pangea-core 0.2.0 → 0.3.0

data/vendor/bundle/ruby/3.3.0/gems/simplecov-0.22.0/lib/simplecov.rb

@@ -0,0 +1,470 @@
+# frozen_string_literal: true
+
+require "English"
+
+# Coverage may be inaccurate under JRUBY.
+if defined?(JRUBY_VERSION) && defined?(JRuby) && !org.jruby.RubyInstanceConfig.FULL_TRACE_ENABLED
+
+  # @see https://github.com/jruby/jruby/issues/1196
+  # @see https://github.com/metricfu/metric_fu/pull/226
+  # @see https://github.com/simplecov-ruby/simplecov/issues/420
+  # @see https://github.com/simplecov-ruby/simplecov/issues/86
+  # @see https://jira.codehaus.org/browse/JRUBY-6106
+
+  warn 'Coverage may be inaccurate; set the "--debug" command line option,' \
+    ' or do JRUBY_OPTS="--debug"' \
+    ' or set the "debug.fullTrace=true" option in your .jrubyrc'
+end
+
+#
+# Code coverage for ruby. Please check out README for a full introduction.
+#
+module SimpleCov
+  class << self
+    attr_accessor :running, :pid
+
+    # Basically, should we take care of at_exit behavior or something else?
+    # Used by the minitest plugin. See lib/minitest/simplecov_plugin.rb
+    attr_accessor :external_at_exit
+    alias external_at_exit? external_at_exit
+
+    #
+    # Sets up SimpleCov to run against your project.
+    # You can optionally specify a profile to use as well as configuration with a block:
+    #   SimpleCov.start
+    #    OR
+    #   SimpleCov.start 'rails' # using rails profile
+    #    OR
+    #   SimpleCov.start do
+    #     add_filter 'test'
+    #   end
+    #     OR
+    #   SimpleCov.start 'rails' do
+    #     add_filter 'test'
+    #   end
+    #
+    # Please check out the RDoc for SimpleCov::Configuration to find about available config options
+    #
+    def start(profile = nil, &block)
+      require "coverage"
+      initial_setup(profile, &block)
+      require_relative "./simplecov/process" if SimpleCov.enabled_for_subprocesses? &&
+                                                ::Process.respond_to?(:fork)
+
+      make_parallel_tests_available
+
+      @result = nil
+      self.pid = Process.pid
+
+      start_coverage_measurement
+    end
+
+    #
+    # Collate a series of SimpleCov result files into a single SimpleCov output.
+    #
+    # You can optionally specify configuration with a block:
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"]
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' # using rails profile
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"] do
+    #     add_filter 'test'
+    #   end
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' do
+    #     add_filter 'test'
+    #   end
+    #
+    # Please check out the RDoc for SimpleCov::Configuration to find about
+    # available config options, or checkout the README for more in-depth
+    # information about coverage collation
+    #
+    # By default `collate` ignores the merge_timeout so all results of all files specified will be
+    # merged together. If you want to honor the merge_timeout then provide the keyword argument
+    # `ignore_timeout: false`.
+    #
+    def collate(result_filenames, profile = nil, ignore_timeout: true, &block)
+      raise "There are no reports to be merged" if result_filenames.empty?
+
+      initial_setup(profile, &block)
+
+      # Use the ResultMerger to produce a single, merged result, ready to use.
+      @result = ResultMerger.merge_and_store(*result_filenames, ignore_timeout: ignore_timeout)
+
+      run_exit_tasks!
+    end
+
+    #
+    # Returns the result for the current coverage run, merging it across test suites
+    # from cache using SimpleCov::ResultMerger if use_merging is activated (default)
+    #
+    def result
+      return @result if result?
+
+      # Collect our coverage result
+      process_coverage_result if running
+
+      # If we're using merging of results, store the current result
+      # first (if there is one), then merge the results and return those
+      if use_merging
+        wait_for_other_processes
+        SimpleCov::ResultMerger.store_result(@result) if result?
+        @result = SimpleCov::ResultMerger.merged_result
+      end
+
+      @result
+    ensure
+      self.running = false
+    end
+
+    #
+    # Returns nil if the result has not been computed
+    # Otherwise, returns the result
+    #
+    def result?
