ory-client 0.0.1.alpha179 → 0.0.1.alpha180

data/lib/ory-client/api/v0alpha2_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0
@@ -2546,25 +2546,25 @@ module OryClient
     # Submit a Login Flow
     # :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect `application/json` to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a `use_flow_id` parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of `application/x-www-form-urlencoded` or `application/json` to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the `return_to` value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of `application/json` will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with `Accept: application/json` in the header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Login Flow ID  The value for this parameter comes from `flow` URL Query parameter sent to your application (e.g. `/login?flow=abcde`).
+    # @param submit_self_service_login_flow_body [SubmitSelfServiceLoginFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token The Session Token of the Identity performing the settings flow.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceLoginFlowBody] :submit_self_service_login_flow_body 
     # @return [SuccessfulSelfServiceLoginWithoutBrowser]
-    def submit_self_service_login_flow(flow, opts = {})
-      data, _status_code, _headers = submit_self_service_login_flow_with_http_info(flow, opts)
+    def submit_self_service_login_flow(flow, submit_self_service_login_flow_body, opts = {})
+      data, _status_code, _headers = submit_self_service_login_flow_with_http_info(flow, submit_self_service_login_flow_body, opts)
       data
     end
 
     # Submit a Login Flow
     # :::info  This endpoint is EXPERIMENTAL and subject to potential breaking changes in the future.  :::  Use this endpoint to complete a login flow. This endpoint behaves differently for API and browser flows.  API flows expect `application/json` to be sent in the body and responds with HTTP 200 and a application/json body with the session token on success; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a `use_flow_id` parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of `application/x-www-form-urlencoded` or `application/json` to be sent in the body and respond with a HTTP 303 redirect to the post/after login URL or the `return_to` value if it was set and if the login succeeded; a HTTP 303 redirect to the login UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of `application/json` will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with `Accept: application/json` in the header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Login Flow ID  The value for this parameter comes from `flow` URL Query parameter sent to your application (e.g. `/login?flow=abcde`).
+    # @param submit_self_service_login_flow_body [SubmitSelfServiceLoginFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token The Session Token of the Identity performing the settings flow.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceLoginFlowBody] :submit_self_service_login_flow_body 
     # @return [Array<(SuccessfulSelfServiceLoginWithoutBrowser, Integer, Hash)>] SuccessfulSelfServiceLoginWithoutBrowser data, response status code and response headers
-    def submit_self_service_login_flow_with_http_info(flow, opts = {})
+    def submit_self_service_login_flow_with_http_info(flow, submit_self_service_login_flow_body, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: V0alpha2Api.submit_self_service_login_flow ...'
       end
@@ -2572,6 +2572,10 @@ module OryClient
       if @api_client.config.client_side_validation && flow.nil?
         fail ArgumentError, "Missing the required parameter 'flow' when calling V0alpha2Api.submit_self_service_login_flow"
       end
+      # verify the required parameter 'submit_self_service_login_flow_body' is set
+      if @api_client.config.client_side_validation && submit_self_service_login_flow_body.nil?
+        fail ArgumentError, "Missing the required parameter 'submit_self_service_login_flow_body' when calling V0alpha2Api.submit_self_service_login_flow"
+      end
       # resource path
       local_var_path = '/self-service/login'
 
@@ -2595,7 +2599,7 @@ module OryClient
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'submit_self_service_login_flow_body'])
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(submit_self_service_login_flow_body)
 
