opentelemetry-semantic_conventions 1.11.0 → 1.36.0

data/lib/opentelemetry/semconv/incubating/db/metrics.rb

@@ -0,0 +1,156 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DB
+        # @!group Metrics Names
+      
+        # The number of connections that are currently in state described by the `state` attribute
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_COUNT = 'db.client.connection.count'
+    
+        # The time it took to create a new connection
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_CREATE_TIME = 'db.client.connection.create_time'
+    
+        # The maximum number of idle open connections allowed
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_IDLE_MAX = 'db.client.connection.idle.max'
+    
+        # The minimum number of idle open connections allowed
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_IDLE_MIN = 'db.client.connection.idle.min'
+    
+        # The maximum number of open connections allowed
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_MAX = 'db.client.connection.max'
+    
+        # The number of current pending requests for an open connection
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_PENDING_REQUESTS = 'db.client.connection.pending_requests'
+    
+        # The number of connection timeouts that have occurred trying to obtain a connection from the pool
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_TIMEOUTS = 'db.client.connection.timeouts'
+    
+        # The time between borrowing a connection and returning it to the pool
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_USE_TIME = 'db.client.connection.use_time'
+    
+        # The time it took to obtain an open connection from the pool
+        #
+        # @note Stability Level: development
+        DB_CLIENT_CONNECTION_WAIT_TIME = 'db.client.connection.wait_time'
+    
+        # Deprecated, use `db.client.connection.create_time` instead. Note: the unit also changed from `ms` to `s`.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.create_time` with unit `s`.", "reason": "uncategorized"}
+        DB_CLIENT_CONNECTIONS_CREATE_TIME = 'db.client.connections.create_time'
+    
+        # Deprecated, use `db.client.connection.idle.max` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.idle.max`.", "reason": "renamed", "renamed_to": "db.client.connection.idle.max"}
+        DB_CLIENT_CONNECTIONS_IDLE_MAX = 'db.client.connections.idle.max'
+    
+        # Deprecated, use `db.client.connection.idle.min` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.idle.min`.", "reason": "renamed", "renamed_to": "db.client.connection.idle.min"}
+        DB_CLIENT_CONNECTIONS_IDLE_MIN = 'db.client.connections.idle.min'
+    
+        # Deprecated, use `db.client.connection.max` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.max`.", "reason": "renamed", "renamed_to": "db.client.connection.max"}
+        DB_CLIENT_CONNECTIONS_MAX = 'db.client.connections.max'
+    
+        # Deprecated, use `db.client.connection.pending_requests` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.pending_requests`.", "reason": "renamed", "renamed_to": "db.client.connection.pending_requests"}
+        DB_CLIENT_CONNECTIONS_PENDING_REQUESTS = 'db.client.connections.pending_requests'
+    
+        # Deprecated, use `db.client.connection.timeouts` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.timeouts`.", "reason": "renamed", "renamed_to": "db.client.connection.timeouts"}
+        DB_CLIENT_CONNECTIONS_TIMEOUTS = 'db.client.connections.timeouts'
+    
+        # Deprecated, use `db.client.connection.count` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.count`.", "reason": "renamed", "renamed_to": "db.client.connection.count"}
+        DB_CLIENT_CONNECTIONS_USAGE = 'db.client.connections.usage'
+    
+        # Deprecated, use `db.client.connection.use_time` instead. Note: the unit also changed from `ms` to `s`.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.use_time` with unit `s`.", "reason": "uncategorized"}
+        DB_CLIENT_CONNECTIONS_USE_TIME = 'db.client.connections.use_time'
+    
+        # Deprecated, use `db.client.connection.wait_time` instead. Note: the unit also changed from `ms` to `s`.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `db.client.connection.wait_time` with unit `s`.", "reason": "uncategorized"}
+        DB_CLIENT_CONNECTIONS_WAIT_TIME = 'db.client.connections.wait_time'
+    
+        # Deprecated, use `azure.cosmosdb.client.active_instance.count` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `azure.cosmosdb.client.active_instance.count`.", "reason": "renamed", "renamed_to": "azure.cosmosdb.client.active_instance.count"}
+        DB_CLIENT_COSMOSDB_ACTIVE_INSTANCE_COUNT = 'db.client.cosmosdb.active_instance.count'
+    
+        # Deprecated, use `azure.cosmosdb.client.operation.request_charge` instead.
+        #
+        # @note Stability Level: development
+        # @deprecated {"note": "Replaced by `azure.cosmosdb.client.operation.request_charge`.", "reason": "renamed", "renamed_to": "azure.cosmosdb.client.operation.request_charge"}
+        DB_CLIENT_COSMOSDB_OPERATION_REQUEST_CHARGE = 'db.client.cosmosdb.operation.request_charge'
+    
+        # Duration of database client operations.
+        #
+        # Batch operations SHOULD be recorded as a single operation.
+        #
+        # @note Stability Level: stable
+        #
+        # @deprecated Now available in the stable namespace at {OpenTelemetry::SemConv::DB::DB_CLIENT_OPERATION_DURATION}.
+        DB_CLIENT_OPERATION_DURATION = 'db.client.operation.duration'
+    
+        # The actual number of records returned by the database operation.
+        #
+        # @note Stability Level: development
+        DB_CLIENT_RESPONSE_RETURNED_ROWS = 'db.client.response.returned_rows'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/db.rb

