pango 0.90.5-x86-mingw32 → 0.90.6-x86-mingw32

data/vendor/local/include/freetype2/freetype/ftmoderr.h

@@ -1,155 +0,0 @@
-/***************************************************************************/
-/*                                                                         */
-/*  ftmoderr.h                                                             */
-/*                                                                         */
-/*    FreeType module error offsets (specification).                       */
-/*                                                                         */
-/*  Copyright 2001, 2002, 2003, 2004, 2005 by                              */
-/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
-/*                                                                         */
-/*  This file is part of the FreeType project, and may only be used,       */
-/*  modified, and distributed under the terms of the FreeType project      */
-/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
-/*  this file you indicate that you have read the license and              */
-/*  understand and accept it fully.                                        */
-/*                                                                         */
-/***************************************************************************/
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* This file is used to define the FreeType module error offsets.        */
-  /*                                                                       */
-  /* The lower byte gives the error code, the higher byte gives the        */
-  /* module.  The base module has error offset 0.  For example, the error  */
-  /* `FT_Err_Invalid_File_Format' has value 0x003, the error               */
-  /* `TT_Err_Invalid_File_Format' has value 0x1103, the error              */
-  /* `T1_Err_Invalid_File_Format' has value 0x1203, etc.                   */
-  /*                                                                       */
-  /* Undefine the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in ftoption.h   */
-  /* to make the higher byte always zero (disabling the module error       */
-  /* mechanism).                                                           */
-  /*                                                                       */
-  /* It can also be used to create a module error message table easily     */
-  /* with something like                                                   */
-  /*                                                                       */
-  /*   {                                                                   */
-  /*     #undef __FTMODERR_H__                                             */
-  /*     #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },         */
-  /*     #define FT_MODERR_START_LIST     {                                */
-  /*     #define FT_MODERR_END_LIST       { 0, 0 } };                      */
-  /*                                                                       */
-  /*     const struct                                                      */
-  /*     {                                                                 */
-  /*       int          mod_err_offset;                                    */
-  /*       const char*  mod_err_msg                                        */
-  /*     } ft_mod_errors[] =                                               */
-  /*                                                                       */
-  /*     #include FT_MODULE_ERRORS_H                                       */
-  /*   }                                                                   */
-  /*                                                                       */
-  /* To use such a table, all errors must be ANDed with 0xFF00 to remove   */
-  /* the error code.                                                       */
-  /*                                                                       */
-  /*************************************************************************/
-
-
-#ifndef __FTMODERR_H__
-#define __FTMODERR_H__
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****                       SETUP MACROS                      *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#undef  FT_NEED_EXTERN_C
-
-#ifndef FT_MODERRDEF
-
-#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
-#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
-#else
-#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
-#endif
-
-#define FT_MODERR_START_LIST  enum {
-#define FT_MODERR_END_LIST    FT_Mod_Err_Max };
-
-#ifdef __cplusplus
-#define FT_NEED_EXTERN_C
-  extern "C" {
-#endif
-
-#endif /* !FT_MODERRDEF */
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****               LIST MODULE ERROR BASES                   *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#ifdef FT_MODERR_START_LIST
-  FT_MODERR_START_LIST
-#endif
-
-
-  FT_MODERRDEF( Base,      0x000, "base module" )
-  FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
-  FT_MODERRDEF( BDF,       0x200, "BDF module" )
-  FT_MODERRDEF( Cache,     0x300, "cache module" )
-  FT_MODERRDEF( CFF,       0x400, "CFF module" )
-  FT_MODERRDEF( CID,       0x500, "CID module" )
-  FT_MODERRDEF( Gzip,      0x600, "Gzip module" )
