RubyGems - openstudio-standards - Versions diffs - 0.2.17.rc2 → 0.3.1.rc1 - Mend

openstudio-standards 0.2.17.rc2 → 0.3.1.rc1

Files changed (233) hide show

data/lib/openstudio-standards/hvac_sizing/Siz.AirTermSnglDuctVAVNoReheat.rb DELETED Viewed

@@ -1,68 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::AirTerminalSingleDuctVAVReheat
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.AirTerminalSingleDuctVAVReheat", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_flow_rate = self.autosizedMaximumAirFlowRate
-    if rated_flow_rate.is_initialized
-      self.setMaximumAirFlowRate(rated_flow_rate.get)
-    end
-    maximum_hot_water_or_steam_flow_rate = self.autosizedMaximumHotWaterOrSteamFlowRate
-    if maximum_hot_water_or_steam_flow_rate.is_initialized
-      self.setMaximumHotWaterOrSteamFlowRate(maximum_hot_water_or_steam_flow_rate.get)
-    end
-    maximum_flow_per_zone_floor_area_during_reheat = self.autosizedMaximumFlowPerZoneFloorAreaDuringReheat
-    if maximum_flow_per_zone_floor_area_during_reheat.is_initialized
-      self.setMaximumFlowPerZoneFloorAreaDuringReheat(maximum_flow_per_zone_floor_area_during_reheat.get)
-    end
-    maximum_flow_fraction_during_reheat = self.autosizedMaximumFlowFractionDuringReheat
-    if maximum_flow_fraction_during_reheat.is_initialized
-      self.setMaximumFlowFractionDuringReheat(maximum_flow_fraction_during_reheat.get)
-    end
-  end
-  # returns the autosized maximum air flow rate as an optional double
-  def autosizedMaximumAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated power consumption as an optional double
-  def autosizedMaximumHotWaterOrSteamFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Reheat Water Flow Rate', 'm3/s')
-  end
- # returns the autosized maximum flow per zone floor area during reheat as an optional double
-  def autosizedMaximumFlowPerZoneFloorAreaDuringReheat
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow per Zone Floor Area during Reheat', 'm3/s-m2')
-  end
- # returns the autosized maximum flow fraction during reheat as an optional double
-  def autosizedMaximumFlowFractionDuringReheat
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow Fraction during Reheat', '')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.AirTermSnglDuctVAVReheat.rb DELETED Viewed

@@ -1,68 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::AirTerminalSingleDuctVAVReheat
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.AirTerminalSingleDuctVAVReheat", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_flow_rate = self.autosizedMaximumAirFlowRate
-    if rated_flow_rate.is_initialized
-      self.setMaximumAirFlowRate(rated_flow_rate.get)
-    end
-    maximum_hot_water_or_steam_flow_rate = self.autosizedMaximumHotWaterOrSteamFlowRate
-    if maximum_hot_water_or_steam_flow_rate.is_initialized
-      self.setMaximumHotWaterOrSteamFlowRate(maximum_hot_water_or_steam_flow_rate.get)
-    end
-    maximum_flow_per_zone_floor_area_during_reheat = self.autosizedMaximumFlowPerZoneFloorAreaDuringReheat
-    if maximum_flow_per_zone_floor_area_during_reheat.is_initialized
-      self.setMaximumFlowPerZoneFloorAreaDuringReheat(maximum_flow_per_zone_floor_area_during_reheat.get)
-    end
-    maximum_flow_fraction_during_reheat = self.autosizedMaximumFlowFractionDuringReheat
-    if maximum_flow_fraction_during_reheat.is_initialized
-      self.setMaximumFlowFractionDuringReheat(maximum_flow_fraction_during_reheat.get)
-    end
-  end
-  # returns the autosized maximum air flow rate as an optional double
-  def autosizedMaximumAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated power consumption as an optional double
-  def autosizedMaximumHotWaterOrSteamFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Reheat Water Flow Rate', 'm3/s')
-  end
- # returns the autosized maximum flow per zone floor area during reheat as an optional double
-  def autosizedMaximumFlowPerZoneFloorAreaDuringReheat
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow per Zone Floor Area during Reheat', 'm3/s-m2')
-  end
- # returns the autosized maximum flow fraction during reheat as an optional double
-  def autosizedMaximumFlowFractionDuringReheat
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow Fraction during Reheat', '')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.BoilerHotWater.rb DELETED Viewed

