ory-client 1.1.41 → 1.1.44

data/docs/ProjectApi.md

@@ -9,13 +9,13 @@ All URIs are relative to *https://playground.projects.oryapis.com*
 | [**delete_project_api_key**](ProjectApi.md#delete_project_api_key) | **DELETE** /projects/{project}/tokens/{token_id} | Delete project API token |
 | [**get_active_project_in_console**](ProjectApi.md#get_active_project_in_console) | **GET** /console/active/project | Returns the Ory Network Project selected in the Ory Network Console |
 | [**get_project**](ProjectApi.md#get_project) | **GET** /projects/{project_id} | Get a Project |
-| [**get_project_members**](ProjectApi.md#get_project_members) | **GET** /projects/{project_id}/members | Get all members associated with this project |
+| [**get_project_members**](ProjectApi.md#get_project_members) | **GET** /projects/{project}/members | Get all members associated with this project |
 | [**get_project_metrics**](ProjectApi.md#get_project_metrics) | **GET** /projects/{project_id}/metrics |  |
 | [**list_project_api_keys**](ProjectApi.md#list_project_api_keys) | **GET** /projects/{project}/tokens | List a project's API Tokens |
 | [**list_projects**](ProjectApi.md#list_projects) | **GET** /projects | List All Projects |
 | [**patch_project**](ProjectApi.md#patch_project) | **PATCH** /projects/{project_id} | Patch an Ory Network Project Configuration |
 | [**purge_project**](ProjectApi.md#purge_project) | **DELETE** /projects/{project_id} | Irrecoverably purge a project |
-| [**remove_project_member**](ProjectApi.md#remove_project_member) | **DELETE** /projects/{project_id}/members/{member_id} | Remove a member associated with this project |
+| [**remove_project_member**](ProjectApi.md#remove_project_member) | **DELETE** /projects/{project}/members/{member} | Remove a member associated with this project |
 | [**set_active_project_in_console**](ProjectApi.md#set_active_project_in_console) | **PUT** /console/active/project | Sets the Ory Network Project active in the Ory Network Console |
 | [**set_project**](ProjectApi.md#set_project) | **PUT** /projects/{project_id} | Update an Ory Network Project Configuration |
 
@@ -371,7 +371,7 @@ end
 
 ## get_project_members
 
-> <Array<CloudAccount>> get_project_members(project_id)
+> <Array<CloudAccount>> get_project_members(project)
 
 Get all members associated with this project
 
@@ -389,11 +389,11 @@ OryClient.configure do |config|
 end
 
 api_instance = OryClient::ProjectApi.new
-project_id = 'project_id_example' # String | Project ID  The project's ID.
+project = 'project_example' # String | 
 
 begin
   # Get all members associated with this project
-  result = api_instance.get_project_members(project_id)
+  result = api_instance.get_project_members(project)
   p result
 rescue OryClient::ApiError => e
   puts "Error when calling ProjectApi->get_project_members: #{e}"
@@ -404,12 +404,12 @@ end
 
 This returns an Array which contains the response data, status code and headers.
 
-> <Array(<Array<CloudAccount>>, Integer, Hash)> get_project_members_with_http_info(project_id)
+> <Array(<Array<CloudAccount>>, Integer, Hash)> get_project_members_with_http_info(project)
 
 ```ruby
 begin
   # Get all members associated with this project
-  data, status_code, headers = api_instance.get_project_members_with_http_info(project_id)
+  data, status_code, headers = api_instance.get_project_members_with_http_info(project)
   p status_code # => 2xx
   p headers # => { ... }
   p data # => <Array<CloudAccount>>
@@ -422,7 +422,7 @@ end
 
 | Name | Type | Description | Notes |
 | ---- | ---- | ----------- | ----- |
-| **project_id** | **String** | Project ID  The project&#39;s ID. |  |
+| **project** | **String** |  |  |
 
 ### Return type
 
@@ -793,7 +793,7 @@ nil (empty response body)
 
 ## remove_project_member
 
-> remove_project_member(project_id, member_id)
+> remove_project_member(project, member)
 
 Remove a member associated with this project
 
@@ -811,12 +811,12 @@ OryClient.configure do |config|
 end
 
 api_instance = OryClient::ProjectApi.new
-project_id = 'project_id_example' # String | Project ID  The project's ID.
-member_id = 'member_id_example' # String | Member ID
+project = 'project_example' # String | 
+member = 'member_example' # String | 
 
 begin
   # Remove a member associated with this project
-  api_instance.remove_project_member(project_id, member_id)
+  api_instance.remove_project_member(project, member)
 rescue OryClient::ApiError => e
   puts "Error when calling ProjectApi->remove_project_member: #{e}"
 end
@@ -826,12 +826,12 @@ end
 
 This returns an Array which contains the response data (`nil` in this case), status code and headers.
 
-> <Array(nil, Integer, Hash)> remove_project_member_with_http_info(project_id, member_id)
+> <Array(nil, Integer, Hash)> remove_project_member_with_http_info(project, member)
 
