ory-client 1.22.87 → 1.22.88

data/vendor/bundle/ruby/3.2.0/gems/ethon-0.19.1/CHANGELOG.md

@@ -0,0 +1,1120 @@
+# Changelog
+
+## Master
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.19.1...master)
+
+## 0.19.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.19.0...v0.19.1)
+
+### Behavior changes
+
+* Size a Multi's connection cache to twice the largest number of easy handles
+  attached at once. libcurl derives its default `CURLMOPT_MAXCONNECTS` from the
+  number of handles attached when a connection is returned, but Ethon detaches
+  finished handles immediately, which made the default shrink during a run and
+  close connections that later requests could have reused. An explicit
+  `maxconnects:` still takes precedence.
+  ([#455](https://github.com/typhoeus/ethon/pull/455))
+
+### Fixes and hardening
+
+* Allow `Easy#cleanup` from an `on_complete` callback. The transfer has
+  finished and a Multi detaches the handle before its callbacks run, so freeing
+  it is safe. Cleanup from body, header, and progress callbacks is still
+  rejected. This fixes `:resolve` requests in Typhoeus 1.7.0, which clean up
+  instead of pooling to avoid leaking `CURLOPT_RESOLVE` entries.
+  ([#456](https://github.com/typhoeus/ethon/pull/456),
+  [typhoeus#824](https://github.com/typhoeus/typhoeus/issues/824))
+
+## 0.19.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.18.0...v0.19.0)
+
+Before 1.0, a minor release may include incompatible API changes; review the
+breaking changes before upgrading.
+
+### Breaking changes
+
+* Unsupported libcurl callback ABIs now raise `NotImplementedError` instead of
+  being registered with the generic read/write callback signature. This affects
+  low-level setters such as `ioctlfunction=`, `seekfunction=`, and
+  `opensocketfunction=`. ([#281](https://github.com/typhoeus/ethon/pull/281))
+* Fatal errors returned by `curl_multi_perform` now raise
+  `Ethon::Errors::MultiPerform` instead of allowing Multi execution to continue
+  with invalid state. ([#286](https://github.com/typhoeus/ethon/pull/286))
+* Easy and Multi handles created before a `fork` can no longer be used or
+  cleaned up in the child process. Ethon now raises
+  `Ethon::Errors::ForkSafety`; if libcurl was initialized before forking, use
+  `fork` plus `exec`, otherwise create handles after forking.
+  ([#295](https://github.com/typhoeus/ethon/pull/295))
+* Unknown named enum and bitmask option values now raise
+  `Ethon::Errors::InvalidValue` instead of silently becoming `0`. Strings and
+  symbols are accepted equivalently, and direct integer values remain
+  supported. ([#300](https://github.com/typhoeus/ethon/pull/300))
+* Exceptions raised by `on_body` callbacks are now consistently re-raised for
+  both Easy and Multi transfers, including when verbose mode is enabled.
+  Applications that relied on these exceptions being swallowed must handle
+  them explicitly. ([#294](https://github.com/typhoeus/ethon/pull/294))
+* Errors from `curl_easy_setopt` and `curl_multi_setopt` are no longer ignored.
+  An option the loaded libcurl does not know raises
+  `Ethon::Errors::UnsupportedOption`, and other rejected values raise
+  `Ethon::Errors::SetOption`. Setting an option such as
+  `Easy#http_version = :httpv3` on a libcurl built without HTTP/3 now raises
+  instead of silently running with a different configuration.
+  `Curl.supports_option?` and `Curl.version_at_least?` can be used to guard
+  optional settings.
+  ([#343](https://github.com/typhoeus/ethon/pull/343))
+* `require 'ethon'` no longer loads mime-types: the registry is loaded on the
+  first file upload instead, saving about 2.4 MB and 100 ms per process. Code
+  relying on ethon to load `MIME::Types` must now require it itself.
+  ([Clément Joubert](https://github.com/czj),
+  [#320](https://github.com/typhoeus/ethon/pull/320))
+* `Easy#cleanup` and `Multi#cleanup` are terminal, and `Easy#perform` and
+  `Easy#reset` raise while the handle is attached to a `Multi`. Applications
+  that reused cleaned-up or attached handles must create new ones.
+  ([#326](https://github.com/typhoeus/ethon/pull/326),
+  [#339](https://github.com/typhoeus/ethon/pull/339),
+  [#346](https://github.com/typhoeus/ethon/pull/346),
+  [#382](https://github.com/typhoeus/ethon/pull/382))
+
+### Behavior changes
+
+* Verbose debug output is written through `Ethon.logger` at the debug level
+  instead of directly to stdout, so request and response headers no longer
+  bypass the application's logging configuration. Set
+  `Ethon.logger.level = Logger::DEBUG` to keep seeing the messages; response
+  body data is not logged.
+  ([#390](https://github.com/typhoeus/ethon/pull/390))
+* Assigning a new native handle to an `Easy`, including `Easy.new(handle: ...)`
+  and `Easy#handle = nil`, now installs Ethon's response callbacks and replays
+  the callbacks retained by the object. Constructor options are applied to a
+  supplied handle instead of the handle Ethon created and discarded.
+  ([#402](https://github.com/typhoeus/ethon/pull/402))
+* `Easy#postfields=` now sets `CURLOPT_POSTFIELDSIZE` from the retained bytes
+  and restores libcurl's default (`-1`) when the body is cleared. This keeps a
+  previous, larger body size from being applied to a shorter body. Set
+  `postfieldsize` after `postfields` when sending a prefix or another length.
+  ([#403](https://github.com/typhoeus/ethon/pull/403))
+* `Easy#postfields=` and `Easy#copypostfields=` now send binary bodies without
+  truncating them at the first NUL. A `postfieldsize` larger than the retained
+  body raises `Ethon::Errors::InvalidValue` instead of making libcurl read
+  past the buffer. Copying a new body without an explicit size sets the exact
+  byte length, and clearing the copied body clears the size as well.
+  ([#436](https://github.com/typhoeus/ethon/pull/436))
+* `Multi.new` now accepts `max_host_connections`, `max_pipeline_length`,
+  `content_length_penalty_size`, and `chunk_length_penalty_size`, which were
+  already in the multi option table but had no setters.
+  ([#444](https://github.com/typhoeus/ethon/pull/444))
+* `Share#unlockfunction` callbacks now receive `(handle, data, userp)`, the
+  arguments defined by `curl_unlock_function`. They previously used the lock
+  callback signature, so the user pointer was read as an access mode and the
+  callback received a garbage fourth argument.
+  ([#405](https://github.com/typhoeus/ethon/pull/405))
+* `Easy#header` and `Easy#each_header` now default to the last request in a
+  transfer (`request = -1`), so structured headers describe the response after
+  a redirect instead of the first request. Pass `0` to read the first request.
+  ([#409](https://github.com/typhoeus/ethon/pull/409))
+* `Easy#url=` now stores a frozen snapshot of the string libcurl accepted, and
+  `Easy#request_headers` returns a fresh copy of the headers and header values
+  that were accepted. Mutating the object passed to a setter no longer makes
+  the accessor describe a URL or header set the handle never received.
+  ([#413](https://github.com/typhoeus/ethon/pull/413),
+  [#418](https://github.com/typhoeus/ethon/pull/418))
+* Multipart POST and PUT bodies now use the MIME API when the loaded libcurl
+  supports it, and fall back to the deprecated form API on older builds. Part
+  names, files, filenames, content types, and regular fields are preserved.