@@ -1,42 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::BoilerHotWater
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.BoilerHotWater", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    nominal_capacity = self.autosizedNominalCapacity
-    if nominal_capacity.is_initialized
-      self.setNominalCapacity(nominal_capacity.get)
-    end
-    design_water_flow_rate = self.autosizedDesignWaterFlowRate
-    if design_water_flow_rate.is_initialized
-      self.setDesignWaterFlowRate(design_water_flow_rate.get)
-    end
-  end
-  # returns the autosized nominal capacity as an optional double
-  def autosizedNominalCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Nominal Capacity', 'W')
-  end
-  # returns the autosized design water flow rate as an optional double
-  def autosizedDesignWaterFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Design Water Flow Rate', 'm3/s')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.BoilerSteam.rb DELETED Viewed

@@ -1,27 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::BoilerSteam
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.BoilerSteam", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.BoilerSteam", ".applySizingValues not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # returns the autosized design supply air flow rate as an optional double
-  # def autosizedDesignSupplyAirFlowRate
-    # return self.model.getAutosizedValue(self, 'Design Supply Air Flow Rate', 'm3/s')
-  # end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.ChillerElectricEIR.rb DELETED Viewed

@@ -1,58 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::ChillerElectricEIR
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.ChillerElectricEIR", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    reference_chilled_water_flow_rate = self.autosizedReferenceChilledWaterFlowRate
-    if reference_chilled_water_flow_rate.is_initialized
-      self.setReferenceChilledWaterFlowRate(reference_chilled_water_flow_rate.get)
-    end
-    reference_capacity = self.autosizedReferenceCapacity
-    if reference_capacity.is_initialized
-      self.setReferenceCapacity(reference_capacity.get)
-    end
-    # Only try to find the condenser water flow rate if this chiller
-    # is a water cooled chiller connected to a condenser loop.
-    if self.secondaryPlantLoop.is_initialized
-      reference_condenser_fluid_flow_rate = self.autosizedReferenceCondenserFluidFlowRate
-      if reference_condenser_fluid_flow_rate.is_initialized
-        self.setReferenceCondenserFluidFlowRate(reference_condenser_fluid_flow_rate.get)
-      end
-    end
-  end
-  # returns the autosized chilled water flow rate as an optional double
-  def autosizedReferenceChilledWaterFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Reference Chilled Water Flow Rate', 'm3/s')
-  end
-  # returns the autosized reference capacity as an optional double
-  def autosizedReferenceCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Reference Capacity', 'W')
-  end
-  # returns the autosized reference condenser fluid flow rate as an optional double
-  def autosizedReferenceCondenserFluidFlowRate
-    return self.model.getAutosizedValue(self, 'User-Specified Reference Condenser Water Flow Rate', 'm3/s')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoilCoolingDXMultiSpeed.rb DELETED Viewed

@@ -1,171 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoilCoolingDXMultiSpeed
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    autosizeSpeed1GrossRatedTotalCoolingCapacity
-    autosizeSpeed2GrossRatedTotalCoolingCapacity
-    autosizeSpeed3GrossRatedTotalCoolingCapacity
-    autosizeSpeed4GrossRatedTotalCoolingCapacity
-    autosizeSpeed1GrossRatedSensibleHeatRatio
-    autosizeSpeed2GrossRatedSensibleHeatRatio
-    autosizeSpeed3GrossRatedSensibleHeatRatio
-    autosizeSpeed4GrossRatedSensibleHeatRatio
-    autosizeSpeed1RatedAirFlowRate
-    autosizeSpeed2RatedAirFlowRate
-    autosizeSpeed3RatedAirFlowRate
-    autosizeSpeed4RatedAirFlowRate
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_speed1_rated_total_cooling_capacity = self.autosizedSpeed1GrossRatedTotalCoolingCapacity
-    if rated_speed1_rated_total_cooling_capacity.is_initialized
-      self.setSpeed1GrossRatedTotalCoolingCapacity(rated_speed1_rated_total_cooling_capacity.get)
-    end
-    rated_speed2_rated_total_cooling_capacity = self.autosizedSpeed2GrossRatedTotalCoolingCapacity
-    if rated_speed2_rated_total_cooling_capacity.is_initialized
-      self.setSpeed2GrossRatedTotalCoolingCapacity(rated_speed2_rated_total_cooling_capacity.get)
-    end
-    rated_speed3_rated_total_cooling_capacity = self.autosizedSpeed3GrossRatedTotalCoolingCapacity
-    if rated_speed3_rated_total_cooling_capacity.is_initialized
-      self.setSpeed3GrossRatedTotalCoolingCapacity(rated_speed3_rated_total_cooling_capacity.get)
-    end
-    rated_speed4_rated_total_cooling_capacity = self.autosizedSpeed4GrossRatedTotalCoolingCapacity
-    if rated_speed4_rated_total_cooling_capacity.is_initialized
-      self.setSpeed4GrossRatedTotalCoolingCapacity(rated_speed4_rated_total_cooling_capacity.get)
-    end
-    rated_speed1_rated_sensible_heat_ratio = self.autosizedSpeed1RatedSensibleHeatRatio
-    if rated_speed1_rated_sensible_heat_ratio.is_initialized
-      self.setSpeed1RatedSensibleHeatRatio(rated_speed1_rated_sensible_heat_ratio.get)
-    end
-    rated_speed2_rated_sensible_heat_ratio = self.autosizedSpeed2RatedSensibleHeatRatio
-    if rated_speed2_rated_sensible_heat_ratio.is_initialized
-      self.setSpeed2RatedSensibleHeatRatio(rated_speed2_rated_sensible_heat_ratio.get)
-    end
-    rated_speed3_rated_sensible_heat_ratio = self.autosizedSpeed3RatedSensibleHeatRatio
-    if rated_speed3_rated_sensible_heat_ratio.is_initialized
-      self.setSpeed3RatedSensibleHeatRatio(rated_speed3_rated_sensible_heat_ratio.get)
-    end
-    rated_speed4_rated_sensible_heat_ratio = self.autosizedSpeed4RatedSensibleHeatRatio
-    if rated_speed4_rated_sensible_heat_ratio.is_initialized
-      self.setSpeed4RatedSensibleHeatRatio(rated_speed4_rated_sensible_heat_ratio.get)
-    end
-    rated_speed1_rated_air_flow_rate = self.autosizedSpeed1RatedAirFlowRate
-    if rated_speed1_rated_air_flow_rate.is_initialized
-      self.setSpeed1RatedAirFlowRate(rated_speed1_rated_air_flow_rate.get)
-    end
-    rated_speed2_rated_air_flow_rate = self.autosizedSpeed2RatedAirFlowRate
-    if rated_speed2_rated_air_flow_rate.is_initialized
-      self.setSpeed2RatedAirFlowRate(rated_speed2_rated_air_flow_rate.get)
-    end
-    rated_speed3_rated_air_flow_rate = self.autosizedSpeed3RatedAirFlowRate
-    if rated_speed3_rated_air_flow_rate.is_initialized
-      self.setSpeed3RatedAirFlowRate(rated_speed3_rated_air_flow_rate.get)
-    end
-    rated_speed4_rated_air_flow_rate = self.autosizedSpeed4RatedAirFlowRate
-    if rated_speed4_rated_air_flow_rate.is_initialized
-      self.setSpeed4RatedAirFlowRate(rated_speed4_rated_air_flow_rate.get)
-    end
-  end
-  # returns the autosized rated total cooling capacity for stage 1 as an optional double
-  def autosizedSpeed1GrossRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self,'Design Size Speed 1 Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated total cooling capacity for stage 2 as an optional double
-  def autosizedSpeed2GrossRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self,'Design Size Speed 2 Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated total cooling capacity for stage 3 as an optional double
-  def autosizedSpeed3GrossRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self,'Design Size Speed 3 Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated total cooling capacity for stage 4 as an optional double
-  def autosizedSpeed4GrossRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self,'Design Size Speed 4 Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated sensible heat ratio for stage 1 as an optional double
-  def autosizedSpeed1RatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self,'Design Size Speed 1 Rated Sensible Heat Ratio', '')
-  end
-  # returns the autosized rated sensible heat ratio for stage 2 as an optional double
-  def autosizedSpeed2RatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self,'Design Size Speed 2 Rated Sensible Heat Ratio', '')
-  end
-  # returns the autosized rated sensible heat ratio for stage 3 as an optional double
-  def autosizedSpeed3RatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self,'Design Size Speed 3 Rated Sensible Heat Ratio', '')
-  end
-  # returns the autosized rated sensible heat ratio for stage 4 as an optional double
-  def autosizedSpeed4RatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self,'Design Size Speed 4 Rated Sensible Heat Ratio', '')
-  end
-  # returns the autosized rated air flow rate for stage 1 as an optional double
-  def autosizedSpeed1RatedAirFlowRate
-    return self.model.getAutosizedValue(self,'Design Size Speed 1 Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated air flow rate for stage 2 as an optional double
-  def autosizedSpeed2RatedAirFlowRate
-    return self.model.getAutosizedValue(self,'Design Size Speed 2 Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated air flow rate for stage 3 as an optional double
-  def autosizedSpeed3RatedAirFlowRate
-    return self.model.getAutosizedValue(self,'Design Size Speed 3 Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated air flow rate for stage 4 as an optional double
-  def autosizedSpeed4RatedAirFlowRate
-    return self.model.getAutosizedValue(self,'Design Size Speed 4 Rated Air Flow Rate', 'm3/s')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoilCoolingDXSingleSpeed.rb DELETED Viewed

@@ -1,56 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoilCoolingDXSingleSpeed
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeRatedTotalCoolingCapacity
-    self.autosizeRatedSensibleHeatRatio
-    self.autosizeRatedAirFlowRate
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_air_flow_rate = self.autosizedRatedAirFlowRate
-    if rated_air_flow_rate.is_initialized
-      self.setRatedAirFlowRate(rated_air_flow_rate.get)
-    end
-    rated_total_cooling_capacity = self.autosizedRatedTotalCoolingCapacity
-    if rated_total_cooling_capacity.is_initialized
-      self.setRatedTotalCoolingCapacity(rated_total_cooling_capacity.get)
-    end
-    rated_sensible_heat_ratio = self.autosizedRatedSensibleHeatRatio
-    if rated_sensible_heat_ratio.is_initialized
-      self.setRatedSensibleHeatRatio(rated_sensible_heat_ratio.get)
-    end
-  end
-  # returns the autosized rated air flow rate as an optional double
-  def autosizedRatedAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated total cooling capacity as an optional double
-  def autosizedRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated sensible heat ratio as an optional double
-  def autosizedRatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self, 'Design Size Gross Rated Sensible Heat Ratio', '')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoilCoolingDXTwoSpeed.rb DELETED Viewed

@@ -1,89 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoilCoolingDXTwoSpeed
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.CoilCoolingDXTwoSpeed", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_high_speed_air_flow_rate = self.autosizedRatedHighSpeedAirFlowRate
-    if rated_high_speed_air_flow_rate.is_initialized
-      self.setRatedHighSpeedAirFlowRate(rated_high_speed_air_flow_rate)
-    end
-    rated_high_speed_total_cooling_capacity = self.autosizedRatedHighSpeedTotalCoolingCapacity
-    if rated_high_speed_total_cooling_capacity.is_initialized
-      self.setRatedHighSpeedTotalCoolingCapacity(rated_high_speed_total_cooling_capacity)
-    end
-    rated_high_speed_sensible_heat_ratio = self.autosizedRatedHighSpeedSensibleHeatRatio
-    if rated_high_speed_sensible_heat_ratio.is_initialized
-      self.setRatedHighSpeedSensibleHeatRatio(rated_high_speed_sensible_heat_ratio)
-    end
-    rated_low_speed_air_flow_rate = self.autosizedRatedLowSpeedAirFlowRate
-    if rated_low_speed_air_flow_rate.is_initialized
-      self.setRatedLowSpeedAirFlowRate(rated_low_speed_air_flow_rate)
-    end
-    rated_low_speed_total_cooling_capacity = self.autosizedRatedLowSpeedTotalCoolingCapacity
-    if rated_low_speed_total_cooling_capacity.is_initialized
-      self.setRatedLowSpeedTotalCoolingCapacity(rated_low_speed_total_cooling_capacity)
-    end
-    rated_low_speed_sensible_heat_ratio = self.autosizedRatedLowSpeedSensibleHeatRatio
-    if rated_low_speed_sensible_heat_ratio.is_initialized
-      self.setRatedLowSpeedSensibleHeatRatio(rated_low_speed_sensible_heat_ratio)
-    end
-  end
-  # returns the autosized rated high speed air flow rate as an optional double
-  def autosizedRatedHighSpeedAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size High Speed Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated high speed total cooling capacity as an optional double
-  def autosizedRatedHighSpeedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self, 'Design Size High Speed Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated high speed sensible heat ratio as an optional double
-  def autosizedRatedHighSpeedSensibleHeatRatio
-    return self.model.getAutosizedValue(self, 'Design Size High Speed Rated Sensible Heat Ratio', '')
-  end
-  # returns the autosized rated low speed air flow rate as an optional double
-  def autosizedRatedLowSpeedAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Low Speed Rated Air Flow Rate', 'm3/s')
-  end
-  # returns the autosized rated low speed total cooling capacity as an optional double
-  def autosizedRatedLowSpeedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Low Speed Gross Rated Total Cooling Capacity', 'W')
-  end
-  # returns the autosized rated low speed sensible heat ratio as an optional double
-  def autosizedRatedLowSpeedSensibleHeatRatio
-    return self.model.getAutosizedValue(self, 'Design Size Low Speed Gross Rated Sensible Heat Ratio', '')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoilCoolingDXVariableRefrigerantFlow.rb DELETED Viewed

@@ -1,50 +0,0 @@
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoilCoolingDXVariableRefrigerantFlow
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizedRatedTotalCoolingCapacity
-    self.autosizeRatedAirFlowRate
-    self.autosizeRatedSensibleHeatRatio
-  end
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    rated_air_flow_rate = self.autosizedRatedAirFlowRate
-    if rated_air_flow_rate.is_initialized
-      self.setRatedAirFlowRate(rated_air_flow_rate.get)
-    end
-    rated_total_cooling_capacity = self.autosizedRatedTotalCoolingCapacity
-    if rated_total_cooling_capacity.is_initialized
-      self.setRatedTotalCoolingCapacity(rated_total_cooling_capacity.get)
-    end
-    rated_sensible_heat_ratio = self.autosizedRatedSensibleHeatRatio
-    if rated_sensible_heat_ratio.is_initialized
-      self.setRatedSensibleHeatRatio(rated_sensible_heat_ratio.get)
-    end
-  end
-  # Design Size Rated Air Flow Rate as an optional double
-  def autosizedRatedTotalCoolingCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Rated Air Flow Rate', 'm3/s')
-  end
-  # Design Size Gross Rated Total Cooling Capacity as an optional double
-  def autosizedRatedAirFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Gross Rated Total Cooling Capacity', 'W')
-  end
-  # Design Size Gross Rated Sensible Heat Ratio as an optional double
-  def autosizedRatedSensibleHeatRatio
-    return self.model.getAutosizedValue(self, 'Design Size Gross Rated Sensible Heat Ratio', '')
-  end
-end