ory-client 0.0.1.alpha43 → 0.0.1.alpha47

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -305,8 +305,8 @@ am__recursive_targets = \
   $(am__extra_recursive_targets)
 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	cscope distdir distdir-am dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
-	fficonfig.h.in
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)fficonfig.h.in
 # Read a list of newline-separated strings from the standard input,
 # and print each of them once, without duplicates.  Input order is
 # *not* preserved.
@@ -368,8 +368,6 @@ am__relativize = \
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 DIST_TARGETS = dist-gzip
-# Exists only to be overridden by the user if desired.
-AM_DISTCHECK_DVI_TARGET = dvi
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -1554,10 +1552,6 @@ dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__post_remove_distdir)
 
-dist-zstd: distdir
-	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
-	$(am__post_remove_distdir)
-
 dist-tarZ: distdir
 	@echo WARNING: "Support for distribution archives compressed with" \
 		       "legacy program 'compress' is deprecated." >&2
@@ -1600,8 +1594,6 @@ distcheck: dist
 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
-	*.tar.zst*) \
-	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
@@ -1617,7 +1609,7 @@ distcheck: dist
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
@@ -2030,21 +2022,20 @@ uninstall-am: uninstall-pkgconfigDATA uninstall-toolexeclibLTLIBRARIES
 	clean-generic clean-libtool clean-noinstLTLIBRARIES \
 	clean-toolexeclibLTLIBRARIES cscope cscopelist-am ctags \
 	ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
-	dist-lzip dist-shar dist-tarZ dist-xz dist-zip dist-zstd \
-	distcheck distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-pkgconfigDATA \
-	install-ps install-ps-am install-strip \
-	install-toolexeclibLTLIBRARIES installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-am uninstall uninstall-am uninstall-pkgconfigDATA \
-	uninstall-toolexeclibLTLIBRARIES
+	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip install-toolexeclibLTLIBRARIES \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-pkgconfigDATA uninstall-toolexeclibLTLIBRARIES
 
 .PRECIOUS: Makefile
 

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/configure

@@ -3094,7 +3094,12 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 if test x"${MISSING+set}" != xset; then
-  MISSING="\${SHELL} '$am_aux_dir/missing'"
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
 fi
 # Use eval to expand $SHELL
 if eval "$MISSING --is-lightweight"; then
@@ -21274,9 +21279,7 @@ $as_echo X/"$am_mf" |
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Something went wrong bootstrapping makefile fragments
-    for automatic dependency tracking.  If GNU make was not used, consider
-    re-running the configure script with MAKE=\"gmake\" (or whatever is
-    necessary).  You can also try re-running configure with the
+    for automatic dependency tracking.  Try re-running configure with the
     '--disable-dependency-tracking' option to at least be able to build
     the package (albeit without support for automatic dependency tracking).
 See \`config.log' for more details" "$LINENO" 5; }
@@ -21303,6 +21306,7 @@ See \`config.log' for more details" "$LINENO" 5; }
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
 # Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 
 # Provide generalized library-building support services.

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/doc/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/include/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2020-11-14.01; # UTC
+scriptversion=2018-03-11.20; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -69,11 +69,6 @@ posix_mkdir=
 # Desired mode of installed file.
 mode=0755
 
-# Create dirs (including intermediate dirs) using mode 755.
-# This is like GNU 'install' as of coreutils 8.32 (2020).
-mkdir_umask=22
-
-backupsuffix=
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
@@ -104,28 +99,18 @@ Options:
      --version  display version info and exit.
 
   -c            (ignored)
-  -C            install only if different (preserve data modification time)
+  -C            install only if different (preserve the last data modification time)
   -d            create directories instead of installing files.
   -g GROUP      $chgrpprog installed files to GROUP.
   -m MODE       $chmodprog installed files to MODE.
   -o USER       $chownprog installed files to USER.
-  -p            pass -p to $cpprog.
   -s            $stripprog installed files.
-  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
   -t DIRECTORY  install into DIRECTORY.
   -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
   CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
   RMPROG STRIPPROG
-
-By default, rm is invoked with -f; when overridden with RMPROG,
-it's up to you to specify -f if you want it.
-
-If -S is not specified, no backups are attempted.
-
-Email bug reports to bug-automake@gnu.org.
-Automake home page: https://www.gnu.org/software/automake/
 "
 
 while test $# -ne 0; do
@@ -152,13 +137,8 @@ while test $# -ne 0; do
     -o) chowncmd="$chownprog $2"
         shift;;
 
-    -p) cpprog="$cpprog -p";;
-
     -s) stripcmd=$stripprog;;
 