-  FT_MODERRDEF( LZW,       0x700, "LZW module" )
-  FT_MODERRDEF( OTvalid,   0x800, "OpenType validation module" )
-  FT_MODERRDEF( PCF,       0x900, "PCF module" )
-  FT_MODERRDEF( PFR,       0xA00, "PFR module" )
-  FT_MODERRDEF( PSaux,     0xB00, "PS auxiliary module" )
-  FT_MODERRDEF( PShinter,  0xC00, "PS hinter module" )
-  FT_MODERRDEF( PSnames,   0xD00, "PS names module" )
-  FT_MODERRDEF( Raster,    0xE00, "raster module" )
-  FT_MODERRDEF( SFNT,      0xF00, "SFNT module" )
-  FT_MODERRDEF( Smooth,   0x1000, "smooth raster module" )
-  FT_MODERRDEF( TrueType, 0x1100, "TrueType module" )
-  FT_MODERRDEF( Type1,    0x1200, "Type 1 module" )
-  FT_MODERRDEF( Type42,   0x1300, "Type 42 module" )
-  FT_MODERRDEF( Winfonts, 0x1400, "Windows FON/FNT module" )
-
-
-#ifdef FT_MODERR_END_LIST
-  FT_MODERR_END_LIST
-#endif
-
-
-  /*******************************************************************/
-  /*******************************************************************/
-  /*****                                                         *****/
-  /*****                      CLEANUP                            *****/
-  /*****                                                         *****/
-  /*******************************************************************/
-  /*******************************************************************/
-
-
-#ifdef FT_NEED_EXTERN_C
-  }
-#endif
-
-#undef FT_MODERR_START_LIST
-#undef FT_MODERR_END_LIST
-#undef FT_MODERRDEF
-#undef FT_NEED_EXTERN_C
-
-
-#endif /* __FTMODERR_H__ */
-
-
-/* END */

data/vendor/local/include/freetype2/freetype/ftotval.h

@@ -1,203 +0,0 @@
-/***************************************************************************/
-/*                                                                         */
-/*  ftotval.h                                                              */
-/*                                                                         */
-/*    FreeType API for validating OpenType tables (specification).         */
-/*                                                                         */
-/*  Copyright 2004, 2005, 2006, 2007 by                                    */
-/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
-/*                                                                         */
-/*  This file is part of the FreeType project, and may only be used,       */
-/*  modified, and distributed under the terms of the FreeType project      */
-/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
-/*  this file you indicate that you have read the license and              */
-/*  understand and accept it fully.                                        */
-/*                                                                         */
-/***************************************************************************/
-
-
-/***************************************************************************/
-/*                                                                         */
-/*                                                                         */
-/* Warning: This module might be moved to a different library in the       */
-/*          future to avoid a tight dependency between FreeType and the    */
-/*          OpenType specification.                                        */
-/*                                                                         */
-/*                                                                         */
-/***************************************************************************/
-
-
-#ifndef __FTOTVAL_H__
-#define __FTOTVAL_H__
-
-#include <ft2build.h>
-#include FT_FREETYPE_H
-
-#ifdef FREETYPE_H
-#error "freetype.h of FreeType 1 has been loaded!"
-#error "Please fix the directory search order for header files"
-#error "so that freetype.h of FreeType 2 is found first."
-#endif
-
-
-FT_BEGIN_HEADER
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Section>                                                             */
-  /*    ot_validation                                                      */
-  /*                                                                       */
-  /* <Title>                                                               */
-  /*    OpenType Validation                                                */
-  /*                                                                       */
-  /* <Abstract>                                                            */
-  /*    An API to validate OpenType tables.                                */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    This section contains the declaration of functions to validate     */
-  /*    some OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).         */
-  /*                                                                       */
-  /*************************************************************************/
-
-
- /**********************************************************************
-  *
-  * @enum:
-  *    FT_VALIDATE_OTXXX
-  *
-  * @description:
-  *    A list of bit-field constants used with @FT_OpenType_Validate to
-  *    indicate which OpenType tables should be validated.
-  *
-  * @values:
-  *    FT_VALIDATE_BASE ::
-  *      Validate BASE table.
-  *
-  *    FT_VALIDATE_GDEF ::
-  *      Validate GDEF table.