 ```ruby
 begin
   # Remove a member associated with this project
-  data, status_code, headers = api_instance.remove_project_member_with_http_info(project_id, member_id)
+  data, status_code, headers = api_instance.remove_project_member_with_http_info(project, member)
   p status_code # => 2xx
   p headers # => { ... }
   p data # => nil
@@ -844,8 +844,8 @@ end
 
 | Name | Type | Description | Notes |
 | ---- | ---- | ----------- | ----- |
-| **project_id** | **String** | Project ID  The project&#39;s ID. |  |
-| **member_id** | **String** | Member ID |  |
+| **project** | **String** |  |  |
+| **member** | **String** |  |  |
 
 ### Return type
 
@@ -953,7 +953,7 @@ end
 api_instance = OryClient::ProjectApi.new
 project_id = 'project_id_example' # String | Project ID  The project's ID.
 opts = {
-  set_project: OryClient::SetProject.new({name: 'name_example', services: OryClient::ProjectServices.new}) # SetProject | 
+  set_project: OryClient::SetProject.new({cors_admin: OryClient::CORS.new({enabled: false, origins: ['origins_example']}), cors_public: OryClient::CORS.new({enabled: false, origins: ['origins_example']}), name: 'name_example', services: OryClient::ProjectServices.new}) # SetProject | 
 }
 
 begin

data/docs/ProjectBrandingTheme.md

@@ -13,7 +13,7 @@
 | **background_subtle_color** | **String** | BackgroundSubtleColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **background_surface_color** | **String** | BackgroundSurfaceColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **border_default_color** | **String** | BorderDefaultColor is a hex color code used by the Ory Account Experience theme. | [optional] |
-| **created_at** | **Time** | The Customiation Creation Date | [readonly] |
+| **created_at** | **Time** | The Customization Creation Date. | [readonly] |
 | **error_default_color** | **String** | ErrorDefaultColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **error_emphasis_color** | **String** | ErrorEmphasisColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **error_muted_color** | **String** | ErrorMutedColor is a hex color code used by the Ory Account Experience theme. | [optional] |
@@ -34,12 +34,12 @@
 | **logo_url** | **String** | Logo URL Logo can be an https:// or base64:// URL. If the URL is not allowed, the logo will be stored inside the Ory Network storage bucket. | [optional] |
 | **name** | **String** | The customization theme name. |  |
 | **primary_color** | **String** | Primary color is an hsla color value used to derive the other colors from for the Ory Account Experience theme. | [optional] |
-| **project_branding_id** | **String** | The ProjectBranding ID this customization is associated with |  |
+| **project_branding_id** | **String** | The ProjectBranding ID this customization is associated with. |  |
 | **secondary_color** | **String** | Secondary color is a hsla color code used to derive the other colors from for the Ory Account Experience theme. | [optional] |
 | **success_emphasis_color** | **String** | SuccessEmphasisColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **text_default_color** | **String** | TextDefaultColor is a hex color code used by the Ory Account Experience theme. | [optional] |
 | **text_disabled_color** | **String** | TextDisabledColor is a hex color code used by the Ory Account Experience theme. | [optional] |
-| **updated_at** | **Time** | Last Time Branding was Updated | [readonly] |
+| **updated_at** | **Time** | Last Time Branding was Updated. | [readonly] |
 
 ## Example
 

data/docs/RFC6749ErrorJson.md

@@ -0,0 +1,26 @@
+# OryClient::RFC6749ErrorJson
+
+## Properties
+
+| Name | Type | Description | Notes |
+| ---- | ---- | ----------- | ----- |
+| **error** | **String** |  | [optional] |
+| **error_debug** | **String** |  | [optional] |
+| **error_description** | **String** |  | [optional] |
+| **error_hint** | **String** |  | [optional] |
+| **status_code** | **Integer** |  | [optional] |
+
+## Example
+
+```ruby
+require 'ory-client'
+
+instance = OryClient::RFC6749ErrorJson.new(
+  error: null,
+  error_debug: null,
+  error_description: null,
+  error_hint: null,
+  status_code: null
+)
+```
+

data/docs/SetProject.md

@@ -4,6 +4,8 @@
 
 | Name | Type | Description | Notes |
 | ---- | ---- | ----------- | ----- |
+| **cors_admin** | [**CORS**](CORS.md) |  |  |
+| **cors_public** | [**CORS**](CORS.md) |  |  |
 | **name** | **String** | The name of the project. |  |
 | **services** | [**ProjectServices**](ProjectServices.md) |  |  |
 