-    -S) backupsuffix="$2"
-        shift;;
-
     -t)
         is_target_a_directory=always
         dst_arg=$2
@@ -275,10 +255,6 @@ do
     dstdir=$dst
     test -d "$dstdir"
     dstdir_status=$?
-    # Don't chown directories that already exist.
-    if test $dstdir_status = 0; then
-      chowncmd=""
-    fi
   else
 
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
@@ -325,6 +301,22 @@ do
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
         # With -d, create the new directory with the user-specified mode.
         # Otherwise, rely on $mkdir_umask.
         if test -n "$dir_arg"; then
@@ -334,49 +326,52 @@ do
         fi
 
         posix_mkdir=false
-	# The $RANDOM variable is not portable (e.g., dash).  Use it
-	# here however when possible just to lower collision chance.
-	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
-	trap '
-	  ret=$?
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
-	  exit $ret
-	' 0
-
-	# Because "mkdir -p" follows existing symlinks and we likely work
-	# directly in world-writeable /tmp, make sure that the '$tmpdir'
-	# directory is successfully created first before we actually test
-	# 'mkdir -p'.
-	if (umask $mkdir_umask &&
-	    $mkdirprog $mkdir_mode "$tmpdir" &&
-	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-	then
-	  if test -z "$dir_arg" || {
-	       # Check for POSIX incompatibilities with -m.
-	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-	       # other-writable bit of parent directory when it shouldn't.
-	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-	       test_tmpdir="$tmpdir/a"
-	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-	       case $ls_ld_tmpdir in
-		 d????-?r-*) different_mode=700;;
-		 d????-?--*) different_mode=755;;
-		 *) false;;
-	       esac &&
-	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-	       }
-	     }
-	  then posix_mkdir=:
-	  fi
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-	else
-	  # Remove any dirs left behind by ancient mkdir implementations.
-	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-	fi
-	trap '' 0;;
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
+            # here however when possible just to lower collision chance.
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            # Because "mkdir -p" follows existing symlinks and we likely work
+            # directly in world-writeable /tmp, make sure that the '$tmpdir'
+            # directory is successfully created first before we actually test
+            # 'mkdir -p' feature.
+            if (umask $mkdir_umask &&
+                $mkdirprog $mkdir_mode "$tmpdir" &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   test_tmpdir="$tmpdir/a"
+                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
@@ -387,7 +382,7 @@ do
     then :
     else
 
-      # mkdir does not conform to POSIX,
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
       # or it failed possibly due to a race condition.  Create the
       # directory the slow way, step by step, checking for races as we go.
 
@@ -416,7 +411,7 @@ do
           prefixes=
         else
           if $posix_mkdir; then
-            (umask $mkdir_umask &&
+            (umask=$mkdir_umask &&
              $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
             # Don't fail if two instances are running concurrently.
             test -d "$prefix" || exit 1
@@ -456,18 +451,7 @@ do
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 
     # Copy the file name to the temp name.
-    (umask $cp_umask &&
-     { test -z "$stripcmd" || {
-	 # Create $dsttmp read-write so that cp doesn't create it read-only,
-	 # which would cause strip to fail.
-	 if test -z "$doit"; then
-	   : >"$dsttmp" # No need to fork-exec 'touch'.
-	 else
-	   $doit touch "$dsttmp"
-	 fi
-       }
-     } &&
-     $doit_exec $cpprog "$src" "$dsttmp") &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -493,13 +477,6 @@ do
     then
       rm -f "$dsttmp"
     else
-      # If $backupsuffix is set, and the file being installed
-      # already exists, attempt a backup.  Don't worry if it fails,
-      # e.g., if mv doesn't support -f.
-      if test -n "$backupsuffix" && test -f "$dst"; then
-        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
-      fi
-
       # Rename the file to the real destination.
       $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
 
@@ -514,9 +491,9 @@ do
         # file should still install successfully.
         {
           test ! -f "$dst" ||
-          $doit $rmcmd "$dst" 2>/dev/null ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
           { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
           } ||
           { echo "$0: cannot unlink or rename $dst" >&2
             (exit 1); exit 1

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/ltmain.sh

@@ -31,7 +31,7 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4.6 Debian-2.4.6-15"
+VERSION="2.4.6 Debian-2.4.6-14"
 package_revision=2.4.6
 
 
@@ -2141,7 +2141,7 @@ include the following information:
        compiler:       $LTCC
        compiler flags: $LTCFLAGS
        linker:         $LD (gnu? $with_gnu_ld)
-       version:        $progname $scriptversion Debian-2.4.6-15
+       version:        $progname $scriptversion Debian-2.4.6-14
        automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
        autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
 

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/man/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

data/vendor/bundle/ruby/2.5.0/gems/{ffi-1.15.4 → ffi-1.15.5}/ext/ffi_c/libffi/missing

@@ -3,7 +3,7 @@
 
 scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1996-2020 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify