oxidized 0.21.0 → 0.22.0

data/lib/oxidized/model/gcombnps.rb

@@ -0,0 +1,82 @@
+class GcomBNPS < Oxidized::Model
+  # For switches from GCOM Technologies Co.,Ltd. running the "Broadband Network Platform Software"
+  # Author: Frederik Kriewitz <frederik@kriewitz.eu>
+  #
+  # tested with:
+  #  - S5330 (aka Fiberstore S3800)
+
+  prompt /^\r?([\w.@()-]+?(\(1-16 chars\))?[#>:]\s?)$/ # also match SSH password promt (post_login commands are sent after the first prompt)
+  comment '! '
+
+  # alternative to handle the SSH login, but this breaks telnet
+  #  expect /^Password\(1-16 chars\):/ do |data|
+  #      send @node.auth[:password] + "\n"
+  #      ''
+  #  end
+
+  # handle pager (can't be disabled?)
+  expect /^\.\.\.\.press ENTER to next line, CTRL_C to quit, other key to next page\.\.\.\.$/ do |data, re|
+    send ' '
+    data.sub re, ''
+  end
+
+  cmd :all do |cfg|
+    cfg = cfg.gsub " \e[73D\e[K", '' # remove garbage remaining from the pager
+    cfg.each_line.to_a[1..-2].join
+  end
+
+  cmd :secret do |cfg|
+    cfg.gsub! /^(snmp-server community)\s+[^\s]+\s+(.*)/, '\\1 <community hidden> \\2'
+    cfg
+  end
+
+  cmd 'show running-config' do |cfg|
+    cfg
+  end
+
+  cmd 'show interface sfp' do |cfg|
+    out = []
+    cfg.each_line do |line|
+      next if line.match /^  Temperature/
+      next if line.match /^  Voltage\(V\)/
+      next if line.match /^  Bias Current\(mA\)/
+      next if line.match /^  RX Power\(dBM\)/
+      next if line.match /^  TX Power\(dBM\)/
+      out << line
+    end
+
+    comment out.join
+  end
+
+  cmd 'show version' do |cfg|
+    comment cfg
+  end
+
+  cmd 'show system' do |cfg|
+    out = []
+    cfg.each_line do |line|
+      next if line.match /^system run time        :/
+      next if line.match /^switch temperature     :/
+      out << line
+    end
+
+    comment out.join
+  end
+
+  cfg :telnet do
+    username /^Username\(1-32 chars\):/
+    password /^Password\(1-16 chars\):/
+  end
+
+  cfg :ssh do
+    # the switch blindy accepts the SSH connection without password validation and then spawns a telnet login prompt
+    # first thing we've to send is the password
+    post_login do
+      send @node.auth[:password] + "\n"
+    end
+  end
+
+  cfg :telnet, :ssh do
+    pre_logout 'exit'
+  end
+end

data/lib/oxidized/model/hatteras.rb

@@ -9,7 +9,6 @@ class Hatteras < Oxidized::Model
     data.sub re, ''
   end
 
-
   cmd :secret do |cfg|
     cfg.gsub! /^(community) \S+/, '\\1 "<configuration removed>"'
     cfg.gsub! /^(communityString) "\S+"/, '\\1 "<configuration removed>"'
@@ -22,14 +21,18 @@ class Hatteras < Oxidized::Model
   end
 
   cmd "show switch\r" do |cfg|
-    cfg = cfg.each_line.reject { |line| line.match /Switch uptime|Switch temperature|Last reset reason/ or
-                                          line.match /TermCpuUtil|^\s+\^$|ERROR: Bad command/ }.join
+    cfg = cfg.each_line.reject { |line|
+      line.match /Switch uptime|Switch temperature|Last reset reason/ or
+        line.match /TermCpuUtil|^\s+\^$|ERROR: Bad command/
+    } .join
     comment cfg
   end
 
   cmd "show card\r" do |cfg|
-    cfg = cfg.each_line.reject { |line| line.match /Card uptime|Card temperature|Last reset reason/ or
-                                          line.match /TermCpuUtil|^\s+\^$|ERROR: Bad command/ }.join
+    cfg = cfg.each_line.reject { |line|
+      line.match /Card uptime|Card temperature|Last reset reason/ or
+        line.match /TermCpuUtil|^\s+\^$|ERROR: Bad command/
+    } .join
     comment cfg
   end
 

data/lib/oxidized/model/hirschmann.rb

@@ -1,10 +1,9 @@
 class Hirschmann < Oxidized::Model
+  prompt /^[\(\w\s\w\)]+\s[>|#]+?$/
 