@@ -0,0 +1,22 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'db/attributes'
+require_relative 'db/metrics'

data/lib/opentelemetry/semconv/incubating/deployment/attributes.rb

@@ -0,0 +1,84 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DEPLOYMENT
+        # @!group Attribute Names
+      
+        # 'Deprecated, use `deployment.environment.name` instead.'
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   staging
+        #   production
+        #
+        # @deprecated {"note": "Replaced by `deployment.environment.name`.", "reason": "renamed", "renamed_to": "deployment.environment.name"}
+        DEPLOYMENT_ENVIRONMENT = 'deployment.environment'
+    
+        # Name of the [deployment environment](https://wikipedia.org/wiki/Deployment_environment) (aka deployment tier).
+        #
+        # `deployment.environment.name` does not affect the uniqueness constraints defined through
+        # the `service.namespace`, `service.name` and `service.instance.id` resource attributes.
+        # This implies that resources carrying the following attribute combinations MUST be
+        # considered to be identifying the same service:
+        #
+        # - `service.name=frontend`, `deployment.environment.name=production`
+        # - `service.name=frontend`, `deployment.environment.name=staging`.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   staging
+        #   production
+        #
+        DEPLOYMENT_ENVIRONMENT_NAME = 'deployment.environment.name'
+    
+        # The id of the deployment.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   1208
+        #
+        DEPLOYMENT_ID = 'deployment.id'
+    
+        # The name of the deployment.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   deploy my app
+        #   deploy-frontend
+        #
+        DEPLOYMENT_NAME = 'deployment.name'
+    
+        # The status of the deployment.
+        #
+        # @note Stability Level: development
+        DEPLOYMENT_STATUS = 'deployment.status'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/deployment.rb

@@ -0,0 +1,21 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'deployment/attributes'

data/lib/opentelemetry/semconv/incubating/destination/attributes.rb

@@ -0,0 +1,54 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DESTINATION
+        # @!group Attribute Names
+      
+        # Destination address - domain name if available without reverse DNS lookup; otherwise, IP address or Unix domain socket name.
+        #
+        # When observed from the source side, and when communicating through an intermediary, `destination.address` SHOULD represent the destination address behind any intermediaries, for example proxies, if it's available.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   destination.example.com
+        #   10.1.2.80
+        #   /tmp/my.sock
+        #
+        DESTINATION_ADDRESS = 'destination.address'
+    
+        # Destination port number
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   3389
+        #   2888
+        #
+        DESTINATION_PORT = 'destination.port'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/destination.rb