+  ([#318](https://github.com/typhoeus/ethon/pull/318))
+* Explicit `writefunction`, `headerfunction`, and `debugfunction` options
+  passed to `Easy.new` are no longer overwritten by Ethon's internal
+  callbacks. A response that aborts from `on_headers` also leaves the buffered
+  body empty.
+  ([#345](https://github.com/typhoeus/ethon/pull/345))
+* Empty HTTP header values now follow libcurl semantics: `"Accept" => ""`
+  suppresses libcurl's default header, while `"X-Empty;" => ""` sends an empty
+  header. ([gonubana](https://github.com/gonubana),
+  [#225](https://github.com/typhoeus/ethon/pull/225))
+
+### Enhancements
+
+* Added opt-in `CURLOPT_ERRORBUFFER` support through `Easy#errorbuffer=` and
+  `Easy#error_message`, including reset, duplication, Multi, and Mirror support.
+  ([Adrien Rey-Jarthon](https://github.com/jarthod),
+  [#277](https://github.com/typhoeus/ethon/pull/277))
+* Added `Easy#file=` and `Easy#writedata=` to stream response bodies to a path
+  or writable Ruby object without accumulating the body in memory. The original
+  implementation and authorship were preserved from PR #100.
+  ([Seth Madison](https://github.com/baconz),
+  [#298](https://github.com/typhoeus/ethon/pull/298))
+* Added block-based `Easy#debugfunction` observers while preserving Ethon's
+  internal debug collection and safely propagating callback errors.
+  ([Kai Lieth](https://github.com/klieth),
+  [#154](https://github.com/typhoeus/ethon/pull/154))
+* Added `Easy#ssl_engines`, `Easy#cookielist`, and `Easy#certinfo`. Slist
+  results are copied and freed according to libcurl ownership rules, while
+  certificate lists are copied without freeing libcurl-owned memory. The
+  relevant implementation and authorship were preserved from PR #74.
+  ([Jethro Beekman](https://github.com/jethrogb),
+  [#299](https://github.com/typhoeus/ethon/pull/299))
+* Added multipart PUT support. ([#292](https://github.com/typhoeus/ethon/pull/292))
+* Released the Ruby GVL around `curl_multi_perform` and native handle cleanup.
+  ([Vladimir Shteinman](https://github.com/Bobochka),
+  [#278](https://github.com/typhoeus/ethon/pull/278))
+* Added libcurl error codes 89 through 101.
+  ([Adrien Rey-Jarthon](https://github.com/jarthod),
+  [#276](https://github.com/typhoeus/ethon/pull/276))
+* Added the remaining libcurl 8.7.1 options, info values, blob options, enum
+  table entries, and symbolic option values, including DoH, HSTS, Alt-Svc,
+  AWS SigV4, SASL, HTTP/3, TLS 1.3 ciphers, proxy headers, and the modern
+  `_t`, socket, and pointer info getters.
+  ([#307](https://github.com/typhoeus/ethon/pull/307),
+  [#308](https://github.com/typhoeus/ethon/pull/308),
+  [#309](https://github.com/typhoeus/ethon/pull/309))
+* `Multi` now prefers `curl_multi_poll` and `curl_multi_wait` over `select`,
+  allocating fd sets only for the fallback. This reduces `Multi.new` memory
+  from roughly 199 KB to 7 KB on hosts with a large fd limit and avoids 1ms
+  busy-waiting when no descriptor is ready.
+  ([#330](https://github.com/typhoeus/ethon/pull/330))
+* Added support for current Windows libcurl DLL names: `libcurl-4`,
+  `libcurl-x64`, and `libcurl-arm64`.
+  ([Shizuo Fujita](https://github.com/Watson1978),
+  [#271](https://github.com/typhoeus/ethon/pull/271))
+* Added `ETHON_CURL_LIBS` to override the native libcurl library names.
+  ([Sergey Tarasov](https://github.com/dzirtusss),
+  [#235](https://github.com/typhoeus/ethon/pull/235))
+
+### New libcurl bindings
+
+* Added a URL API wrapper (`Ethon::Curl::Url`) with `get`, `set`, `dup`, and
+  `to_s`, plus the `CURLU_*` part, code, and flag enums.
+  ([#311](https://github.com/typhoeus/ethon/pull/311))
+* Added a MIME API wrapper (`Ethon::Curl::Mime`, `Ethon::Curl::MimePart`) and
+  `Easy#mime=`/`#mimepost=` for multipart bodies, including per-part headers.
+  ([#312](https://github.com/typhoeus/ethon/pull/312))
+* Added a share API wrapper (`Ethon::Curl::Share`) with `Easy#share=` and
+  lock/unlock callbacks for multi-threaded sharing.
+  ([#313](https://github.com/typhoeus/ethon/pull/313))
+* Added structured response headers (`Easy#header`, `Easy#each_header`,
+  `Easy#headers_list`), option introspection (`Curl.easy_option`,
+  `Curl.option_by_id`, `Curl.each_easy_option`), and version introspection
+  (`Curl.protocols`, `Curl.feature_names`, `Curl.version_info_full`).
+  ([#314](https://github.com/typhoeus/ethon/pull/314))
+* Added `Easy#unescape`, `Easy#pause`, `Easy#upkeep`, `Multi#wait`,
+  `Multi#poll`, and `Multi#wakeup`.
+  ([#310](https://github.com/typhoeus/ethon/pull/310))
+* Added `Multi#assign`, `Multi#native_handles`, the `Curl::SslBackend` enum,
+  and optional `curl_global_sslset`/`curl_global_trace` bindings.
+  ([#315](https://github.com/typhoeus/ethon/pull/315))
+
+Functions that are not exported by the loaded libcurl are attached
+conditionally. Wrappers raise `NotImplementedError` when the function they need
+is unavailable; introspection helpers return `nil` or an empty array.
+
+### Fixes and hardening
+
+* Callback errors are now raised after the transfer has completed, so
+  `on_complete` callbacks still run and an `Easy` is removed from its `Multi`
+  before the error reaches the caller.
+  ([#302](https://github.com/typhoeus/ethon/pull/302))
+* A failed `curl_easy_init` or `curl_multi_init` now raises `NoMemoryError`
+  immediately instead of wrapping address `0` and deferring the failure.
+  ([#305](https://github.com/typhoeus/ethon/pull/305))
+* `Easy#headers=` now rejects CR and LF in header names and values with
+  `Ethon::Errors::InvalidValue`, so custom headers cannot inject additional
+  request headers.
+  ([#327](https://github.com/typhoeus/ethon/pull/327))
+* PUT bodies now honor `escape: false` instead of always percent-encoding the
+  form, matching POST behavior.
+  ([#328](https://github.com/typhoeus/ethon/pull/328))
+* Numeric option values are now checked against the signed range of the
+  native type before being passed to libcurl. Values outside the range raise
+  `Ethon::Errors::InvalidValue` instead of a later `RangeError` or FFI error.
+  ([#329](https://github.com/typhoeus/ethon/pull/329))
+* Request header lists are freed when a later header is invalid or
+  `curl_slist_append` fails, and unknown header origins raise
+  `Ethon::Errors::InvalidValue` instead of reaching libcurl as `0`.
