIPT_CONFUSABLE and
+  *                USPOOF_ANY_CASE_CONFUSABLE.  The two flags may be ORed.
+  * @param id      The input identifier whose skeleton will be computed.
+  * @param dest    The output identifier, to receive the skeleton string.
+  * @param status  The error code, set if an error occurred while attempting to
+  *                perform the check.
+  * @return        A reference to the destination (skeleton) string.
+  *                
+  * @stable ICU 4.2
+  */   
+U_I18N_API icu::UnicodeString & U_EXPORT2
+uspoof_getSkeletonUnicodeString(const USpoofChecker *sc,
+                                uint32_t type,
+                                const icu::UnicodeString &id,
+                                icu::UnicodeString &dest,
+                                UErrorCode *status);
+#endif   /* U_SHOW_CPLUSPLUS_API */
+
+/**
+  * Get the set of Candidate Characters for Inclusion in Identifiers, as defined
+  * in Unicode UAX #31, http://www.unicode.org/reports/tr31/#Table_Candidate_Characters_for_Inclusion_in_Identifiers
+  *
+  * The returned set is frozen. Ownership of the set remains with the ICU library; it must not
+  * be deleted by the caller.
+  *
+  * @param status The error code, set if a problem occurs while creating the set.
+  *
+  * @stable ICU 51
+  */
+U_STABLE const USet * U_EXPORT2
+uspoof_getInclusionSet(UErrorCode *status);
+
+/**
+  * Get the set of characters from Recommended Scripts for Inclusion in Identifiers, as defined
+  * in Unicode UAX #31, http://www.unicode.org/reports/tr31/#Table_Recommended_Scripts
+  *
+  * The returned set is frozen. Ownership of the set remains with the ICU library; it must not
+  * be deleted by the caller.
+  *
+  * @param status The error code, set if a problem occurs while creating the set.
+  *
+  * @stable ICU 51
+  */
+U_STABLE const USet * U_EXPORT2
+uspoof_getRecommendedSet(UErrorCode *status);
+
+#if U_SHOW_CPLUSPLUS_API
+
+/**
+  * Get the set of Candidate Characters for Inclusion in Identifiers, as defined
+  * in Unicode UAX #31, http://www.unicode.org/reports/tr31/#Table_Candidate_Characters_for_Inclusion_in_Identifiers
+  *
+  * The returned set is frozen. Ownership of the set remains with the ICU library; it must not
+  * be deleted by the caller.
+  *
+  * @param status The error code, set if a problem occurs while creating the set.
+  *
+  * @stable ICU 51
+  */
+U_STABLE const icu::UnicodeSet * U_EXPORT2
+uspoof_getInclusionUnicodeSet(UErrorCode *status);
+
+/**
+  * Get the set of characters from Recommended Scripts for Inclusion in Identifiers, as defined
+  * in Unicode UAX #31, http://www.unicode.org/reports/tr31/#Table_Recommended_Scripts
+  *
+  * The returned set is frozen. Ownership of the set remains with the ICU library; it must not
+  * be deleted by the caller.
+  *
+  * @param status The error code, set if a problem occurs while creating the set.
+  *
+  * @stable ICU 51
+  */
+U_STABLE const icu::UnicodeSet * U_EXPORT2
+uspoof_getRecommendedUnicodeSet(UErrorCode *status);
+
+#endif /* U_SHOW_CPLUSPLUS_API */
+
+/**
+ * Serialize the data for a spoof detector into a chunk of memory.
+ * The flattened spoof detection tables can later be used to efficiently
+ * instantiate a new Spoof Detector.
+ *
+ * The serialized spoof checker includes only the data compiled from the
+ * Unicode data tables by uspoof_openFromSource(); it does not include 
+ * include any other state or configuration that may have been set.
+ *
+ * @param sc   the Spoof Detector whose data is to be serialized.
+ * @param data a pointer to 32-bit-aligned memory to be filled with the data,
+ *             can be NULL if capacity==0
+ * @param capacity the number of bytes available at data,
+ *                 or 0 for preflighting
+ * @param status an in/out ICU UErrorCode; possible errors include:
+ * - U_BUFFER_OVERFLOW_ERROR if the data storage block is too small for serialization
+ * - U_ILLEGAL_ARGUMENT_ERROR  the data or capacity parameters are bad
+ * @return the number of bytes written or needed for the spoof data
+ *
+ * @see utrie2_openFromSerialized()
+ * @stable ICU 4.2
+ */
+U_STABLE int32_t U_EXPORT2
+uspoof_serialize(USpoofChecker *sc,
+                 void *data, int32_t capacity,
+                 UErrorCode *status);
+
+
+#endif
+
+#endif   /* USPOOF_H */