@@ -13,6 +15,8 @@
 require 'ory-client'
 
 instance = OryClient::SetProject.new(
+  cors_admin: null,
+  cors_public: null,
   name: null,
   services: null
 )

data/docs/VerifiableCredentialPrimingResponse.md

@@ -0,0 +1,32 @@
+# OryClient::VerifiableCredentialPrimingResponse
+
+## Properties
+
+| Name | Type | Description | Notes |
+| ---- | ---- | ----------- | ----- |
+| **c_nonce** | **String** |  | [optional] |
+| **c_nonce_expires_in** | **Integer** |  | [optional] |
+| **error** | **String** |  | [optional] |
+| **error_debug** | **String** |  | [optional] |
+| **error_description** | **String** |  | [optional] |
+| **error_hint** | **String** |  | [optional] |
+| **format** | **String** |  | [optional] |
+| **status_code** | **Integer** |  | [optional] |
+
+## Example
+
+```ruby
+require 'ory-client'
+
+instance = OryClient::VerifiableCredentialPrimingResponse.new(
+  c_nonce: null,
+  c_nonce_expires_in: null,
+  error: null,
+  error_debug: null,
+  error_description: null,
+  error_hint: null,
+  format: null,
+  status_code: null
+)
+```
+

data/docs/VerifiableCredentialProof.md

@@ -0,0 +1,20 @@
+# OryClient::VerifiableCredentialProof
+
+## Properties
+
+| Name | Type | Description | Notes |
+| ---- | ---- | ----------- | ----- |
+| **jwt** | **String** |  | [optional] |
+| **proof_type** | **String** |  | [optional] |
+
+## Example
+
+```ruby
+require 'ory-client'
+
+instance = OryClient::VerifiableCredentialProof.new(
+  jwt: null,
+  proof_type: null
+)
+```
+

data/docs/VerifiableCredentialResponse.md

@@ -0,0 +1,20 @@
+# OryClient::VerifiableCredentialResponse
+
+## Properties
+
+| Name | Type | Description | Notes |
+| ---- | ---- | ----------- | ----- |
+| **credential_draft_00** | **String** |  | [optional] |
+| **format** | **String** |  | [optional] |
+
+## Example
+
+```ruby
+require 'ory-client'
+
+instance = OryClient::VerifiableCredentialResponse.new(
+  credential_draft_00: null,
+  format: null
+)
+```
+

data/lib/ory-client/api/courier_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/frontend_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1
@@ -215,7 +215,7 @@ module OryClient
     end
 
     # Create Registration Flow for Browsers
-    # This endpoint initializes a browser-based user registration flow. This endpoint will set the appropriate cookies and anti-CSRF measures required for browser-based flows.  :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  If this endpoint is opened as a link in the browser, it will be redirected to `selfservice.flows.registration.ui_url` with the flow ID set as the query parameter `?flow=`. If a valid user session exists already, the browser will be redirected to `urls.default_redirect_url`.  If this endpoint is called via an AJAX request, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration!  If this endpoint is called via an AJAX request, the response contains the registration flow without a redirect.  This endpoint is NOT INTENDED for clients that do not have a browser (Chrome, Firefox, ...) as cookies are needed.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
+    # This endpoint initializes a browser-based user registration flow. This endpoint will set the appropriate cookies and anti-CSRF measures required for browser-based flows.  If this endpoint is opened as a link in the browser, it will be redirected to `selfservice.flows.registration.ui_url` with the flow ID set as the query parameter `?flow=`. If a valid user session exists already, the browser will be redirected to `urls.default_redirect_url`.  If this endpoint is called via an AJAX request, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration!  If this endpoint is called via an AJAX request, the response contains the registration flow without a redirect.  This endpoint is NOT INTENDED for clients that do not have a browser (Chrome, Firefox, ...) as cookies are needed.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param [Hash] opts the optional parameters
     # @option opts [String] :return_to The URL to return the browser to after the flow was completed.
     # @option opts [String] :login_challenge Ory OAuth 2.0 Login Challenge.  If set will cooperate with Ory OAuth2 and OpenID to act as an OAuth2 server / OpenID Provider.  The value for this parameter comes from `login_challenge` URL Query parameter sent to your application (e.g. `/registration?login_challenge=abcde`).  This feature is compatible with Ory Hydra when not running on the Ory Network.
@@ -227,7 +227,7 @@ module OryClient
     end
 