+      defined?(@result) && @result
+    end
+
+    #
+    # Applies the configured filters to the given array of SimpleCov::SourceFile items
+    #
+    def filtered(files)
+      result = files.clone
+      filters.each do |filter|
+        result = result.reject { |source_file| filter.matches?(source_file) }
+      end
+      SimpleCov::FileList.new result
+    end
+
+    #
+    # Applies the configured groups to the given array of SimpleCov::SourceFile items
+    #
+    def grouped(files)
+      grouped = {}
+      grouped_files = []
+      groups.each do |name, filter|
+        grouped[name] = SimpleCov::FileList.new(files.select { |source_file| filter.matches?(source_file) })
+        grouped_files += grouped[name]
+      end
+      if !groups.empty? && !(other_files = files.reject { |source_file| grouped_files.include?(source_file) }).empty?
+        grouped["Ungrouped"] = SimpleCov::FileList.new(other_files)
+      end
+      grouped
+    end
+
+    #
+    # Applies the profile of given name on SimpleCov configuration
+    #
+    def load_profile(name)
+      profiles.load(name)
+    end
+
+    def load_adapter(name)
+      warn "#{Kernel.caller.first}: [DEPRECATION] #load_adapter is deprecated. Use #load_profile instead."
+      load_profile(name)
+    end
+
+    #
+    # Clear out the previously cached .result. Primarily useful in testing
+    #
+    def clear_result
+      @result = nil
+    end
+
+    def at_exit_behavior
+      # If we are in a different process than called start, don't interfere.
+      return if SimpleCov.pid != Process.pid
+
+      # If SimpleCov is no longer running then don't run exit tasks
+      SimpleCov.run_exit_tasks! if SimpleCov.running
+    end
+
+    # @api private
+    #
+    # Called from at_exit block
+    #
+    def run_exit_tasks!
+      error_exit_status = exit_status_from_exception
+
+      at_exit.call
+
+      exit_and_report_previous_error(error_exit_status) if previous_error?(error_exit_status)
+      process_results_and_report_error if ready_to_process_results?
+    end
+
+    #
+    # @api private
+    #
+    # Returns the exit status from the exit exception
+    #
+    def exit_status_from_exception
+      # Capture the current exception if it exists
+      @exit_exception = $ERROR_INFO
+      return nil unless @exit_exception
+
+      if @exit_exception.is_a?(SystemExit)
+        @exit_exception.status
+      else
+        SimpleCov::ExitCodes::EXCEPTION
+      end
+    end
+
+    # @api private
+    def previous_error?(error_exit_status)
+      # Normally it'd be enough to check for previous error but when running test_unit
+      # status is 0
+      error_exit_status && error_exit_status != SimpleCov::ExitCodes::SUCCESS
+    end
+
+    #
+    # @api private
+    #
+    # Thinking: Move this behavior earlier so if there was an error we do nothing?
+    def exit_and_report_previous_error(exit_status)
+      warn("Stopped processing SimpleCov as a previous error not related to SimpleCov has been detected") if print_error_status
+      Kernel.exit(exit_status)
+    end
+
+    # @api private
+    def ready_to_process_results?
+      final_result_process? && result?
+    end
+
+    def process_results_and_report_error
+      exit_status = process_result(result)
+
+      # Force exit with stored status (see github issue #5)
+      if exit_status.positive?
+        warn("SimpleCov failed with exit #{exit_status} due to a coverage related error") if print_error_status
+        Kernel.exit exit_status
+      end
+    end
+
+    # @api private
+    #
+    # Usage:
+    #   exit_status = SimpleCov.process_result(SimpleCov.result, exit_status)
+    #
+    def process_result(result)
+      result_exit_status = result_exit_status(result)
+      write_last_run(result) if result_exit_status == SimpleCov::ExitCodes::SUCCESS
+      result_exit_status
+    end
+
+    # @api private
+    CoverageLimits = Struct.new(:minimum_coverage, :minimum_coverage_by_file, :maximum_coverage_drop, keyword_init: true)
+    def result_exit_status(result)
+      coverage_limits = CoverageLimits.new(
+        minimum_coverage: minimum_coverage, minimum_coverage_by_file: minimum_coverage_by_file,
+        maximum_coverage_drop: maximum_coverage_drop
+      )
+
+      ExitCodes::ExitCodeHandling.call(result, coverage_limits: coverage_limits)
+    end
+
+    #
+    # @api private
+    #
+    def final_result_process?