-  *
-  *    FT_VALIDATE_GPOS ::
-  *      Validate GPOS table.
-  *
-  *    FT_VALIDATE_GSUB ::
-  *      Validate GSUB table.
-  *
-  *    FT_VALIDATE_JSTF ::
-  *      Validate JSTF table.
-  *
-  *    FT_VALIDATE_MATH ::
-  *      Validate MATH table.
-  *
-  *    FT_VALIDATE_OT ::
-  *      Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
-  *
-  */
-#define FT_VALIDATE_BASE  0x0100
-#define FT_VALIDATE_GDEF  0x0200
-#define FT_VALIDATE_GPOS  0x0400
-#define FT_VALIDATE_GSUB  0x0800
-#define FT_VALIDATE_JSTF  0x1000
-#define FT_VALIDATE_MATH  0x2000
-
-#define FT_VALIDATE_OT  FT_VALIDATE_BASE | \
-                        FT_VALIDATE_GDEF | \
-                        FT_VALIDATE_GPOS | \
-                        FT_VALIDATE_GSUB | \
-                        FT_VALIDATE_JSTF | \
-                        FT_VALIDATE_MATH
-
-  /* */
-
- /**********************************************************************
-  *
-  * @function:
-  *    FT_OpenType_Validate
-  *
-  * @description:
-  *    Validate various OpenType tables to assure that all offsets and
-  *    indices are valid.  The idea is that a higher-level library which
-  *    actually does the text layout can access those tables without
-  *    error checking (which can be quite time consuming).
-  *
-  * @input:
-  *    face ::
-  *       A handle to the input face.
-  *
-  *    validation_flags ::
-  *       A bit field which specifies the tables to be validated.  See
-  *       @FT_VALIDATE_OTXXX for possible values.
-  *
-  * @output:
-  *    BASE_table ::
-  *       A pointer to the BASE table.
-  *
-  *    GDEF_table ::
-  *       A pointer to the GDEF table.
-  *
-  *    GPOS_table ::
-  *       A pointer to the GPOS table.
-  *
-  *    GSUB_table ::
-  *       A pointer to the GSUB table.
-  *
-  *    JSTF_table ::
-  *       A pointer to the JSTF table.
-  *
-  * @return:
-  *   FreeType error code.  0~means success.
-  *
-  * @note:
-  *   This function only works with OpenType fonts, returning an error
-  *   otherwise.
-  *
-  *   After use, the application should deallocate the five tables with
-  *   @FT_OpenType_Free.  A NULL value indicates that the table either
-  *   doesn't exist in the font, or the application hasn't asked for
-  *   validation.
-  */
-  FT_EXPORT( FT_Error )
-  FT_OpenType_Validate( FT_Face    face,
-                        FT_UInt    validation_flags,
-                        FT_Bytes  *BASE_table,
-                        FT_Bytes  *GDEF_table,
-                        FT_Bytes  *GPOS_table,
-                        FT_Bytes  *GSUB_table,
-                        FT_Bytes  *JSTF_table );
-
-  /* */
-
- /**********************************************************************
-  *
-  * @function:
-  *    FT_OpenType_Free
-  *
-  * @description:
-  *    Free the buffer allocated by OpenType validator.
-  *
-  * @input:
-  *    face ::
-  *       A handle to the input face.
-  *
-  *    table ::
-  *       The pointer to the buffer that is allocated by
-  *       @FT_OpenType_Validate.
-  *
-  * @note:
-  *   This function must be used to free the buffer allocated by
-  *   @FT_OpenType_Validate only.