@@ -0,0 +1,21 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'destination/attributes'

data/lib/opentelemetry/semconv/incubating/device/attributes.rb

@@ -0,0 +1,88 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DEVICE
+        # @!group Attribute Names
+      
+        # A unique identifier representing the device
+        #
+        # Its value SHOULD be identical for all apps on a device and it SHOULD NOT change if an app is uninstalled and re-installed.
+        # However, it might be resettable by the user for all apps on a device.
+        # Hardware IDs (e.g. vendor-specific serial number, IMEI or MAC address) MAY be used as values.
+        #
+        # More information about Android identifier best practices can be found [here](https://developer.android.com/training/articles/user-data-ids).
+        #
+        # > [!WARNING]> This attribute may contain sensitive (PII) information. Caution should be taken when storing personal data or anything which can identify a user. GDPR and data protection laws may apply,
+        # > ensure you do your own due diligence.> Due to these reasons, this identifier is not recommended for consumer applications and will likely result in rejection from both Google Play and App Store.
+        # > However, it may be appropriate for specific enterprise scenarios, such as kiosk devices or enterprise-managed devices, with appropriate compliance clearance.
+        # > Any instrumentation providing this identifier MUST implement it as an opt-in feature.> See [`app.installation.id`](/docs/registry/attributes/app.md#app-installation-id)>  for a more privacy-preserving alternative.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   123456789012345
+        #   01:23:45:67:89:AB
+        #
+        DEVICE_ID = 'device.id'
+    
+        # The name of the device manufacturer
+        #
+        # The Android OS provides this field via [Build](https://developer.android.com/reference/android/os/Build#MANUFACTURER). iOS apps SHOULD hardcode the value `Apple`.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   Apple
+        #   Samsung
+        #
+        DEVICE_MANUFACTURER = 'device.manufacturer'
+    
+        # The model identifier for the device
+        #
+        # It's recommended this value represents a machine-readable version of the model identifier rather than the market or consumer-friendly name of the device.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   iPhone3,4
+        #   SM-G920F
+        #
+        DEVICE_MODEL_IDENTIFIER = 'device.model.identifier'
+    
+        # The marketing name for the device model
+        #
+        # It's recommended this value represents a human-readable version of the device model rather than a machine-readable alternative.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   iPhone 6s Plus
+        #   Samsung Galaxy S6
+        #
+        DEVICE_MODEL_NAME = 'device.model.name'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/device.rb

@@ -0,0 +1,21 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'device/attributes'

data/lib/opentelemetry/semconv/incubating/disk/attributes.rb

@@ -0,0 +1,40 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DISK
+        # @!group Attribute Names
+      
+        # The disk IO operation direction.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   read
+        #
+        DISK_IO_DIRECTION = 'disk.io.direction'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/disk.rb

@@ -0,0 +1,21 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'disk/attributes'

data/lib/opentelemetry/semconv/incubating/dns/attributes.rb

@@ -0,0 +1,52 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DNS
+        # @!group Attribute Names
+      
+        # The list of IPv4 or IPv6 addresses resolved during DNS lookup.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   ["10.0.0.1", "2001:0db8:85a3:0000:0000:8a2e:0370:7334"]
+        #
+        DNS_ANSWERS = 'dns.answers'
+    
+        # The name being queried.
+        #
+        # If the name field contains non-printable characters (below 32 or above 126), those characters should be represented as escaped base 10 integers (\DDD). Back slashes and quotes should be escaped. Tabs, carriage returns, and line feeds should be converted to \t, \r, and \n respectively.
+        #
+        # @note Stability Level: development
+        #
+        # @example Sample Values
+        #   www.example.com
+        #   opentelemetry.io
+        #
+        DNS_QUESTION_NAME = 'dns.question.name'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/dns/metrics.rb

@@ -0,0 +1,36 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# This file was autogenerated. Do not edit it by hand.
+
+module OpenTelemetry
+  module SemConv
+    module Incubating
+      module DNS
+        # @!group Metrics Names
+      
+        # Measures the time taken to perform a DNS lookup.
+        #
+        # @note Stability Level: development
+        DNS_LOOKUP_DURATION = 'dns.lookup.duration'
+    
+        # @!endgroup
+      end
+    end
+  end
+end

data/lib/opentelemetry/semconv/incubating/dns.rb

@@ -0,0 +1,22 @@
+# frozen_string_literal: true
+
+# Copyright The OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# This file was autogenerated. Do not edit it by hand.
+
+require_relative 'dns/attributes'
+require_relative 'dns/metrics'