+  ([#347](https://github.com/typhoeus/ethon/pull/347))
+* Response stream teardown now only finishes the destination that the completed
+  transfer wrote to. A completion callback can schedule the next transfer on
+  the same `Easy` (including adding it to a `Multi` with a new or reused
+  response file); that destination is no longer closed before the next transfer
+  runs. `Multi#add` finishes the previous transfer's stream before preparing
+  the next one, and no longer clears a pending callback error while the Easy is
+  completing, so the error from the finished transfer is still raised. A
+  failing close or flush also no longer replaces the callback or completion
+  error, and `Multi#perform` runs `on_complete` before raising a teardown error
+  for a handle libcurl already detached.
+  ([#431](https://github.com/typhoeus/ethon/pull/431))
+* `Multi#assign` rejects a nil or non-integer socket descriptor with
+  `Ethon::Errors::InvalidValue` instead of letting FFI raise `TypeError`.
+  ([#432](https://github.com/typhoeus/ethon/pull/432))
+* `Curl::Url#clone` now duplicates the native URL handle through
+  `curl_url_dup`, like `#dup`, instead of raising
+  `cannot duplicate FFI::AutoPointer`.
+  ([#433](https://github.com/typhoeus/ethon/pull/433))
+* Response bodies written to a Ruby IO now retry short writes. Wrapper and
+  nonblocking destinations could accept fewer bytes than a chunk without
+  raising, and the rest of the chunk was silently lost. A write that reports
+  zero progress now fails the transfer, while destinations returning `nil`
+  keep their previous behavior.
+  ([#443](https://github.com/typhoeus/ethon/pull/443))
+* `Easy#file=` now opens a new path before releasing the previous response
+  destination. A bad path raises without discarding the file that was already
+  configured, so the next `perform` still writes to it.
+  ([#439](https://github.com/typhoeus/ethon/pull/439))
+* A duplicated `Easy` keeps a configured response file path and opens its own
+  stream for the next transfer. A caller-owned IO is still dropped so the two
+  handles cannot write into the same object.
+  ([#435](https://github.com/typhoeus/ethon/pull/435))
+* Multipart forms no longer treat every `Array` value as a file upload. With
+  `params_encoding: :none`, ordinary arrays stay data, and file values are
+  marked by `Queryable::FileInfo`. Raw `String` bodies are rejected when
+  `multipart: true` is requested instead of producing an unnamed part or a
+  `NoMethodError`.
+  ([#441](https://github.com/typhoeus/ethon/pull/441),
+  [#438](https://github.com/typhoeus/ethon/pull/438))
+* `InvalidOption`, `UnsupportedOption`, and `SetOption` now inspect the option
+  name in their messages, so control characters in an untrusted option key
+  cannot inject lines into logs.
+  ([#442](https://github.com/typhoeus/ethon/pull/442))
+* Corrected API annotations for the `Easy#perform` and `Easy#handle` return
+  types, the `Multi` option setter parameter types, and `Multi#socket_action`.
+  ([#445](https://github.com/typhoeus/ethon/pull/445))
+* Assigning a replacement handle now clears the Ruby-side URL, headers,
+  postfields, URL/MIME/slist/blob/share state, response, and return code,
+  because the new handle does not have them. `Easy#dup` keeps that state
+  because the native duplicate already carries it.
+  ([#448](https://github.com/typhoeus/ethon/pull/448))
+* `Ethon::Errors::InvalidValue` now escapes the value in its message, so a
+  CR or LF in a rejected URL or request-line value can no longer be injected
+  into logs that record the exception.
+  ([#429](https://github.com/typhoeus/ethon/pull/429))
+* The `haproxy_client_ip` option now rejects whitespace. libcurl writes the
+  value into the space-separated PROXY protocol line without validating it, so
+  a value could add fields or lines to the header.
+  ([#428](https://github.com/typhoeus/ethon/pull/428))
+* URL values now reject CR and LF before libcurl stores them. libcurl's URL
+  API wrote line breaks in paths and queries into the request line verbatim,
+  so a URL handle attached with `Easy#curlu=` could inject headers. The string
+  setter accepted the same input into `Easy#url` and debug logs before the
+  transfer failed. Percent-encoded line breaks remain valid.
+  ([#419](https://github.com/typhoeus/ethon/pull/419),
+  [#425](https://github.com/typhoeus/ethon/pull/425))
+* `Curl::Url.new(existing_url)` now duplicates the handle instead of re-parsing
+  its string form. Partial handles can be copied, complete handles are not
+  normalized, and non-zero `CURLU_*` flags are rejected for a copy because
+  there is no parse step to apply them to.
+  ([#420](https://github.com/typhoeus/ethon/pull/420))
+* `Multi#add` and `#delete` now roll back their Ruby-side stack when the native
+  add or remove raises, `Easy#cleanup` refuses to free an attached handle, and
+  `Multi#cleanup` detaches every easy handle and is terminal. Socket and timer
+  callbacks are kept until the native multi is cleaned up.
+  ([#326](https://github.com/typhoeus/ethon/pull/326))
+* `Multi#delete` and `Multi#cleanup` now clear the running count when the stack
+  becomes empty, so `Multi#ongoing?` is false after the last handle is removed.
+  A handle that libcurl detached before a socket callback raised is no longer
+  put back on the stack, so it remains usable.
+  ([#421](https://github.com/typhoeus/ethon/pull/421))
+* `Easy#reset_transfer_state` clears `return_code`, so adding a used Easy to a
+  Multi no longer exposes the previous transfer's result until the new transfer
+  completes.
+  ([#422](https://github.com/typhoeus/ethon/pull/422))
+* Streamed response destinations are flushed before `on_complete`, and
+  caller-owned response IOs are flushed when the transfer finishes. Previously
+  completion callbacks could read a partial body, and caller-owned file writers
+  needed an explicit flush after `perform`.
+  ([#424](https://github.com/typhoeus/ethon/pull/424))
+* `Easy#log_inspect` redacts credentials in `effective_url` so debug logs do not
+  contain URL passwords. The same redaction applies to
+  `Mirror#log_informations`; `Easy#effective_url` and `Mirror#options` still
+  return the exact URL.
+  ([#423](https://github.com/typhoeus/ethon/pull/423))
+* Corrected the mirror and query-parameter specs so they assert the constants
+  and null-byte cases they describe.
+  ([#426](https://github.com/typhoeus/ethon/pull/426))
+* Clearing `writefunction`, `headerfunction`, or `debugfunction` now restores
+  Ethon's internal callback. libcurl's default callback previously wrote
+  response bodies to stdout, stopped collecting response headers, or sent
+  verbose output to stderr.
+  ([#410](https://github.com/typhoeus/ethon/pull/410))
+* `Easy#handle=` now frees the native handle it replaces when this Easy owned
+  it, and reattaches the error buffer and `noprogress` setting to the
+  replacement. Replacing a handle no longer leaks it, and `#error_message` and
+  progress callbacks keep working.
+  ([#411](https://github.com/typhoeus/ethon/pull/411))
+* `Multi#cleanup` now continues detaching the remaining easy handles after one
+  native detach or streamed-response close fails, instead of leaving them
+  attached to a cleaned-up Multi. The first error is still raised after
+  teardown.