-  */
-  FT_EXPORT( void )
-  FT_OpenType_Free( FT_Face   face,
-                    FT_Bytes  table );
-
-
- /* */
-
-
-FT_END_HEADER
-
-#endif /* __FTOTVAL_H__ */
-
-
-/* END */

data/vendor/local/include/freetype2/freetype/ftoutln.h

@@ -1,537 +0,0 @@
-/***************************************************************************/
-/*                                                                         */
-/*  ftoutln.h                                                              */
-/*                                                                         */
-/*    Support for the FT_Outline type used to store glyph shapes of        */
-/*    most scalable font formats (specification).                          */
-/*                                                                         */
-/*  Copyright 1996-2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010 by */
-/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
-/*                                                                         */
-/*  This file is part of the FreeType project, and may only be used,       */
-/*  modified, and distributed under the terms of the FreeType project      */
-/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
-/*  this file you indicate that you have read the license and              */
-/*  understand and accept it fully.                                        */
-/*                                                                         */
-/***************************************************************************/
-
-
-#ifndef __FTOUTLN_H__
-#define __FTOUTLN_H__
-
-
-#include <ft2build.h>
-#include FT_FREETYPE_H
-
-#ifdef FREETYPE_H
-#error "freetype.h of FreeType 1 has been loaded!"
-#error "Please fix the directory search order for header files"
-#error "so that freetype.h of FreeType 2 is found first."
-#endif
-
-
-FT_BEGIN_HEADER
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Section>                                                             */
-  /*    outline_processing                                                 */
-  /*                                                                       */
-  /* <Title>                                                               */
-  /*    Outline Processing                                                 */
-  /*                                                                       */
-  /* <Abstract>                                                            */
-  /*    Functions to create, transform, and render vectorial glyph images. */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    This section contains routines used to create and destroy scalable */
-  /*    glyph images known as `outlines'.  These can also be measured,     */
-  /*    transformed, and converted into bitmaps and pixmaps.               */
-  /*                                                                       */
-  /* <Order>                                                               */
-  /*    FT_Outline                                                         */
-  /*    FT_OUTLINE_FLAGS                                                   */
-  /*    FT_Outline_New                                                     */
-  /*    FT_Outline_Done                                                    */
-  /*    FT_Outline_Copy                                                    */
-  /*    FT_Outline_Translate                                               */
-  /*    FT_Outline_Transform                                               */
-  /*    FT_Outline_Embolden                                                */
-  /*    FT_Outline_Reverse                                                 */
-  /*    FT_Outline_Check                                                   */
-  /*                                                                       */
-  /*    FT_Outline_Get_CBox                                                */
-  /*    FT_Outline_Get_BBox                                                */
-  /*                                                                       */
-  /*    FT_Outline_Get_Bitmap                                              */
-  /*    FT_Outline_Render                                                  */
-  /*                                                                       */
-  /*    FT_Outline_Decompose                                               */
-  /*    FT_Outline_Funcs                                                   */
-  /*    FT_Outline_MoveTo_Func                                             */
-  /*    FT_Outline_LineTo_Func                                             */
-  /*    FT_Outline_ConicTo_Func                                            */
-  /*    FT_Outline_CubicTo_Func                                            */
-  /*                                                                       */
-  /*************************************************************************/
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Decompose                                               */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Walk over an outline's structure to decompose it into individual   */
-  /*    segments and Bézier arcs.  This function also emits `move to'      */
-  /*    operations to indicate the start of new contours in the outline.   */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    outline        :: A pointer to the source target.                  */
-  /*                                                                       */
-  /*    func_interface :: A table of `emitters', i.e., function pointers   */
-  /*                      called during decomposition to indicate path     */
-  /*                      operations.                                      */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    user           :: A typeless pointer which is passed to each       */
-  /*                      emitter during the decomposition.  It can be     */
-  /*                      used to store the state during the               */
-  /*                      decomposition.                                   */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Decompose( FT_Outline*              outline,
-                        const FT_Outline_Funcs*  func_interface,
-                        void*                    user );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_New                                                     */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Create a new outline of a given size.                              */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    library     :: A handle to the library object from where the       */
-  /*                   outline is allocated.  Note however that the new    */
-  /*                   outline will *not* necessarily be *freed*, when     */
-  /*                   destroying the library, by @FT_Done_FreeType.       */
-  /*                                                                       */
-  /*    numPoints   :: The maximal number of points within the outline.    */
-  /*                                                                       */
-  /*    numContours :: The maximal number of contours within the outline.  */
-  /*                                                                       */
-  /* <Output>                                                              */
-  /*    anoutline   :: A handle to the new outline.                        */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    The reason why this function takes a `library' parameter is simply */
-  /*    to use the library's memory allocator.                             */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_New( FT_Library   library,
-                  FT_UInt      numPoints,
-                  FT_Int       numContours,
-                  FT_Outline  *anoutline );
-
-
-  FT_EXPORT( FT_Error )
-  FT_Outline_New_Internal( FT_Memory    memory,
-                           FT_UInt      numPoints,
-                           FT_Int       numContours,
-                           FT_Outline  *anoutline );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Done                                                    */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Destroy an outline created with @FT_Outline_New.                   */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    library :: A handle of the library object used to allocate the     */
-  /*               outline.                                                */
-  /*                                                                       */
-  /*    outline :: A pointer to the outline object to be discarded.        */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    If the outline's `owner' field is not set, only the outline        */
-  /*    descriptor will be released.                                       */
-  /*                                                                       */
-  /*    The reason why this function takes an `library' parameter is       */
-  /*    simply to use ft_mem_free().                                       */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Done( FT_Library   library,
-                   FT_Outline*  outline );
-
-
-  FT_EXPORT( FT_Error )
-  FT_Outline_Done_Internal( FT_Memory    memory,
-                            FT_Outline*  outline );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Check                                                   */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Check the contents of an outline descriptor.                       */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    outline :: A handle to a source outline.                           */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Check( FT_Outline*  outline );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Get_CBox                                                */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Return an outline's `control box'.  The control box encloses all   */
-  /*    the outline's points, including Bézier control points.  Though it  */
-  /*    coincides with the exact bounding box for most glyphs, it can be   */
-  /*    slightly larger in some situations (like when rotating an outline  */
-  /*    which contains Bézier outside arcs).                               */
-  /*                                                                       */
-  /*    Computing the control box is very fast, while getting the bounding */
-  /*    box can take much more time as it needs to walk over all segments  */
-  /*    and arcs in the outline.  To get the latter, you can use the       */
-  /*    `ftbbox' component which is dedicated to this single task.         */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    outline :: A pointer to the source outline descriptor.             */
-  /*                                                                       */
-  /* <Output>                                                              */
-  /*    acbox   :: The outline's control box.                              */
-  /*                                                                       */
-  FT_EXPORT( void )
-  FT_Outline_Get_CBox( const FT_Outline*  outline,
-                       FT_BBox           *acbox );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Translate                                               */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Apply a simple translation to the points of an outline.            */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    outline :: A pointer to the target outline descriptor.             */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    xOffset :: The horizontal offset.                                  */
-  /*                                                                       */
-  /*    yOffset :: The vertical offset.                                    */
-  /*                                                                       */
-  FT_EXPORT( void )
-  FT_Outline_Translate( const FT_Outline*  outline,
-                        FT_Pos             xOffset,