       # return_type
       return_type = opts[:debug_return_type] || 'SuccessfulSelfServiceLoginWithoutBrowser'
@@ -2754,25 +2758,25 @@ module OryClient
     # Complete Recovery Flow
     # Use this endpoint to complete a recovery flow. This endpoint behaves differently for API and browser flows and has several states:  `choose_method` expects `flow` (in the URL query) and `email` (in the body) to be sent and works with API- and Browser-initiated flows. For API clients and Browser clients with HTTP Header `Accept: application/json` it either returns a HTTP 200 OK when the form is valid and HTTP 400 OK when the form is invalid. and a HTTP 303 See Other redirect with a fresh recovery flow if the flow was otherwise invalid (e.g. expired). For Browser clients without HTTP Header `Accept` or with `Accept: text/*` it returns a HTTP 303 See Other redirect to the Recovery UI URL with the Recovery Flow ID appended. `sent_email` is the success state after `choose_method` for the `link` method and allows the user to request another recovery email. It works for both API and Browser-initiated flows and returns the same responses as the flow in `choose_method` state. `passed_challenge` expects a `token` to be sent in the URL query and given the nature of the flow (\"sending a recovery link\") does not have any API capabilities. The server responds with a HTTP 303 See Other redirect either to the Settings UI URL (if the link was valid) and instructs the user to update their password, or a redirect to the Recover UI URL with a new Recovery Flow ID which contains an error message that the recovery link was invalid.  More information can be found at [Ory Kratos Account Recovery Documentation](../self-service/flows/account-recovery).
     # @param flow [String] The Recovery Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/recovery?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_recovery_flow_body [SubmitSelfServiceRecoveryFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :token Recovery Token  The recovery token which completes the recovery request. If the token is invalid (e.g. expired) an error will be shown to the end-user.  This parameter is usually set in a link and not used by any direct API call.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceRecoveryFlowBody] :submit_self_service_recovery_flow_body 
     # @return [SelfServiceRecoveryFlow]
-    def submit_self_service_recovery_flow(flow, opts = {})
-      data, _status_code, _headers = submit_self_service_recovery_flow_with_http_info(flow, opts)
+    def submit_self_service_recovery_flow(flow, submit_self_service_recovery_flow_body, opts = {})
+      data, _status_code, _headers = submit_self_service_recovery_flow_with_http_info(flow, submit_self_service_recovery_flow_body, opts)
       data
     end
 
     # Complete Recovery Flow
     # Use this endpoint to complete a recovery flow. This endpoint behaves differently for API and browser flows and has several states:  &#x60;choose_method&#x60; expects &#x60;flow&#x60; (in the URL query) and &#x60;email&#x60; (in the body) to be sent and works with API- and Browser-initiated flows. For API clients and Browser clients with HTTP Header &#x60;Accept: application/json&#x60; it either returns a HTTP 200 OK when the form is valid and HTTP 400 OK when the form is invalid. and a HTTP 303 See Other redirect with a fresh recovery flow if the flow was otherwise invalid (e.g. expired). For Browser clients without HTTP Header &#x60;Accept&#x60; or with &#x60;Accept: text/*&#x60; it returns a HTTP 303 See Other redirect to the Recovery UI URL with the Recovery Flow ID appended. &#x60;sent_email&#x60; is the success state after &#x60;choose_method&#x60; for the &#x60;link&#x60; method and allows the user to request another recovery email. It works for both API and Browser-initiated flows and returns the same responses as the flow in &#x60;choose_method&#x60; state. &#x60;passed_challenge&#x60; expects a &#x60;token&#x60; to be sent in the URL query and given the nature of the flow (\&quot;sending a recovery link\&quot;) does not have any API capabilities. The server responds with a HTTP 303 See Other redirect either to the Settings UI URL (if the link was valid) and instructs the user to update their password, or a redirect to the Recover UI URL with a new Recovery Flow ID which contains an error message that the recovery link was invalid.  More information can be found at [Ory Kratos Account Recovery Documentation](../self-service/flows/account-recovery).
     # @param flow [String] The Recovery Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/recovery?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_recovery_flow_body [SubmitSelfServiceRecoveryFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :token Recovery Token  The recovery token which completes the recovery request. If the token is invalid (e.g. expired) an error will be shown to the end-user.  This parameter is usually set in a link and not used by any direct API call.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceRecoveryFlowBody] :submit_self_service_recovery_flow_body 
     # @return [Array<(SelfServiceRecoveryFlow, Integer, Hash)>] SelfServiceRecoveryFlow data, response status code and response headers
-    def submit_self_service_recovery_flow_with_http_info(flow, opts = {})
+    def submit_self_service_recovery_flow_with_http_info(flow, submit_self_service_recovery_flow_body, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: V0alpha2Api.submit_self_service_recovery_flow ...'
       end
@@ -2780,6 +2784,10 @@ module OryClient
       if @api_client.config.client_side_validation && flow.nil?
         fail ArgumentError, "Missing the required parameter 'flow' when calling V0alpha2Api.submit_self_service_recovery_flow"
       end
+      # verify the required parameter 'submit_self_service_recovery_flow_body' is set
+      if @api_client.config.client_side_validation && submit_self_service_recovery_flow_body.nil?
+        fail ArgumentError, "Missing the required parameter 'submit_self_service_recovery_flow_body' when calling V0alpha2Api.submit_self_service_recovery_flow"
+      end
       # resource path
       local_var_path = '/self-service/recovery'
 
