orange-gollum 1.0.0

data/lib/orange-gollum/assets/js/MathJax/config/MMLorHTML.js

@@ -0,0 +1,63 @@
+/*************************************************************
+ *
+ *  MathJax/extensions/MMLorHTML.js
+ *  
+ *  Chooses between the NativeMML and HTML-CSS output jax depending
+ *  on the capabilities of the browser and configuration settings
+ *  of the page.
+ *  
+ *  This file should be added to the config array when configuring
+ *  MathJax.  Note that if you include this, you should NOT include
+ *  an output jax in the jax array (it will be added for you by
+ *  this file).
+ *
+ *  ---------------------------------------------------------------------
+ *  
+ *  Copyright (c) 2010 Design Science, Inc.
+ * 
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+(function (HUB) {
+  var CONFIG = MathJax.Hub.Insert({prefer: "HTML"},(MathJax.Hub.config.MMLorHTML||{}));
+
+  var MINBROWSERVERSION = {
+    Firefox: 3.0,
+    Opera: 9.52,
+    MSIE: 6.0,
+    Chrome: 0.3,
+    Safari: 2.0,
+    Konqueror: 4.0
+  };
+
+  var canUseHTML = (HUB.Browser.version === "0.0" ||
+                    HUB.Browser.versionAtLeast(MINBROWSERVERSION[HUB.Browser]||0.0));
+
+  var MathPlayer; try {new ActiveXObject("MathPlayer.Factory.1"); MathPlayer = true} catch(err) {MathPlayer = false};
+
+  var canUseMML = (HUB.Browser.isFirefox && HUB.Browser.versionAtLeast("1.5")) ||
+                  (HUB.Browser.isMSIE && MathPlayer) ||
+                  (HUB.Browser.isOpera && HUB.Browser.versionAtLeast("9.52"));
+  if (canUseHTML || canUseMML) {
+    if (canUseMML && (CONFIG.prefer === "MML" || !canUseHTML))
+      {HUB.config.jax.push("output/NativeMML")} else {HUB.config.jax.push("output/HTML-CSS")}
+  } else {
+    HUB.PreProcess.disabled = true;
+    HUB.prepareScripts.disabled = true;
+    MathJax.Message.Set("Your browser does not support MathJax",null,4000);
+    HUB.Startup.signal.Post("MathJax not supported");
+  }
+
+})(MathJax.Hub);
+
+MathJax.Ajax.loadComplete("[MathJax]/config/MMLorHTML.js");