     # Create Registration Flow for Browsers
-    # This endpoint initializes a browser-based user registration flow. This endpoint will set the appropriate cookies and anti-CSRF measures required for browser-based flows.  :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  If this endpoint is opened as a link in the browser, it will be redirected to `selfservice.flows.registration.ui_url` with the flow ID set as the query parameter `?flow=`. If a valid user session exists already, the browser will be redirected to `urls.default_redirect_url`.  If this endpoint is called via an AJAX request, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration!  If this endpoint is called via an AJAX request, the response contains the registration flow without a redirect.  This endpoint is NOT INTENDED for clients that do not have a browser (Chrome, Firefox, ...) as cookies are needed.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
+    # This endpoint initializes a browser-based user registration flow. This endpoint will set the appropriate cookies and anti-CSRF measures required for browser-based flows.  If this endpoint is opened as a link in the browser, it will be redirected to `selfservice.flows.registration.ui_url` with the flow ID set as the query parameter `?flow=`. If a valid user session exists already, the browser will be redirected to `urls.default_redirect_url`.  If this endpoint is called via an AJAX request, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration!  If this endpoint is called via an AJAX request, the response contains the registration flow without a redirect.  This endpoint is NOT INTENDED for clients that do not have a browser (Chrome, Firefox, ...) as cookies are needed.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param [Hash] opts the optional parameters
     # @option opts [String] :return_to The URL to return the browser to after the flow was completed.
     # @option opts [String] :login_challenge Ory OAuth 2.0 Login Challenge.  If set will cooperate with Ory OAuth2 and OpenID to act as an OAuth2 server / OpenID Provider.  The value for this parameter comes from `login_challenge` URL Query parameter sent to your application (e.g. `/registration?login_challenge=abcde`).  This feature is compatible with Ory Hydra when not running on the Ory Network.
@@ -1522,7 +1522,7 @@ module OryClient
     end
 
     # Check Who the Current HTTP Session Belongs To
-    # Uses the HTTP Headers in the GET request to determine (e.g. by using checking the cookies) who is authenticated. Returns a session object in the body or 401 if the credentials are invalid or no credentials were sent. When the request it successful it adds the user ID to the 'X-Kratos-Authenticated-Identity-Id' header in the response.  If you call this endpoint from a server-side application, you must forward the HTTP Cookie Header to this endpoint:  ```js pseudo-code example router.get('/protected-endpoint', async function (req, res) { const session = await client.toSession(undefined, req.header('cookie'))  console.log(session) }) ```  When calling this endpoint from a non-browser application (e.g. mobile app) you must include the session token:  ```js pseudo-code example ... const session = await client.toSession(\"the-session-token\")  console.log(session) ```  Depending on your configuration this endpoint might return a 403 status code if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor or change the configuration.  This endpoint is useful for:  AJAX calls. Remember to send credentials and set up CORS correctly! Reverse proxies and API Gateways Server-side calls - use the `X-Session-Token` header!  This endpoint authenticates users by checking:  if the `Cookie` HTTP header was set containing an Ory Kratos Session Cookie; if the `Authorization: bearer <ory-session-token>` HTTP header was set with a valid Ory Kratos Session Token; if the `X-Session-Token` HTTP header was set with a valid Ory Kratos Session Token.  If none of these headers are set or the cooke or token are invalid, the endpoint returns a HTTP 401 status code.  As explained above, this request may fail due to several reasons. The `error.id` can be one of:  `session_inactive`: No active session was found in the request (e.g. no Ory Session Cookie / Ory Session Token). `session_aal2_required`: An active session was found but it does not fulfil the Authenticator Assurance Level, implying that the session must (e.g.) authenticate the second factor.
+    # Uses the HTTP Headers in the GET request to determine (e.g. by using checking the cookies) who is authenticated. Returns a session object in the body or 401 if the credentials are invalid or no credentials were sent. When the request it successful it adds the user ID to the 'X-Kratos-Authenticated-Identity-Id' header in the response.  If you call this endpoint from a server-side application, you must forward the HTTP Cookie Header to this endpoint:  ```js pseudo-code example router.get('/protected-endpoint', async function (req, res) { const session = await client.toSession(undefined, req.header('cookie'))  console.log(session) }) ```  When calling this endpoint from a non-browser application (e.g. mobile app) you must include the session token:  ```js pseudo-code example ... const session = await client.toSession(\"the-session-token\")  console.log(session) ```  Depending on your configuration this endpoint might return a 403 status code if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor or change the configuration.  This endpoint is useful for:  AJAX calls. Remember to send credentials and set up CORS correctly! Reverse proxies and API Gateways Server-side calls - use the `X-Session-Token` header!  This endpoint authenticates users by checking:  if the `Cookie` HTTP header was set containing an Ory Kratos Session Cookie; if the `Authorization: bearer <ory-session-token>` HTTP header was set with a valid Ory Kratos Session Token; if the `X-Session-Token` HTTP header was set with a valid Ory Kratos Session Token.  If none of these headers are set or the cookie or token are invalid, the endpoint returns a HTTP 401 status code.  As explained above, this request may fail due to several reasons. The `error.id` can be one of:  `session_inactive`: No active session was found in the request (e.g. no Ory Session Cookie / Ory Session Token). `session_aal2_required`: An active session was found but it does not fulfil the Authenticator Assurance Level, implying that the session must (e.g.) authenticate the second factor.
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token Set the Session Token when calling from non-browser clients. A session token has a format of &#x60;MP2YWEMeM8MxjkGKpH4dqOQ4Q4DlSPaj&#x60;.
     # @option opts [String] :cookie Set the Cookie Header. This is especially useful when calling this endpoint from a server-side application. In that scenario you must include the HTTP Cookie Header which originally was included in the request to your server. An example of a session in the HTTP Cookie Header is: &#x60;ory_kratos_session&#x3D;a19iOVAbdzdgl70Rq1QZmrKmcjDtdsviCTZx7m9a9yHIUS8Wa9T7hvqyGTsLHi6Qifn2WUfpAKx9DWp0SJGleIn9vh2YF4A16id93kXFTgIgmwIOvbVAScyrx7yVl6bPZnCx27ec4WQDtaTewC1CpgudeDV2jQQnSaCP6ny3xa8qLH-QUgYqdQuoA_LF1phxgRCUfIrCLQOkolX5nv3ze_f&#x3D;&#x3D;&#x60;.  It is ok if more than one cookie are included here as all other cookies will be ignored.
@@ -1533,7 +1533,7 @@ module OryClient
     end
 