-                        FT_Pos             yOffset );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Copy                                                    */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Copy an outline into another one.  Both objects must have the      */
-  /*    same sizes (number of points & number of contours) when this       */
-  /*    function is called.                                                */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    source :: A handle to the source outline.                          */
-  /*                                                                       */
-  /* <Output>                                                              */
-  /*    target :: A handle to the target outline.                          */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Copy( const FT_Outline*  source,
-                   FT_Outline        *target );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Transform                                               */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Apply a simple 2x2 matrix to all of an outline's points.  Useful   */
-  /*    for applying rotations, slanting, flipping, etc.                   */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    outline :: A pointer to the target outline descriptor.             */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    matrix  :: A pointer to the transformation matrix.                 */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    You can use @FT_Outline_Translate if you need to translate the     */
-  /*    outline's points.                                                  */
-  /*                                                                       */
-  FT_EXPORT( void )
-  FT_Outline_Transform( const FT_Outline*  outline,
-                        const FT_Matrix*   matrix );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Embolden                                                */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Embolden an outline.  The new outline will be at most 4~times      */
-  /*    `strength' pixels wider and higher.  You may think of the left and */
-  /*    bottom borders as unchanged.                                       */
-  /*                                                                       */
-  /*    Negative `strength' values to reduce the outline thickness are     */
-  /*    possible also.                                                     */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    outline  :: A handle to the target outline.                        */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    strength :: How strong the glyph is emboldened.  Expressed in      */
-  /*                26.6 pixel format.                                     */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    The used algorithm to increase or decrease the thickness of the    */
-  /*    glyph doesn't change the number of points; this means that certain */
-  /*    situations like acute angles or intersections are sometimes        */
-  /*    handled incorrectly.                                               */
-  /*                                                                       */
-  /*    If you need `better' metrics values you should call                */
-  /*    @FT_Outline_Get_CBox ot @FT_Outline_Get_BBox.                      */
-  /*                                                                       */
-  /*    Example call:                                                      */
-  /*                                                                       */
-  /*    {                                                                  */
-  /*      FT_Load_Glyph( face, index, FT_LOAD_DEFAULT );                   */
-  /*      if ( face->slot->format == FT_GLYPH_FORMAT_OUTLINE )             */
-  /*        FT_Outline_Embolden( &face->slot->outline, strength );         */
-  /*    }                                                                  */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Embolden( FT_Outline*  outline,
-                       FT_Pos       strength );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Reverse                                                 */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Reverse the drawing direction of an outline.  This is used to      */
-  /*    ensure consistent fill conventions for mirrored glyphs.            */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    outline :: A pointer to the target outline descriptor.             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in     */
-  /*    the outline's `flags' field.                                       */
-  /*                                                                       */
-  /*    It shouldn't be used by a normal client application, unless it     */
-  /*    knows what it is doing.                                            */
-  /*                                                                       */
-  FT_EXPORT( void )
-  FT_Outline_Reverse( FT_Outline*  outline );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Get_Bitmap                                              */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Render an outline within a bitmap.  The outline's image is simply  */
-  /*    OR-ed to the target bitmap.                                        */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    library :: A handle to a FreeType library object.                  */
-  /*                                                                       */
-  /*    outline :: A pointer to the source outline descriptor.             */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    abitmap :: A pointer to the target bitmap descriptor.              */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    This function does NOT CREATE the bitmap, it only renders an       */
-  /*    outline image within the one you pass to it!  Consequently, the    */
-  /*    various fields in `abitmap' should be set accordingly.             */
-  /*                                                                       */