data/lib/orange-gollum/assets/js/MathJax/config/MathJax.js

@@ -0,0 +1,351 @@
+/*************************************************************
+ *
+ *  MathJax/config/MathJax.js
+ *
+ *  This configuration file is loaded when there is no explicit
+ *  configuration script in the <script> tag that loads MathJax.js
+ *
+ *  Use it to customize the MathJax settings.  See comments below.
+ *
+ *  ---------------------------------------------------------------------
+ *  
+ *  Copyright (c) 2009-10 Design Science, Inc.
+ * 
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+MathJax.Hub.Config({
+
+  //
+  //  A comma-separated list of configuration files to load
+  //  when MathJax starts up.  E.g., to define local macros, etc.
+  //  teh default directory is the MathJax/config directory.
+  //  
+  //  Example:    config: ["local/local.js"],
+  //  Example:    config: ["local/local.js","MMLtoHTML.js"],
+  //
+  config: [],
+  
+  //
+  //  A comma-separated list of CSS stylesheet files to be loaded
+  //  when MathJax starts up.  The default directory is the
+  //  MathJax/config directory.
+  // 
+  //  Example:    styleSheets: ["MathJax.css"],
+  //
+  styleSheets: [],
+  
+  //
+  //  Styles to be defined dynamically at startup time.
+  //  
+  //  Example:
+  //      styles: {
+  //        ".MathJax .merror": {
+  //          color: "blue",
+  //          "background-color": "green"
+  //        }
+  //      },
+  //
+  styles: {},
+  
+  //
+  //  A comma-separated list of input and output jax to initialize at startup.
+  //  Their main code is only loaded when they are actually used, so it is not
+  //  inefficient to include jax that are not actually used on the page.  These
+  //  are found in the MathJax/jax directory.
+  //  
+  jax: ["input/TeX","output/HTML-CSS"],
+  
+  //
+  //  A comma-separated list of extensions to load at startup.  The default
+  //  directory is MathJax/extensions.
+  //  
+  //  Example:    extensions: ["tex2jax.js","TeX/AMSmath.js","TeX/AMSsymbols.js"],
+  //
+  extensions: ["tex2jax.js"],
+  
+  //
+  //  Comma-separated lists of .js and .css files to load at startup that depend
+  //  on the browser being used.  The default directory is MathJax/config/browsers.
+  //
+  browser: {
+    MSIE: [],
+    Chrome: [],
+    Safari: [],
+    Firefox: [],
+    Opera: []
+  },
+  
+  //
+  //  Patterns to remove from before and after math script tags.  If you are not
+  //  using one of the preprocessors (e.g., tex2jax), you need to insert something
+  //  etra into your HTML file in order to avoid a bug in Internet Explorer (IE
+  //  removes spaces from the DOM that it things are redundent, and since a SCRIPT
+  //  tag usually doesn't add content to the page, if there is a space before and after
+  //  a MathJax SCRIPT tag, IE will remove the first space.  When MathJax inserts
+  //  the typeset mathematics, this means there will be no space before it and the
+  //  preceeding text.  In order to avoid this, you should include some "guard characters"
+  //  before or after the math SCRIPT tag; define the patterns you want to use below.
+  //  Note that these are actually regular expressions, so you will need to quote
+  //  special characters.  If both are defined, both must be present in order to be
+  //  removed.  See also the preRemoveClass comments below.
+  //  
+  //  Example:
+  //      preJax: "\\\\",  // makes a double backslash the preJax text
+  //    or
+  //      preJax:  "\[\[", // jax scripts must be enclosed in double brackets
+  //      postJax: "\]\]",
+  //
+  preJax: null,
+  postJax: null,
+  
+  //
+  //  The CSS class for a math preview to be removed preceeding a MathJax SCRIPT tag.
+  //  This allows you to include a math preview in a form that will be displayed prior
+  //  to MathJax loading performing its typesetting.  It also avoids the Internet Explorer
+  //  space-removal bug, and can be used in place of preJax and postJax if that is more
+  //  convenient.  For example
+  //  
+  //      <span class="MathJax_Preview">[math]</span><script type="math/tex">...</script>
+  //
+  //  would display "[math]" in place of the math until MathJax is able to typeset it.
+  //
+  preRemoveClass: "MathJax_Preview",
+  
+  //
+  //  This value controls whether the "Processing Math: nn%" message are displayed
+  //  in the lower left-hand corner.  Set to "false" to prevent those messages (though
+  //  file loading and other messages will still be shown).
+  //
+  showProcessingMessages: true,
+  
+  //
+  //  Normally MathJax will perform its starup commands (loading of
+  //  configuration, styles, jax, and so on) as soon as it can.  If you
+  //  expect to be doing additional configuration on the page, however, you
+  //  may want to have it wait until the page's onload hander is called.  If so,
+  //  set this to "onload".
+  //
+  delayStartupUntil: "none",
+
+  //
+  //  Normally MathJax will typeset the mathematics on the page as soon as
+  //  the page is loaded.  If you want to delay that process, in which case
+  //  you will need to call MathJax.Hub.Typeset() yourself by hand, set
+  //  this value to true.
+  //
+  skipStartupTypeset: false,
+  
+  //============================================================================
+  //
+  //  These parameters control the tex2jax preprocessor (when you have included
+  //  "tex2jax.js" in the extensions list above).
+  //
+  tex2jax: {
+
+    //
+    //  The Id of the element to be processed (defaults to full document)
+    //
+    element: null,
+
+    //
+    //  The delimiters that surround in-line math expressions.  The first in each
+    //  pair is the initial delimiter and the second is the terminal delimiter.
+    //  Comment out any that you don't want, but be sure there is no extra
+    //  comma at the end of the last item in the list -- some browsers won't
+    //  be able to handle that.
+    //
+    inlineMath: [
+//    ['$','$'],      // uncomment this for standard TeX math delimiters
+      ['\\(','\\)']
+    ],
+
+    //
+    //  The delimiters that surround displayed math expressions.  The first in each
+    //  pair is the initial delimiter and the second is the terminal delimiter.
+    //  Comment out any that you don't want, but be sure there is no extra
+    //  comma at the end of the last item in the list -- some browsers won't
+    //  be able to handle that.
+    //
+    displayMath: [
+      ['$$','$$'],
+      ['\\[','\\]']
+    ],
+
+    //
+    //  Set to "true" to allow \$ to produce a dollar without starting in-line
+    //  math mode.  If you uncomment the ['$','$'] line above, you should change