@@ -2803,7 +2811,7 @@ module OryClient
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'submit_self_service_recovery_flow_body'])
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(submit_self_service_recovery_flow_body)
 
       # return_type
       return_type = opts[:debug_return_type] || 'SelfServiceRecoveryFlow'
@@ -2831,23 +2839,23 @@ module OryClient
     # Submit a Registration Flow
     # Use this endpoint to complete a registration flow by sending an identity's traits and password. This endpoint behaves differently for API and browser flows.  API flows expect `application/json` to be sent in the body and respond with HTTP 200 and a application/json body with the created identity success - if the session hook is configured the `session` and `session_token` will also be included; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a `use_flow_id` parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of `application/x-www-form-urlencoded` or `application/json` to be sent in the body and respond with a HTTP 303 redirect to the post/after registration URL or the `return_to` value if it was set and if the registration succeeded; a HTTP 303 redirect to the registration UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of `application/json` will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with `Accept: application/json` in the header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_already_available`: The user is already signed in. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Registration Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/registration?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_registration_flow_body [SubmitSelfServiceRegistrationFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceRegistrationFlowBody] :submit_self_service_registration_flow_body 
     # @return [SuccessfulSelfServiceRegistrationWithoutBrowser]
-    def submit_self_service_registration_flow(flow, opts = {})
-      data, _status_code, _headers = submit_self_service_registration_flow_with_http_info(flow, opts)
+    def submit_self_service_registration_flow(flow, submit_self_service_registration_flow_body, opts = {})
+      data, _status_code, _headers = submit_self_service_registration_flow_with_http_info(flow, submit_self_service_registration_flow_body, opts)
       data
     end
 
     # Submit a Registration Flow
     # Use this endpoint to complete a registration flow by sending an identity&#39;s traits and password. This endpoint behaves differently for API and browser flows.  API flows expect &#x60;application/json&#x60; to be sent in the body and respond with HTTP 200 and a application/json body with the created identity success - if the session hook is configured the &#x60;session&#x60; and &#x60;session_token&#x60; will also be included; HTTP 410 if the original flow expired with the appropriate error messages set and optionally a &#x60;use_flow_id&#x60; parameter in the body; HTTP 400 on form validation errors.  Browser flows expect a Content-Type of &#x60;application/x-www-form-urlencoded&#x60; or &#x60;application/json&#x60; to be sent in the body and respond with a HTTP 303 redirect to the post/after registration URL or the &#x60;return_to&#x60; value if it was set and if the registration succeeded; a HTTP 303 redirect to the registration UI URL with the flow ID containing the validation errors otherwise.  Browser flows with an accept header of &#x60;application/json&#x60; will not redirect but instead respond with HTTP 200 and a application/json body with the signed in identity and a &#x60;Set-Cookie&#x60; header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors.  If this endpoint is called with &#x60;Accept: application/json&#x60; in the header, the response contains the flow without a redirect. In the case of an error, the &#x60;error.id&#x60; of the JSON response body can be one of:  &#x60;session_already_available&#x60;: The user is already signed in. &#x60;security_csrf_violation&#x60;: Unable to fetch the flow because a CSRF violation occurred. &#x60;security_identity_mismatch&#x60;: The requested &#x60;?return_to&#x60; address is not allowed to be used. Adjust this in the configuration! &#x60;browser_location_change_required&#x60;: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Login](https://www.ory.sh/docs/kratos/self-service/flows/user-login) and [User Registration Documentation](https://www.ory.sh/docs/kratos/self-service/flows/user-registration).
     # @param flow [String] The Registration Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/registration?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_registration_flow_body [SubmitSelfServiceRegistrationFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceRegistrationFlowBody] :submit_self_service_registration_flow_body 
     # @return [Array<(SuccessfulSelfServiceRegistrationWithoutBrowser, Integer, Hash)>] SuccessfulSelfServiceRegistrationWithoutBrowser data, response status code and response headers
-    def submit_self_service_registration_flow_with_http_info(flow, opts = {})
+    def submit_self_service_registration_flow_with_http_info(flow, submit_self_service_registration_flow_body, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: V0alpha2Api.submit_self_service_registration_flow ...'
       end
@@ -2855,6 +2863,10 @@ module OryClient
       if @api_client.config.client_side_validation && flow.nil?
         fail ArgumentError, "Missing the required parameter 'flow' when calling V0alpha2Api.submit_self_service_registration_flow"
       end
+      # verify the required parameter 'submit_self_service_registration_flow_body' is set
+      if @api_client.config.client_side_validation && submit_self_service_registration_flow_body.nil?
+        fail ArgumentError, "Missing the required parameter 'submit_self_service_registration_flow_body' when calling V0alpha2Api.submit_self_service_registration_flow"
+      end
       # resource path
       local_var_path = '/self-service/registration'
 