+  ([#412](https://github.com/typhoeus/ethon/pull/412))
+* `Curl::Mime.new` now rejects handles that are not an `Ethon::Easy`, an
+  `Ethon::Curl::EasyHandle`, or a non-null raw easy pointer. Passing another
+  owned handle, such as a `Multi`, previously reached `curl_mime_init` and
+  could crash the process. Assigning `nil` to a MIME part field now clears it
+  instead of setting an empty value or raising.
+  ([#414](https://github.com/typhoeus/ethon/pull/414))
+* `Curl::Header#origin` now masks every undocumented origin bit, not only the
+  single reserved bit current libcurl sets, so the value only contains the
+  documented `CURLH_*` bits.
+  ([#417](https://github.com/typhoeus/ethon/pull/417))
+* `Curl::Slist.build` now rejects CR, LF, and NUL in list lines, so lists used
+  for FTP quotes, SMTP recipients, and other verbatim protocol commands cannot
+  inject additional commands.
+  ([#415](https://github.com/typhoeus/ethon/pull/415))
+* `:none` options no longer interpret `false` as enabled, `Ethon.logger = nil`
+  falls back to the default logger, and `ETHON_FD_SIZE` is validated and
+  rounded up to the native fd_set word size.
+  ([#366](https://github.com/typhoeus/ethon/pull/366))
+* HTTP helper actions are resolved through an explicit class map, so custom
+  verbs that collide with `Ethon::Easy::Http` constants such as `:custom` or
+  `:actionable` are sent as custom requests instead of raising.
+  ([#363](https://github.com/typhoeus/ethon/pull/363))
+* The `select` fallback in `Multi#set_fds` now sleeps for the libcurl timeout
+  when no file descriptors are ready instead of busy-waiting in 1ms steps.
+  ([#364](https://github.com/typhoeus/ethon/pull/364))
+* `Easy#file=` treats writable path-like objects such as `Pathname` as paths
+  instead of caller-owned IOs, so the response is no longer truncated on every
+  write. ([#360](https://github.com/typhoeus/ethon/pull/360))
+* MIME part headers now reject CR, LF, and NUL bytes instead of passing them
+  verbatim to libcurl. Empty header lines are dropped, so assigning an empty
+  string clears the part headers instead of adding an empty header line.
+  ([#362](https://github.com/typhoeus/ethon/pull/362))
+* `CURLOPT_COPYPOSTFIELDS` values are now NUL-terminated, and assigning `nil`
+  passes a NULL pointer instead of a zero-length buffer.
+  ([#359](https://github.com/typhoeus/ethon/pull/359))
+* `Easy#url=` and `Easy#postfields=` only update the Ruby-side value after
+  libcurl accepts the option, so a rejected value cannot leave the accessors
+  describing state the handle never received. `Easy#postfields=` also retains
+  a frozen snapshot of the string libcurl points at, so caller mutations cannot
+  change the request or leave libcurl reading a reallocated buffer.
+  ([#350](https://github.com/typhoeus/ethon/pull/350),
+  [#374](https://github.com/typhoeus/ethon/pull/374))
+* `Easy#cleanup` drops references to native-backed strings, lists, MIME/URL
+  handles, blobs, and callbacks after freeing the handle. It also drops the
+  response, progress, and debug callback closures, and `Multi#cleanup` drops
+  its retained socket and timer callbacks, so terminal cleanup does not keep
+  application state alive.
+  ([#365](https://github.com/typhoeus/ethon/pull/365),
+  [#381](https://github.com/typhoeus/ethon/pull/381))
+* `Multi#cleanup` now releases the native multi handle even when detaching an
+  easy handle or closing a streamed response fails, and keeps multi ownership
+  on an easy handle whose native detach failed so it cannot be reused.
+  ([#352](https://github.com/typhoeus/ethon/pull/352))
+* `Multi#handle` and `Multi#cleanup` now enforce fork safety before allocating
+  or releasing a native multi handle, and `Easy#reset`/`#perform` validate the
+  handle before clearing response state, so a cleaned up or inherited handle
+  cannot truncate a response file or discard the previous result while raising.
+  ([#358](https://github.com/typhoeus/ethon/pull/358))
+* `Easy#handle=` now wraps a raw `FFI::Pointer` in an owned
+  `Ethon::Curl::EasyHandle`, so the documented setter produces a usable handle
+  that fork safety tracks and `#cleanup` frees. Other owned pointer types and
+  null pointers are rejected.
+  ([#380](https://github.com/typhoeus/ethon/pull/380))
+* `Easy#cleanup` frees the native handle even when closing a streamed response
+  fails, and `Multi#add` closes an open response stream when the easy handle is
+  unusable or the native add fails.
+  ([#358](https://github.com/typhoeus/ethon/pull/358))
+* Owned handles now record an explicit `free` and raise
+  `Ethon::Errors::EthonError` when used afterwards, instead of dereferencing
+  the freed native pointer. This covers Easy and Multi handles, URL, MIME,
+  share, and slist wrappers.
+  ([#382](https://github.com/typhoeus/ethon/pull/382))
+* Option setters, MIME part header assignment, and `Multi#assign` reject freed
+  owned pointers instead of handing libcurl a dangling address.
+  ([#382](https://github.com/typhoeus/ethon/pull/382),
+  [#408](https://github.com/typhoeus/ethon/pull/408))
+* MIME part and request header lists detect a failed `curl_slist_append`
+  allocation (FFI reports a NULL pointer, not `nil`) and free the partially
+  built list before installing it.
+  ([#347](https://github.com/typhoeus/ethon/pull/347),
+  [#353](https://github.com/typhoeus/ethon/pull/353))
+* Fixed the `:string_escape_null` option type to resolve
+  `Ethon::Easy::Util` instead of an undefined constant.
+  ([#351](https://github.com/typhoeus/ethon/pull/351))
+* Added byte-exact binary transfer tests, a full option-table cross-check
+  against libcurl's own metadata, multipart round-trip tests, end-to-end
+  coverage for the `curl_multi_wait` and `select` fallbacks, and a multi
+  response-isolation test.
+  ([#354](https://github.com/typhoeus/ethon/pull/354),
+  [#355](https://github.com/typhoeus/ethon/pull/355),
+  [#356](https://github.com/typhoeus/ethon/pull/356))
+* Reusing an `Easy` no longer leaks the previous custom HTTP method or a
+  stale `CURLOPT_CURLU` handle. `Easy#url=` clears a URL handle, `Easy#curlu=`
+  clears the string URL, and `Easy#reset` detaches the share before releasing
+  it.
+  ([#323](https://github.com/typhoeus/ethon/pull/323),
+  [#325](https://github.com/typhoeus/ethon/pull/325),
+  [#344](https://github.com/typhoeus/ethon/pull/344))
+* GET requests with a body send the body again; the method reset only applies
+  to empty GET requests.
+  ([#344](https://github.com/typhoeus/ethon/pull/344))
+* MIME parts keep a caller-provided header slist alive until libcurl replaces
+  it. ([#368](https://github.com/typhoeus/ethon/pull/368))
+* `Curl::Share#share` and `#unshare` now reject unknown or non-symbol/string
+  data types with `Ethon::Errors::InvalidValue`.
+  ([#338](https://github.com/typhoeus/ethon/pull/338))
+* `Easy#header` and `Easy#each_header` accept an array of header origins as
+  documented, and reject unknown origins. `Ethon::Curl::Header#origin` no
+  longer exposes libcurl's reserved bit, so it matches the documented
+  `CURLH_*` values in `Ethon::Curl::HeaderOrigin`.