-  /*    It will use the raster corresponding to the default glyph format.  */
-  /*                                                                       */
-  /*    The value of the `num_grays' field in `abitmap' is ignored.  If    */
-  /*    you select the gray-level rasterizer, and you want less than 256   */
-  /*    gray levels, you have to use @FT_Outline_Render directly.          */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Get_Bitmap( FT_Library        library,
-                         FT_Outline*       outline,
-                         const FT_Bitmap  *abitmap );
-
-
-  /*************************************************************************/
-  /*                                                                       */
-  /* <Function>                                                            */
-  /*    FT_Outline_Render                                                  */
-  /*                                                                       */
-  /* <Description>                                                         */
-  /*    Render an outline within a bitmap using the current scan-convert.  */
-  /*    This function uses an @FT_Raster_Params structure as an argument,  */
-  /*    allowing advanced features like direct composition, translucency,  */
-  /*    etc.                                                               */
-  /*                                                                       */
-  /* <Input>                                                               */
-  /*    library :: A handle to a FreeType library object.                  */
-  /*                                                                       */
-  /*    outline :: A pointer to the source outline descriptor.             */
-  /*                                                                       */
-  /* <InOut>                                                               */
-  /*    params  :: A pointer to an @FT_Raster_Params structure used to     */
-  /*               describe the rendering operation.                       */
-  /*                                                                       */
-  /* <Return>                                                              */
-  /*    FreeType error code.  0~means success.                             */
-  /*                                                                       */
-  /* <Note>                                                                */
-  /*    You should know what you are doing and how @FT_Raster_Params works */
-  /*    to use this function.                                              */
-  /*                                                                       */
-  /*    The field `params.source' will be set to `outline' before the scan */
-  /*    converter is called, which means that the value you give to it is  */
-  /*    actually ignored.                                                  */
-  /*                                                                       */
-  /*    The gray-level rasterizer always uses 256 gray levels.  If you     */
-  /*    want less gray levels, you have to provide your own span callback. */
-  /*    See the @FT_RASTER_FLAG_DIRECT value of the `flags' field in the   */
-  /*    @FT_Raster_Params structure for more details.                      */
-  /*                                                                       */
-  FT_EXPORT( FT_Error )
-  FT_Outline_Render( FT_Library         library,
-                     FT_Outline*        outline,
-                     FT_Raster_Params*  params );
-
-
- /**************************************************************************
-  *
-  * @enum:
-  *   FT_Orientation
-  *
-  * @description:
-  *   A list of values used to describe an outline's contour orientation.
-  *
-  *   The TrueType and PostScript specifications use different conventions
-  *   to determine whether outline contours should be filled or unfilled.
-  *
-  * @values:
-  *   FT_ORIENTATION_TRUETYPE ::
-  *     According to the TrueType specification, clockwise contours must
-  *     be filled, and counter-clockwise ones must be unfilled.
-  *
-  *   FT_ORIENTATION_POSTSCRIPT ::
-  *     According to the PostScript specification, counter-clockwise contours
-  *     must be filled, and clockwise ones must be unfilled.
-  *
-  *   FT_ORIENTATION_FILL_RIGHT ::
-  *     This is identical to @FT_ORIENTATION_TRUETYPE, but is used to
-  *     remember that in TrueType, everything that is to the right of
-  *     the drawing direction of a contour must be filled.
-  *
-  *   FT_ORIENTATION_FILL_LEFT ::
-  *     This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to
-  *     remember that in PostScript, everything that is to the left of
-  *     the drawing direction of a contour must be filled.
-  *
-  *   FT_ORIENTATION_NONE ::
-  *     The orientation cannot be determined.  That is, different parts of
-  *     the glyph have different orientation.
-  *
-  */
-  typedef enum  FT_Orientation_
-  {
-    FT_ORIENTATION_TRUETYPE   = 0,
-    FT_ORIENTATION_POSTSCRIPT = 1,
-    FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE,
-    FT_ORIENTATION_FILL_LEFT  = FT_ORIENTATION_POSTSCRIPT,
-    FT_ORIENTATION_NONE
-
-  } FT_Orientation;
-
-
- /**************************************************************************
-  *
-  * @function:
-  *   FT_Outline_Get_Orientation
-  *
-  * @description:
-  *   This function analyzes a glyph outline and tries to compute its
-  *   fill orientation (see @FT_Orientation).  This is done by computing
-  *   the direction of each global horizontal and/or vertical extrema
-  *   within the outline.
-  *
-  *   Note that this will return @FT_ORIENTATION_TRUETYPE for empty
-  *   outlines.
-  *
-  * @input:
-  *   outline ::
-  *     A handle to the source outline.
-  *
-  * @return:
-  *   The orientation.
-  *
-  */
-  FT_EXPORT( FT_Orientation )
-  FT_Outline_Get_Orientation( FT_Outline*  outline );
-
-
-  /* */
-
-
-FT_END_HEADER
-
-#endif /* __FTOUTLN_H__ */
-
-
-/* END */
-
-
-/* Local Variables: */
-/* coding: utf-8    */
-/* End:             */