+      # checking for ENV["TEST_ENV_NUMBER"] to determine if the tests are being run in parallel
+      !defined?(ParallelTests) || !ENV["TEST_ENV_NUMBER"] || ParallelTests.last_process?
+    end
+
+    #
+    # @api private
+    #
+    def wait_for_other_processes
+      return unless defined?(ParallelTests) && final_result_process?
+
+      ParallelTests.wait_for_other_processes_to_finish
+    end
+
+    #
+    # @api private
+    #
+    def write_last_run(result)
+      SimpleCov::LastRun.write(result:
+        result.coverage_statistics.transform_values do |stats|
+          round_coverage(stats.percent)
+        end)
+    end
+
+    #
+    # @api private
+    #
+    # Rounding down to be extra strict, see #679
+    def round_coverage(coverage)
+      coverage.floor(2)
+    end
+
+  private
+
+    def initial_setup(profile, &block)
+      load_profile(profile) if profile
+      configure(&block) if block_given?
+      self.running = true
+    end
+
+    #
+    # Trigger Coverage.start depends on given config coverage_criterion
+    #
+    # With Positive branch it supports all coverage measurement types
+    # With Negative branch it supports only line coverage measurement type
+    #
+    def start_coverage_measurement
+      # This blog post gives a good run down of the coverage criterias introduced
+      # in Ruby 2.5: https://blog.bigbinary.com/2018/04/11/ruby-2-5-supports-measuring-branch-and-method-coverages.html
+      # There is also a nice writeup of the different coverage criteria made in this
+      # comment  https://github.com/simplecov-ruby/simplecov/pull/692#discussion_r281836176 :
+      # Ruby < 2.5:
+      # https://github.com/ruby/ruby/blob/v1_9_3_374/ext/coverage/coverage.c
+      # traditional mode (Array)
+      #
+      # Ruby 2.5:
+      # https://bugs.ruby-lang.org/issues/13901
+      # https://github.com/ruby/ruby/blob/v2_5_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :all - same as lines + branches + methods
+      #
+      # Ruby >= 2.6:
+      # https://bugs.ruby-lang.org/issues/15022
+      # https://github.com/ruby/ruby/blob/v2_6_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :oneshot_lines - can not be combined with lines
+      # :all - same as lines + branches + methods
+      #
+      if coverage_start_arguments_supported?
+        start_coverage_with_criteria
+      else
+        Coverage.start unless Coverage.running?
+      end
+    end
+
+    def start_coverage_with_criteria
+      start_arguments = coverage_criteria.map do |criterion|
+        [lookup_corresponding_ruby_coverage_name(criterion), true]
+      end.to_h
+
+      start_arguments[:eval] = true if coverage_for_eval_enabled?
+
+      Coverage.start(start_arguments) unless Coverage.running?
+    end
+
+    CRITERION_TO_RUBY_COVERAGE = {
+      branch: :branches,
+      line: :lines
+    }.freeze
+    def lookup_corresponding_ruby_coverage_name(criterion)
+      CRITERION_TO_RUBY_COVERAGE.fetch(criterion)
+    end
+
+    #
+    # Finds files that were to be tracked but were not loaded and initializes
+    # the line-by-line coverage to zero (if relevant) or nil (comments / whitespace etc).
+    #
+    def add_not_loaded_files(result)
+      if tracked_files
+        result = result.dup
+        Dir[tracked_files].each do |file|
+          absolute_path = File.expand_path(file)
+          result[absolute_path] ||= SimulateCoverage.call(absolute_path)
+        end
+      end
+
+      result
+    end
+
+    #
+    # Call steps that handle process coverage result
+    #
+    # @return [Hash]
+    #
+    def process_coverage_result
+      adapt_coverage_result
+      remove_useless_results
+      result_with_not_loaded_files
+    end
+
+    #
+    # Unite the result so it wouldn't matter what coverage type was called
+    #
+    # @return [Hash]
+    #
+    def adapt_coverage_result
+      @result = SimpleCov::ResultAdapter.call(Coverage.result)
+    end
+
+    #
+    # Filter coverage result
+    # The result before filter also has result of coverage for files
+    # are not related to the project like loaded gems coverage.
