oxen_account 0.1.0

data/config/initializers/devise.rb

@@ -0,0 +1,303 @@
+require 'devise'
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  # config.secret_key = '9443b88a35d00851d85f3d87bd8ba61298bf0ccb57b1971589140626f5a9da4351e8214811da0002f212e3bc107650e06c5097e63da74e6ffa092bc4a54a3f2e'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = 'no-reply@' + Rails.application.secrets.domain_name
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If 401 status code should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # encryptor), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = '0070067faf6611d9d72133ff9b9a50d9142b12bdb0d4620f69e4bc68f9ec44384727587d593285397bd083e97da1e830c9e464e33ec811e7e3a77c111780b1e5'
+
+  # ==> Configuration for :invitable
+  # The period the generated invitation token is valid, after
+  # this period, the invited resource won't be able to accept the invitation.
+  # When invite_for is 0 (the default), the invitation won't expire.
+  # config.invite_for = 2.weeks
+
+  # Number of invitations users can send.
+  # - If invitation_limit is nil, there is no limit for invitations, users can
+  # send unlimited invitations, invitation_limit column is not used.
+  # - If invitation_limit is 0, users can't send invitations by default.
+  # - If invitation_limit n > 0, users can send n invitations.
+  # You can change invitation_limit column for some users so they can send more
+  # or less invitations, even with global invitation_limit = 0
+  # Default: nil
+  # config.invitation_limit = 5
+
+  # The key to be used to check existing users when sending an invitation
+  # and the regexp used to test it when validate_on_invite is not set.
+  # config.invite_key = {:email => /\A[^@]+@[^@]+\z/}
+  # config.invite_key = {:email => /\A[^@]+@[^@]+\z/, :username => nil}
+
+  # Flag that force a record to be valid before being actually invited
+  # Default: false
+  # config.validate_on_invite = true
+
+  # Resend invitation if user with invited status is invited again
+  # Default: true
+  # config.resend_invitation = false
+
+  # The class name of the inviting model. If this is nil,
+  # the #invited_by association is declared to be polymorphic.
+  # Default: nil
+  # config.invited_by_class_name = 'User'
+
+  # The column name used for counter_cache column. If this is nil,
+  # the #invited_by association is declared without counter_cache.
+  # Default: nil
+  # config.invited_by_counter_cache = :invitations_count
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # Invalidates all the remember me tokens when the user signs out.
+  config.expire_all_remember_me_on_sign_out = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 8..128
+
+  #
+  # zxcvbnable provides strength
+  config.min_password_score = 0
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = true
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+end

data/config/initializers/devise_permitted_parameters.rb

@@ -0,0 +1,17 @@
+# module DevisePermittedParameters
+#   extend ActiveSupport::Concern
+#
+#   included do
+#     before_filter :configure_permitted_parameters
+#   end
+#
+#   protected
+#
+#   def configure_permitted_parameters
+#     devise_parameter_sanitizer.for(:sign_up) << :name
+#     devise_parameter_sanitizer.for(:account_update) << :name
+#   end
+#
+# end
+#
+# DeviseController.send :include, DevisePermittedParameters

data/config/locales/devise.da.yml

@@ -0,0 +1,58 @@
+da:
+  devise:
+    confirmations:
+      confirmed: "Din konto er blevet bekræftet."
+      send_instructions: "Om få minutter vil du modtage en email med instruktioner om aktivering af din konto."
+      send_paranoid_instructions: "Hvis din e-mail adresse findes i vores database vil du modtage en e-mail med instruktioner om hvordan du kan aktivere din konto."
+    failure:
+      already_authenticated: "Du er allerede logget ind."
+      inactive: "Din konto er ikke bekræftet."
+      invalid: "Email eller password er ikke gyldig."
+      locked: "Din konto er låst."
+      last_attempt: "Du har et mere forsøg inden din konto vil blive låst."
+      not_found_in_database: "Email eller password er ikke gyldig."
+      timeout: "Din session er udløbet. Log ind igen for at kunne fortsætte."
+      unauthenticated: "Du skal logge ind for at kunne fortsætte."
+      unconfirmed: "Du skal bekræfte din konto for at kunne fortsætte."
+    mailer:
+      confirmation_instructions:
+        subject: "Bekræft din konto"
+      reset_password_instructions:
+        subject: "Nulstilling af password"
+      unlock_instructions:
+        subject: "Genåbning af konto"
+    omniauth_callbacks:
+      failure: "Du kunne ikke logges ind med din %{kind} konto: \"%{reason}\"."
+      success: "Du er nu logget ind med din %{kind} konto."
+    passwords:
+      no_token: "Du har kun adgang til denne side via link fra en email ang. nulstilling af password. Hvis du kommer fra denne email skal du sikre dig at du bruge hele URL'en."
+      send_instructions: "Du vil om et øjeblik modtage en email vedrørende nulstilling af password."
+      send_paranoid_instructions: "Hvis din e-mail adresse findes i vores database vil du modtage et link til hvor du kan nulstille dit password."
+      updated: "Dit password er ændret og du er nu logget ind."
+      updated_not_active: "Dit password er ændret."
+    registrations:
+      destroyed: "Farvel. Din konto er nu lukket."
+      signed_up: "Din registrering er godkendt."
+      signed_up_but_inactive: "Din registrering er godkendt, men vi kunne ikke logge dig ind, da din konto endnu ikke er blevet aktiveret."
+      signed_up_but_locked: "Din registrering er godkendt, men vi kunne ikke logge dig ind, da din konto er låst."
+      signed_up_but_unconfirmed: "En besked med bekræftelses link er blevet sendt til din email adresse. Åbn venligst linket for at aktivere din konto."
+      update_needs_confirmation: "Din konto er blevet opdateret, men vi er nødt til at bekræfte din nye email. Check venligst din mail og klik på bekræftelses linket for at bekræfte din nye email."
+      updated: "Din konto er opdateret."
+    sessions:
+      signed_in: "Du er nu logget ind."
+      signed_out: "Du er nu logget ud."
+    unlocks:
+      send_instructions: 'Om få minutter vil du modtage en email med instruktioner om genåbning af din konto.'
+      send_paranoid_instructions: 'Hvis din e-mail adresse findes i vores database vil du modtage in e-mail med instutioner om hvordan du kan låse din konto op.'
+      unlocked: 'Din konto er genåbnet og du er nu logget ind.'
+  errors:
+    messages:
+      weak_password: "er ikke stærk nok! Overvej at tilføje et ciffer, et symbol - eller flere bogstaver for at hærde det!"
+      already_confirmed: "er allerede bekræftet"
+      confirmation_period_expired: "skal bekræftes inden %{period}, anmod venligst om en ny"
+      expired: "er udløbet. Vær venlig at bede om en ny"
+      not_found: "ikke fundet"
+      not_locked: "var ikke låst"
+      not_saved:
+        one: "1 fejl medførte at denne %{resource} ikke kunne gemmes:"
+        other: "%{count} fejl medførte at denne %{resource} ikke kunne gemmes:"

data/config/locales/devise.en.yml

@@ -0,0 +1,61 @@
+# Additional translations at https://github.com/plataformatec/devise/wiki/I18n
+
+en:
+  devise:
+    confirmations:
+      confirmed: "Your email address has been successfully confirmed."
+      send_instructions: "You will receive an email with instructions for how to confirm your email address in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive an email with instructions for how to confirm your email address in a few minutes."
+    failure:
+      already_authenticated: "You are already signed in."
+      inactive: "Your account is not activated yet."
+      invalid: "Invalid %{authentication_keys} or password."
+      locked: "Your account is locked."
+      last_attempt: "You have one more attempt before your account is locked."
+      not_found_in_database: "Invalid %{authentication_keys} or password."
+      timeout: "Your session expired. Please sign in again to continue."
+      unauthenticated: "You need to sign in or sign up before continuing."
+      unconfirmed: "You have to confirm your email address before continuing."
+    mailer:
+      confirmation_instructions:
+        subject: "Confirmation instructions"
+      reset_password_instructions:
+        subject: "Reset password instructions"
+      unlock_instructions:
+        subject: "Unlock instructions"
+    omniauth_callbacks:
+      failure: "Could not authenticate you from %{kind} because \"%{reason}\"."
+      success: "Successfully authenticated from %{kind} account."
+    passwords:
+      no_token: "You can't access this page without coming from a password reset email. If you do come from a password reset email, please make sure you used the full URL provided."
+      send_instructions: "You will receive an email with instructions on how to reset your password in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive a password recovery link at your email address in a few minutes."
+      updated: "Your password has been changed successfully. You are now signed in."
+      updated_not_active: "Your password has been changed successfully."
+    registrations:
+      destroyed: "Bye! Your account has been successfully cancelled. We hope to see you again soon."
+      signed_up: "Welcome! You have signed up successfully."
+      signed_up_but_inactive: "You have signed up successfully. However, we could not sign you in because your account is not yet activated."
+      signed_up_but_locked: "You have signed up successfully. However, we could not sign you in because your account is locked."
+      signed_up_but_unconfirmed: "A message with a confirmation link has been sent to your email address. Please follow the link to activate your account."
+      update_needs_confirmation: "You updated your account successfully, but we need to verify your new email address. Please check your email and follow the confirm link to confirm your new email address."
+      updated: "Your account has been updated successfully."
+    sessions:
+      signed_in: "Signed in successfully."
+      signed_out: "Signed out successfully."
+      already_signed_out: "Signed out successfully."
+    unlocks:
+      send_instructions: "You will receive an email with instructions for how to unlock your account in a few minutes."
+      send_paranoid_instructions: "If your account exists, you will receive an email with instructions for how to unlock it in a few minutes."
+      unlocked: "Your account has been unlocked successfully. Please sign in to continue."
+  errors:
+    messages:
+      weak_password: "is not strong enough. Consider adding a number, symbols or more letters to make it stronger."
+      already_confirmed: "was already confirmed, please try signing in"
+      confirmation_period_expired: "needs to be confirmed within %{period}, please request a new one"
+      expired: "has expired, please request a new one"
+      not_found: "not found"
+      not_locked: "was not locked"
+      not_saved:
+        one: "1 error prohibited this %{resource} from being saved:"
+        other: "%{count} errors prohibited this %{resource} from being saved:"

data/config/locales/devise_invitable.da.yml

@@ -0,0 +1,26 @@
+da:
+  devise:
+    failure:
+      invited: "Du mangler at acceptere din invitation! Se den i din indbakke"
+      missing_data: "Du skal udfylde navn og email med korrekte oplysninger!"
+    invitations:
+      send_instructions: "En email med en invitation til at logge på er blevet sendt til %{email}."
+      invitation_token_invalid: "Du har anvendt en invitation som ikke er gyldig!"
+      updated: "Din adgangskode blev gemt korrekt! Du er nu logget ind!"
+      no_invitations_remaining: "No invitations remaining"
+      invitation_removed: "Your invitation was removed."
+      new:
+        header: "Send invitation"
+        submit_button: "Send an invitation"
+      edit:
+        title: "Invitation"
+        header: "Herligt at du tog imod invitationen!"
+        instructions: 'Nu mangler du bare at vælge en adgangskode for at du er igang!'
+        submit_button: "Gem"
+    mailer:
+      invitation_instructions:
+        subject: "Invitation instructions"
+        hello: "Hello %{email}"
+        someone_invited_you: "Someone has invited you to %{url}, you can accept it through the link below."
+        accept: "Accept invitation"
+        ignore: "If you don't want to accept the invitation, please ignore this email.<br />Your account won't be created until you access the link above and set your password."

data/config/locales/devise_invitable.en.yml

@@ -0,0 +1,23 @@
+en:
+  devise:
+    failure:
+      invited: "You have a pending invitation, accept it to finish creating your account."
+    invitations:
+      send_instructions: "An invitation email has been sent to %{email}."
+      invitation_token_invalid: "The invitation token provided is not valid!"
+      updated: "Your password was set successfully. You are now signed in."
+      no_invitations_remaining: "No invitations remaining"
+      invitation_removed: "Your invitation was removed."
+      new:
+        header: "Send invitation"
+        submit_button: "Send an invitation"
+      edit:
+        header: "Set your password"
+        submit_button: "Set my password"
+    mailer:
+      invitation_instructions:
+        subject: "Invitation instructions"
+        hello: "Hello %{email}"
+        someone_invited_you: "Someone has invited you to %{url}, you can accept it through the link below."
+        accept: "Accept invitation"
+        ignore: "If you don't want to accept the invitation, please ignore this email.<br />Your account won't be created until you access the link above and set your password."

data/config/routes.rb

@@ -0,0 +1,8 @@
+Rails.application.routes.draw do
+
+  devise_for :users, :controllers => { :invitations => 'users/invitations' }
+  scope '/admin' do
+    resources :accounts
+    resources :users
+  end
+end

data/lib/generators/oxen_account/account_generator.rb

@@ -0,0 +1,26 @@
+require 'rails/generators'
+require 'rails/generators/migration'
+
+module OxenAccount
+  module Generators
+    class AccountGenerator < Rails::Generators::Base
+      include Rails::Generators::Migration
+      def self.source_root
+        @source_root ||= File.join(File.dirname(__FILE__), 'templates')
+      end
+
+      def self.next_migration_number(dirname)
+        if ActiveRecord::Base.timestamped_migrations
+          Time.new.utc.strftime("%Y%m%d%H%M%S")
+        else
+          "%.3d" % (current_migration_number(dirname) + 1)
+        end
+      end
+
+      def create_migration_file
+        migration_template 'account.rb', 'db/migrate/create_accounts.rb'
+        migration_template 'user_permission.rb', 'db/migrate/create_user_permissions.rb'
+      end
+    end
+  end
+end

data/lib/generators/oxen_account/templates/account.rb

@@ -0,0 +1,10 @@
+class CreateAccounts < ActiveRecord::Migration
+  def change
+    create_table :accounts do |t|
+      t.string :name
+      t.boolean :active
+
+      t.timestamps null: false
+    end
+  end
+end

data/lib/generators/oxen_account/templates/user_permission.rb

@@ -0,0 +1,14 @@
+class CreateUserPermissions < ActiveRecord::Migration
+  def change
+    create_table :user_permissions do |t|
+      t.references :account, index: true
+      t.references :user, index: true
+      t.string :email
+      t.string :permissions
+
+      t.timestamps null: false
+    end
+    add_foreign_key :user_permissions, :accounts
+    add_foreign_key :user_permissions, :users
+  end
+end

data/lib/oxen_account/engine.rb

@@ -0,0 +1,17 @@
+module OxenAccount
+  class Engine < ::Rails::Engine
+    config.generators do |g|
+      g.test_framework :rspec,
+        :fixture => false,
+        :fixtures => true,
+        :view_specs => false,
+        :helper_specs => false,
+        :routing_specs => false,
+        :controller_specs => true,
+        :request_specs => true
+      g.fixture_replacement :factory_girl, :dir => "spec/factories"
+      g.assets false
+      g.helper false
+    end
+  end
+end

data/lib/oxen_account/version.rb

@@ -0,0 +1,3 @@
+module OxenAccount
+  VERSION = "0.1.0"
+end

data/lib/oxen_account.rb

@@ -0,0 +1,7 @@
+require "oxen_account/version"
+require "oxen_account/engine"
+
+module OxenAccount
+  # Your code goes here...
+  
+end

data/oxen_account.gemspec

@@ -0,0 +1,55 @@
+# coding: utf-8
+lib = File.expand_path('../lib', __FILE__)
+$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
+require 'oxen_account/version'
+
+Gem::Specification.new do |spec|
+  spec.name          = "oxen_account"
+  spec.version       = OxenAccount::VERSION
+  spec.authors       = ["Walther H Diechmann"]
+  spec.email         = ["walther@diechmann.net"]
+
+  # if spec.respond_to?(:metadata)
+  #   spec.metadata['allowed_push_host'] = "TODO: Set to 'http://mygemserver.com' to prevent pushes to rubygems.org, or delete to allow pushes to any server."
+  # end
+
+  spec.summary       = %q{Offers an account table for customer accounts}
+  spec.description   = %q{The account table is strictly for managing customer accounts}
+  spec.homepage      = "http://gitserver.alco.dk/oxen_account"
+  spec.license       = "MIT"
+
+  spec.files         = `git ls-files -z`.split("\x0").reject { |f| f.match(%r{^(test|spec|features)/}) }
+  spec.bindir        = "exe"
+  spec.executables   = spec.files.grep(%r{^exe/}) { |f| File.basename(f) }
+  spec.require_paths = ["lib"]
+
+  spec.add_runtime_dependency 'devise'
+  spec.add_runtime_dependency 'devise_invitable'
+  spec.add_runtime_dependency 'devise_zxcvbn'
+
+  spec.add_runtime_dependency "paper_trail"
+  spec.add_runtime_dependency 'pundit'
+
+  spec.add_development_dependency "bundler", "~> 1.8"
+  spec.add_development_dependency "rake", "~> 10.0"
+
+  spec.add_development_dependency 'combustion', '~> 0.5.3'
+  spec.add_development_dependency "sqlite3"
+  # spec.add_development_dependency "railties", ">= 3.2.6", "< 5"
+  # spec.add_development_dependency "activerecord", ">= 3.2.6"
+  # spec.add_development_dependency "bundler", "~> 1.7"
+  # spec.add_development_dependency "rake", "~> 10.0"
+  spec.add_development_dependency 'factory_girl_rails'
+  spec.add_development_dependency 'database_cleaner'
+  spec.add_development_dependency 'capybara'
+  #
+  spec.add_development_dependency "rspec"
+  spec.add_development_dependency 'rspec-rails'
+  spec.add_development_dependency "rspec-nc"
+  spec.add_development_dependency "guard"
+  spec.add_development_dependency "guard-rspec"
+  spec.add_development_dependency "pry"
+  spec.add_development_dependency "pry-remote"
+  spec.add_development_dependency "pry-nav"
+
+end