-  prompt /^[\(\w\s\w\)]+\s[>|#]+?$/ 
- 
   comment '## '
- 
-  #Handle pager
+
+  # Handle pager
   expect /^--More--.*$/ do |data, re|
     send 'a'
     data.sub re, ''
@@ -22,11 +21,11 @@ class Hirschmann < Oxidized::Model
     cfg.gsub! /^Average CPU Utilization.*\n/, ""
     comment cfg
   end
- 
+
   cmd 'show running-config' do |cfg|
-    cfg.gsub! /^users.*\n/, "" 
+    cfg.gsub! /^users.*\n/, ""
     cfg
-  end    
+  end
 
   cfg :telnet do
     username /^User:/
@@ -34,8 +33,7 @@ class Hirschmann < Oxidized::Model
   end
 
   cfg :telnet, :ssh do
-   post_login 'enable'
-   pre_logout 'logout'
+    post_login 'enable'
+    pre_logout 'logout'
   end
-
 end

data/lib/oxidized/model/hpebladesystem.rb

@@ -4,13 +4,13 @@ class HPEBladeSystem < Oxidized::Model
   prompt /.*> /
   comment '# '
 
-  expect /^\s*--More--\s+.*$/ do |data, re|
-     send ' '
-     data.sub re, ''
-  end
+  # expect /^\s*--More--\s+.*$/ do |data, re|
+  #   send ' '
+  #   data.sub re, ''
+  # end
 
   cmd :all do |cfg|
-    cfg = cfg.delete("\r").each_line.to_a[0..-1].map{|line|line.rstrip}.join("\n") + "\n"
+    cfg = cfg.delete("\r").each_line.to_a[0..-1].map { |line| line.rstrip }.join("\n") + "\n"
     cfg.each_line.to_a[0..-2].join
   end
 
@@ -22,7 +22,7 @@ class HPEBladeSystem < Oxidized::Model
   cmd 'show oa info' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show oa network' do |cfg|
     comment cfg
   end
@@ -30,16 +30,17 @@ class HPEBladeSystem < Oxidized::Model
   cmd 'show oa certificate' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show sshfingerprint' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show fru' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show network' do |cfg|
+    cfg.gsub! /Last Update:.*$/i, ''
     comment cfg
   end
 
@@ -54,15 +55,15 @@ class HPEBladeSystem < Oxidized::Model
   cmd 'show server list' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show server names' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show server port map all' do |cfg|
     comment cfg
   end
-  
+
   cmd 'show server info all' do |cfg|
     comment cfg
   end
@@ -71,13 +72,14 @@ class HPEBladeSystem < Oxidized::Model
     cfg.gsub! /^#(Generated on:) .*$/, '\\1 <removed>'
     cfg.gsub /^\s+/, ''
   end
-  
+
   cfg :telnet do
     username /\slogin:/
     password /^Password: /
   end
- 
-   cfg :telnet, :ssh do
-     pre_logout "exit"
-   end
+
+  cfg :telnet, :ssh do
+    post_login "set script mode on"
+    pre_logout "exit"
+  end
 end

data/lib/oxidized/model/hpemsa.rb

@@ -1,5 +1,4 @@
 class HpeMsa < Oxidized::Model
-
   prompt /^#\s?$/
 
   cmd 'show configuration'
@@ -8,6 +7,4 @@ class HpeMsa < Oxidized::Model
     post_login 'set cli-parameters pager disabled'
     pre_logout 'exit'
   end
-
 end
-

data/lib/oxidized/model/ios.rb

@@ -1,24 +1,23 @@
 class IOS < Oxidized::Model
-
   prompt /^([\w.@()-]+[#>]\s?)$/
   comment  '! '
 
   # example how to handle pager
-  #expect /^\s--More--\s+.*$/ do |data, re|
+  # expect /^\s--More--\s+.*$/ do |data, re|
   #  send ' '
   #  data.sub re, ''
-  #end
+  # end
 
   # non-preferred way to handle additional PW prompt
-  #expect /^[\w.]+>$/ do |data|
+  # expect /^[\w.]+>$/ do |data|
   #  send "enable\n"
   #  send vars(:enable) + "\n"
   #  data
-  #end
+  # end
 
   cmd :all do |cfg|
-    #cfg.gsub! /\cH+\s{8}/, ''         # example how to handle pager
-    #cfg.gsub! /\cH+/, ''              # example how to handle pager
+    # cfg.gsub! /\cH+\s{8}/, ''         # example how to handle pager
+    # cfg.gsub! /\cH+/, ''              # example how to handle pager
     # get rid of errors for commands that don't work on some devices
     cfg.gsub! /^% Invalid input detected at '\^' marker\.$|^\s+\^$/, ''
     cfg.each_line.to_a[1..-2].join
@@ -26,6 +25,7 @@ class IOS < Oxidized::Model
 
   cmd :secret do |cfg|
     cfg.gsub! /^(snmp-server community).*/, '\\1 <configuration removed>'
+    cfg.gsub! /^(snmp-server host \S+( vrf \S+)?( version (1|2c|3))?)\s+\S+((\s+\S*)*)\s*/, '\\1 <secret hidden> \\5'
     cfg.gsub! /^(username \S+ privilege \d+) (\S+).*/, '\\1 <secret hidden>'
     cfg.gsub! /^(username \S+ password \d) (\S+)/, '\\1 <secret hidden>'
     cfg.gsub! /^(username \S+ secret \d) (\S+)/, '\\1 <secret hidden>'
@@ -42,64 +42,64 @@ class IOS < Oxidized::Model
     comments = []
     comments << cfg.lines.first
     lines = cfg.lines
-    lines.each_with_index do |line,i|
-        slave = ''
-        slaveslot = ''
+    lines.each_with_index do |line, i|
+      slave = ''
+      slaveslot = ''
 
-        if line.match /^Slave in slot (\d+) is running/
-            slave = " Slave:";
-            slaveslot = ", slot #{$1}";
-        end
+      if line.match /^Slave in slot (\d+) is running/
+        slave = " Slave:";
+        slaveslot = ", slot #{$1}";
+      end
 
-        if line.match /^Compiled (.*)$/
-            comments << "Image:#{slave} Compiled: #{$1}"
-        end
+      if line.match /^Compiled (.*)$/
+        comments << "Image:#{slave} Compiled: #{$1}"
+      end
 
-        if line.match /^(?:Cisco )?IOS .* Software,? \(([A-Za-z0-9_-]*)\), .*Version\s+(.*)$/
-            comments << "Image:#{slave} Software: #{$1}, #{$2}"
-        end
+      if line.match /^(?:Cisco )?IOS .* Software,? \(([A-Za-z0-9_-]*)\), .*Version\s+(.*)$/
+        comments << "Image:#{slave} Software: #{$1}, #{$2}"
+      end
 
-        if line.match /^ROM: (IOS \S+ )?(System )?Bootstrap.*(Version.*)$/
-            comments << "ROM Bootstrap: #{$3}"
-        end
+      if line.match /^ROM: (IOS \S+ )?(System )?Bootstrap.*(Version.*)$/
+        comments << "ROM Bootstrap: #{$3}"
+      end
 
-        if line.match /^BOOTFLASH: .*(Version.*)$/
-            comments << "BOOTFLASH: #{$1}"
-        end
+      if line.match /^BOOTFLASH: .*(Version.*)$/
+        comments << "BOOTFLASH: #{$1}"
+      end
 
-        if line.match /^(\d+[kK]) bytes of (non-volatile|NVRAM)/
-            comments << "Memory: nvram #{$1}"
-        end
+      if line.match /^(\d+[kK]) bytes of (non-volatile|NVRAM)/
+        comments << "Memory: nvram #{$1}"
+      end
 
-        if line.match /^(\d+[kK]) bytes of (flash memory|flash internal|processor board System flash|ATA CompactFlash)/i
-            comments << "Memory: flash #{$1}"
-        end
+      if line.match /^(\d+[kK]) bytes of (flash memory|flash internal|processor board System flash|ATA CompactFlash)/i
+        comments << "Memory: flash #{$1}"
+      end
 