+    #
+    # @return [Hash]
+    #
+    def remove_useless_results
+      @result = SimpleCov::UselessResultsRemover.call(@result)
+    end
+
+    #
+    # Initialize result with files that are not included by coverage
+    # and added inside the config block
+    #
+    # @return [Hash]
+    #
+    def result_with_not_loaded_files
+      @result = SimpleCov::Result.new(add_not_loaded_files(@result))
+    end
+
+    # parallel_tests isn't always available, see: https://github.com/grosser/parallel_tests/issues/772
+    def make_parallel_tests_available
+      return if defined?(ParallelTests)
+      return unless probably_running_parallel_tests?
+
+      require "parallel_tests"
+    rescue LoadError
+      warn("SimpleCov guessed you were running inside parallel tests but couldn't load it. Please file a bug report with us!")
+    end
+
+    def probably_running_parallel_tests?
+      ENV["TEST_ENV_NUMBER"] && ENV["PARALLEL_TEST_GROUPS"]
+    end
+  end
+end
+
+# requires are down here here for a load order reason I'm not sure what it is about
+require "set"
+require "forwardable"
+require_relative "simplecov/configuration"
+SimpleCov.extend SimpleCov::Configuration
+require_relative "simplecov/coverage_statistics"
+require_relative "simplecov/exit_codes"
+require_relative "simplecov/profiles"
+require_relative "simplecov/source_file/line"
+require_relative "simplecov/source_file/branch"
+require_relative "simplecov/source_file"
+require_relative "simplecov/file_list"
+require_relative "simplecov/result"
+require_relative "simplecov/filter"
+require_relative "simplecov/formatter"
+require_relative "simplecov/last_run"
+require_relative "simplecov/lines_classifier"
+require_relative "simplecov/result_merger"
+require_relative "simplecov/command_guesser"
+require_relative "simplecov/version"
+require_relative "simplecov/result_adapter"
+require_relative "simplecov/combine"
+require_relative "simplecov/combine/branches_combiner"
+require_relative "simplecov/combine/files_combiner"
+require_relative "simplecov/combine/lines_combiner"
+require_relative "simplecov/combine/results_combiner"
+require_relative "simplecov/useless_results_remover"
+require_relative "simplecov/simulate_coverage"
+
+# Load default config
+require_relative "simplecov/defaults" unless ENV["SIMPLECOV_NO_DEFAULTS"]

data/vendor/bundle/ruby/3.3.0/gems/simplecov-html-0.13.2/.document

@@ -0,0 +1,5 @@
+README.rdoc
+lib/**/*.rb
+bin/*
+features/**/*.feature
+LICENSE

data/vendor/bundle/ruby/3.3.0/gems/simplecov-html-0.13.2/CHANGELOG.md

@@ -0,0 +1,114 @@
+0.13.2 (2025-07-16)
+==================
+
+## Misc
+* Stop requiring cgi for Ruby 3.5 compatibility. See [#149](https://github.com/simplecov-ruby/simplecov-html/pull/149) (thanks [@Earlopain](https://github.com/Earlopain)).
+
+0.13.1 (2024-09-09)
+==================
+
+## Misc
+* Drop base64 dependency. See [#144](https://github.com/simplecov-ruby/simplecov-html/pull/144) (thanks [@Earlopain](https://github.com/Earlopain)).
+
+0.13.0 (2024-09-08)
+==================
+
+## Enhancements
+* Cache erb templates when generating report. See [#114](https://github.com/simplecov-ruby/simplecov-html/pull/114) (thanks [@fatkodima](https://github.com/fatkodima)).
+* Print branch coverage with line coverage. See [#103](https://github.com/simplecov-ruby/simplecov-html/pull/103) (thanks [@jeremyevans](https://github.com/jeremyevans)).