@@ -2877,7 +2889,7 @@ module OryClient
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'submit_self_service_registration_flow_body'])
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(submit_self_service_registration_flow_body)
 
       # return_type
       return_type = opts[:debug_return_type] || 'SuccessfulSelfServiceRegistrationWithoutBrowser'
@@ -2905,25 +2917,25 @@ module OryClient
     # Complete Settings Flow
     # Use this endpoint to complete a settings flow by sending an identity's updated password. This endpoint behaves differently for API and browser flows.  API-initiated flows expect `application/json` to be sent in the body and respond with HTTP 200 and an application/json body with the session token on success; HTTP 303 redirect to a fresh settings flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors. HTTP 401 when the endpoint is called without a valid session token. HTTP 403 when `selfservice.flows.settings.privileged_session_max_age` was reached or the session's AAL is too low. Implies that the user needs to re-authenticate.  Browser flows without HTTP Header `Accept` or with `Accept: text/*` respond with a HTTP 303 redirect to the post/after settings URL or the `return_to` value if it was set and if the flow succeeded; a HTTP 303 redirect to the Settings UI URL with the flow ID containing the validation errors otherwise. a HTTP 303 redirect to the login endpoint when `selfservice.flows.settings.privileged_session_max_age` was reached or the session's AAL is too low.  Browser flows with HTTP Header `Accept: application/json` respond with HTTP 200 and a application/json body with the signed in identity and a `Set-Cookie` header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 401 when the endpoint is called without a valid session cookie. HTTP 403 when the page is accessed without a session cookie or the session's AAL is too low. HTTP 400 on form validation errors.  Depending on your configuration this endpoint might return a 403 error if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor (happens automatically for server-side browser flows) or change the configuration.  If this endpoint is called with a `Accept: application/json` HTTP header, the response contains the flow without a redirect. In the case of an error, the `error.id` of the JSON response body can be one of:  `session_refresh_required`: The identity requested to change something that needs a privileged session. Redirect the identity to the login init endpoint with query parameters `?refresh=true&return_to=<the-current-browser-url>`, or initiate a refresh login flow otherwise. `security_csrf_violation`: Unable to fetch the flow because a CSRF violation occurred. `session_inactive`: No Ory Session was found - sign in a user first. `security_identity_mismatch`: The flow was interrupted with `session_refresh_required` but apparently some other identity logged in instead. `security_identity_mismatch`: The requested `?return_to` address is not allowed to be used. Adjust this in the configuration! `browser_location_change_required`: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Settings & Profile Management Documentation](../self-service/flows/user-settings).
     # @param flow [String] The Settings Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/settings?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_settings_flow_body [SubmitSelfServiceSettingsFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token The Session Token of the Identity performing the settings flow.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceSettingsFlowBody] :submit_self_service_settings_flow_body 
     # @return [SelfServiceSettingsFlow]
-    def submit_self_service_settings_flow(flow, opts = {})
-      data, _status_code, _headers = submit_self_service_settings_flow_with_http_info(flow, opts)
+    def submit_self_service_settings_flow(flow, submit_self_service_settings_flow_body, opts = {})
+      data, _status_code, _headers = submit_self_service_settings_flow_with_http_info(flow, submit_self_service_settings_flow_body, opts)
       data
     end
 
