osc_machete_rails 2.0.0.pre1 → 2.1.2

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: 532dd20ce410fdf6ef08f67364f2bc0f3f5ffd68
-  data.tar.gz: 0b2e520c82c4f185e8b70c0a1725b5becf656f64
+SHA256:
+  metadata.gz: 3ee5deebd0d854fd458398b0563b1ceec7c7919510b93ea1055d848a20c4cc69
+  data.tar.gz: c4b8df8a5b61d2fccb502a3a542eaed3a50d3c399707c64a57707c21d6f39f3e
 SHA512:
-  metadata.gz: 450668a0aebdd9c4691cb29ee7ddd62a337b980db69bc6ed0d40432a74bde44c4976ee4572d7c299b5289591f9dd778d13076f13aac32ff61fd9e6bbe78c0259
-  data.tar.gz: 6e7fe6f48805ac128673610b3bc2eb36d1951087e87069d69c255bbe607d996d5854e40a23de4d396f9c18bfb940de3a2bfec041295f0de0621ab770dd5bc019
+  metadata.gz: 90c47c953400fea057a3a3a8cc1654da277241999e19f4c78b02c6da5b0e58bccbf0d4c44929ed89e937a3aac9620058f667ccb0b613e624e49305d37a8e2c3f
+  data.tar.gz: a5e5011f6dcb90e737e87adfd14d7eea6fc287aebdc185b770491e99a870715dd000356496c5fd4aa18d44397b85f597510c865ee73cedee8eb13eb04eb614ca

data/CHANGELOG.md

@@ -4,10 +4,43 @@ All notable changes to this project will be documented in this file.
 This project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [Unreleased]
+## [1.3.1] - 2020-04-02
+### Fixed
+
+- Fixed [#71](https://github.com/OSC/osc_machete_rails/pull/71).
+
+## [1.3.0] - 2020-01-21
+
+### Changed
+
+- dependency on rails has been increased from 4.2 to > 5.
+  -  this changed a lot in the test cases, nothing in the actual library.
+
+## [1.2.2] - 2016-07-26
+
+### Changed
+
+- dependency from osc-machete 1.1 to 1.2 which ups the pbs dependency to 2.0
+
+### Fixed
+
+- use latest version of osc-machete gem so `Job#host` exists so after submitting a
+  job we save the host to the database
+
+## [1.2.1] - 2016-07-26
+
+### Fixed
+
+- bug where `results_valid?` might not call results validation method
+
+## [1.2.0] - 2016-06-07
 
 ### Changed
 
 - remove `AwesimRails` as a dependency
+- README and spec changes for rubygems release
+- `Workflow#staging_target_dir` now accepts `dataroot` path keyword argument
+- change Rails dependency to allow any minor version of Rails 4
 
 ## [1.1.0] - 2016-03-03
 
@@ -70,7 +103,12 @@ statusable.rb (from v0.6.3 of osc-machete to latest osc_machete_rails)
 ### Removed
 
 
-[Unreleased]: https://github.com/AweSim-OSC/osc_machete_rails/compare/v1.1.0...master
-[1.1.0]: https://github.com/AweSim-OSC/osc_machete_rails/compare/v1.0.1...v1.1.0
-[1.0.1]: https://github.com/AweSim-OSC/osc_machete_rails/compare/v1.0.0...v1.0.1
+[Unreleased]: https://github.com/OSC/osc_machete_rails/compare/v1.3.1...master
+[1.3.1]: https://github.com/OSC/osc_machete_rails/compare/v1.3.0...v1.3.1
+[1.3.0]: https://github.com/OSC/osc_machete_rails/compare/v1.2.2...v1.3.0
+[1.2.2]: https://github.com/OSC/osc_machete_rails/compare/v1.2.1...v1.2.2
+[1.2.1]: https://github.com/OSC/osc_machete_rails/compare/v1.2.0...v1.2.1
+[1.2.0]: https://github.com/OSC/osc_machete_rails/compare/v1.1.0...v1.2.0
+[1.1.0]: https://github.com/OSC/osc_machete_rails/compare/v1.0.1...v1.1.0
+[1.0.1]: https://github.com/OSC/osc_machete_rails/compare/v1.0.0...v1.0.1
 

data/README.md

@@ -12,3 +12,8 @@ And then execute:
 
     $ bundle install
 
+## Usage
+
+### Generators
+
+See [USAGE](lib/generators/osc_machete_rails/USAGE) guidelines for details and examples.

data/lib/osc_machete_rails/statusable.rb

@@ -133,7 +133,7 @@ module OscMacheteRails
     # @return [String] A string representing a validation method name from script_name attr
     # using ActiveSupport methods
     def results_validation_method_name
-      File.basename(script_name, ".*").underscore.parameterize('_') + "_results_valid?"
+      File.basename(script_name, ".*").underscore.parameterize(separator: '_') + "_results_valid?"
     end
 
     # A hook that can be overidden with custom code

data/lib/osc_machete_rails/version.rb

@@ -1,3 +1,3 @@
 module OscMacheteRails
-  VERSION = "2.0.0.pre1"
+  VERSION = "2.1.2"
 end

data/test/dummy/app/assets/config/manifest.js

@@ -0,0 +1,3 @@
+//= link_tree ../images
+//= link_directory ../javascripts .js
+//= link_directory ../stylesheets .css

data/test/dummy/app/controllers/simulations_controller.rb

@@ -55,12 +55,20 @@ class SimulationsController < ApplicationController
   # DELETE /simulations/1.json
   def destroy
     respond_to do |format|
-      if @simulation.destroy
+      # this shouldn't need a rescue, should just be if/else but the rails-controller-testing added
+      # in rails 5 doesn't seem to want to actually rescue exceptions in simulation.destroy and do it's
+      # rails magic, but instead they bubble up into the test case. so we force the rescue here
+      # and add it to simulation.errors.
+      begin
+        @simulation.destroy
         format.html { redirect_to simulations_url, notice: 'Simulation was successfully destroyed.' }
         format.json { head :no_content }
-      else
+
+      rescue PBS::BadhostError => e
+        @simulation.errors.add(:name, :not_implemented, message: e.to_s)
         format.html { render :show, status: 500, alert: 'A problem occurred when trying to destroy the simulation.' }
         format.json { render json: @simulation.errors, status: 500 }
+        next
       end
     end
   end

data/test/dummy/app/models/application_record.rb

@@ -0,0 +1,3 @@
+class ApplicationRecord < ActiveRecord::Base
+  self.abstract_class = true
+end

data/test/dummy/app/models/simulation.rb

@@ -1,4 +1,4 @@
-class Simulation < ActiveRecord::Base
+class Simulation < ApplicationRecord
   has_many :simulation_jobs, dependent: :destroy
   has_machete_workflow_of :simulation_jobs
 
@@ -23,4 +23,5 @@ class Simulation < ActiveRecord::Base
   def copy
     self.dup
   end
+
 end

data/test/dummy/app/models/simulation_job.rb

@@ -1,4 +1,4 @@
-class SimulationJob < ActiveRecord::Base
+class SimulationJob < ApplicationRecord
   # Here we test the deprecated include method instead of the new
   # OscMacheteRails::Statusable
   # We will want both to work...

data/test/dummy/bin/bundle

@@ -1,3 +1,3 @@
 #!/usr/bin/env ruby
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
 load Gem.bin_path('bundler', 'bundle')

data/test/dummy/bin/rails

@@ -1,4 +1,4 @@
 #!/usr/bin/env ruby
-APP_PATH = File.expand_path('../../config/application',  __FILE__)
+APP_PATH = File.expand_path('../config/application', __dir__)
 require_relative '../config/boot'
 require 'rails/commands'

data/test/dummy/bin/setup

@@ -0,0 +1,36 @@
+#!/usr/bin/env ruby
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = File.expand_path('..', __dir__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  # Install JavaScript dependencies if using Yarn
+  # system('bin/yarn')
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?('config/database.yml')
+  #   cp 'config/database.yml.sample', 'config/database.yml'
+  # end
+
+  puts "\n== Preparing database =="
+  system! 'bin/rails db:setup'
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

data/test/dummy/bin/update

@@ -0,0 +1,31 @@
+#!/usr/bin/env ruby
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = File.expand_path('..', __dir__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a way to update your development environment automatically.
+  # Add necessary update steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  # Install JavaScript dependencies if using Yarn
+  # system('bin/yarn')
+
+  puts "\n== Updating database =="
+  system! 'bin/rails db:migrate'
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

data/test/dummy/bin/yarn

@@ -0,0 +1,11 @@
+#!/usr/bin/env ruby
+APP_ROOT = File.expand_path('..', __dir__)
+Dir.chdir(APP_ROOT) do
+  begin
+    exec "yarnpkg", *ARGV
+  rescue Errno::ENOENT
+    $stderr.puts "Yarn executable was not detected in the system."
+    $stderr.puts "Download Yarn at https://yarnpkg.com/en/docs/install"
+    exit 1
+  end
+end

data/test/dummy/config/application.rb

@@ -1,23 +1,22 @@
-require File.expand_path('../boot', __FILE__)
+require_relative 'boot'
 
 require 'rails/all'
 
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
 Bundler.require(*Rails.groups)
-require "osc_machete_rails"
 
 module Dummy
   class Application < Rails::Application
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration should go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded.
+    # Initialize configuration defaults for originally generated Rails version.
+    config.load_defaults 5.2
 
-    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
-    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
-    # config.time_zone = 'Central Time (US & Canada)'
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration can go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded after loading
+    # the framework and any gems in your application.
 