+* Add line number anchors. Thanks [@jantman](https://github.com/jantman) for the proposal [#49](https://github.com/simplecov-ruby/simplecov-html/issues/49) and [@nishidayuya](https://github.com/nishidayuya) for the patch [#106](https://github.com/simplecov-ruby/simplecov-html/pull/106)!
+* Add inline assets option. See [#107](https://github.com/simplecov-ruby/simplecov-html/pull/107) (thanks [@frankh](https://github.com/frankh)).
+* Make close button look better. See [#140](https://github.com/simplecov-ruby/simplecov-html/pull/140) (thanks [@anthony0030](https://github.com/anthony0030)).
+* Avoid "permission denied" errors by removing the destination before copying assets [#135](https://github.com/simplecov-ruby/simplecov-html/pull/135) (thanks [@tomeon](https://github.com/tomeon)).
+* Improve clarity of line and branch coverage format. See [#125](https://github.com/simplecov-ruby/simplecov-html/pull/125) (thanks [@joshuapinter](https://github.com/joshuapinter)).
+
+## Bugfixes
+* Avoid loading favicon.png that does not exist. See [#123](https://github.com/simplecov-ruby/simplecov-html/pull/123) (thanks [@yyamanoi1222](https://github.com/yyamanoi1222)).
+
+## Misc
+* Reduced gem size by not including development-only files.
+* Bundle jQuery 3.7.1. See [#108](https://github.com/simplecov-ruby/simplecov-html/issues/108) (thanks [@jgarland79](https://github.com/jgarland79) for reporting the issue).
+
+0.12.3 (2020-09-23)
+==================
+
+## Bugfixes
+* Relax ruby version requirement to work with Ruby 3.0 (next version, current `ruby-head`). Thanks [@byroot](https://github.com/byroot).
+
+0.12.2 (2020-02-27)
+==================
+
+## Bugfixes
+* Refreshing the page while a source file is open works again. Thanks [@HansBug](https://github.com/HansBug) for the report [#94](https://github.com/simplecov-ruby/simplecov-html/issues/94) and [@Tietew](https://github.com/Tietew) for the fix!
+
+0.12.1 (2020-02-23)
+==================
+
+Bugfix release to fix huge bugs that sadly test suit and maintainters didn't catch.
+
+## Bugfixes
+* Disable pagination and with it all files on 2nd page+ being broken/not able to open
+* Fix display of non ASCII characters, for this you have to upgrade to simplecov 0.18.3 though (it's handled in there)
+
+0.12.0 (2020-02-12)
+==================
+
+This release is basically a collection of long standing PRs finally merged.
+Yes it looks different, no it's not a redesign - just a side effect of lots of dependency updates to improve CSP compatibility.
+
+## Enhancements
+* The HTML should now be servable with CSP settings of `default-src 'none'; script-src 'self'; img-src 'self'; style-src 'self';`
+* File list is horizontally scrollable if the space doesn't suffice
+* numbers are now right aligned and displayed with the same number of decimals for easier comparison and reading.
+
+## Bugfixes
+* Make sorting icons appear again
+* close link tag which could cause problems when parsing as xhtml/xml
+* make sure encoding errors won't crash the formatter
+* When viewing a short source file while you have a big file list you will no longer be able to scroll on after the source file has ended
+
+
+
+0.11.0 (2020-01-28)
+=======
+
+This release goes together with simplecov 0.18 to bring branch coverage support to you. Please also check the notes of the beta releases.