+    //  this to true so that you can insert plain dollar signs into your documents
+    //
+    processEscapes: false,
+
+    //
+    //  Controls whether tex2jax processes LaTeX environments outside of math
+    //  mode.  Set to "false" to prevent processing of environments except within
+    //  math mode.
+    //
+    processEnvironments: true,
+
+    //
+    //  Controls whether tex2jax inserts MathJax_Preview spans so that the TeX
+    //  code is visible until it is processed by MathJax.  Set to "false" to prevent
+    //  the previews from being inserted (the math will simply disappear until it is
+    //  typeset).
+    //  
+    previewTeX: true
+    
+  },
+  
+  //============================================================================
+  //
+  //  These parameters control the jsMath2jax preprocessor (when you have included
+  //  "jsMath2jax.js" in the extensions list above).
+  //
+  jsMath2jax: {
+    //
+    //  Controls whether jsMath2tex inserts MathJax_Preview elements so that
+    //  the TeX code is visible until it is processed by MathJax.  Set to "false"
+    //  to prevent previews from being inserted (the math will simply disappear
+    //  until it is typeset).
+    //
+    previewTeX: true
+  },
+
+  //============================================================================
+  //
+  //  These parameters control the TeX input jax.
+  //
+  TeX: {
+
+    //
+    //  This specifies the side on which \tag{} macros will place the tags.
+    //  Set to "left" to place on the left-hand side.
+    //
+    TagSide: "right",
+    
+    //
+    //  This is the amound of indentation (from right or left) for the tags.
+    //
+    TagIndent: ".8em",
+    
+    //
+    //  This is the width to use for the multline environment
+    //
+    MultLineWidth: "85%"
+  },
+
+  //============================================================================
+  //
+  //  These parameters control the MathML inupt jax.
+  //
+  MathML: {
+    //
+    //  This specifies whether to use TeX spacing or MathML spacing when the
+    //  HTML-CSS output jax is used.
+    //
+    useMathMLspacing: false
+  },
+  
+  //============================================================================
+  //
+  //  These parameters control the HTML-CSS output jax.
+  //
+  "HTML-CSS": {
+    
+    //
+    //  This controls the global scaling of mathematics as compared to the 
+    //  surrounding text.  Values between 100 and 133 are usually good choices.
+    //
+    scale: 100,
+    
+    //
+    //  This is a list of the fonts available to MathJax in the
+    //  MathJax/Fonts/HTML-CSS directory.  If you don't want MathJax
+    //  to use one of these fonts (when available on the user's computer),
+    //  remove it from the list.  Use an empty list to force the use of
+    //  web fonts (or image fonts).
+    //
+    availableFonts: ["STIX","TeX"],
+    
+    //
+    //  This is the preferred font to use when more than one of those
+    //  listed above is available.
+    //
+    preferredFont: "TeX",
+    
+    //
+    //  This is the web-based font to use when none of the fonts listed
+    //  above are available on the user's computer.  Note that currently
+    //  only the TeX font is available in a web-based form.  Set this to
+    //  
+    //      webFont: null,
+    //
+    //  if you want to prevent the use of web-based fonts.
+    //
+    webFont: "TeX",
+    
+    //
+    //  This is the font to use for image fallback mode (when none of the
+    //  fonts listed above are available and the browser doesn't support
+    //  web-fonts via the @font-face CSS directive).  Note that currently
+    //  only the TeX font is available as an image font.  Set this to
+    //
+    //      imageFont: null,
+    //  
+    //  if you want to prevent the use of image fonts (e.g., you have not
+    //  installed the image fonts on your server).  In this case, only
+    //  browsers that support web-based fonts will be able to view your pages
+    //  without having the fonts installed on the client computer.  The browsers
+    //  that support web-based fonts include: IE6 and later, Chrome, Safari3.1
+    //  and above, Firefox3.5 and later, and Opera10 and later.  Note that
+    //  Firefox3.0 is NOT on this list, so without image fonts, FF3.0 users
+    //  will be required to to download and install either the STIX fonts or the
+    //  MathJax TeX fonts.
+    //
+    imageFont: "TeX",
+
+    //
+    //  This allows you to define or modify the styles used to display
+    //  various math elements created by MathJax.
+    //  
+    //  Example:
+    //      styles: {
+    //        ".MathJax_Display": {
+    //          "text-align": "left",        // left aligned displayed math
+    //          "margin-left": "3em",        //   with 3em indentation
+    //        },
+    //        ".MathJax_Preview": {
+    //          "font-size": "80%",          // preview uses a smaller font
+    //          color: "red"                 //    and is in red
+    //        }
+    //      }
+    //
+    styles: {}
+  },
+  
+  //============================================================================
+  //
+  //  These parameters control the MMLorHTML configuration file.
+  //  NOTE:  if you add MMLorHTML.js to the config array above,
+  //  you must REMOVE the output jax from the jax array.
+  //
+  MMLorHTML: {
+    //
+    //  The output jax that is to be preferred when both are possible
+    //  (set to "MML" for native MathML, "HTML" for MathJax's HTML-CSS output jax).
+    //
+    prefer: "HTML"
+  }
+});
+
+MathJax.Ajax.loadComplete("[MathJax]/config/MathJax.js");

data/lib/orange-gollum/assets/js/MathJax/config/local/local.js

@@ -0,0 +1,37 @@
+/*************************************************************
+ *
+ *  MathJax/config/local/local.js
+ *  
+ *  Include changes and configuration local to your installation
+ *  in this file.  For example, common macros can be defined here
+ *  (see below).  To use this file, add "local/local.js" to the
+ *  config array in MathJax.js or your MathJax.Hub.Config() call.
+ *
+ *  ---------------------------------------------------------------------
+ *  
+ *  Copyright (c) 2009 Design Science, Inc.
+ * 
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+
+MathJax.Hub.Register.StartupHook("TeX Jax Ready",function () {
+  var TEX = MathJax.InputJax.TeX;
+
+  // place macros here.  E.g.:
+  //   TEX.Macro("R","{\\bf R}");
+  //   TEX.Macro("op","\\mathop{\\rm #1}",1); // a macro with 1 parameter
+  
+});
+
+MathJax.Ajax.loadComplete("[MathJax]/config/local/local.js");