+  ([#347](https://github.com/typhoeus/ethon/pull/347),
+  [#383](https://github.com/typhoeus/ethon/pull/383))
+* `Easy#cleanup` is terminal; using the handle afterwards raises
+  `Ethon::Errors::EthonError` instead of silently sending requests without
+  callbacks. ([#382](https://github.com/typhoeus/ethon/pull/382))
+* Exceptions raised while buffering response headers are now captured and
+  re-raised after the transfer, matching the body and debug callbacks.
+  ([#316](https://github.com/typhoeus/ethon/pull/316))
+* `Easy.supports_timeout_ms?` now checks the libcurl version instead of async
+  DNS support. ([#319](https://github.com/typhoeus/ethon/pull/319))
+* Requests no longer set `CURLOPT_HTTPPOST` on libcurl builds configured with
+  `--disable-form-api`, where the option does not exist.
+  ([#349](https://github.com/typhoeus/ethon/pull/349))
+* Corrected the native option number for `tcp_fastopen` (`CURLOPT_TCP_FASTOPEN`,
+  244) and the string ABI used by `tlsauth_type` and `proxy_tlsauth_type`.
+  `:srp` and `"srp"` are normalized to libcurl's required `"SRP"` value.
+  ([#307](https://github.com/typhoeus/ethon/pull/307))
+* String options containing NUL bytes now raise
+  `Ethon::Errors::InvalidValue` instead of FFI's `ArgumentError`, and
+  fractional or out-of-range values for integer options are rejected. Binary
+  bodies still use `copypostfields`.
+  ([#329](https://github.com/typhoeus/ethon/pull/329),
+  [#340](https://github.com/typhoeus/ethon/pull/340))
+* String options that libcurl writes verbatim into a request line, a protocol
+  header, or a protocol command now reject CR and LF. This covers
+  `customrequest`, `request_target`, `useragent`, `referer`, `cookie`,
+  `accept_encoding`, `range`, and the RTSP, SMTP, and FTP equivalents, which
+  could otherwise inject additional headers or commands.
+  ([#379](https://github.com/typhoeus/ethon/pull/379))
+* Split the progress callback ABI into `CURLOPT_PROGRESSFUNCTION` (`double`) and
+  `CURLOPT_XFERINFOFUNCTION` (`curl_off_t`), and select it using libcurl's
+  numeric version instead of string comparison.
+  ([#307](https://github.com/typhoeus/ethon/pull/307))
+* Changing `escape` or `params_encoding` after a query string was built now
+  rebuilds the cached pairs and string.
+  ([#332](https://github.com/typhoeus/ethon/pull/332))
+* Read callbacks now report the number of bytes actually read, handle
+  short-reading IO bodies, and correctly start from an IO's current position.
+  ([#307](https://github.com/typhoeus/ethon/pull/307),
+  [#344](https://github.com/typhoeus/ethon/pull/344))
+* Duplicating an `Easy` now rebinds its response, read, progress, and custom
+  callbacks to the copy instead of leaving them pointing at the original
+  handle, starts with a clean result/callback-error state, and no longer
+  aliases the original MIME structure.
+  ([#335](https://github.com/typhoeus/ethon/pull/335))
+* Custom HTTP verbs that collide with top-level Ruby constants no longer
+  resolve to those constants.
+  ([#307](https://github.com/typhoeus/ethon/pull/307),
+  [#363](https://github.com/typhoeus/ethon/pull/363))
+* `Easy#reset` now clears multipart state, request headers, retained read
+  callbacks, and pending callback errors. `Easy#request_headers` exposes the
+  request headers without colliding with the `on_headers` callback.
+  ([#307](https://github.com/typhoeus/ethon/pull/307),
+  [#323](https://github.com/typhoeus/ethon/pull/323))
+* `Easy#perform` and `Easy#reset` now refuse to run while the handle is still
+  attached to a `Multi`, matching `Easy#cleanup`.
+  ([#339](https://github.com/typhoeus/ethon/pull/339),
+  [#346](https://github.com/typhoeus/ethon/pull/346))
+* `Easy#perform`/`#reset`/`#cleanup`/`#dup` and `Multi#perform`/
+  `#socket_action`/`#cleanup` now reject reentrant calls made from callbacks
+  while the handle is still active.
+  ([#342](https://github.com/typhoeus/ethon/pull/342))
+* `Easy#perform` now returns the result of the transfer it ran even when an
+  `on_complete` callback resets the Easy. Resetting clears `#return_code`, so
+  `perform` used to return `nil` after a successful transfer.
+  ([#404](https://github.com/typhoeus/ethon/pull/404))
+* Reading `#on_body` without a block, or after clearing the callback list, no
+  longer disables response body buffering.
+  ([#334](https://github.com/typhoeus/ethon/pull/334))
+* Multi no longer mutates the caller's options, validates `execution_mode`, and
+  no longer raises when `running_count` is nil. Finalizers no longer emit
+  `ThreadError`/`SignalException` warnings.
+  ([#307](https://github.com/typhoeus/ethon/pull/307))
+* Windows `fd_set` now uses pointer-sized socket entries.
+  ([#307](https://github.com/typhoeus/ethon/pull/307))
+* Added libcurl 8.23 options (`CURLOPT_ECH`, `CURLOPT_TCP_KEEPCNT`,
+  `CURLOPT_UPLOAD_FLAGS`, `CURLOPT_SSL_SIGNATURE_ALGORITHMS`, and the
+  `CURLOPT_HTTPSIG_*` family), the newer `CURLINFO_*` entries, and
+  `CURLUE_BACKSLASH`/`CURLU_GET_EMPTY`/`CURLU_NO_GUESS_SCHEME`.
+  ([#341](https://github.com/typhoeus/ethon/pull/341))
+* `curl_global_sslset` results now use the `Curl::SslSetCode` enum. An unknown
+  backend is `:unknown_backend` instead of `:unsupported_protocol`, and a late
+  call is `:too_late` instead of `:failed_init`.
+  ([#406](https://github.com/typhoeus/ethon/pull/406))
+* Fixed the test server's keep-alive limits, cutting the suite from ~35s to
+  ~5s, and added coverage for the option table, callbacks, reset behavior,
+  Multi message handling, and libcurl info ownership.
+  ([#324](https://github.com/typhoeus/ethon/pull/324))
+* Removing an `Easy` that streams its response to a file from a `Multi`, or a
+  failed `Multi#add`, now closes the file instead of leaving it open until GC.
+  ([#336](https://github.com/typhoeus/ethon/pull/336))
+* `Multi#dup` and `Multi#clone` now raise `TypeError` instead of returning a
+  shallow copy that shares the native multi handle and easy-handle stack with
+  the original.
+  ([#372](https://github.com/typhoeus/ethon/pull/372))
+* `Easy#file=` validates the easy handle before opening a path, so a cleaned up
+  or fork-inherited handle cannot truncate the destination while raising.
+  ([#373](https://github.com/typhoeus/ethon/pull/373))
+* `Easy#url=` applies a string URL before detaching a `CURLOPT_CURLU` handle,
+  so a rejected value leaves the existing URL handle usable.
+  ([#370](https://github.com/typhoeus/ethon/pull/370))
+* `Multi#add` rejects an Easy that another Multi owns before resetting its
+  transfer state or preparing its response stream.