     # Complete Settings Flow
     # Use this endpoint to complete a settings flow by sending an identity&#39;s updated password. This endpoint behaves differently for API and browser flows.  API-initiated flows expect &#x60;application/json&#x60; to be sent in the body and respond with HTTP 200 and an application/json body with the session token on success; HTTP 303 redirect to a fresh settings flow if the original flow expired with the appropriate error messages set; HTTP 400 on form validation errors. HTTP 401 when the endpoint is called without a valid session token. HTTP 403 when &#x60;selfservice.flows.settings.privileged_session_max_age&#x60; was reached or the session&#39;s AAL is too low. Implies that the user needs to re-authenticate.  Browser flows without HTTP Header &#x60;Accept&#x60; or with &#x60;Accept: text/*&#x60; respond with a HTTP 303 redirect to the post/after settings URL or the &#x60;return_to&#x60; value if it was set and if the flow succeeded; a HTTP 303 redirect to the Settings UI URL with the flow ID containing the validation errors otherwise. a HTTP 303 redirect to the login endpoint when &#x60;selfservice.flows.settings.privileged_session_max_age&#x60; was reached or the session&#39;s AAL is too low.  Browser flows with HTTP Header &#x60;Accept: application/json&#x60; respond with HTTP 200 and a application/json body with the signed in identity and a &#x60;Set-Cookie&#x60; header on success; HTTP 303 redirect to a fresh login flow if the original flow expired with the appropriate error messages set; HTTP 401 when the endpoint is called without a valid session cookie. HTTP 403 when the page is accessed without a session cookie or the session&#39;s AAL is too low. HTTP 400 on form validation errors.  Depending on your configuration this endpoint might return a 403 error if the session has a lower Authenticator Assurance Level (AAL) than is possible for the identity. This can happen if the identity has password + webauthn credentials (which would result in AAL2) but the session has only AAL1. If this error occurs, ask the user to sign in with the second factor (happens automatically for server-side browser flows) or change the configuration.  If this endpoint is called with a &#x60;Accept: application/json&#x60; HTTP header, the response contains the flow without a redirect. In the case of an error, the &#x60;error.id&#x60; of the JSON response body can be one of:  &#x60;session_refresh_required&#x60;: The identity requested to change something that needs a privileged session. Redirect the identity to the login init endpoint with query parameters &#x60;?refresh&#x3D;true&amp;return_to&#x3D;&lt;the-current-browser-url&gt;&#x60;, or initiate a refresh login flow otherwise. &#x60;security_csrf_violation&#x60;: Unable to fetch the flow because a CSRF violation occurred. &#x60;session_inactive&#x60;: No Ory Session was found - sign in a user first. &#x60;security_identity_mismatch&#x60;: The flow was interrupted with &#x60;session_refresh_required&#x60; but apparently some other identity logged in instead. &#x60;security_identity_mismatch&#x60;: The requested &#x60;?return_to&#x60; address is not allowed to be used. Adjust this in the configuration! &#x60;browser_location_change_required&#x60;: Usually sent when an AJAX request indicates that the browser needs to open a specific URL. Most likely used in Social Sign In flows.  More information can be found at [Ory Kratos User Settings &amp; Profile Management Documentation](../self-service/flows/user-settings).
     # @param flow [String] The Settings Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/settings?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_settings_flow_body [SubmitSelfServiceSettingsFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :x_session_token The Session Token of the Identity performing the settings flow.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceSettingsFlowBody] :submit_self_service_settings_flow_body 
     # @return [Array<(SelfServiceSettingsFlow, Integer, Hash)>] SelfServiceSettingsFlow data, response status code and response headers
-    def submit_self_service_settings_flow_with_http_info(flow, opts = {})
+    def submit_self_service_settings_flow_with_http_info(flow, submit_self_service_settings_flow_body, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: V0alpha2Api.submit_self_service_settings_flow ...'
       end
@@ -2931,6 +2943,10 @@ module OryClient
       if @api_client.config.client_side_validation && flow.nil?
         fail ArgumentError, "Missing the required parameter 'flow' when calling V0alpha2Api.submit_self_service_settings_flow"
       end
+      # verify the required parameter 'submit_self_service_settings_flow_body' is set
+      if @api_client.config.client_side_validation && submit_self_service_settings_flow_body.nil?
+        fail ArgumentError, "Missing the required parameter 'submit_self_service_settings_flow_body' when calling V0alpha2Api.submit_self_service_settings_flow"
+      end
       # resource path
       local_var_path = '/self-service/settings'
 