-    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
-    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
-    # config.i18n.default_locale = :de
+    # rails 5 update. tests don't create the belongs_to models
+    config.active_record.belongs_to_required_by_default = false
   end
 end
-

data/test/dummy/config/boot.rb

@@ -1,5 +1,4 @@
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
 
-require 'bundler/setup' if File.exists?(ENV['BUNDLE_GEMFILE'])
-$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)
+require 'bundler/setup' # Set up gems listed in the Gemfile.
+require 'bootsnap/setup' # Speed up boot time by caching expensive operations.

data/test/dummy/config/cable.yml

@@ -0,0 +1,10 @@
+development:
+  adapter: async
+
+test:
+  adapter: async
+
+production:
+  adapter: redis
+  url: <%= ENV.fetch("REDIS_URL") { "redis://localhost:6379/1" } %>
+  channel_prefix: dummy_production

data/test/dummy/config/environment.rb

@@ -1,5 +1,5 @@
 # Load the Rails application.
-require File.expand_path('../application', __FILE__)
+require_relative 'application'
 
 # Initialize the Rails application.
-Dummy::Application.initialize!
+Rails.application.initialize!

data/test/dummy/config/environments/development.rb

@@ -1,4 +1,4 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # In the development environment your application's code is reloaded on
@@ -9,21 +9,53 @@ Dummy::Application.configure do
   # Do not eager load code on boot.
   config.eager_load = false
 
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  # Run rails dev:cache to toggle caching.
+  if Rails.root.join('tmp', 'caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Store uploaded files on the local file system (see config/storage.yml for options)
+  config.active_storage.service = :local
 
   # Don't care if the mailer can't send.
   config.action_mailer.raise_delivery_errors = false
 
+  config.action_mailer.perform_caching = false
+
   # Print deprecation notices to the Rails logger.
   config.active_support.deprecation = :log
 
-  # Raise an error on page load if there are pending migrations
+  # Raise an error on page load if there are pending migrations.
   config.active_record.migration_error = :page_load
 
+  # Highlight code that triggered database queries in logs.
+  config.active_record.verbose_query_logs = true
+
   # Debug mode disables concatenation and preprocessing of assets.
   # This option may cause significant delays in view rendering with a large
   # number of complex assets.
   config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  config.file_watcher = ActiveSupport::EventedFileUpdateChecker
 end

data/test/dummy/config/environments/production.rb

@@ -1,11 +1,11 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # Code is not reloaded between requests.
   config.cache_classes = true
 
   # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both thread web servers
+  # your application in memory, allowing both threaded web servers
   # and those relying on copy on write to perform better.
   # Rake tasks automatically ignore this option for performance.
   config.eager_load = true
@@ -14,13 +14,13 @@ Dummy::Application.configure do
   config.consider_all_requests_local       = false
   config.action_controller.perform_caching = true
 
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
+  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
+  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
 
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
 
   # Compress JavaScripts and CSS.
   config.assets.js_compressor = :uglifier
@@ -29,52 +29,66 @@ Dummy::Application.configure do
   # Do not fallback to assets pipeline if a precompiled asset is missed.
   config.assets.compile = false
 
-  # Generate digests for assets URLs.
-  config.assets.digest = true
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
 
-  # Version of your assets, change this if you want to expire all your assets.
-  config.assets.version = '1.0'
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
 
   # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Store uploaded files on the local file system (see config/storage.yml for options)
+  config.active_storage.service = :local
+
+  # Mount Action Cable outside main process or domain
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
 
   # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
   # config.force_ssl = true
 
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
 
   # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+  config.log_tags = [ :request_id ]
 
   # Use a different cache store in production.
   # config.cache_store = :mem_cache_store
 
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "dummy_#{Rails.env}"
 
-  # Precompile additional assets.
-  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-  # config.assets.precompile += %w( search.js )
+  config.action_mailer.perform_caching = false
 
   # Ignore bad email addresses and do not raise email delivery errors.
   # Set this to true and configure the email server for immediate delivery to raise delivery errors.
   # config.action_mailer.raise_delivery_errors = false
 
   # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation can not be found).
+  # the I18n.default_locale when a translation cannot be found).
   config.i18n.fallbacks = true
 