     # Check Who the Current HTTP Session Belongs To
-    # Uses the HTTP Headers in the GET request to determine (e.g. by using checking the cookies) who is authenticated. Returns a session object in the body or 401 if the credentials are invalid or no credentials were sent. When the request it successful it adds the user ID to the &#39;X-Kratos-Authenticated-Identity-Id&#39; header in the response.  If you call this endpoint from a server-side application, you must forward the HTTP Cookie Header to this endpoint:  &#x60;&#x60;&#x60;js pseudo-code example router.get(&#39;/protected-endpoint&#39;, async function (req, res) { const session &#x3D; await client.toSession(undefined, req.header(&#39;cookie&#39;))  console.log(session) }) &#x60;&#x60;&#x60;  When calling this endpoint from a non-browser application (e.g. mobile app) you must include the session token:  &#x60;&#x60;&#x60;js pseudo-code example ... const session &#x3D; await client.toSession(\&quot;the-session-token\&quot;)  console.log(session) &#x60;&#x60;&#x60;  Depending on your configuration this endpoint might return a 403 status code if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor or change the configuration.  This endpoint is useful for:  AJAX calls. Remember to send credentials and set up CORS correctly! Reverse proxies and API Gateways Server-side calls - use the &#x60;X-Session-Token&#x60; header!  This endpoint authenticates users by checking:  if the &#x60;Cookie&#x60; HTTP header was set containing an Ory Kratos Session Cookie; if the &#x60;Authorization: bearer &lt;ory-session-token&gt;&#x60; HTTP header was set with a valid Ory Kratos Session Token; if the &#x60;X-Session-Token&#x60; HTTP header was set with a valid Ory Kratos Session Token.  If none of these headers are set or the cooke or token are invalid, the endpoint returns a HTTP 401 status code.  As explained above, this request may fail due to several reasons. The &#x60;error.id&#x60; can be one of:  &#x60;session_inactive&#x60;: No active session was found in the request (e.g. no Ory Session Cookie / Ory Session Token). &#x60;session_aal2_required&#x60;: An active session was found but it does not fulfil the Authenticator Assurance Level, implying that the session must (e.g.) authenticate the second factor.
+    # Uses the HTTP Headers in the GET request to determine (e.g. by using checking the cookies) who is authenticated. Returns a session object in the body or 401 if the credentials are invalid or no credentials were sent. When the request it successful it adds the user ID to the &#39;X-Kratos-Authenticated-Identity-Id&#39; header in the response.  If you call this endpoint from a server-side application, you must forward the HTTP Cookie Header to this endpoint:  &#x60;&#x60;&#x60;js pseudo-code example router.get(&#39;/protected-endpoint&#39;, async function (req, res) { const session &#x3D; await client.toSession(undefined, req.header(&#39;cookie&#39;))  console.log(session) }) &#x60;&#x60;&#x60;  When calling this endpoint from a non-browser application (e.g. mobile app) you must include the session token:  &#x60;&#x60;&#x60;js pseudo-code example ... const session &#x3D; await client.toSession(\&quot;the-session-token\&quot;)  console.log(session) &#x60;&#x60;&#x60;  Depending on your configuration this endpoint might return a 403 status code if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor or change the configuration.  This endpoint is useful for:  AJAX calls. Remember to send credentials and set up CORS correctly! Reverse proxies and API Gateways Server-side calls - use the &#x60;X-Session-Token&#x60; header!  This endpoint authenticates users by checking:  if the &#x60;Cookie&#x60; HTTP header was set containing an Ory Kratos Session Cookie; if the &#x60;Authorization: bearer &lt;ory-session-token&gt;&#x60; HTTP header was set with a valid Ory Kratos Session Token; if the &#x60;X-Session-Token&#x60; HTTP header was set with a valid Ory Kratos Session Token.  If none of these headers are set or the cookie or token are invalid, the endpoint returns a HTTP 401 status code.  As explained above, this request may fail due to several reasons. The &#x60;error.id&#x60; can be one of:  &#x60;session_inactive&#x60;: No active session was found in the request (e.g. no Ory Session Cookie / Ory Session Token). &#x60;session_aal2_required&#x60;: An active session was found but it does not fulfil the Authenticator Assurance Level, implying that the session must (e.g.) authenticate the second factor.
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token Set the Session Token when calling from non-browser clients. A session token has a format of &#x60;MP2YWEMeM8MxjkGKpH4dqOQ4Q4DlSPaj&#x60;.
     # @option opts [String] :cookie Set the Cookie Header. This is especially useful when calling this endpoint from a server-side application. In that scenario you must include the HTTP Cookie Header which originally was included in the request to your server. An example of a session in the HTTP Cookie Header is: &#x60;ory_kratos_session&#x3D;a19iOVAbdzdgl70Rq1QZmrKmcjDtdsviCTZx7m9a9yHIUS8Wa9T7hvqyGTsLHi6Qifn2WUfpAKx9DWp0SJGleIn9vh2YF4A16id93kXFTgIgmwIOvbVAScyrx7yVl6bPZnCx27ec4WQDtaTewC1CpgudeDV2jQQnSaCP6ny3xa8qLH-QUgYqdQuoA_LF1phxgRCUfIrCLQOkolX5nv3ze_f&#x3D;&#x3D;&#x60;.  It is ok if more than one cookie are included here as all other cookies will be ignored.
@@ -1585,7 +1585,7 @@ module OryClient
     end
 