-        if line.match (/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i)
-            comments << "Memory: pcmcia #{$2} #{$3}#{$4} #{$1}";
-        end
+      if line.match (/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i)
+        comments << "Memory: pcmcia #{$2} #{$3}#{$4} #{$1}";
+      end
 
-        if line.match /(\S+(?:\sseries)?)\s+(?:\((\S+)\)\s+processor|\(revision[^)]+\)).*\s+with (\S+k) bytes/i
-            sproc = $1
-            cpu = $2
-            mem = $3
-            cpuxtra = ''
-            comments << "Chassis type:#{slave} #{sproc}";
-            comments << "Memory:#{slave} main #{mem}";
-            # check the next two lines for more CPU info
-            if cfg.lines[i+1].match /processor board id (\S+)/i
-                comments << "Processor ID: #{$1}";
-            end
-            if cfg.lines[i+2].match /(cpu at |processor: |#{cpu} processor,)/i
-                # change implementation to impl and prepend comma
-                cpuxtra = cfg.lines[i+2].gsub(/implementation/,'impl').gsub(/^/,', ').chomp;
-            end
-            comments << "CPU:#{slave} #{cpu}#{cpuxtra}#{slaveslot}";
+      if line.match /(\S+(?:\sseries)?)\s+(?:\((\S+)\)\s+processor|\(revision[^)]+\)).*\s+with (\S+k) bytes/i
+        sproc = $1
+        cpu = $2
+        mem = $3
+        cpuxtra = ''
+        comments << "Chassis type:#{slave} #{sproc}";
+        comments << "Memory:#{slave} main #{mem}";
+        # check the next two lines for more CPU info
+        if cfg.lines[i + 1].match /processor board id (\S+)/i
+          comments << "Processor ID: #{$1}";
         end
-
-        if line.match /^System image file is "([^\"]*)"$/
-            comments << "Image: #{$1}"
+        if cfg.lines[i + 2].match /(cpu at |processor: |#{cpu} processor,)/i
+          # change implementation to impl and prepend comma
+          cpuxtra = cfg.lines[i + 2].gsub(/implementation/, 'impl').gsub(/^/, ', ').chomp;
         end
+        comments << "CPU:#{slave} #{cpu}#{cpuxtra}#{slaveslot}";
+      end
+
+      if line.match /^System image file is "([^\"]*)"$/
+        comments << "Image: #{$1}"
+      end
     end
     comments << "\n"
     comment comments.join "\n"
@@ -142,5 +142,4 @@ class IOS < Oxidized::Model
     post_login 'terminal width 0'
     pre_logout 'exit'
   end
-
 end

data/lib/oxidized/model/iosxe.rb

@@ -0,0 +1,5 @@
+# IOS parser should work here
+
+require_relative 'ios.rb'
+
+IOSXE = IOS

data/lib/oxidized/model/iosxr.rb

@@ -1,5 +1,4 @@
 class IOSXR < Oxidized::Model
-
   # IOS XR model #
 
   prompt /^(\r?[\w.@:\/-]+[#>]\s?)$/
@@ -9,7 +8,7 @@ class IOSXR < Oxidized::Model
     cfg.each_line.to_a[2..-2].join
   end
 
-  cmd :secret do |cfg| 
+  cmd :secret do |cfg|
     cfg.gsub! /^(snmp-server community).*/, '\\1 <configuration removed>'
     cfg.gsub! /secret (\d+) (\S+).*/, '<secret hidden>'
     cfg
@@ -45,5 +44,4 @@ class IOSXR < Oxidized::Model
     end
     pre_logout 'exit'
   end
-
 end

data/lib/oxidized/model/ipos.rb

@@ -1,5 +1,4 @@
 class IPOS < Oxidized::Model
-
   # Ericsson SSR (IPOS)
   # Redback SE (SEOS)
 
@@ -54,7 +53,7 @@ class IPOS < Oxidized::Model
     post_login 'terminal length 0'
     if vars :enable
       post_login do
-        cmd "enable" 
+        cmd "enable"
         cmd vars(:enable)
       end
     end
@@ -63,5 +62,4 @@ class IPOS < Oxidized::Model
       send "n\n"
     end
   end
-
 end