+
+## Enhancements
+* Display total branch coverage percentage in the overview (if branch coverage enabled)
+
+0.11.0.beta2 (2020-01-19)
+=======
+
+## Enhancements
+* changed display of branch coverage to be `branch_type: hit_count` which should be more expressive and more intuitive
+* Cached lookup of whether we're doing branch coverage or not (should be faster)
+
+## Bugfixes
+* Fixed sorting of percent column (regression in previous release)
+
+0.11.0.beta1 (2020-01-05)
+========
+
+Changes ruby support to 2.4+, adds branch coverage support. Meant to be used with simplecov 0.18
+
+## Breaking Changes
+* Drops support for EOL'ed ruby versions, new support is ~> 2.4
+
+## Enhancements
+* Support/display of branch coverage from simplecov 0.18.0.beta1, little badges saying `hit_count, positive_or_negative` will appear next to lines if branch coverage is activated. `0, +` means positive branch was never hit, `2, -` means negative branch was hit twice
+* Encoding compatibility errors are now caught and printed out
+
+0.10.2 (2017-08-14)
+========
+
+## Bugfixes
+
+* Allow usage with frozen-string-literal-enabled. See [#56](https://github.com/simplecov-ruby/simplecov-html/pull/56) (thanks @pat)
+
+0.10.1 (2017-05-17)
+========
+
+## Bugfixes
+
+* circumvent a regression that happens in the new JRuby 9.1.9.0 release. See [#53](https://github.com/simplecov-ruby/simplecov-html/pull/53) thanks @koic

data/vendor/bundle/ruby/3.3.0/gems/simplecov-html-0.13.2/LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2010-2013 Christoph Olszowka
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/bundle/ruby/3.3.0/gems/simplecov-html-0.13.2/README.md

@@ -0,0 +1,30 @@
+Default HTML formatter for SimpleCov
+====================================
+
+***Note: To learn more about SimpleCov, check out the main repo at https://github.com/simplecov-ruby/simplecov***
+
+Generates a nice HTML report of your SimpleCov ruby code coverage results on Ruby 2.4+ using client-side Javascript
+quite extensively.
+
+
+Note on Patches/Pull Requests
+-----------------------------
+
+The formatter itself has no actual tests. Instead, it is tested in the cucumber features of simplecov itself. If you
+modify the formatter, please make sure the simplecov test suites still pass by doing the following:
+
+  * Clone simplecov into the parent directory of your simplecov-html checkout
+  * `cd` there, run `bundle`
+  * You should end up with all dev dependencies installed and simplecov-html being used from your disk
+  * Run the tests (units and features)
+
+Please remember to add tests if you add functionality.
+
+**Important:** If you modify the JS/CSS assets, you'll have to precompile them using `rake assets:compile` - otherwise,
+your changes will not be included in your coverage reports.
+
+
+Copyright
+---------
+
+Copyright (c) 2010-2013 Christoph Olszowka. See LICENSE for details.

data/vendor/bundle/ruby/3.3.0/gems/simplecov-html-0.13.2/Rakefile

@@ -0,0 +1,55 @@
+# frozen_string_literal: true
+
+require "bundler"
+Bundler::GemHelper.install_tasks
+
+# See https://github.com/simplecov-ruby/simplecov/issues/171
+desc "Set permissions on all files so they are compatible with both user-local and system-wide installs"
+task :fix_permissions do
+  system 'bash -c "find . -type f -exec chmod 644 {} \; && find . -type d -exec chmod 755 {} \;"'
+end
+# Enforce proper permissions on each build
+Rake::Task[:build].prerequisites.unshift :fix_permissions
+
+require "rake/testtask"
+Rake::TestTask.new(:test) do |test|
+  test.libs << "lib" << "test"
+  test.pattern = "test/**/test_*.rb"
+  test.verbose = true
+end
+
+begin
+  require "rubocop/rake_task"
+  RuboCop::RakeTask.new
+rescue LoadError
+  task :rubocop do
+    warn "Rubocop is disabled"
+  end
+end
+
+task default: [:test, :rubocop]
+
+namespace :assets do
+  desc "Compiles all assets"
+  task :compile do
+    puts "Compiling assets"
+    require "sprockets"
+    require "sprockets/sass_processor"
+
+    Sprockets.register_processor("text/css") do |input|
+      {data: input[:data].gsub(/(?<!-|_)url\(['"]?(.+?)['"]?\)/) { "asset-data-url(\"#{Regexp.last_match(1)}\")" }}
+    end
+
+    Sprockets.register_processor "text/css", Sprockets::ScssProcessor
+
+    assets = Sprockets::Environment.new do |env|
+      env.append_path "assets/javascripts"
+      env.append_path "assets/stylesheets"
+      env.append_path "public"
+      env.js_compressor = :uglify
+      env.css_compressor = :scss
+    end
+    assets["application.js"].write_to("public/application.js")
+    assets["application.css"].write_to("public/application.css")
+  end
+end