     # Submit a Login Flow
-    # :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect `application/json` to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a `use_flow_id` parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of `application/x-www-form-urlencoded` or `application/json` to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the `return_to` value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of `application/json` will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with `Accept: application/json` in the header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
+    # Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect `application/json` to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a `use_flow_id` parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of `application/x-www-form-urlencoded` or `application/json` to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the `return_to` value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of `application/json` will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with `Accept: application/json` in the header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Login Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/login?flow&#x3D;abcde&#x60;).
     # @param update_login_flow_body [UpdateLoginFlowBody] 
     # @param [Hash] opts the optional parameters
@@ -1598,7 +1598,7 @@ module OryClient
     end
 
     # Submit a Login Flow
-    # :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect &#x60;application/json&#x60; to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a &#x60;use_flow_id&#x60; parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of &#x60;application/x-www-form-urlencoded&#x60; or &#x60;application/json&#x60; to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the &#x60;return_to&#x60; value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of &#x60;application/json&#x60; will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a &#x60;Set-Cookie&#x60; header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with &#x60;Accept: application/json&#x60; in the header, the response contains the flow without a redirect. In the case of an error, the &#x60;error.id&#x60; of the JSON response body can be one of:  &#x60;session_already_available&#x60;: The user is already signed in. &#x60;security_csrf_violation&#x60;: Unable to fetch the flow because a CSRF violation occurred. &#x60;security_identity_mismatch&#x60;: The requested &#x60;?return_to&#x60; address is not allowed to be used. Adjust this in the configuration! &#x60;browser_location_change_required&#x60;: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
+    # Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect &#x60;application/json&#x60; to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a &#x60;use_flow_id&#x60; parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of &#x60;application/x-www-form-urlencoded&#x60; or &#x60;application/json&#x60; to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the &#x60;return_to&#x60; value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of &#x60;application/json&#x60; will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a &#x60;Set-Cookie&#x60; header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with &#x60;Accept: application/json&#x60; in the header, the response contains the flow without a redirect. In the case of an error, the &#x60;error.id&#x60; of the JSON response body can be one of:  &#x60;session_already_available&#x60;: The user is already signed in. &#x60;security_csrf_violation&#x60;: Unable to fetch the flow because a CSRF violation occurred. &#x60;security_identity_mismatch&#x60;: The requested &#x60;?return_to&#x60; address is not allowed to be used. Adjust this in the configuration! &#x60;browser_location_change_required&#x60;: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Login Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/login?flow&#x3D;abcde&#x60;).
     # @param update_login_flow_body [UpdateLoginFlowBody] 
     # @param [Hash] opts the optional parameters

data/lib/ory-client/api/identity_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/jwk_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/metadata_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/o_auth2_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/oidc_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1
@@ -87,6 +87,70 @@ module OryClient
       return data, status_code, headers
     end
 
+    # Issues a Verifiable Credential
+    # This endpoint creates a verifiable credential that attests that the user authenticated with the provided access token owns a certain public/private key pair.  More information can be found at https://openid.net/specs/openid-connect-userinfo-vc-1_0.html.
+    # @param [Hash] opts the optional parameters
+    # @option opts [CreateVerifiableCredentialRequestBody] :create_verifiable_credential_request_body 
+    # @return [VerifiableCredentialResponse]
+    def create_verifiable_credential(opts = {})
+      data, _status_code, _headers = create_verifiable_credential_with_http_info(opts)
+      data
+    end
+
+    # Issues a Verifiable Credential
+    # This endpoint creates a verifiable credential that attests that the user authenticated with the provided access token owns a certain public/private key pair.  More information can be found at https://openid.net/specs/openid-connect-userinfo-vc-1_0.html.
+    # @param [Hash] opts the optional parameters
+    # @option opts [CreateVerifiableCredentialRequestBody] :create_verifiable_credential_request_body 
+    # @return [Array<(VerifiableCredentialResponse, Integer, Hash)>] VerifiableCredentialResponse data, response status code and response headers
+    def create_verifiable_credential_with_http_info(opts = {})
+      if @api_client.config.debugging
+        @api_client.config.logger.debug 'Calling API: OidcApi.create_verifiable_credential ...'
+      end
+      # resource path
+      local_var_path = '/credentials'
+
+      # query parameters
+      query_params = opts[:query_params] || {}
+
+      # header parameters
+      header_params = opts[:header_params] || {}
+      # HTTP header 'Accept' (if needed)
+      header_params['Accept'] = @api_client.select_header_accept(['application/json'])
+      # HTTP header 'Content-Type'
+      content_type = @api_client.select_header_content_type(['application/json'])
+      if !content_type.nil?
+          header_params['Content-Type'] = content_type
+      end
+
+      # form parameters
+      form_params = opts[:form_params] || {}
+
+      # http body (model)
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'create_verifiable_credential_request_body'])
+
+      # return_type
+      return_type = opts[:debug_return_type] || 'VerifiableCredentialResponse'
+
+      # auth_names
+      auth_names = opts[:debug_auth_names] || []
+
+      new_options = opts.merge(
+        :operation => :"OidcApi.create_verifiable_credential",
+        :header_params => header_params,
+        :query_params => query_params,
+        :form_params => form_params,
+        :body => post_body,
+        :auth_names => auth_names,
+        :return_type => return_type
+      )
+
+      data, status_code, headers = @api_client.call_api(:POST, local_var_path, new_options)
+      if @api_client.config.debugging
+        @api_client.config.logger.debug "API called: OidcApi#create_verifiable_credential\nData: #{data.inspect}\nStatus code: #{status_code}\nHeaders: #{headers}"
+      end
+      return data, status_code, headers
+    end
+
     # Delete OAuth 2.0 Client using the OpenID Dynamic Client Registration Management Protocol
     # This endpoint behaves like the administrative counterpart (`deleteOAuth2Client`) but is capable of facing the public internet directly and can be used in self-service. It implements the OpenID Connect Dynamic Client Registration Protocol. This feature needs to be enabled in the configuration. This endpoint is disabled by default. It can be enabled by an administrator.  To use this endpoint, you will need to present the client's authentication credentials. If the OAuth2 Client uses the Token Endpoint Authentication Method `client_secret_post`, you need to present the client secret in the URL query. If it uses `client_secret_basic`, present the Client ID and the Client Secret in the Authorization header.  OAuth 2.0 clients are used to perform OAuth 2.0 and OpenID Connect flows. Usually, OAuth 2.0 clients are generated for applications which want to consume your OAuth 2.0 or OpenID Connect capabilities.
     # @param id [String] The id of the OAuth 2.0 Client.

data/lib/ory-client/api/permission_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1

data/lib/ory-client/api/project_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1
@@ -344,29 +344,29 @@ module OryClient
 
     # Get all members associated with this project
     # This endpoint requires the user to be a member of the project with the role `OWNER` or `DEVELOPER`.
-    # @param project_id [String] Project ID  The project's ID.
+    # @param project [String] 
     # @param [Hash] opts the optional parameters
     # @return [Array<CloudAccount>]
-    def get_project_members(project_id, opts = {})
-      data, _status_code, _headers = get_project_members_with_http_info(project_id, opts)
+    def get_project_members(project, opts = {})
+      data, _status_code, _headers = get_project_members_with_http_info(project, opts)
       data
     end
 
     # Get all members associated with this project
     # This endpoint requires the user to be a member of the project with the role &#x60;OWNER&#x60; or &#x60;DEVELOPER&#x60;.
-    # @param project_id [String] Project ID  The project&#39;s ID.
+    # @param project [String] 
     # @param [Hash] opts the optional parameters
     # @return [Array<(Array<CloudAccount>, Integer, Hash)>] Array<CloudAccount> data, response status code and response headers
-    def get_project_members_with_http_info(project_id, opts = {})
+    def get_project_members_with_http_info(project, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: ProjectApi.get_project_members ...'
       end
-      # verify the required parameter 'project_id' is set
-      if @api_client.config.client_side_validation && project_id.nil?
-        fail ArgumentError, "Missing the required parameter 'project_id' when calling ProjectApi.get_project_members"
+      # verify the required parameter 'project' is set
+      if @api_client.config.client_side_validation && project.nil?
+        fail ArgumentError, "Missing the required parameter 'project' when calling ProjectApi.get_project_members"
       end
       # resource path
-      local_var_path = '/projects/{project_id}/members'.sub('{' + 'project_id' + '}', CGI.escape(project_id.to_s))
+      local_var_path = '/projects/{project}/members'.sub('{' + 'project' + '}', CGI.escape(project.to_s))
 
       # query parameters
       query_params = opts[:query_params] || {}
@@ -754,35 +754,35 @@ module OryClient
 
     # Remove a member associated with this project
     # This also sets their invite status to `REMOVED`. This endpoint requires the user to be a member of the project with the role `OWNER`.
-    # @param project_id [String] Project ID  The project&#39;s ID.
-    # @param member_id [String] Member ID
+    # @param project [String] 
+    # @param member [String] 
     # @param [Hash] opts the optional parameters
     # @return [nil]
-    def remove_project_member(project_id, member_id, opts = {})
-      remove_project_member_with_http_info(project_id, member_id, opts)
+    def remove_project_member(project, member, opts = {})
+      remove_project_member_with_http_info(project, member, opts)
       nil
     end
 
     # Remove a member associated with this project
     # This also sets their invite status to &#x60;REMOVED&#x60;. This endpoint requires the user to be a member of the project with the role &#x60;OWNER&#x60;.
-    # @param project_id [String] Project ID  The project&#39;s ID.
-    # @param member_id [String] Member ID
+    # @param project [String] 
+    # @param member [String] 
     # @param [Hash] opts the optional parameters
     # @return [Array<(nil, Integer, Hash)>] nil, response status code and response headers
-    def remove_project_member_with_http_info(project_id, member_id, opts = {})
+    def remove_project_member_with_http_info(project, member, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: ProjectApi.remove_project_member ...'
       end
-      # verify the required parameter 'project_id' is set
-      if @api_client.config.client_side_validation && project_id.nil?
-        fail ArgumentError, "Missing the required parameter 'project_id' when calling ProjectApi.remove_project_member"
+      # verify the required parameter 'project' is set
+      if @api_client.config.client_side_validation && project.nil?
+        fail ArgumentError, "Missing the required parameter 'project' when calling ProjectApi.remove_project_member"
       end
-      # verify the required parameter 'member_id' is set
-      if @api_client.config.client_side_validation && member_id.nil?
-        fail ArgumentError, "Missing the required parameter 'member_id' when calling ProjectApi.remove_project_member"
+      # verify the required parameter 'member' is set
+      if @api_client.config.client_side_validation && member.nil?
+        fail ArgumentError, "Missing the required parameter 'member' when calling ProjectApi.remove_project_member"
       end
       # resource path
-      local_var_path = '/projects/{project_id}/members/{member_id}'.sub('{' + 'project_id' + '}', CGI.escape(project_id.to_s)).sub('{' + 'member_id' + '}', CGI.escape(member_id.to_s))
+      local_var_path = '/projects/{project}/members/{member}'.sub('{' + 'project' + '}', CGI.escape(project.to_s)).sub('{' + 'member' + '}', CGI.escape(member.to_s))
 
       # query parameters
       query_params = opts[:query_params] || {}

data/lib/ory-client/api/relationship_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v1.1.41
+The version of the OpenAPI document: v1.1.44
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 6.0.1