@@ -2954,7 +2970,7 @@ module OryClient
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'submit_self_service_settings_flow_body'])
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(submit_self_service_settings_flow_body)
 
       # return_type
       return_type = opts[:debug_return_type] || 'SelfServiceSettingsFlow'
@@ -2982,25 +2998,25 @@ module OryClient
     # Complete Verification Flow
     # Use this endpoint to complete a verification flow. This endpoint behaves differently for API and browser flows and has several states:  `choose_method` expects `flow` (in the URL query) and `email` (in the body) to be sent and works with API- and Browser-initiated flows. For API clients and Browser clients with HTTP Header `Accept: application/json` it either returns a HTTP 200 OK when the form is valid and HTTP 400 OK when the form is invalid and a HTTP 303 See Other redirect with a fresh verification flow if the flow was otherwise invalid (e.g. expired). For Browser clients without HTTP Header `Accept` or with `Accept: text/*` it returns a HTTP 303 See Other redirect to the Verification UI URL with the Verification Flow ID appended. `sent_email` is the success state after `choose_method` when using the `link` method and allows the user to request another verification email. It works for both API and Browser-initiated flows and returns the same responses as the flow in `choose_method` state. `passed_challenge` expects a `token` to be sent in the URL query and given the nature of the flow (\"sending a verification link\") does not have any API capabilities. The server responds with a HTTP 303 See Other redirect either to the Settings UI URL (if the link was valid) and instructs the user to update their password, or a redirect to the Verification UI URL with a new Verification Flow ID which contains an error message that the verification link was invalid.  More information can be found at [Ory Kratos Email and Phone Verification Documentation](https://www.ory.sh/docs/kratos/selfservice/flows/verify-email-account-activation).
     # @param flow [String] The Verification Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/verification?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_verification_flow_body [SubmitSelfServiceVerificationFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :token Verification Token  The verification token which completes the verification request. If the token is invalid (e.g. expired) an error will be shown to the end-user.  This parameter is usually set in a link and not used by any direct API call.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceVerificationFlowBody] :submit_self_service_verification_flow_body 
     # @return [SelfServiceVerificationFlow]
-    def submit_self_service_verification_flow(flow, opts = {})
-      data, _status_code, _headers = submit_self_service_verification_flow_with_http_info(flow, opts)
+    def submit_self_service_verification_flow(flow, submit_self_service_verification_flow_body, opts = {})
+      data, _status_code, _headers = submit_self_service_verification_flow_with_http_info(flow, submit_self_service_verification_flow_body, opts)
       data
     end
 
     # Complete Verification Flow
     # Use this endpoint to complete a verification flow. This endpoint behaves differently for API and browser flows and has several states:  &#x60;choose_method&#x60; expects &#x60;flow&#x60; (in the URL query) and &#x60;email&#x60; (in the body) to be sent and works with API- and Browser-initiated flows. For API clients and Browser clients with HTTP Header &#x60;Accept: application/json&#x60; it either returns a HTTP 200 OK when the form is valid and HTTP 400 OK when the form is invalid and a HTTP 303 See Other redirect with a fresh verification flow if the flow was otherwise invalid (e.g. expired). For Browser clients without HTTP Header &#x60;Accept&#x60; or with &#x60;Accept: text/*&#x60; it returns a HTTP 303 See Other redirect to the Verification UI URL with the Verification Flow ID appended. &#x60;sent_email&#x60; is the success state after &#x60;choose_method&#x60; when using the &#x60;link&#x60; method and allows the user to request another verification email. It works for both API and Browser-initiated flows and returns the same responses as the flow in &#x60;choose_method&#x60; state. &#x60;passed_challenge&#x60; expects a &#x60;token&#x60; to be sent in the URL query and given the nature of the flow (\&quot;sending a verification link\&quot;) does not have any API capabilities. The server responds with a HTTP 303 See Other redirect either to the Settings UI URL (if the link was valid) and instructs the user to update their password, or a redirect to the Verification UI URL with a new Verification Flow ID which contains an error message that the verification link was invalid.  More information can be found at [Ory Kratos Email and Phone Verification Documentation](https://www.ory.sh/docs/kratos/selfservice/flows/verify-email-account-activation).
     # @param flow [String] The Verification Flow ID  The value for this parameter comes from &#x60;flow&#x60; URL Query parameter sent to your application (e.g. &#x60;/verification?flow&#x3D;abcde&#x60;).
+    # @param submit_self_service_verification_flow_body [SubmitSelfServiceVerificationFlowBody] 
     # @param [Hash] opts the optional parameters
     # @option opts [String] :token Verification Token  The verification token which completes the verification request. If the token is invalid (e.g. expired) an error will be shown to the end-user.  This parameter is usually set in a link and not used by any direct API call.
     # @option opts [String] :cookie HTTP Cookies  When using the SDK in a browser app, on the server side you must include the HTTP Cookie Header sent by the client to your server here. This ensures that CSRF and session cookies are respected.
-    # @option opts [SubmitSelfServiceVerificationFlowBody] :submit_self_service_verification_flow_body 
     # @return [Array<(SelfServiceVerificationFlow, Integer, Hash)>] SelfServiceVerificationFlow data, response status code and response headers
-    def submit_self_service_verification_flow_with_http_info(flow, opts = {})
+    def submit_self_service_verification_flow_with_http_info(flow, submit_self_service_verification_flow_body, opts = {})
       if @api_client.config.debugging
         @api_client.config.logger.debug 'Calling API: V0alpha2Api.submit_self_service_verification_flow ...'
       end
@@ -3008,6 +3024,10 @@ module OryClient
       if @api_client.config.client_side_validation && flow.nil?
         fail ArgumentError, "Missing the required parameter 'flow' when calling V0alpha2Api.submit_self_service_verification_flow"
       end
+      # verify the required parameter 'submit_self_service_verification_flow_body' is set
+      if @api_client.config.client_side_validation && submit_self_service_verification_flow_body.nil?
+        fail ArgumentError, "Missing the required parameter 'submit_self_service_verification_flow_body' when calling V0alpha2Api.submit_self_service_verification_flow"
+      end
       # resource path
       local_var_path = '/self-service/verification'
 
@@ -3031,7 +3051,7 @@ module OryClient
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'submit_self_service_verification_flow_body'])
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(submit_self_service_verification_flow_body)
 
       # return_type
       return_type = opts[:debug_return_type] || 'SelfServiceVerificationFlow'

data/lib/ory-client/api/write_api.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/api_client.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/api_error.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/configuration.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/active_project.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_body.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_import_credentials_oidc.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_import_credentials_oidc_config.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_import_credentials_oidc_provider.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_import_credentials_password.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_identity_import_credentials_password_config.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_create_self_service_recovery_link_body.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_identity_import_credentials.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/admin_update_identity_body.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/api_token.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/authenticator_assurance_level.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/cloud_account.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/cname_settings.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/create_custom_hostname_body.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0
@@ -18,10 +18,10 @@ module OryClient
     # The domain where cookies will be set. Has to be a parent domain of the custom hostname to work.
     attr_accessor :cookie_domain
 
-    # Cors Allowed origins for the custom hostname.
+    # CORS Allowed origins for the custom hostname.
     attr_accessor :cors_allowed_origins
 
-    # Cors Enabled for the custom hostname.
+    # CORS Enabled for the custom hostname.
     attr_accessor :cors_enabled
 
     # The custom hostname where the API will be exposed.

data/lib/ory-client/models/create_project_body.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/create_subscription_payload.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/error_authenticator_assurance_level_not_satisfied.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/expand_tree.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/generic_error.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/generic_error_content.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/get_check_response.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/get_relation_tuples_response.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/health_not_ready_status.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0

data/lib/ory-client/models/health_status.rb

@@ -3,7 +3,7 @@
 
 #Documentation for all public and administrative Ory APIs. Administrative APIs can only be accessed with a valid Personal Access Token. Public APIs are mostly used in browsers. 
 
-The version of the OpenAPI document: v0.0.1-alpha.179
+The version of the OpenAPI document: v0.0.1-alpha.180
 Contact: support@ory.sh
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.4.0