openstudio-model-articulation 0.4.0 → 0.6.1
Sign up to get free protection for your applications and to get access to all the features.
- checksums.yaml +4 -4
- data/.rubocop.yml +2 -1
- data/CHANGELOG.md +24 -0
- data/Gemfile +2 -2
- data/README.md +22 -3
- data/lib/measures/AssignConstructionSetToBuilding/measure.xml +10 -10
- data/lib/measures/AssignSpaceTypeBySpaceName/measure.xml +27 -9
- data/lib/measures/AssignSpaceTypeToBuilding/measure.xml +10 -10
- data/lib/measures/AssignSpacesToStories/measure.rb +2 -4
- data/lib/measures/AssignSpacesToStories/measure.xml +10 -10
- data/lib/measures/BarAspectRatioStudy/measure.rb +2 -1
- data/lib/measures/BarAspectRatioStudy/measure.xml +4 -4
- data/lib/measures/CleanupSpaceOrigins/measure.rb +3 -0
- data/lib/measures/CleanupSpaceOrigins/measure.xml +10 -10
- data/lib/measures/FindAndReplaceObjectNames/measure.xml +8 -8
- data/lib/measures/InjectOsmGeometryIntoAnExternalIdf/measure.rb +2 -2
- data/lib/measures/InjectOsmGeometryIntoAnExternalIdf/measure.xml +22 -4
- data/lib/measures/RemoveHardAssignedConstructions/measure.xml +8 -8
- data/lib/measures/RenameSpaceSurfacesBasedonParentSpaceandOrientation/measure.xml +37 -7
- data/lib/measures/RotateBuilding/measure.xml +8 -8
- data/lib/measures/SetExtWallToGroundBoundaryConditionByStory/measure.xml +13 -7
- data/lib/measures/SetInteriorWallsAndFloorsToAdiabatic/measure.rb +1 -1
- data/lib/measures/SetInteriorWallsAndFloorsToAdiabatic/measure.xml +10 -10
- data/lib/measures/SetInteriorWallsToSelectedConstruction/measure.rb +1 -1
- data/lib/measures/SetInteriorWallsToSelectedConstruction/measure.xml +10 -10
- data/lib/measures/SetWindowToWallRatioByFacade/README.md +11 -0
- data/lib/measures/SetWindowToWallRatioByFacade/measure.rb +90 -142
- data/lib/measures/SetWindowToWallRatioByFacade/measure.xml +32 -11
- data/lib/measures/SetWindowToWallRatioByFacade/resources/functions.rb +176 -0
- data/lib/measures/SimplifyGeometryToSlicedBar/measure.rb +8 -4
- data/lib/measures/SimplifyGeometryToSlicedBar/measure.xml +31 -13
- data/lib/measures/SimplifyGeometryToSlicedBar/resources/os_lib_cofee.rb +6 -4
- data/lib/measures/SimplifyGeometryToSlicedBar/resources/os_lib_geometry.rb +13 -8
- data/lib/measures/SimplifyGeometryToSlicedBar/resources/os_lib_helper_methods.rb +2 -4
- data/lib/measures/SpaceTypeAndConstructionSetWizard/measure.rb +1 -1
- data/lib/measures/SpaceTypeAndConstructionSetWizard/measure.xml +4 -4
- data/lib/measures/SurfaceMatching/measure.rb +1 -0
- data/lib/measures/SurfaceMatching/measure.xml +10 -10
- data/lib/measures/add_empd_material_properties/LICENSE.md +27 -0
- data/lib/measures/add_empd_material_properties/README.md +116 -0
- data/lib/measures/add_empd_material_properties/README.md.erb +42 -0
- data/lib/measures/add_empd_material_properties/docs/.gitkeep +0 -0
- data/lib/measures/add_empd_material_properties/measure.rb +247 -0
- data/lib/measures/add_empd_material_properties/measure.xml +201 -0
- data/lib/measures/blended_space_type_from_floor_area_ratios/measure.rb +4 -3
- data/lib/measures/blended_space_type_from_floor_area_ratios/measure.xml +4 -4
- data/lib/measures/blended_space_type_from_model/{resources → docs}/replace_occupied_spaces_with_blended_space_type_design_doc.txt +0 -0
- data/lib/measures/blended_space_type_from_model/measure.rb +11 -3
- data/lib/measures/blended_space_type_from_model/measure.xml +15 -21
- data/lib/measures/clone_building_from_external_model/measure.xml +3 -3
- data/lib/measures/create_DOE_prototype_building/measure.rb +2 -2
- data/lib/measures/create_DOE_prototype_building/measure.xml +442 -438
- data/lib/measures/create_and_assign_thermal_zones_for_unassigned_spaces/measure.xml +3 -3
- data/lib/measures/create_bar_from_building_type_ratios/README.md +109 -35
- data/lib/measures/create_bar_from_building_type_ratios/README.md.erb +54 -35
- data/lib/measures/create_bar_from_building_type_ratios/measure.rb +8 -3
- data/lib/measures/create_bar_from_building_type_ratios/measure.xml +12 -12
- data/lib/measures/create_bar_from_deer_building_type_ratios/README.md +301 -79
- data/lib/measures/create_bar_from_deer_building_type_ratios/README.md.erb +62 -79
- data/lib/measures/create_bar_from_deer_building_type_ratios/measure.rb +9 -4
- data/lib/measures/create_bar_from_deer_building_type_ratios/measure.xml +15 -59
- data/lib/measures/create_bar_from_doe_building_type_ratios/README.md +298 -57
- data/lib/measures/create_bar_from_doe_building_type_ratios/README.md.erb +54 -57
- data/lib/measures/create_bar_from_doe_building_type_ratios/measure.rb +9 -4
- data/lib/measures/create_bar_from_doe_building_type_ratios/measure.xml +12 -16
- data/lib/measures/create_bar_from_model/measure.rb +10 -6
- data/lib/measures/create_bar_from_model/measure.xml +4 -4
- data/lib/measures/create_bar_from_space_type_ratios/README.md +94 -42
- data/lib/measures/create_bar_from_space_type_ratios/README.md.erb +60 -42
- data/lib/measures/create_bar_from_space_type_ratios/measure.rb +8 -3
- data/lib/measures/create_bar_from_space_type_ratios/measure.xml +15 -15
- data/lib/measures/create_baseline_building/measure.rb +3 -2
- data/lib/measures/create_baseline_building/measure.xml +4 -4
- data/lib/measures/create_deer_prototype_building/measure.xml +3 -3
- data/lib/measures/create_parametric_schedules/measure.rb +15 -10
- data/lib/measures/create_parametric_schedules/measure.xml +4 -4
- data/lib/measures/create_typical_building_from_model/README.md +81 -16
- data/lib/measures/create_typical_building_from_model/README.md.erb +36 -16
- data/lib/measures/create_typical_building_from_model/measure.rb +6 -1
- data/lib/measures/create_typical_building_from_model/measure.xml +19 -19
- data/lib/measures/create_typical_deer_building_from_model/README.md +173 -53
- data/lib/measures/create_typical_deer_building_from_model/README.md.erb +57 -53
- data/lib/measures/create_typical_deer_building_from_model/measure.rb +7 -2
- data/lib/measures/create_typical_deer_building_from_model/measure.xml +26 -26
- data/lib/measures/create_typical_doe_building_from_model/README.md +182 -44
- data/lib/measures/create_typical_doe_building_from_model/README.md.erb +58 -44
- data/lib/measures/create_typical_doe_building_from_model/measure.rb +7 -2
- data/lib/measures/create_typical_doe_building_from_model/measure.xml +26 -26
- data/lib/measures/deer_space_type_and_construction_set_wizard/measure.rb +1 -1
- data/lib/measures/deer_space_type_and_construction_set_wizard/measure.xml +4 -4
- data/lib/measures/find_and_replace_in_all_thermal_zone_names/measure.xml +3 -3
- data/lib/measures/make_shading_surfaces_based_on_zone_multipliers/measure.rb +2 -0
- data/lib/measures/make_shading_surfaces_based_on_zone_multipliers/measure.xml +4 -4
- data/lib/measures/merge_floorspace_js_with_model/measure.rb +4 -1
- data/lib/measures/merge_floorspace_js_with_model/measure.xml +4 -4
- data/lib/measures/merge_spaces_from_external_file/measure.xml +3 -3
- data/lib/measures/radiance_measure/measure.rb +62 -56
- data/lib/measures/radiance_measure/measure.xml +4 -4
- data/lib/measures/radiant_slab_with_doas/measure.rb +8 -1
- data/lib/measures/radiant_slab_with_doas/measure.xml +9 -9
- data/lib/measures/replace_geometry_by_story/measure.rb +4 -0
- data/lib/measures/replace_geometry_by_story/measure.xml +4 -4
- data/lib/measures/scale_geometry/measure.xml +3 -3
- data/lib/openstudio/model_articulation/version.rb +1 -1
- data/openstudio-model-articulation.gemspec +2 -2
- metadata +15 -9
- data/lib/measures/blended_space_type_from_model/resources/os_lib_model_simplification.rb +0 -1049
@@ -12,33 +12,34 @@
|
|
12
12
|
## Measure Type
|
13
13
|
<%= measureType %>
|
14
14
|
|
15
|
-
[//]: # (
|
16
|
-
|
17
|
-
|
15
|
+
[//]: # (Only finds value if taxonomy method is added to measure.rb, won't read out of measure.xml)
|
16
|
+
## Taxonomy
|
17
|
+
<%= taxonomy %>
|
18
18
|
|
19
19
|
___
|
20
20
|
## Table of Contents
|
21
21
|
- [Measure Overview](#measure-overview)<br/>
|
22
22
|
- [DOE and DEER Template and Building Type Mapping](#doe-and-deer-template-and-building-type-mapping)<br/>
|
23
|
-
- [
|
24
|
-
- [
|
25
|
-
- [
|
26
|
-
- [
|
27
|
-
- [
|
28
|
-
- [
|
29
|
-
- [
|
23
|
+
- [Functionality and Input Overview](#functionality-and-input-overview)<br/>
|
24
|
+
- [Space Type Ratios](#space-type-ratio)<br/>
|
25
|
+
- [Floor Area](#floor-area)<br/>
|
26
|
+
- [Height, Stories, and Orientation](#height-stories-and-orientation)<br/>
|
27
|
+
- [Building Shape](#building-shape)<br/>
|
28
|
+
- [Window to Wall Ratio](#window-to-wall-ratio)<br/>
|
29
|
+
- [Party Walls and Exposure of Top and Bottom Stories](#party-walls-and-exposure-of-top-and-bottom-stories)<br/>
|
30
|
+
- [Calculation Methods and Articulation Logic](#calculation-methods-and-articulation-logic)<br/>
|
30
31
|
- [Development Comments](#development-comments)<br/>
|
31
32
|
- [Automatically Generated Argument List](#arguments)<br/>
|
32
33
|
|
33
34
|
## Measure Overview
|
34
35
|
|
35
|
-
The intent of this measure is to create basic geometry given a mix of building types and high level characteristics about the building envelope like the number of stories, aspect ratio, orientation etc. This will result in one or more rectangular building elements. The spaces will have stub space type assignments but will not have any internal loads or and the surfaces will not have constructions. The stub space type ratios are based on DOE
|
36
|
+
The intent of this measure is to create basic geometry given a mix of building types and high level characteristics about the building envelope like the number of stories, aspect ratio, orientation etc. This will result in one or more rectangular building elements. The spaces will have stub space type assignments but will not have any internal loads or and the surfaces will not have constructions. The stub space type ratios are based on DOE prototype buildings, depending on the building type you select. The typical workflow is to run other measures after this measure that populate the stub space types and other model elements. This measure has more than 30 arguments and can look intimidating, but all of them have defaults, so it will run properly without you changing any arguments; however at a minimum you will typically want to at least choose the primary building type, building floor area, and number of stories above grade. Make use of additional arguments as you have a need to.
|
36
37
|
|
37
|
-
This is generally meant to run on an empty model, but it does not
|
38
|
+
This is generally meant to run on an empty model, but it does not actively delete any geometry or objects that may already be in the model.
|
38
39
|
|
39
40
|
## DOE and DEER Template and Building Type Mapping
|
40
41
|
|
41
|
-
Note, that this particular measure has access to both DOE and DEER building types
|
42
|
+
Note, that this particular measure has access to both DOE and DEER building types and templates (vintages). It is important when using this measure that the template and the selected building type(s) are all DOE or are all DEER. Below is a list of for each.
|
42
43
|
|
43
44
|
#### DOE
|
44
45
|
- Templates:
|
@@ -48,8 +49,16 @@ Note, that this particular measure has access to both DOE and DEER building type
|
|
48
49
|
- 90.1-2007
|
49
50
|
- 90.1-2010
|
50
51
|
- 90.1-2013
|
52
|
+
- 90.1-2016
|
53
|
+
- 90.1-2019
|
51
54
|
- NREL ZNE Ready 2017 (not currently complete for all building types)
|
52
|
-
-
|
55
|
+
- ComStock DOE Ref Pre-1980
|
56
|
+
- ComStock DOE Ref 1980-2004
|
57
|
+
- ComStock 90.1-2004
|
58
|
+
- ComStock 90.1-2007
|
59
|
+
- ComStock 90.1-2010
|
60
|
+
- ComStock 90.1-2013
|
61
|
+
- Building Types:
|
53
62
|
- SecondarySchool
|
54
63
|
- PrimarySchool
|
55
64
|
- SmallOffice
|
@@ -67,6 +76,11 @@ Note, that this particular measure has access to both DOE and DEER building type
|
|
67
76
|
- Hospital
|
68
77
|
- Outpatient
|
69
78
|
- SuperMarket
|
79
|
+
- Laboratory
|
80
|
+
- LargeDataCenterLowITE
|
81
|
+
- LargeDataCenterHighITE
|
82
|
+
- SmallDataCenterLowITE
|
83
|
+
- SmallDataCenterHighITE
|
70
84
|
|
71
85
|
#### DEER
|
72
86
|
- Templates:
|
@@ -129,7 +143,7 @@ Note, that this particular measure has access to both DOE and DEER building type
|
|
129
143
|
|
130
144
|
While Create Bar from Building Type Ratios pulls in a pre-determined list and ratios of space types for each building type, this measures allows the modeler to bring in any combination of space types from multiple building types. The main limitation is that the space types need to come from the same OpenStudio Standards Template. You can't mix spaces from DOE and DEER or a space type that is unique to DOE Ref Pre-1980 and another space type unique to ASHRAE 90.1 2013.
|
131
145
|
|
132
|
-
The string is setup like a hash where the key is a concatenated BuildingType
|
146
|
+
The string is setup like a hash where the key is a concatenated BuildingType SpaceType combination separated by a vertical pipe and spaces " | ". Then a separator is added before the fractional value that looks like " => ". Spaces in the string are optional except for the one after the comma that is necessary. The space type ratio fractional values should add up to 1.0.
|
133
147
|
|
134
148
|
Below are a few example use cases for this measure
|
135
149
|
- If you want to use a space types from a prototype model but want to use a different mix of space types than the prototype building, which is generally where space type ratios in Create Bar from Building Type Ratios come from.
|
@@ -139,7 +153,7 @@ Below are a few example use cases for this measure
|
|
139
153
|
|
140
154
|
#### Floor Area
|
141
155
|
|
142
|
-
The typical use case for this measure is to set the total building floor area using the `Total Building Floor Area` argument. With this approach you can maintain a set building floor area while changing the number of stories. An alternate workflow is to set a static footprint area. This alternate workflow is enabled by
|
156
|
+
The typical use case for this measure is to set the total building floor area using the `Total Building Floor Area` argument. With this approach you can maintain a set building floor area while changing the number of stories. An alternate workflow is to set a static footprint area. This alternate workflow is enabled by setting a non-zero value for the `Single Floor Area` argument.
|
143
157
|
|
144
158
|
[//]: # (todo - add screenshot of same floor area on different num stories and shapes)
|
145
159
|
|
@@ -147,7 +161,7 @@ The typical use case for this measure is to set the total building floor area us
|
|
147
161
|
|
148
162
|
The Floor to floor height for the building is controlled through the `Typical Floor to FLoor Height` argument. It is the first of a number of arguments where a value of 0 represents a **smart default**. If leave the default value of zero in place it will pick a building specific floor to floor height. For example 9' would be picked for a small hotel and 14' for a hospital.
|
149
163
|
|
150
|
-
Some building types have space type specific definitions for height that can be enabled with the `Enable Custom Height Bar Application` argument. If I building doesn't have any custom heights defined the value of this argument will not matter. One example of where this argument would have an impact is for the gym and
|
164
|
+
Some building types have space type specific definitions for height that can be enabled with the `Enable Custom Height Bar Application` argument. If I building doesn't have any custom heights defined the value of this argument will not matter. One example of where this argument would have an impact is for the gym and auditorium in the SecondarySchool which would have a height 26' instead of the default school height of 13'. This is accomplished by pulling space types with a custom height into a separate rectangular building that sits away from the main structure. If this argument is set to false then all of the space types will have the same height, which for the school would be the default of 13'
|
151
165
|
|
152
166
|
![No Custom Height Space Types](./docs/custom_height_false.png?raw=true)
|
153
167
|
*Secondary school without custom space type heights enabled*
|
@@ -160,11 +174,11 @@ There are two arguments that control the number of stories the building has. `Nu
|
|
160
174
|
![Baesment](./docs/basement.png?raw=true)
|
161
175
|
*Secondary school with 1 below grade story*
|
162
176
|
|
163
|
-
The `Building Rotation` argument will rotate the building after the geometry is created. So if you for example make a bar oriented east/west and then rotate it 80 degrees, the end result will be a bar just off of being north/south orientation. A positive value rotates clockwise. If you had a party wall assigned to the south facade, after the 80 degree rotation, those party walls would not be 10
|
177
|
+
The `Building Rotation` argument will rotate the building after the geometry is created. So if you for example make a bar oriented east/west and then rotate it 80 degrees, the end result will be a bar just off of being north/south orientation. A positive value rotates clockwise. If you had a party wall assigned to the south facade, after the 80 degree rotation, those party walls would not be 10 degrees south of due west.
|
164
178
|
|
165
179
|
#### Template
|
166
180
|
|
167
|
-
The `Template` is
|
181
|
+
The `Template` is used in OpenStudio measures and the OpenStudio standards gem to refer to a specific target building code standard or vintage. For example ASHRAE 90.1 2004 or the DOE Ref Pre-1980 vintage used for the DOE reference buildings. Template is used here along with the building types selected to define the list and ratios of space types in the model. While generally the space type ratio is the same across different templates there are exceptions to this such as the inclusion of data centers in newer LargeOffice buildings.
|
168
182
|
|
169
183
|
#### Building Shape
|
170
184
|
|
@@ -174,12 +188,12 @@ While the floor area and number of stories arguments determine the size of the b
|
|
174
188
|
*Aspect Ratio of 2.0*
|
175
189
|
|
176
190
|
![Aspect Ratio 1.0](./docs/ar_1.png?raw=true)
|
177
|
-
*Aspect Ratio of
|
191
|
+
*Aspect Ratio of 1.0*
|
178
192
|
|
179
193
|
![Aspect Ratio 0.5](./docs/ar_05.png?raw=true)
|
180
194
|
*Aspect Ratio of 0.5*
|
181
195
|
|
182
|
-
The `Perimeter Multiplier` provides a mechanism to maintain your target footprint floor area and your target aspect ratio while increasing the total exterior perimeter exposure. The intent here is to support, in a simplified way, the impacts of non-rectangular buildings. This is accomplished by adding a second bar when necessary that is turned 90 degrees relative ot the primary bar but maintains the same width. These two building elements are separate from each other and from the custom height bar, if it exists. If you keep the default value of 0.0 the measure will lookup a value inferred from the prototype
|
196
|
+
The `Perimeter Multiplier` provides a mechanism to maintain your target footprint floor area and your target aspect ratio while increasing the total exterior perimeter exposure. The intent here is to support, in a simplified way, the impacts of non-rectangular buildings. This is accomplished by adding a second bar when necessary that is turned 90 degrees relative ot the primary bar but maintains the same width. These two building elements are separate from each other and from the custom height bar, if it exists. If you keep the default value of 0.0 the measure will lookup a value inferred from the prototype building. For most prototype building types this will result in a value of 1.0, because the buildings are rectangular, but for PrimarySchool, SecondarySchool, and Outpatient a value larger than 1.0 will be used. If you use or a smart default of 1.0 applied for this argument you get a single bar. As you increase the multiplier higher than 1.0 it will add a second bar to increase the building perimeter while maintaining both the floor area and the north south to east west aspect ratio. Below is an example of the calculation method. If you use a very small multiplier such as 1.05, a situation may exist that would have too small of a secondary bar to properly model. In this case the single bar will just be extended a bit to achieve the target total perimeter, but will sacrifice meeting the requested north/south versus east/west aspect ratio. In some cases with when the multiplier is not high enough above 1 the ends of the secondary bar may be made adiabatic to achieve target values.
|
183
197
|
|
184
198
|
![Perim Mult b](./docs/perim_mult_2012.png?raw=true)
|
185
199
|
*Aspect Ratio of 2.0 with a Perimeter Multiplier of 1.2. Able to add second bar but needs to have adiabatic ends. See earlier screenshot for Aspect Ratio of 2.0 with Perimeter Multiplier of 1.0*
|
@@ -188,15 +202,15 @@ The `Perimeter Multiplier` provides a mechanism to maintain your target footprin
|
|
188
202
|
*Aspect Ratio of 2.0 with a Perimeter Multiplier of 2.0.*
|
189
203
|
|
190
204
|
`Perimeter Multiplier` example use case:
|
191
|
-
|
192
|
-
|
193
|
-
|
205
|
+
- inputs are for a 10,000 ft^2 2 story building with an aspect ratio of
|
206
|
+
- With a `Perimeter Multiplier` of one this would result in a single bar that is 50' by 100'. This would have a total perimeter of 300'
|
207
|
+
- With a `Perimeter Multiplier` of 1.5 the target perimeter value will be increased to 450'. This would result in two bar elements that have a combined footprint area of 5000 ft^2 (per story) and a combined perimeter of 450'.
|
194
208
|
|
195
|
-
|
209
|
+
Representing for example a U shaped footprint (which might have a "Perimeter Multiplier" of 3 or higher) with a single bar would either under-estimate the perimeter if a reduced bounding box was fit around it to match the area, or over skew the orientation if a single long skinny bar was created with almost all of the exposure in only two opposing cardinal directions. A more common term that could have been used for an argument would have been a 1building perimeter to floor area ratio(P/A)`. That was considered but there could have been incompatible inputs passed in where the target P/A isn't possible for the given footprint area and aspect ratio. A 100' square has a P/A of 0.04 while a 1000' square has a ratio 0.004. In addition to changing with size it would also change with the shape of the rectangle. This measure in uses the multiplier to increase the perimeter of the foorprint(s) given a specified area and aspect ratio above the minim possible rectangular perimeter value. If you just want to make a single bar, you can leave the value at 1.0 and not worry about it. As a last note, if you also are using a custom height bar, that excluded from the calculation of the primary bar(s)
|
196
210
|
|
197
|
-
`Bar Width` can be specified. If you know due to the layout of your building or other factors that you have a specific building width you would like to have you can enter that in the `Bar Width` argument. `Perimeter Multiplier` will be
|
211
|
+
`Bar Width` can be specified. If you know due to the layout of your building or other factors that you have a specific building width you would like to have you can enter that in the `Bar Width` argument. `Perimeter Multiplier` will be ignored when a non-zero `Bar Width` is used. If you leave this argument value at the default value of 0 then it will not impact the model. A non-zero value here will also bypass the `Perimeter Multiplier` argument.
|
198
212
|
|
199
|
-
`Bar Separation Distance Multiplier` is used when there is more than one bar, to specify the distance between the bars as a multiple of the building height. The default value is 10 x the height of the building, but that can be customized here. Currently 0 is not a valid multiplier, since all the intersection, matching, and fenestration occur in the
|
213
|
+
`Bar Separation Distance Multiplier` is used when there is more than one bar, to specify the distance between the bars as a multiple of the building height. The default value is 10 x the height of the building, but that can be customized here. Currently 0 is not a valid multiplier, since all the intersection, matching, and fenestration occur in the individual bar elements. When two bars are required to meet the `Perimeter Multiplier` target they are in configuration of an with the vertical leg to the right of the horizontal leg, like a backwards "L". If a custom height bar was used that will be positioned to the left of the other bars.
|
200
214
|
|
201
215
|
![Sept Dist 0.5](./docs/sep_05.png?raw=true)
|
202
216
|
*Bar Separation Distance Multiplier of 0.5*
|
@@ -216,7 +230,7 @@ There is just a single `Window to Wall Ratio` argument for this measure. It has
|
|
216
230
|
![Custom WWR](./docs/wwr_custom.png?raw=true)
|
217
231
|
*Example of space type specific WWR for warehouse model, shown with custom space type height enabled*
|
218
232
|
|
219
|
-
Orientation specific characteristics and/or overhangs may be added to this in the future, but are
|
233
|
+
Orientation specific characteristics and/or overhangs may be added to this in the future, but are currently possible by adding existing measure to the workflow after this measure. Currently skylights are not directly supported either, but can be added outside of this measure.
|
220
234
|
|
221
235
|
#### Party Walls and Exposure of Top and Bottom Stories
|
222
236
|
|
@@ -226,7 +240,7 @@ There are two approaches for the party walls. One approach is a single fraction
|
|
226
240
|
|
227
241
|
The second approach is ideal when you know more about the conditions of a specific condition and allows you to enter an integer for reach cardinal direction with arguments named `Number of North facing stories with party wall` etc. You can for example have a 5 story building that has a 1 story building to the west, a 3 story building to the east, a 2 story building to the north, and exterior exposure to the south. If you are using this as part of a parametric study where number of stories is changeling and you want all of a specific facade to be adjacent to a building that is taller, You can enter an large value such as 99 for the value; the overly large value relative to number of stories in the building will not create any issues.
|
228
242
|
|
229
|
-
The ability to model what is essence party floor/ceilings in your model are controlled through two bool arguments named `Is the Bottom Story Exposed to Ground` and `Is the Top Story an Exterior Roof`
|
243
|
+
The ability to model what is in essence party floor/ceilings in your model are controlled through two bool arguments named `Is the Bottom Story Exposed to Ground` and `Is the Top Story an Exterior Roof`
|
230
244
|
|
231
245
|
![Party Wall](./docs/party.png?raw=true)
|
232
246
|
*1 story Party wall on south, 2 story on east, story multipliers not enabled*
|
@@ -239,11 +253,11 @@ The ability to model what is essence party floor/ceilings in your model are cont
|
|
239
253
|
|
240
254
|
#### Calculation Methods and Articulation Logic
|
241
255
|
|
242
|
-
- `Calculation Method for Story Multiplier` is used to determine if zone multipliers should be used as story multipliers on taller buildings. This reduces the
|
256
|
+
- `Calculation Method for Story Multiplier` is used to determine if zone multipliers should be used as story multipliers on taller buildings. This reduces the number of zones and should speed up simulations, but may not be appropriate in all cases. If you select a value of `None` then no (non 1) zone multipliers will be used and zones will be modeled for all building stories. The other choice currently available is `Basements Ground Mid Top` which for a building without party walls will never have more than 4 modeled stories regardless of the number of stories. The measure will evaluate uniqueness of stories taking into account party walls and may add additional stories to accommodate this. Note that while the size of space types on a story with a multiplier greater than 1 may appear smaller, they may be larger once the multiplier is applied. More options may be added in the future, specifically vacations of something like `Basements Ground Midx5 Top` that for very tall buildings would and multiple mid-stories vs. a single mid-story.
|
243
257
|
|
244
258
|
- `Make Mid Story Floor Surfaces Adiabatic` determines of surface intersection and surface matching should be applied between stories (when they are adjacent and capable of being matched e.g. story multiplier not used). Setting this to true can reduce the number of surfaces in the model
|
245
259
|
|
246
|
-
- `Division Method for Bar Space Types` is used to determine how the internal zoning and space type division of the bar(s) is approached. The default
|
260
|
+
- `Division Method for Bar Space Types` is used to determine how the internal zoning and space type division of the bar(s) is approached. The default value of `Multiple Space Types - Individual Stories Sliced` is the primary method that should be used. It creates what looks like a core and perimeter model, but slices it up by space type, with large space types moving towards the upper stories. There is some basic logic to minimize small slivers of a space type being created that would create thermal zones with small volumes that may not simulate well. The two largest space types will be at the ends of the bars to minimize having excessive exterior exposure on a zone with a small floor area. `Multiple Space Types - Simple Sliced` is an earlier method that pre-dates the individual sliced stories. The logic is similar but it puts all space types on every building story and creates multiple stories with the exact same slicing logic. `Single Space Type - Core and Perimeter` is not sliced up by space type and isn't relevant for building types with multiple space types. If you do have a building type with only a single space type, like small or medium office, the multiple space type methods will still work. The single space type method will eventually be deprecated.
|
247
261
|
|
248
262
|
![Individualy Sliced](./docs/bar_sliced_indiv.png?raw=true)
|
249
263
|
*Multiple Space Types - Individual Stories Slice method that has been used through the examples above*
|
@@ -254,27 +268,26 @@ The ability to model what is essence party floor/ceilings in your model are cont
|
|
254
268
|
![Single Core Perimeter](./docs/bar_single_core_perim.png?raw=true)
|
255
269
|
*Single Space Type - Core and Perimeter, should not be a reason to use this*
|
256
270
|
|
257
|
-
- The `Double Loaded Corridor`
|
271
|
+
- The `Double Loaded Corridor` argument when enabled, take a circulation space type, when it exists, and pair it with the default space type, and will create a double loaded corridor for the space division and thermal zoning, instead of the typical sliced core and perimeter zoning. This not only alters the geometry of the internal division, but creates a hybrid slice that instead of being a single space type, contains a circulation space type running down the center of the bar, surrounded by spaces of another space type. For an example, with a primary school the corridor will be paired with the classrooms. The width of the corridor is determined to achieve the proper space type ratios of the two space types.
|
272
|
+
- Not enabled for the DEER Building Types as of OpenStudio 3.2.
|
258
273
|
|
259
274
|
![Double Loaded Corridor](./docs/bar_double_loaded.png?raw=true)
|
260
275
|
*Double Loaded Corridor with classroom and corridor for secondary school.*
|
261
276
|
|
262
|
-
- The `Choose Space Type Sorting Method` only comes into play when you are modeling a building with more than one building type. With `Size` selected the space types are organized by size, independent of the building type, with smaller space types on lower stories and larger space types on higher stories. `Building Type > Size` is a newer method that first sorts by
|
277
|
+
- The `Choose Space Type Sorting Method` only comes into play when you are modeling a building with more than one building type. With `Size` selected the space types are organized by size, independent of the building type, with smaller space types on lower stories and larger space types on higher stories. `Building Type > Size` is a newer method that first sorts by building type, putting smaller building types on lower stories, and then within a building type will sort by size. An example use case for this method is when modeling a 4 story building with 25% office and 75% large hotel. With the `Building Type > Size` value the first story will be entirely office, with the rest of the stories large hotel. If the `Size` value is selected, building types wll be mixed together.
|
263
278
|
|
264
279
|
![Sort Space Types by Building Types](./docs/story_sort.png?raw=true)
|
265
|
-
*Building Type > Size used to sort by
|
266
|
-
|
267
|
-
- `Use Upstream Argument Values` can be left at the default value of true for most cases. This argument shows up in a number of measures, and then intent is to enable the synchronization of arguments that may be used as a variable in a parametric study across multiple measures. Generally measure ahve uqniue argument names that don't exist, but some such ase `template` are used frequently. This argument, when set to true, will use the value of `Template` from an earlier measure in the workflow, if found, in place of what is entered as the value for this measure.
|
280
|
+
*Building Type > Size used to sort by building types, and then by space types.*
|
268
281
|
|
269
|
-
- `
|
282
|
+
- `Use Upstream Argument Values` can be left at the default value of true for most cases. This argument shows up in a number of measures, and then intent is to enable the synchronization of arguments that may be used as a variable in a parametric study across multiple measures. Generally a measures has unique argument names that don't exist in other measures, but some such ase `template` are used frequently. This argument, when set to true, will use the value of `template` from an earlier measure in the workflow, if found, in place of what is entered as the argument value for this measure.
|
270
283
|
|
271
284
|
## Development Comments
|
272
285
|
|
273
|
-
This measure relies on the openstudio-standards gem which is included in the OpenStudio CLI as well as a number of resources files listed below that are contained in the measure's `resources` directory. Other than the arguments almost none of the measure code is in the measure.rb file. The resource files are used by a number of measures and should be
|
274
|
-
|
275
|
-
|
276
|
-
|
277
|
-
|
286
|
+
This measure relies on the openstudio-standards gem which is included in the OpenStudio CLI as well as a number of resources files listed below that are contained in the measure's `resources` directory. Other than the arguments almost none of the measure code is in the measure.rb file. The resource files are used by a number of measures and should be updated from the shared library and not within this measure.
|
287
|
+
- os_lib_model_generation.rb
|
288
|
+
- os_lib_model_simplification.rb
|
289
|
+
- os_lib_geometry.rb
|
290
|
+
- os_lib_helper_methods.rb
|
278
291
|
|
279
292
|
___
|
280
293
|
|
@@ -282,6 +295,8 @@ ___
|
|
282
295
|
|
283
296
|
## Arguments
|
284
297
|
|
298
|
+
## Arguments
|
299
|
+
|
285
300
|
<% arguments.each do |argument| %>
|
286
301
|
### <%= argument[:display_name] %>
|
287
302
|
<%= argument[:description] %>
|
@@ -290,6 +305,9 @@ ___
|
|
290
305
|
**Units:** <%= argument[:units] %>,
|
291
306
|
**Required:** <%= argument[:required] %>,
|
292
307
|
**Model Dependent:** <%= argument[:model_dependent] %>
|
308
|
+
<% if argument[:type] == "Choice" && !argument[:model_dependent]%>
|
309
|
+
**Choice Display Names** <%= argument[:choice_display_names] %>
|
310
|
+
<% end %>
|
293
311
|
<% end %>
|
294
312
|
|
295
313
|
<% if arguments.size == 0 %>
|
@@ -47,9 +47,9 @@ require 'openstudio-standards'
|
|
47
47
|
# load OpenStudio measure libraries from openstudio-extension gem
|
48
48
|
require 'openstudio-extension'
|
49
49
|
require 'openstudio/extension/core/os_lib_helper_methods'
|
50
|
-
require 'openstudio/extension/core/os_lib_geometry
|
51
|
-
require 'openstudio/extension/core/os_lib_model_generation
|
52
|
-
require 'openstudio/extension/core/os_lib_model_simplification
|
50
|
+
require 'openstudio/extension/core/os_lib_geometry'
|
51
|
+
require 'openstudio/extension/core/os_lib_model_generation'
|
52
|
+
require 'openstudio/extension/core/os_lib_model_simplification'
|
53
53
|
|
54
54
|
# start the measure
|
55
55
|
class CreateBarFromSpaceTypeRatios < OpenStudio::Measure::ModelMeasure
|
@@ -75,6 +75,11 @@ class CreateBarFromSpaceTypeRatios < OpenStudio::Measure::ModelMeasure
|
|
75
75
|
return 'The building floor area can be described as a footprint size or as a total building area. The shape can be described by its aspect ratio or can be defined as a set width. Because this measure contains both DOE and DEER inputs, care needs to be taken to choose a template compatable with the selected building types. See readme document for additional guidance.'
|
76
76
|
end
|
77
77
|
|
78
|
+
# used to populate taxonomy in readme.md
|
79
|
+
def taxonomy
|
80
|
+
return 'Envelope.Form'
|
81
|
+
end
|
82
|
+
|
78
83
|
def arguments(model)
|
79
84
|
args = OpenStudio::Measure::OSArgumentVector.new
|
80
85
|
|
@@ -3,8 +3,8 @@
|
|
3
3
|
<schema_version>3.0</schema_version>
|
4
4
|
<name>create_bar_from_space_type_ratios</name>
|
5
5
|
<uid>3e988765-9673-46f8-9b65-99d5b86c2b22</uid>
|
6
|
-
<version_id>
|
7
|
-
<version_modified>
|
6
|
+
<version_id>29ef75fa-0a73-4a08-85bb-a421d8aebbf2</version_id>
|
7
|
+
<version_modified>20220505T182936Z</version_modified>
|
8
8
|
<xml_checksum>49BEF039</xml_checksum>
|
9
9
|
<class_name>CreateBarFromSpaceTypeRatios</class_name>
|
10
10
|
<display_name>Create Bar From Space Type Ratios</display_name>
|
@@ -648,23 +648,29 @@
|
|
648
648
|
<usage_type>doc</usage_type>
|
649
649
|
<checksum>A64E1184</checksum>
|
650
650
|
</file>
|
651
|
+
<file>
|
652
|
+
<filename>LICENSE.md</filename>
|
653
|
+
<filetype>md</filetype>
|
654
|
+
<usage_type>license</usage_type>
|
655
|
+
<checksum>A21A3ED2</checksum>
|
656
|
+
</file>
|
651
657
|
<file>
|
652
658
|
<filename>README.md.erb</filename>
|
653
659
|
<filetype>erb</filetype>
|
654
660
|
<usage_type>readmeerb</usage_type>
|
655
|
-
<checksum>
|
661
|
+
<checksum>0BC848FD</checksum>
|
656
662
|
</file>
|
657
663
|
<file>
|
658
664
|
<filename>README.md</filename>
|
659
665
|
<filetype>md</filetype>
|
660
666
|
<usage_type>readme</usage_type>
|
661
|
-
<checksum>
|
667
|
+
<checksum>F153B1B9</checksum>
|
662
668
|
</file>
|
663
669
|
<file>
|
664
|
-
<filename>
|
665
|
-
<filetype>
|
666
|
-
<usage_type>
|
667
|
-
<checksum>
|
670
|
+
<filename>create_bar_from_space_type_ratios_test.rb</filename>
|
671
|
+
<filetype>rb</filetype>
|
672
|
+
<usage_type>test</usage_type>
|
673
|
+
<checksum>5A8700A0</checksum>
|
668
674
|
</file>
|
669
675
|
<file>
|
670
676
|
<version>
|
@@ -675,13 +681,7 @@
|
|
675
681
|
<filename>measure.rb</filename>
|
676
682
|
<filetype>rb</filetype>
|
677
683
|
<usage_type>script</usage_type>
|
678
|
-
<checksum>
|
679
|
-
</file>
|
680
|
-
<file>
|
681
|
-
<filename>create_bar_from_space_type_ratios_test.rb</filename>
|
682
|
-
<filetype>rb</filetype>
|
683
|
-
<usage_type>test</usage_type>
|
684
|
-
<checksum>61FDF1C4</checksum>
|
684
|
+
<checksum>CA930408</checksum>
|
685
685
|
</file>
|
686
686
|
</files>
|
687
687
|
</measure>
|
@@ -233,7 +233,7 @@ class CreateBaselineBuilding < OpenStudio::Measure::ModelMeasure
|
|
233
233
|
|
234
234
|
log_msgs(debug)
|
235
235
|
return success
|
236
|
-
end
|
236
|
+
end
|
237
237
|
|
238
238
|
# Get all the log messages and put into output
|
239
239
|
# for users to see.
|
@@ -253,6 +253,7 @@ class CreateBaselineBuilding < OpenStudio::Measure::ModelMeasure
|
|
253
253
|
msg.logChannel.include?('Translator') || # Forward translator and geometry translator
|
254
254
|
msg.logMessage.include?('UseWeatherFile') || # 'UseWeatherFile' is not yet a supported option for YearDescription
|
255
255
|
msg.logMessage.include?('has multiple parents') # Object of type 'OS:Curve:Cubic' and named 'VSD-TWR-FAN-FPLR' has multiple parents. Returning the first.
|
256
|
+
|
256
257
|
# Report the message in the correct way
|
257
258
|
if msg.logLevel == OpenStudio::Info
|
258
259
|
@runner.registerInfo(msg.logMessage)
|
@@ -267,7 +268,7 @@ class CreateBaselineBuilding < OpenStudio::Measure::ModelMeasure
|
|
267
268
|
end
|
268
269
|
@runner.registerInfo("Total Time = #{(Time.new - @start_time).round}sec.")
|
269
270
|
end
|
270
|
-
end
|
271
|
+
end
|
271
272
|
|
272
273
|
# this allows the measure to be use by the application
|
273
274
|
CreateBaselineBuilding.new.registerWithApplication
|
@@ -3,8 +3,8 @@
|
|
3
3
|
<schema_version>3.0</schema_version>
|
4
4
|
<name>create_baseline_building</name>
|
5
5
|
<uid>4de56e21-b6cd-45d9-8466-862507d228b2</uid>
|
6
|
-
<version_id>
|
7
|
-
<version_modified>
|
6
|
+
<version_id>0b726224-752c-4961-9422-505c2e506f99</version_id>
|
7
|
+
<version_modified>20220505T182926Z</version_modified>
|
8
8
|
<xml_checksum>A514F332</xml_checksum>
|
9
9
|
<class_name>CreateBaselineBuilding</class_name>
|
10
10
|
<display_name>Create Baseline Building</display_name>
|
@@ -269,7 +269,7 @@
|
|
269
269
|
<filename>create_baseline_building_test.rb</filename>
|
270
270
|
<filetype>rb</filetype>
|
271
271
|
<usage_type>test</usage_type>
|
272
|
-
<checksum>
|
272
|
+
<checksum>56AD4C78</checksum>
|
273
273
|
</file>
|
274
274
|
<file>
|
275
275
|
<version>
|
@@ -280,7 +280,7 @@
|
|
280
280
|
<filename>measure.rb</filename>
|
281
281
|
<filetype>rb</filetype>
|
282
282
|
<usage_type>script</usage_type>
|
283
|
-
<checksum>
|
283
|
+
<checksum>70026B27</checksum>
|
284
284
|
</file>
|
285
285
|
</files>
|
286
286
|
</measure>
|
@@ -3,8 +3,8 @@
|
|
3
3
|
<schema_version>3.0</schema_version>
|
4
4
|
<name>create_deer_prototype_building</name>
|
5
5
|
<uid>752055bd-10d9-4ede-8a35-18487fedf579</uid>
|
6
|
-
<version_id>
|
7
|
-
<version_modified>
|
6
|
+
<version_id>8b85f282-639e-4a80-af9d-cdfefeb38c47</version_id>
|
7
|
+
<version_modified>20220505T182926Z</version_modified>
|
8
8
|
<xml_checksum>A514F332</xml_checksum>
|
9
9
|
<class_name>CreateDEERPrototypeBuilding</class_name>
|
10
10
|
<display_name>Create DEER Prototype Building ALPHA Version</display_name>
|
@@ -839,7 +839,7 @@
|
|
839
839
|
<filename>create_DEER_prototype_building_test.rb</filename>
|
840
840
|
<filetype>rb</filetype>
|
841
841
|
<usage_type>test</usage_type>
|
842
|
-
<checksum>
|
842
|
+
<checksum>94E3EAF7</checksum>
|
843
843
|
</file>
|
844
844
|
</files>
|
845
845
|
</measure>
|
@@ -41,7 +41,7 @@ require 'json'
|
|
41
41
|
# load OpenStudio measure libraries from openstudio-extension gem
|
42
42
|
require 'openstudio-extension'
|
43
43
|
require 'openstudio/extension/core/os_lib_helper_methods'
|
44
|
-
require 'openstudio/extension/core/os_lib_schedules
|
44
|
+
require 'openstudio/extension/core/os_lib_schedules'
|
45
45
|
|
46
46
|
# start the measure
|
47
47
|
class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
@@ -206,7 +206,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
206
206
|
occupancy_profiles.setDefaultValue(string.join(', '))
|
207
207
|
args << occupancy_profiles
|
208
208
|
|
209
|
-
#
|
209
|
+
# NOTE: infiltration, setpoints, and hvac availability follow the same time parameters but use different values
|
210
210
|
|
211
211
|
# Make argument for infiltration_profiles
|
212
212
|
string = []
|
@@ -336,13 +336,14 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
336
336
|
# day_type specific gsub
|
337
337
|
temp_array.each_with_index do |string, i|
|
338
338
|
day_type = string.split('=>').first.delete(':')
|
339
|
-
|
339
|
+
case day_type
|
340
|
+
when 'default'
|
340
341
|
hoo_start = args['hoo_start_wkdy']
|
341
342
|
hoo_end = args['hoo_end_wkdy']
|
342
|
-
|
343
|
+
when 'saturday'
|
343
344
|
hoo_start = args['hoo_start_sat']
|
344
345
|
hoo_end = args['hoo_end_sat']
|
345
|
-
|
346
|
+
when 'sunday'
|
346
347
|
hoo_start = args['hoo_start_sun']
|
347
348
|
hoo_end = args['hoo_end_sun']
|
348
349
|
end
|
@@ -364,7 +365,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
364
365
|
final_string = temp_array.join(']], :')
|
365
366
|
|
366
367
|
hash = eval("{#{final_string}}").to_hash
|
367
|
-
rescue SyntaxError =>
|
368
|
+
rescue SyntaxError => e
|
368
369
|
runner.registerError("{#{final_string}} could not be converted to a hash.")
|
369
370
|
return false
|
370
371
|
end
|
@@ -478,7 +479,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
478
479
|
time_values_used << time_value_pair[0]
|
479
480
|
end
|
480
481
|
end
|
481
|
-
items_to_remove.
|
482
|
+
items_to_remove.reverse_each do |i|
|
482
483
|
time_value_pairs.delete_at(i)
|
483
484
|
end
|
484
485
|
|
@@ -500,11 +501,12 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
500
501
|
end
|
501
502
|
|
502
503
|
# add on text needed for createComplexSchedule
|
503
|
-
|
504
|
+
case day_type
|
505
|
+
when :saturday
|
504
506
|
time_value_pairs.insert(0, 'Sat')
|
505
507
|
time_value_pairs.insert(0, '1/1-12/31')
|
506
508
|
time_value_pairs.insert(0, 'Saturday')
|
507
|
-
|
509
|
+
when :sunday
|
508
510
|
time_value_pairs.insert(0, 'Sun')
|
509
511
|
time_value_pairs.insert(0, '1/1-12/31')
|
510
512
|
time_value_pairs.insert(0, 'Sunday')
|
@@ -623,6 +625,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
623
625
|
next if space_type.standardsSpaceType.get != args['standards_space_type']
|
624
626
|
end
|
625
627
|
next if space_type.spaces.empty?
|
628
|
+
|
626
629
|
space_types_to_alter << space_type
|
627
630
|
end
|
628
631
|
|
@@ -646,6 +649,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
646
649
|
# remove schedule sets.
|
647
650
|
model.getDefaultScheduleSets.each do |sch_set|
|
648
651
|
next if sch_set == default_schedule_set
|
652
|
+
|
649
653
|
sch_set.remove
|
650
654
|
end
|
651
655
|
|
@@ -703,6 +707,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
703
707
|
if args['alter_swh_wo_space']
|
704
708
|
model.getWaterUseEquipments.each do |water_use_equipment|
|
705
709
|
next if water_use_equipment.space.is_initialized
|
710
|
+
|
706
711
|
water_use_equipment_to_alter << water_use_equipment
|
707
712
|
end
|
708
713
|
end
|
@@ -860,7 +865,7 @@ class CreateParametricSchedules < OpenStudio::Measure::ModelMeasure
|
|
860
865
|
hash = process_hash(runner, args['hvac_availability_profiles'], args, profile_override, ruleset_name)
|
861
866
|
if !hash then runner.registerError("Failed to generate #{ruleset_name}"); return false end
|
862
867
|
winter_design_day = [[24, 1]] # TODO: - confirm proper value
|
863
|
-
summer_design_day = [[24, 1]] #
|
868
|
+
summer_design_day = [[24, 1]] # TODO: - confirm proper value
|
864
869
|
default_day = hash[:default]
|
865
870
|
rules = []
|
866
871
|
rules << hash[:saturday]
|
@@ -3,8 +3,8 @@
|
|
3
3
|
<schema_version>3.0</schema_version>
|
4
4
|
<name>create_parametric_schedules</name>
|
5
5
|
<uid>befa8099-c6a7-4045-8792-53fc7124b862</uid>
|
6
|
-
<version_id>
|
7
|
-
<version_modified>
|
6
|
+
<version_id>41022be2-227f-4c93-8ff0-8970d23eef8e</version_id>
|
7
|
+
<version_modified>20220505T182933Z</version_modified>
|
8
8
|
<xml_checksum>03F02484</xml_checksum>
|
9
9
|
<class_name>CreateParametricSchedules</class_name>
|
10
10
|
<display_name>Create Parametric Schedules</display_name>
|
@@ -332,13 +332,13 @@
|
|
332
332
|
<filename>measure.rb</filename>
|
333
333
|
<filetype>rb</filetype>
|
334
334
|
<usage_type>script</usage_type>
|
335
|
-
<checksum>
|
335
|
+
<checksum>374552A6</checksum>
|
336
336
|
</file>
|
337
337
|
<file>
|
338
338
|
<filename>create_parametric_schedules_test.rb</filename>
|
339
339
|
<filetype>rb</filetype>
|
340
340
|
<usage_type>test</usage_type>
|
341
|
-
<checksum>
|
341
|
+
<checksum>691911FE</checksum>
|
342
342
|
</file>
|
343
343
|
</files>
|
344
344
|
</measure>
|