+  ([#369](https://github.com/typhoeus/ethon/pull/369))
+* MIME part content types and encoders reject CR, LF, and NUL bytes, and the
+  other MIME part strings reject NUL bytes with `Ethon::Errors::InvalidValue`
+  instead of FFI's `ArgumentError`.
+  ([#371](https://github.com/typhoeus/ethon/pull/371))
+* `Easy` retains managed `Curl::Slist` values assigned to list-backed options
+  such as `resolve`, `connect_to`, and `quote`, so garbage collection cannot
+  free a list while libcurl still uses it.
+  ([#368](https://github.com/typhoeus/ethon/pull/368))
+* Owned native pointers now register in one shared registry, so
+  `Curl::OwnedPointer.owners` reports every live handle and the memory usage
+  test really checks for native handle leaks. Registration and release are
+  synchronized for concurrent handles.
+  ([#304](https://github.com/typhoeus/ethon/pull/304),
+  [#375](https://github.com/typhoeus/ethon/pull/375))
+* `Easy#reset` closes a streamed response file before clearing state, so a
+  close failure leaves the handle usable instead of half-reset.
+  ([#376](https://github.com/typhoeus/ethon/pull/376))
+* `Easy#complete` rejects reentrant calls from its own `on_headers` or
+  `on_complete` callbacks instead of recursing until the stack overflows.
+  ([#377](https://github.com/typhoeus/ethon/pull/377))
+* `Multi#add` no longer opens the response file, resets the transfer state, and
+  clears callback errors before libcurl accepted the handle. A failed add
+  leaves the previous response and a streamed response file untouched, rolls
+  the native attach back when preparing the response stream fails or a socket
+  or timer callback raises, and keeps a handle it cannot detach tracked so
+  `Multi#cleanup` can retry. Non-`Ethon::Easy` arguments raise `TypeError`.
+  ([#386](https://github.com/typhoeus/ethon/pull/386))
+* `Easy#dup` and `#clone` now raise `Ethon::Errors::EthonError` when the Easy
+  is still attached to a `Multi`, matching `#perform`, `#reset`, and
+  `#cleanup`. libcurl requires the source handle to be idle while it is
+  cloned, and the copy can never be part of the same multi.
+  ([#387](https://github.com/typhoeus/ethon/pull/387))
+* `Easy#share=`, `#mime=`, and `#curlu=` now raise `TypeError` for values that
+  are not the matching `Ethon::Curl` wrapper and keep the previously assigned
+  handle. Other `FFI::Pointer` values were passed to libcurl as a share, MIME,
+  or URL handle, where the wrong native layout is undefined behavior.
+  ([#388](https://github.com/typhoeus/ethon/pull/388))
+* `Curl::Url#set` and `#get` reject unknown part names and flags with
+  `Ethon::Errors::InvalidValue` instead of FFI's `ArgumentError`, and values
+  containing a NUL byte now raise `Ethon::Errors::InvalidValue` instead of
+  silently truncating the URL passed to libcurl. Other values are coerced with
+  `to_s`, and `nil` still clears a part.
+  ([#391](https://github.com/typhoeus/ethon/pull/391))
+* `Multi#easy_handles` returns a frozen snapshot instead of the mutable array
+  the multi uses for its bookkeeping. Modifying the returned array previously
+  desynchronized the Ruby-side stack from the handles libcurl had attached.
+  ([#392](https://github.com/typhoeus/ethon/pull/392))
+* `Easy#reset` is allowed from an `on_complete` callback again, restoring
+  `Typhoeus::Pool.release`, and a callback error raised during the transfer is
+  still raised after the reset. Resets from body, header, and progress
+  callbacks stay rejected.
+  ([#393](https://github.com/typhoeus/ethon/pull/393))
+* MIME part names and filenames reject CR and LF, and the deprecated form API
+  validates its field name, filename, and content type, so they cannot inject
+  extra part headers on libcurl older than 7.81.
+  ([#394](https://github.com/typhoeus/ethon/pull/394))
+* `Easy#mirror` omits pointer-valued informations such as
+  `CURLINFO_TLS_SSL_PTR`, so mirrored options stay marshalable for cached
+  responses. `Easy#tls_ssl_ptr` remains available.
+  ([#395](https://github.com/typhoeus/ethon/pull/395))
+* The `select` fallback in `Multi#set_fds` releases the GVL while waiting, so
+  other Ruby threads can run during the wait.
+  ([#396](https://github.com/typhoeus/ethon/pull/396))
+* Added `:https3` to `proxytype` and `:earlydata` to `ssl_options` and
+  `proxy_ssl_options`.
+  ([#397](https://github.com/typhoeus/ethon/pull/397))
+* Duplicating an `Easy` keeps the progress callback that was effective on the
+  original: `on_progress` no longer disappears when a custom progress function
+  is also configured.
+  ([#398](https://github.com/typhoeus/ethon/pull/398))
+* `Easy#handle=` rejects assignment while the Easy is performing, completing,
+  attached to a `Multi`, or cleaned up.
+  ([#399](https://github.com/typhoeus/ethon/pull/399))
+* Wrapping a native pointer that another `Ethon::Curl` wrapper already owns
+  now raises instead of creating a second owner that can use the pointer after
+  it is freed. `Easy#handle=` also rejects a handle owned by another Easy.
+  ([#401](https://github.com/typhoeus/ethon/pull/401))
+* Reworked Easy, Multi, slist, and multipart native ownership around typed,
+  PID-aware pointers; removed unsafe Ruby finalizers and prevented inherited
+  native cleanup after forks. ([#280](https://github.com/typhoeus/ethon/pull/280),
+  [#287](https://github.com/typhoeus/ethon/pull/287),
+  [#295](https://github.com/typhoeus/ethon/pull/295))
+* Retained option callbacks and multipart forms for the full period in which
+  libcurl may call or read them. ([#282](https://github.com/typhoeus/ethon/pull/282),
+  [#284](https://github.com/typhoeus/ethon/pull/284))
+* Kept Multi's Ruby stack consistent when native add/remove operations fail or
+  callbacks raise. ([#285](https://github.com/typhoeus/ethon/pull/285))
+* Fixed the `curl_version_info` enum ABI and Multi's
+  `CURLMOPT_MAX_TOTAL_CONNECTIONS` option number.
+  ([#279](https://github.com/typhoeus/ethon/pull/279),
+  [#283](https://github.com/typhoeus/ethon/pull/283))
+* Replaced deprecated `getdtablesize` usage with `Etc.sysconf`, with a resource
+  limit fallback and the existing `ETHON_FD_SIZE` override.
+  ([#296](https://github.com/typhoeus/ethon/pull/296))
+* Skipped NTLM integration specs when the installed libcurl has no NTLM support.
+  ([Felix Yan](https://github.com/felixonmars),
+  [#275](https://github.com/typhoeus/ethon/pull/275))
+
+### Documentation and maintenance
+
+* Documented thread, callback, signal, and fork safety requirements.
+  ([#297](https://github.com/typhoeus/ethon/pull/297),
+  [#303](https://github.com/typhoeus/ethon/pull/303))
+* Documented the URL, MIME, share, header, and introspection APIs, rewrote the
+  README overview and usage sections, and fixed a stale documentation link and
+  parameter names.