   # Send deprecation notices to registered listeners.
   config.active_support.deprecation = :notify
 
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
   # Use default logging formatter so that PID and timestamp are not suppressed.
   config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
 end

data/test/dummy/config/environments/test.rb

@@ -1,4 +1,4 @@
-Dummy::Application.configure do
+Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # The test environment is used exclusively to run your application's
@@ -12,9 +12,11 @@ Dummy::Application.configure do
   # preloads Rails for running tests, you may have to set it to true.
   config.eager_load = false
 
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = "public, max-age=3600"
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.to_i}"
+  }
 
   # Show full error reports and disable caching.
   config.consider_all_requests_local       = true
@@ -26,6 +28,11 @@ Dummy::Application.configure do
   # Disable request forgery protection in test environment.
   config.action_controller.allow_forgery_protection = false
 
+  # Store uploaded files on the local file system in a temporary directory
+  config.active_storage.service = :test
+
+  config.action_mailer.perform_caching = false
+
   # Tell Action Mailer not to deliver emails to the real world.
   # The :test delivery method accumulates sent emails in the
   # ActionMailer::Base.deliveries array.
@@ -33,4 +40,7 @@ Dummy::Application.configure do
 
   # Print deprecation notices to the stderr.
   config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
 end

data/test/dummy/config/initializers/application_controller_renderer.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# ActiveSupport::Reloader.to_prepare do
+#   ApplicationController.renderer.defaults.merge!(
+#     http_host: 'example.org',
+#     https: false
+#   )
+# end

data/test/dummy/config/initializers/assets.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
+# Add Yarn node_modules folder to the asset load path.
+Rails.application.config.assets.paths << Rails.root.join('node_modules')
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

data/test/dummy/config/initializers/content_security_policy.rb

@@ -0,0 +1,25 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide content security policy
+# For further information see the following documentation
+# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy
+
+# Rails.application.config.content_security_policy do |policy|
+#   policy.default_src :self, :https
+#   policy.font_src    :self, :https, :data
+#   policy.img_src     :self, :https, :data
+#   policy.object_src  :none
+#   policy.script_src  :self, :https
+#   policy.style_src   :self, :https
+
+#   # Specify URI for violation reports
+#   # policy.report_uri "/csp-violation-report-endpoint"
+# end
+
+# If you are using UJS then enable automatic nonce generation
+# Rails.application.config.content_security_policy_nonce_generator = -> request { SecureRandom.base64(16) }
+
+# Report CSP violations to a specified URI
+# For further information see the following documentation:
+# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy-Report-Only
+# Rails.application.config.content_security_policy_report_only = true

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/mime_types.rb

@@ -2,4 +2,3 @@
 
 # Add new mime types for use in respond_to blocks:
 # Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/test/dummy/config/initializers/new_framework_defaults_5_2.rb

@@ -0,0 +1,38 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file contains migration options to ease your Rails 5.2 upgrade.
+#
+# Once upgraded flip defaults one by one to migrate to the new default.
+#
+# Read the Guide for Upgrading Ruby on Rails for more info on each option.
+
+# Make Active Record use stable #cache_key alongside new #cache_version method.
+# This is needed for recyclable cache keys.
+# Rails.application.config.active_record.cache_versioning = true
+
+# Use AES-256-GCM authenticated encryption for encrypted cookies.
+# Also, embed cookie expiry in signed or encrypted cookies for increased security.
+#
+# This option is not backwards compatible with earlier Rails versions.
+# It's best enabled when your entire app is migrated and stable on 5.2.
+#
+# Existing cookies will be converted on read then written with the new scheme.
+# Rails.application.config.action_dispatch.use_authenticated_cookie_encryption = true
+
+# Use AES-256-GCM authenticated encryption as default cipher for encrypting messages
+# instead of AES-256-CBC, when use_authenticated_message_encryption is set to true.
+# Rails.application.config.active_support.use_authenticated_message_encryption = true
+
+# Add default protection from forgery to ActionController::Base instead of in
+# ApplicationController.
+# Rails.application.config.action_controller.default_protect_from_forgery = true
+
+# Store boolean values are in sqlite3 databases as 1 and 0 instead of 't' and
+# 'f' after migrating old data.
+# Rails.application.config.active_record.sqlite3.represent_boolean_as_integer = true
+
+# Use SHA-1 instead of MD5 to generate non-sensitive digests, such as the ETag header.
+# Rails.application.config.active_support.use_sha1_digests = true
+
+# Make `form_with` generate id attributes for any generated HTML tags.
+# Rails.application.config.action_view.form_with_generates_ids = true