+  ([#317](https://github.com/typhoeus/ethon/pull/317),
+  [#451](https://github.com/typhoeus/ethon/pull/451),
+  [#453](https://github.com/typhoeus/ethon/pull/453))
+* Corrected `CURLMOPT_PIPELINING` documentation to describe its integer bitmask
+  values. ([Bernard Mak](https://github.com/b2mak),
+  [#239](https://github.com/typhoeus/ethon/pull/239))
+* Updated curl documentation and repository links.
+  ([Olle Jonsson](https://github.com/olleolleolle),
+  [#237](https://github.com/typhoeus/ethon/pull/237))
+* Removed stale test-server entry points.
+  ([Vít Ondruch](https://github.com/voxik),
+  [#256](https://github.com/typhoeus/ethon/pull/256))
+* Corrected deprecation wording, warning text, and error message spelling.
+  ([#331](https://github.com/typhoeus/ethon/pull/331),
+  [#333](https://github.com/typhoeus/ethon/pull/333))
+* Added regression coverage for uncovered Easy and Multi behavior, require-time
+  memory use, GVL scheduling, GC and native handle leaks, encoding properties,
+  cleanup/MIME/reuse paths, and libcurl 8.23 differences.
+  ([#306](https://github.com/typhoeus/ethon/pull/306),
+  [#321](https://github.com/typhoeus/ethon/pull/321),
+  [#322](https://github.com/typhoeus/ethon/pull/322),
+  [#337](https://github.com/typhoeus/ethon/pull/337),
+  [#348](https://github.com/typhoeus/ethon/pull/348),
+  [#361](https://github.com/typhoeus/ethon/pull/361),
+  [#385](https://github.com/typhoeus/ethon/pull/385),
+  [#430](https://github.com/typhoeus/ethon/pull/430),
+  [#449](https://github.com/typhoeus/ethon/pull/449))
+* Expanded CI through Ruby 4.0, retained required Ruby 2.6 coverage, added a
+  master-only latest-libcurl build, added Windows coverage, and reduced matrix
+  setup time.
+  ([Geremia Taglialatela](https://github.com/tagliala),
+  [#274](https://github.com/typhoeus/ethon/pull/274),
+  [#288](https://github.com/typhoeus/ethon/pull/288),
+  [#289](https://github.com/typhoeus/ethon/pull/289),
+  [#290](https://github.com/typhoeus/ethon/pull/290),
+  [#291](https://github.com/typhoeus/ethon/pull/291),
+  [#293](https://github.com/typhoeus/ethon/pull/293),
+  [#450](https://github.com/typhoeus/ethon/pull/450))
+
+## 0.18.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.17.0...v0.18.0)
+
+* Fixed verbose mode attempting to print binary SSL data by replacing it with a summary.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#265](https://github.com/typhoeus/ethon/pull/265))
+* Fixed `on_headers` callbacks being called once per header line instead of once for all headers.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#264](https://github.com/typhoeus/ethon/pull/264))
+* Stabilized test server boot on macOS by fixing IPv6/IPv4 localhost resolution and preventing orphaned processes.
+  ([Geremia Taglialatela](https://github.com/tagliala), [#261](https://github.com/typhoeus/ethon/pull/261))
+* Added `logger` to runtime dependencies for Ruby 3.5+ compatibility.
+  ([Geremia Taglialatela](https://github.com/tagliala), [#259](https://github.com/typhoeus/ethon/pull/259))
+* Opted-in for MFA requirement explicitly by adding `rubygems_mfa_required` metadata.
+  ([Geremia Taglialatela](https://github.com/tagliala), [#257](https://github.com/typhoeus/ethon/pull/257))
+* Removed redundant encoding and require_relative checks.
+  ([Geremia Taglialatela](https://github.com/tagliala), [#258](https://github.com/typhoeus/ethon/pull/258))
+
+## 0.17.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.16.0...v0.17.0)
+
+* Require Ruby 2.6+ and simplify Gemfile.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#255](https://github.com/typhoeus/ethon/pull/255))
+* Fixed mismatched libcurl error codes in `easy_codes` array.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#253](https://github.com/typhoeus/ethon/pull/253))
+* Add Ruby 3.3 and 3.4, remove Ruby 2.5 from CI matrix.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#252](https://github.com/typhoeus/ethon/pull/252))
+* Skip test due to libcurl 8.7.x bug in CURLINFO_REQUEST_SIZE.
+  ([Felipe Mesquita](https://github.com/felipedmesquita), [#251](https://github.com/typhoeus/ethon/pull/251))
+* Use `Rackup::Handler.default` for Rack 3 compatibility.
+  ([Vít Ondruch](https://github.com/voxik), [#244](https://github.com/typhoeus/ethon/pull/244))
+* Add Ruby 3.1 and 3.2 to the test matrix.
+  ([Orien Madgwick](https://github.com/orien), [#228](https://github.com/typhoeus/ethon/pull/228))
+* Remove development and test files from the gem package.
+  ([Orien Madgwick](https://github.com/orien), [#227](https://github.com/typhoeus/ethon/pull/227))
+* Fix missing parenthesis in example.
+  ([Aleksey Tsalolikhin](https://github.com/atsalolikhin-spokeo), [#226](https://github.com/typhoeus/ethon/pull/226))
+
+## 0.16.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.15.0...v0.16.0)
+
+* Added `redirect_url` value to available informations and `Easy::Mirror`.
+  ([Adrien Rey-Jarthon](https://github.com/jarthod)
+
+## 0.15.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.14.0...v0.15.0)
+
+## 0.12.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.11.0...v0.12.0)
+
+- Removed deprecated `CURLE_SSL_CACERT` pinned in curl v7.62.0 ([@arku](https://github.com/arku) in [#158](https://github.com/typhoeus/ethon/pull/158))
+
+
+## 0.11.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.10.1...v0.11.0)
+
+## 0.10.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.10.0...v0.10.1)
+
+## 0.10.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.9.1...v0.10.0)
+
+## 0.9.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.9.0...v0.9.1)
+
+## 0.9.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.8.1...v0.9.0)
+
+## 0.8.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.8.0...v0.8.1)
+
+* Support optional escaping of params.
+  ([Tasos Laskos](https://github.com/zapotek)
+* `Easy::Mirror`: Reduced object allocations and method calls during info handling.
+  ([Tasos Laskos](https://github.com/zapotek)
+
+## 0.8.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.7.3...v0.7.4)
+
+* `Easy::Mirror`: Reduced object allocations and method calls during info handling.
+  ([Tasos Laskos](https://github.com/zapotek)
+
+## 0.7.4
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.7.3...v0.7.4)
+
+* Support different array encodings for params.
+  ([Marcello Barnaba](https://github.com/ifad), [\#104](https://github.com/typhoeus/ethon/pull/104))
+* Programtic access to version infos.
+  ([Jonas Wagner](https://github.com/jwagner), [\#90](https://github.com/typhoeus/ethon/pull/90))
+
+
+## 0.7.3
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.7.2...v0.7.3)
+
+* `Ethon::Curl::FDSet`
+    * Set `:fd_array` size to the current MS Windows `FD_SETSIZE` (2048).
+        ([Tasos Laskos](https://github.com/zapotek)
+
+* Added `redirect_time` value to available informations and `Easy::Mirror`.
+  ([Adrien Jarthon](https://github.com/jarthod)
+
+## 0.7.2
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.7.1...v0.7.2)
+
+* FFI data-types updated to be more correct.
+
+## 0.7.1
+
+* MS Windows determination delegated to `Gem.windows?` for better accuracy.
+* FFI data-types updated to work on MS Windows.
+
+## 0.7.0
+
+Not backwards compatible changes:
+
+* `mime-types` are no longer a dependency. The gem will be still used if available to determine the mime type of a file which is uploaded. That means you have to have take care of the gem installation yourself.
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.6.3...v0.7.0)
+
+## 0.6.3
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.6.2...v0.6.3)
+
+## 0.6.2
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.6.1...v0.6.2)
+
+## 0.6.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.6.0...v0.6.1)
+
+The changelog entries are coming soon!
+
+## 0.6.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.12...v0.6.0)
+
+The changelog entries are coming soon!
+
+Bugfixes:
+
+  * URL-encode nullbytes in parameters instead of escaping them to `\\0`.
+    ([Tasos Laskos](https://github.com/zapotek)
+
+## 0.5.12
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.11...v0.5.12)
+
+Enhancements:
+
+* Performance optimizations.
+  ([Kyle Oppenheim](https://github.com/koppenheim) and [Richie Vos](https://github.com/richievos), [\#48](https://github.com/typhoeus/ethon/pull/48))
+* Reuse memory pointer.
+  ([Richie Vos](https://github.com/richievos), [\#49](https://github.com/typhoeus/ethon/pull/49))
+
+Bugfixes:
+
+* Fix windows install.
+  ([Derik Olsson](https://github.com/derikolsson), [\#47](https://github.com/typhoeus/ethon/pull/47))
+* Handle urls that already contain query params.
+  ([Turner King](https://github.com/turnerking ), [\#45](https://github.com/typhoeus/ethon/pull/45))
+
+## 0.5.11
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.10...v0.5.11)
+
+Enhancements:
+
+* Add support for postredirs, unrestricted_auth.
+* Add support for cookie, cookiejar, cookiefile.
+  ([erwanlr](https://github.com/erwanlr), [\#46](https://github.com/typhoeus/ethon/pull/46))
+* Relax ffi requirements.
+  ([voxik](https://github.com/voxik), [\#40](https://github.com/typhoeus/ethon/pull/40))
+* Various documentation improvements.
+  ([Craig Little](https://github.com/craiglittle))
+
+Bugfixes:
+
+* Fix the memory leaks.
+  ([Richie Vos](https://github.com/richievos), [\#45](https://github.com/typhoeus/ethon/pull/45))
+
+## 0.5.10
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.9...v0.5.10)
+
+Enhancements:
+
+* Allow custom requests.
+  ([Nathan Sutton](https://github.com/nate), [\#36](https://github.com/typhoeus/ethon/pull/36))
+* Use updated version of FFI.
+
+Bugfixes:
+
+* Fix windows install issue.
+  ([brainsucker](https://github.com/brainsucker), [\#38](https://github.com/typhoeus/ethon/pull/38))
+
+## 0.5.9
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.8...v0.5.9)
+
+Enhancements:
+
+* Allow to set multiple protocols.
+
+## 0.5.8
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.7...v0.5.8)
+
+Enhancements:
+
+* Add support for protocols and redir_protocols(
+  [libcurl SASL buffer overflow vulnerability](https://curl.se/docs/adv_20130206.html)).
+* Add max_send_speed_large and max_recv_speed_large([Paul Schuegraf](https://github.com/pschuegr), [\#33](https://github.com/typhoeus/ethon/pull/33))
+
+## 0.5.7
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.6...v0.5.7)
+
+Enhancements:
+
+* Use new version of ffi.
+
+## 0.5.6
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.4...v0.5.6)
+
+Bugfixes:
+
+* Easy#reset resets on_complete callbacks.
+
+## 0.5.4
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.3...v0.5.4)
+
+Enhancements:
+
+* Use Libc#getdtablesize to get the FDSet size.
+* New libcurl option accept_encoding.
+* Documentation updates.
+
+## 0.5.3
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.2...v0.5.3)
+
+Enhancements:
+
+* Deprecate Easy#prepare. It is no longer necessary.
+* Unroll metaprogramming for easy and multi options.
+* More specs.
+
+Bugfixes:
+
+* Correct size for FDSets
+* Add proxytypes to enums.
+
+## 0.5.2
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.1...v0.5.2)
+
+Enhancements:
+
+* New libcurl option keypasswd.
+
+Bugfixes:
+
+* Correct request logging when using multi interface.
+* Remove invalid libcurl option sslcertpasswd.
+
+## 0.5.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.5.0...v0.5.1)
+
+Bugfixes:
+
+* Mark Curl.select and Curl.easy_perform as blocking so that the GIL is
+  released by ffi.
+
+## 0.5.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.4.4...v0.5.0)
+
+Enhancements:
+
+* New libcurl option proxyuserpwd
+* Rename response_header to response_headers
+
+Bugfixes:
+
+* Mark Curl.select and Curl.easy_perform as blocking so that the GIL is
+  released by ffi.
+
+## 0.4.4
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.4.3...v0.4.4)
+
+Enhancements:
+
+* Prepare multi explicit like easy
+
+## 0.4.3
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.4.2...v0.4.3)
+
+Enhancements:
+
+* Remove deprecated libcurl option put
+* More documentation
+* New libcurl option connecttimeout_ms and timeout_ms
+* Support multi options
+
+Bugfixes:
+
+* Handle nil values in query params
+
+## 0.4.2
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.4.1...v0.4.2)
+
+Enhancements:
+
+* New libcurl option forbid_reuse
+* Use libcurls escape instead of CGI::escape
+
+## 0.4.1
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.4.0...v0.4.1)
+
+Bugfixes:
+
+* Handle nested hash in an array in params correct
+  ( [\#201](https://github.com/typhoeus/typhoeus/issues/201) )
+
+## 0.4.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.3.0...v0.4.0)
+
+Enhancements:
+
+* ruby 1.8.7 compatible
+* Ethon.logger
+* Deal with string param/body
+* More documentation
+
+Bugfixes:
+
+* Add multi_cleanup to curl
+
+## 0.3.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.2.0...v0.3.0)
+
+Enhancements:
+
+* New libcurl option proxyport
+* Raise invalid value error when providing a wrong key for sslversion or httpauth
+
+Bugfixes:
+
+* Libcurl option sslversion is handled correct
+
+## 0.2.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.1.0...v0.2.0)
+
+Enhancements:
+
+* GET requests are using custom requests only when there is a request body
+* Easy#on_complete takes multiple callbacks
+* raise Errors::GlobalInit when libcurls global_init failed instead of
+  runtime error
+* raise Errors::InvalidOption if option is invalid
+
+## 0.1.0
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.0.2...v0.1.0)
+
+Enhancements:
+
+* Documentation
+  ( [Alex P](https://github.com/ifesdjeen), [\#13](https://github.com/typhoeus/ethon/issues/13) )
+* New libcurl option dns_cache_timeout
+  ( [Chris Heald](https://github.com/cheald), [\#192](https://github.com/typhoeus/typhoeus/pull/192) )
+
+Bugfixes:
+
+* Libcurl option ssl_verifyhost takes an integer.
+* Add space between header key and value.
+
+## 0.0.2
+
+[Full Changelog](https://github.com/typhoeus/ethon/compare/v0.0.1...v0.0.2)
+
+Bugfixes:
+
+* Add libcurl.so.4 to ffi_lib in order to load correct lib on Debian.
+* Escape zero bytes.
+
+## 0.0.1 Initial version